Technical setting related Query?

Hi Friends
In MM-Xi-SUS scenario, do we need to define logical systems,RFC destination, backend systems, def Port for all three systems in all three systems. Do we need to loginto their own server and client and perform these settings
Regards
Emil

Hi
Yes you need to perfrom these in ECC and SRM (SUS client) individually
Rgds/ Kiran

Similar Messages

  • Viewlink between Custom VO "Cannot set user query to view"

    We have an application where we have extended custom VO and EO’s to get data from flat files. It all looks fine till we create a viewlink for a LOV with two related VO’s. The viewlink VO fails we get message of the form -Cannot set user query to view "CustomVO1" because it is a destination in a view link”. Are there any methods to override in the custom VO/EO or any parameter to be added to configs. Has someone tried this out

    Thanks for the update and for sharing the solution!
    Regards,
    Hussein

  • Re: Info set and query transport under same request number

    Hi,
      I would like to know the details about info set and query transport from development to quality using SAP Query:  Trnasport tool.my quesion is,
    Can i create all info sets and related queries under same request number or will it be created in diffrent request numbers?Please respond any body to my question.
    Regards,
    Suresh Kumar.

    No it is possible as per SAP.
    Please read follwoing help-
    http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    It is talking abou the Special Features of InfoCubes in InfoSets.
    For queries based on an InfoSet with an InfoCube, the system decides at runtime whether aggregates can be used for the InfoCube. This is the case if all the required InfoObjects of the InfoCube exist in an aggregate. The following InfoObjects are required:
    The key figures of the InfoCube selected in the query
    The characteristics of the InfoCube selected in the query
    The characteristics required for a join with other InfoProviders in the InfoSet.
    Furthermore, as a prerequisite for using aggregates, all the data required by an InfoCube must be readable using logical access. For an InfoCube within an InfoSet with InfoCubes, it is no longer possible to read part of the data from one aggregate and part of the data from another aggregate or the InfoCube itself.

  • Regarding Technical Setting of Tables.

    Hey Hi Experts,
    I have following issues within my implementation project.
    1. On the PRD server the data is huge when i see Transaction  tables like VEPO or LIPS I see that the size  Category specified ( in my case vepo is set for Catagor 4 ie 81,000 to       320,000 records but it far exceeds the limits current is 6 lacks )  in the technical setting is very low as compared to the data size  in them  ( Will that matter  my Reports performance )
    2.  There is a radio button goup where its set to "NO Buffring allowed "  (Caution ..!)
    I need you suggession for the following do i need to adjust the technical setting of  the tables if my data size is exceding the limit specified record count .
    If ineed to set it  What type of buffring will i choose.
    Plz experts...:)

    1) When you activate a table for the first time the system needs to know how much space it needs to reserve for your table. Your definition tells the system the maximum size in bytes for each record. All the system needs to know is how many records (a ball park figure) your table is likely to have. This is what you enter in the size (category). This does not mean that your table cannot exceed that size. When your table is about the exceed the specified size the system needs to allocate more space. How does it know how much space it needs to allocate? Again it looks at this technical setting value. In short the category indicates to the system the amount of disc space to allocate/reallocate your table.
    Will this effect your query speed? No.
    2) Buffering determines how many records are transferred from the database to the memory. If you use full buffering any query to the table will cause all the records in the table to be transferred into your buffer. This setting is acceptable for smaller tables. You would not want to do this with larger tables because you will not have enough space in the memory to read all the data. The partial buffering transfers all the records that qualify by part of the primary key. For example if you are reading VBAP (Sales Order Line table), if you repair the table to have partial buffering and you read one sales order (VBELN) the system automatically transfers all the data of all the lines (POSNR) of the sales order from the database to the buffer.
    Buffering helps improve performance but careful thought needs to be put into this and besides it is not advisable to repair any SAP tables.
    The best solution for large tables is archiving. The SAP R/3 system should not be used to view reports on historic data. We have the BW system for that. The BW system is designed to be flexible with data and can quickly give you the historical reports you desire. It is a best practice to archive large tables every 2 years and use the BW system for the historical data analysis.

