Technical Monitoring for IDM 7.2

Hello,
I'm trying to configure Technical Monitoring (System Monitoring) for my SAP NW 7.2 IDM system. Any help will be appreciated. I've completed the MSC for the Java Component of NW IDM.
Regards,
Pinac

Hi Pinac,
Not sure if this is supported just yet for Techncial Monitoring. Please see following SAP Link:
http://wiki.scn.sap.com/wiki/display/TechOps/SysMon_SupportedProducts?original_fqdn=wiki.sdn.sap.com
Kind regards,
Roland

Similar Messages

Technical Monitoring for Logical host name

Dear experts,
We are in mid of technical monitoring finalisation.
one of the interesting thing which i found with respect to the logical host name, we installed SMD agent on Virtual host name and our system is not with HA environment and no clustering. It is just a system with single instance.
During the managed system configuration all the physical and logical host name reported by SMD autodiscovery, all went fine. But in Technical monitoring shows only virtual host name with the updated alerts , and logical host name only shows grey alert.
virtual host shows alert here
logical host name shows grey
how can i get alert displayed for logical host name too? do i need to do some settings at the OS level , could you guide us?
Thanks
Jansi

Hi Giri Raju Ayyagari,
I am sorry, seems you are still not able to get my issue, moreover you get diverting my issue
Here the problem is not at all related to agents on fly. thats the separate topic.
We are having issue on Logical Host names where there is no HA environment, means only One logical host name created.
I raised to SAP, l will update once the update from SAP given.
Best regards
Jansi

Technical Monitoring for trex server ?

Hi Experts,
As I need to monitor my SAP TREX system using solman so i have started it with creating a new system solman's managed system configuration and at at initially it asks for the system Id and system Name(GUID,hexadecimal,36 char format).So how can i retrieve the system name in hexadecimal format .and also can i get the configuration document for the same.
Thanks,
Satheesh E

Hi,
You can monitor the TREX using Tech Mon, SAP already has the template available for TREX. All you need to do is install Diag Agent on TREX server and register it in Solution Manager. Your system id for TREX will be automatically created in LMDB. You need not create it manually.
Regards,
Vivek

Is SAP-OSS RFC Configuration required for Technical Monitoring ?

Hi Experts,
I have not configured the SAP-OSS rfc connection.Is it required for setting up the technical monitoring(Tcode : SOLMAN_SETUP).
If Yes can you please help me in solving the above problem.Our aim is to configure technical monitoring for system and self-monitoring.
Thanks In Advance,
Satheesh E

Hello,
I am assuming you are speaking about 100 concurrent users and not the entire company userbase.
Core i5 (although is dual core underneath) is generally meant for desktops, having said this, please note that its difficult to arrive at any recommendation based on simply userbase. You need to have more data with you with respect to amount of transactions, concurrent users, peak period, load during peak period etc.
You need to use SAP's quicksizer to calculate the amount of SAPS for your production servers, SAPS is the unit used to calibrate your hardware for running SAP Applications.
If you provide your SAPS value to hardware vendor, they will advise what CPU rating and how many CPUs you need. They will infact tell you the entire configuration that you need.
you can also buy the following book:
http://www.sap-press.com/products/Sizing-SAP-Systems.html
Regards,
Siddhesh

Technical Monitoring one template used for production and non-production system.

Dear All,
Is there a way to have one template in Solman Technical Monitoring for production system and non-production system with different alerts ? For example if it exceeds a threshold for production system it will trigger red alert or set automatically an incident and if it's non prod system it will go to yellow warning alert ?
Regards
Lukasz Goral

Hi Likasz,
You first create and customize the template, and then assign to a system.
If it was selecting a system and then customizing a template, then may be such functionality makes sense.
So, I don't think that is possible.
Better would be copy the template used for production to non-production and make the adjustment to it.
Regards,
Divyanshu

Technical Monitoring - Metric Sybase Performance

Hi experts,
are there any performance-metrics in technical monitoring for database "Sybase"?
I found metrics like physical reads and writes or logical.
But they are only for temp-db usage.
So I think not really relevant for performance, or are the relevant?
I am not really sure what it means.
What I am looking for is like, how many reads/writes per seconds and what was the average time for <SID>-DB.
Also I don't get any results for Disk Reads/Writes per Seconds.
Kind regards

Hello Giri,
I had a discussion with this about SAP.
And no, it is not possible to create customer metrics regarding ASE-performance.
All ASE-performance metrics get calculated within ST-PI coding and are hardcoded.
So there is no kind of "extractor" like CCMS which can be used.
Sure, it would be possible to code your own performance-calculation, but therefore you need to access the ASE-data, which I don't know how to realize.
However, in SP12 a lot of new ASE-performance metrics will be delivered.
So looking forward.

Where do I set the polling frequency for Technical monitoring in Solution Manager 7.1 SP10 ??

Hi All,
I am customizing my technical monitoring templates and would like to know :
1. Where we can set the polling frequency for each metrics for triggering alerts through Technical monitoring in Solution Manager 7.1 SP10 ??
2. Is it like each time our threshold is breached, it will send an alert irrespective of polling frequency ??
I know the data collection interval time for each metrics in technical monitoring template but the as per my observation the polling frequency is different.
Need your guidance.
Regards,
Manish K

Hi Javier,
Refer to the documentation 'MAI Alert Consumer BAdI Interface' under
http://wiki.scn.sap.com/wiki/display/TechOps/Alert+Consumer+BAdI+Interface link for information on the input to the BAdI.
Kind regards,
Roland

Technical Monitoring - Metric for Mail (SOST)

Hi experts,
does anybody know, if there is a metric in Technical Monitoring which checks the EMails of SOST?
I mean especially, the amount of mails which are failed.
Otherwise I will develop a customer metric.
Kind regards

Hi Christian,
I haven't used for any template for SOST and not sure even on it's existence in delivered templates.
However, you have this thing RZ20 to check number of emails in queue.
You can use the metric in RZ20 and migrate it in Tech Moni.
Make and test a custom alert using the below documents
CCMS to Technical Monitoring Migration: Use case - Monitoring OS Processes in Technical Monitoring
http://wiki.scn.sap.com/wiki/download/attachments/269157890/How+to+create+custom+CCMS+metrics+in+MAI.pdf?original_fqdn=w…
Regards,
Divyanshu

SAP Technical roles and IDM Business roles mapping

Hi Guys
Just wondering if there is an easy way to export SAP Positions and create them automatically as Business Roles in IDM and the SAP technical roles that are related to that corresponding position into privledges assigned to that Business Role. Or am I going about this the wrong way? What do you normally do in terms of getting all your sap technical roles from the sap system and assigning them to business roles in IDM. Any help on this is much appreciated?
Cheers
Leo

Thanks Matt,
I think get I the picture now
One thing that I am still not sure about is how the sap abap technical roles or profiles are provisioned through workflow
Here is what Ive done so far
1. HCM data loaded into productive identity store via vds
2. Did an initial load of the abap system into the productive identity store (now the technical roles and profiles are loaded as privileges in the idstore)
3. Through workflow I select a user that already has an abap account and assign that user some additional sap technical roles, for e.g. sap_all and sap_new. The corresponding privileges for these roles are namely PRIV:PROFILE:ECX:SAP_ALL and PRIV:PROFILE:ECX:SAP_NEW .
4. For the provisioning to occur so that these new privileges are reflected in the ABAP system for this user, I have used the setABAPRole&ProfileForUser task from sap provisioning framework folder and set it as the add/mod/del event task for the MXREF_MX_PRIVILEGE attribute. That way whenever a privilege is added to a user account the setABAPRole&ProfileForUser task will run and the sap_all and sap_new profiles will be added in the backend. This way I can avoid setting a provisioning task for each abap privilege that gets loaded.
But it should be obvious now that there is a flaw with this kind of setup, because all non abap privileges that get added or removed will trigger the setABAPRole&ProfileForUser task anyway because the privileges use the same attribute i.e.MXREF_MX_PRIVILEGE. So it brings me to the question how do you provision abap technical roles or profiles through workflow without setting a provisioning task for each abap related privilege.
Thanks again for all your help!
Leo

Configure Interface channel monitoring for PI in SOLMAN 7.1

Hi Experts,
I am configuring interface channel monitoring for PI in SOLMAN 7.1.In step 5 (Define scope) it is asking to select scenario.I can see all PI systems (Dev,QA and PRD) is listed in the table with "monitoring and alerting setup status" as yellow.when I select PI (prod) and proceed , in step 6.3 (Interface channel Monitoring config) I don't find any channel name in table.I need your support to clear my understanding on this.
1)My objective is to monitor all the interfaces that are existing between PI system and other SAP as well as non SAP systems (that include JDBC connections also).How can find all these interfaces in solman while doing Interface channel monitoring config?
2)I am not sure if I have understood correctly that I need to create scenario that includes technical systems between which Interface channel are to be monitored. If I am correct then how can I bring the technical system to SOLMAN SLD from Local SLD of PI(prod).Here I am not getting option to synchronize SOLMAN SLD from PI Local SLD. Even Import option is also not there. Do I need to create all the Technical systems (present in PI) to SOLMAN SLD manually?
If my understanding is not correct then please guide me through steps to do the configuration to achieve my objective.
Thanks
Aditya Roushan.

yes, the problem solved. thanks for your replies all.
the users SLDDSUSER and SLDAPIUSER got locked, I changed it in su01.
and I created rfc in SM59 for SAPSLDAPI and LCRSAPRFC and create the same in JCo RFC provider.
both are working.
but iam facing new problem.
I have solution manager 7.1 system and I configured local SLD. I did not connect any managed system as of now.
after all the trouble shooting, SLDAPICUST and SLDCHECK is fine but
the error is
"Functional call returned exception code 3"
"Access to XI Profile currently disrupted.
I have solution manager 7.1, I did not configure managed systems as of now. is this error belongs to solution manager 7.1 or for PI system.
can u please guide me how to trouble shoot this error. check the following screen shot for reference.
thanks in advance.