  • SPDD - Technical setting issue on BNKA table

    Hi All,
    We are in the process of 4.7 to ECC 6.0 upgrade.
    Please see the SPDD screen shot
    http://docs.google.com/Doc?id=dctrtng5_0dqxqcw
    In this what can we do with the issue related to BNKA table. It shows it is a warning with Technical setting.
    I have verified with source system version of BNKA table technical settings with the upgrade shadow system BNKA table technical settings . I dont find any difference .
    Please let me know what can i do .
    Regards,
    Reddy

    Hi ,
    Thanks for reply.
    Please find the technical settings in my system
    Data class APPL0 Master data, transparent tables
    Size category 2 Data records expected: 8.000 to 32.000
    and buffering not allowed
    I checked both systems- sanpit system and the shadow system verified is there any changes in technical settings ... I dont find any changes in this ...
    But in the screenshot of SPDD it is showing as warning under without modification adjustments.
    If it is a warning can we ignore this and can add this to transport . or what is suggested ..
    I dont find any difference in both technical settings ... give me some idea..
    Cheers,
    Reddy

  • How can I related Query name with Query elements?

    Hello gurus!
    I am working with BI7, content technical, well I need to find out a solution where I can related Query name with query elements (KYF, CKY, Restricted Key Figures, var, etc)
    In master data 0tctquery, exist the query element, but, I can not related with object are from what query...
    Do you know how I can do it??? some solution???
    Best Regards

    "it is impossible to relate both tables" ???
    hmmm... these are exactly the tables the Query Designer uses to "build" up the query... so trust me, they do relate
    now to get this information in an InfoCube is a totally different thing... how do you expect to report on this if you should get it in an InfoCube? let's take a simple example... assume you have a query (QUERY_1) which looks like:
                                      Sales  Sales
    Sales Org Customer    Qty      Value
    1000         ABC           10 PC  500 €
    1000         DEF             5 PC  250 €
    in your Cube you would get:
    QueryName  QueryElement
    QUERY_1    0SALESORG
    QUERY_1    0CUSTOMER
    QUERY_1    ZSLSQTY
    QUERY_1    ZSLSVAL
    if you have free characteristics, you'll add more lines... same for variables, CKFs, RKFs, conditions, ...
    I guess it would be better to create a little ABAP report using the above tables (oh, you'll be needing a lot more tables if you wish more detail)

  • Converting Relational query to XML

    set serveroutput on
    This is the code of a query to convert a relational query to xml. This code runs fine when I place the where condition at the end. e.g. where h.hospital_id=1. however when i place no such condition it begins returning errors such as
    set serveroutput on
    set long 10000000
    set linesize 50000
    set lines 20000
    set pagesize 0
    set pages 5
    set feedback off
    set head off
    SET TRIMSPOOL ON
    set long 200000000
    set linesize 32000
    set pagesize 0
    set pages 0
    set feedback off
    set head off
    Select XMLELEMENT("have:HospitalStatus",XMLAttributes('urn:oasis:names:tc:emergency:EDXL:HAVE:1.0 edxl-have_cs01.xsd' AS
                                      "xsi:schemaLocation",
                                              'urn:oasis:names:tc:emergency:EDXL:HAVE:1.0' AS
                                      "xmlns:have",
                                    'http://www.georss.org/georss' AS
                                      "xmlns:n3",
                                    'http://www.opengis.net/gml' AS
                                      "xmlns:gml",
                                    'http://www.w3.org/2001/XMLSchema-instance' AS
                                      "xmlns:xsi",
                                    'urn:oasis:names:tc:ciq:xal:3' AS
                                      "xmlns:xal",
                                    'urn:oasis:names:tc:ciq:xnl:3' AS
                                      "xmlns:xnl",
                                    'urn:oasis:names:tc:ciq:xpil:3' AS
                                      "xmlns:xpil"                                        
         xmlagg(                    
         xmlelement("have:Hospital",
         xmlforest
              (     h.hospital_id,          
                   xmlforest(
                   xmlforest(
                   h.name,               
                   h.info,          
                   h.addresses     ,          
                   h.contact_numbers) as "OrganizationInformation",     
                   xmlforest(
                   h.geo_location) as "OrganizationGeoLocation",
                   h.comments) as "Organization"
                   xmlelement("have:EmergencyDepartmentStatus",
                   (select xmlagg(
                   xmlforest(
                             eds.date_updated,
                   xmlforest(
                             eds.ems_traffic_status,
                             eds.ems_traffic_reason) as "EMSTraffic",          
                   xmlforest(
                             tcl.url,
                             tc.date_updated,
                             tc.code_value,
                             tc.ems_capacity
                        ) as "EMSCapacity",     
                   xmlforest(
                             tcl.url,
                             tc.date_updated,
                             tc.code_value,
                             tc.ems_census) as "EMSCensus",
                             xmlforest(
                             eds.ems_amb_offload_status,
                             eds.ems_amb_offload_min) as "EMSAmbulanceStatus",
                             xmlforest(
                             eds.ems_air_offload_status,
                             eds.ems_air_offload_min )as "EMSAirTransportStatus"
                   from EmergencyDepartmentStatus eds,TriageCode tc,TriageCodeListURN tcl
                   where eds.hospital_id = h.hospital_id and tc.hospital_id = h.hospital_id and tcl.hospital_id = h.hospital_id)),     
                             xmlelement("have:HospitalBedCapacityStatus",
                   (select xmlagg(xmlelement("have:BedCapacity",
                   xmlforest(
                             mb.date_updated,
                             mb.bed_no,
                             mb.bed_type,
                             xmlforest(
                             mb.capacity_status,
                             mb.available_count,
                             mb.baseline_count,
                             mb.additional_24hr,
                             mb.additional_72hr) as "Capacity",
                             mb.comments
                   from MainBeds mb
                   where mb.hospital_id = h.hospital_id and mb.bed_no NOT IN(select mb.bed_no from MainBeds mb, SubBeds sb where mb.bed_no=sb.bed_no )
                   (select xmlagg(xmlelement("have:BedCapacity",
                   xmlforest(
                             mb.date_updated,
                             mb.bed_no ,
                             mb.bed_type,
                             xmlforest(
                             mb.capacity_status
                                                 ) as "Capacity",
                             mb.comments
                                  ),(select xmlagg(
                   xmlforest(
                                  sb.date_updated,
                                  sb.bed_no,
                                  sb.sub_bed_no,
                                  xmlforest(
                                  sb.capacity_status,
                                  sb.available_count,
                                  sb.baseline_count,
                                  sb.additional_24hr,
                                  sb.additional_72hr) as "Capacity",
                                  sb.comments
                                  )from SubBeds sb  where mb.bed_no = sb.bed_no and sb.bed_no=h.hospital_id )
                   from MainBeds mb