Did hp accept broken lcd monitors for exchange

did hp accept broken lcd monitors for exchange

Hello thiru_moorthy,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your LCD Monitor is broken, and I would be happy to assist you!
Since your hardware is broken, I recommend contacting our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
By contacting our technical support, you will be able to find out your specific options for your broken monitor, and how to proceed past this point.
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Technical Monitoring - DBA Connection red (failure)

Hi experts,
I have the following problem.
In technical monitoring I have one managed system, on which the DB availability check is not working.
The DB is a Sybase ASE 15.7
In solman_setup->system config the DB connection is configured well (green status).
Also if I open the dbacockpit of solution manager, I can see the DB of the managed system and the connection checks are working fine.
But in technical monitoring, I get the alert that the DB is not available and also that "DBA Cokcpit Connection Status" = failure.
If I go to the details of the alert, I also can't see the problem.
I did already remove and add the system more often. Further I also did remove the connection in dbacockcpit and created it again.
But now I don't have any further ideas.
Hopefuly somebody can help me.
Thank you

Hi Christian,
1st let us find the error related to this.
Follow below KBA to find out the error that is causing the issue.
2016715 - Metric Troubleshoot using MAI Tools
Since, you are motioning a remote ASE database, make sure the below KBA is read and applied.
1532253 - SYB: Remote DB Monitoring for SAP Sybase ASE
Regards,

Best monitor for animation

Hi, I'm working on a big animation project. I'll be doing everything from the concept art to the actual animation, but I need a new monitor. My budget is around $350. At the moment I'm planning to buy the Samsung LS27A350HS. I want a 27" inch monitor for this kind of work, and I was told this was the best for the price range. What are you thoughts? Is there a better monitor I should be looking at? I found a used Dell 2707wfp for $400, but I don't like the idea of not having a warranty.

Producing and creating animations are not the same as roviding technically precise media to outlets. If your color space is out of gamut for a specific delivery media, yoru work will be rejected or it will be modified by someone who does not have your best interests at heart.
You already have what you need, you've just never opened it up!
Synthetic Aperture supplies an app/plugin with After Effects called Color Finesse. Way cool.
The Color Finesse interface is divided into four main windows: the Analysis Window, the Image Window, the Settings Window, and the Color Info Window. Each window has a set of tabs which can be clicked to select panes within that window, with the exception of the Color Info Window, which has no tabs. As you work, you’ll find yourself switching between different panes, depending on the color correction operation you’re performing. Dividing the screen into different windows ensures that you’ll be able to see the information you need as you make color correction adjustments.
The Analysis Window contains a number of displays that are intended to allow you to view the image you are correcting in an objective fashion. Included are traditional displays you would find in the typical telecine bay, including several different styles of waveform monitors and a vectorscope, as well as more specialized displays such as histogram displays and a level curve display. Because it is often useful to see several of these displays simultaneously, Color Finesse also includes a Combo pane which incorporates four displays of your choice on one pane.
bogiesan

SOLMAN 7.1 Technical Monitoring - System Monitoring - Host Grey

Hi All,
Wondering why my host monitoring in system monitoring is greyed out? I managed to get Technical Systems, Database and others work well but not Host Monitoring.
I checked SAPHOSTAGENT is running fine, DAA and wily as well. Also, all updated to latest version. Template assigned to Host monitoring as well. All troubleshooting and logs leaves no clue.
Any idea as i've run out of ideas.....
Cheers,
Nicholas Chang

Hi Roland,
I did check and below are what it returns:
Configuration XML 7.01.01.20120305075238 did not reach the agent. Agent XML:
No measured values have been reported by data provider.
No measured values were ever calculated.
However, when i click on the "FIX" icon, nothing appears........
I've changed the metric for "Host" managed object, assign and activate, rerun technical monitoring setting.
i dont find any useful thread on SDN nor SMP. I've drill to landscape browser, agent log, daa log, extractor and etc but to no avail. However, i did get host info on Wily and E2E.... just wondering???
Any clues?
Thanks,
Nicholas Chang

Disable EWA Alerts ins Technical Monitoring

Hello,
I would like to disable certain "Early Watch Alert" Alerts in the Technical Monitoring application of Solution Manager 7.1.
E.g. in my setup we get the warning that EWA:Security-Alert: "Security-related SAP notes have not been applied"...
Since this will be the case for most systems most of the time I don't want the warning to appear in the technical monitoring Dashboards.
I figure, that these alerts propably have something to do with "EWA Integration into MAI" and also that a "Early Watch Alert Template" seems to exist.
Unfortunately I'm not able to configue this template.
Do any of you know where "EWA Integration into MAI" or the above mentioned template can be customized?
Best Regards,
Thorsten

Hi,
Other way, you can manually deactivate metrics from the Technical monitoring setup, template maintenance-> select the template -> uncheck the EWA metrics.
Thanks
Jansi

Technical Monitoring for IDM 7.2

Similar Messages

Maybe you are looking for