                   where mb.hospital_id = h.hospital_id and mb.bed_no in (select unique mb.bed_no from MainBeds md, SubBeds sb where sb.bed_no=mb.bed_no))
                   xmlelement("have:ServiceCoverageStatus",
                   (select xmlagg(
                   xmlforest(
                             scs.date_updated,
                             scs.burn,
                             xmlelement("CardiologySubType",
                                  xmlforest(scs.cardiology_invasive,
                                  scs.cardiology_non_invasssive)) as "CardiologyIndicator",
                             scs.dialysis,
                             scs.emergency_dept,
                             scs.hyperbaric_chamber,
                             scs.infectious_diseases,
                             scs.neonatology,
                             xmlforest(xmlforest(
                                  scs.neurology_invassive,
                                  scs.neurology_non_invasssive) as "NeurologySubType") as "NeurologyIndicator",
                             xmlforest(xmlforest(
                                  scs.obgyn_with_labor,          
                                  scs.obgyn_without_labor) as "OBGYNSubType")as "OBGYNIndicator",
                             scs.opthalmology,
                             scs.orthopedic,
                             scs.pediatrics,
                             xmlforest(
                                  xmlforest(scs.psychiatry_adult_general,
                                  scs.psychiatry_pediatric) as"PsychiatrySubType")as "PsychiatryIndicator",
                             xmlforest(
                                  xmlforest(
                                  sst.date_updated,
                                  sst.general_ward,
                                  sst.adult_general,
                                  sst.pediatrics,
                                  sst.orthopedics,
                                  sst.nuero_surgery,
                                  sst.facial,
                                  sst.cardio_thoracic,
                                  sst.hand,
                                  sst.reimplantation,
                                  sst.spinal,
                                  sst.vascular,
                                  sst.anesthesia) as "SurgerySubTypes") as "SurgeryIndicator",
                             xmlforest(xmlforest(
                             scs.ambulance_services,
                             scs.air_transport_services) as "TransportServicesSubType") as "TransportServicesIndicator",
                             xmlforest(xmlforest(
                             scs.trauma_service,
                             scs.trauma_service_level) as "TraumaCenterServicesSubType")as "TraumaCenterServicesIndicator"
                   from ServiceCoverageStatus scs, SurgerySubTypes sst
                   where scs.hospital_id = h.hospital_id and sst.hospital_id = h.hospital_id)),
                   xmlelement("have:HospitalFacilityStatus",
                   (select xmlagg(     
                   xmlforest(
                             hfs.date_updated,               
                             hfs.hospital_eoc_status,
                             hfs.hospital_eoc_plan,          
                             hfs.clinical_status,
                             xmlforest(
                                  dc.date_updated,
                                  dc.decon_capacity_status,
                                  dc.amb_patients_capacity,
                                  dc.non_amb_patients_capacity) as "DeconCapacity",
                             xmlforest(
                             mc.date_updated,
                             mc.morgue_capacity_status,
                             mc.morgue_capacity_units) as "MorgueCapacity",
                             hfs.facility_status,               
                             hfs.security_status,     
                             xmlforest(
                                  ah.date_update,
                                  ah.admissions,
                                  ah.discharges,
                                  ah.deaths) as "Activity24hr",
                             hfs.comments,
                             hfs.clinical_operations,     
                             hfs.resources_information
                   from HospitalFacilityStatus hfs,Activity24hr ah,MorgueCapacity mc,DeconCapacity dc
                   where hfs.hospital_id = h.hospital_id and ah.hospital_id = h.hospital_id and mc.hospital_id = h.hospital_id
                   and dc.hospital_id = h.hospital_id)),     
                   xmlelement("have:HospitalResourceStatus",
                   (select xmlagg(
                   xmlforest(
                             hr.date_updated,
                             hr.staffing,
                             hr.facility_operations,
                             hr.clinical_operations,     
                             hr.comments
                   from HospitalResourceStatus hr
                   where hr.hospital_id = h.hospital_id)),
              xmlforest(h.last_update_time) as "UpdateTime"
              ))).extract('/*')
    from hospital h;__________________________________________________________________________________________________________
    ERROR:
    ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00225: end-element tag "HOSPITAL_EOC_STATUS" does not match start-element tag "have:HospitalStatus"
    Error at line 1
    ORA-06512: at "SYS.XMLTYPE", line 111
    Edited by: 872489 on 14-Jul-2011 03:59
    Edited by: 872489 on Jul 14, 2011 9:11 AM
    Apologies for lack of formatting earlier

    Please repost this and use the tag with some decent formatting.
    See the FAQ Posting Guidelines on the main page of this XMLDB OTN Forum                                                                                                                                                                                                                                                                                               

  • SAP HR Technical Accounts related to payroll posting.

    Hi experts,
    I have a doubt in Assign Technical Accounts related to payroll posting.
    Menu Path IMG -> Payroll SG -> Reporting for Posting Payroll Results to Accounting -> Activities in the AC System -> Assigning Accounts -> Assign Technical Accounts
    Account key    Account (GL)
    1001               1307090
    *1307090 Clearing Account.
    My doubts are
    u2022     If I am maintaining a GL account as clearing account, is it applicable for the entire wage types across company codes?(As this config is not based on Co code,but based on Chart of accounts)
    u2022     Where these account keys we will be assigned in HR side to wage types / no need to assign?
    Regards
    Thomas

    Hi,
    My issue is not solved yet.
    I have tried that option now documents are splitting and there is no error in document creation, but now its a different  issue  of amt in that GL acc.
    My scenario is we are creating a new company code.So group of employees I need to move from one company to another.
    But their previous month claim needs to be posted in the old cost centre.
    Means when I am running Jan payroll (period 1), December claims which is created in Jan should processed and two documents has to be created. u2013Its is done now.-No issues.
    But now the new GL code (not assigned to any symbolic account) which is assigned for splitting ,in  the technical account is not displaying in the posting document.
    Example:-IT0015 record with origin as 15.Dec.2010, but created in Jan..
    In my document it is taking as       
    GL related to wage type u201C/552 Stat.net post u201C- as debit in period 1 Jan document .
    and
    GL related to wage type   u201C9xxx- staff out patient claimu201D u2013as debit in period 13 Dec document .
    Now question is what is the relevance of the GL given in the technical accounts, as nothing is posted in to that account?
    Edited by: Thomas Padiyara on Dec 3, 2010 11:17 AM
    Edited by: Thomas Padiyara on Dec 4, 2010 3:53 AM

  • The workbook report no authorization, but related query can show part data

    Dear All,
    We meet an error, The workbook report no authorization, but related query can show part data.
    We have a workbook, it have 1 queries, and when we key in condition to run it, in one field we put on one more condition(Z3XXX = ' WZO'  & ' WZA")(User didn't have authorization for this condition),  and workbook report no authorization.
    Then we checked  authorization check log and it show "You do not have sufficient authorization on Z3XXX = ' WCO'.
    But when we execute the related query with same condition. the query can open and show WZA's data.
    I'd like to know the reason.
    thanks & Best Regards,
    Kent Yu

    Dear All,
    We meet an error, The workbook report no authorization, but related query can show part data.
    We have a workbook, it have 1 queries, and when we key in condition to run it, in one field we put on one more condition(Z3XXX = ' WZO'  & ' WZA")(User didn't have authorization for this condition),  and workbook report no authorization.
    Then we checked  authorization check log and it show "You do not have sufficient authorization on Z3XXX = ' WCO'.
    But when we execute the related query with same condition. the query can open and show WZA's data.
    I'd like to know the reason.
    thanks & Best Regards,
    Kent Yu

  • How to set a query of VO in  Best-Effort Mode

    Hi, I'm using auto refresh property of VO, to refresh the LOV . But i get " java.sql.SQLException: ORA-29983: Unsupported query for Continuous Query Notification" error..
    So i want to set the query in best-effort-mode . May i know how to set it.
    here is my query that set to auto refresh.
    "SELECT DISTINCT YYYY FROM XXXXX"
    Query optimizer makes the above one as below.
    SELECT * FROM (SELECT DISTINCT YYYY FROM XXXXX) QRSLT WHERE ( ( (YYYY LIKE :vc_temp_1 ) ) )

    If you disconnect the PMU, you will have the option to go to tristate or your previous digital state, but not ground. Forcing 0V is probably the closest you can get to a GND like behavior. The default line state is tristate for this device, which will leave the line floating if there is no active driver.
    Kyle A.
    National Instruments
    High Speed Digital I/O Product Support Engineer - R&D

  • Set PO query for all users in POWL screen

    Dear All,
    In Purchase order work list (POWL) need to define a new query and set it for all the users.
    Request to please let us know how we can create and set that query in POWL for all users?
    thanks,
    mahesh.

    Dear All,
    In Purchase order work list (POWL) need to define a new query and set it for all the users.
    Request to please let us know how we can create and set that query in POWL for all users?
    thanks,
    mahesh.

  • Re:User group,info set and Query combination table

    Hi,
      I would like to know the combination table of User group,info set and Query.
    Can any body please respond to my question?
    Regards,
    Suresh Kumar.

    Hi,
    Check the tables starting with AQG*.
    Reward points if useful.
    Regards,
    Atish

  • Problem during the setting the query data source name in forms 6i

    We are now doing assignments in forms 6i actually there is a problem during setting the query data source name in run time.
    The problem is
    declare
    v_query varchar2(200),
    begin
    v_query :='(select empno,ename,deptno from emp where hiredate =' || control .value1 ||')';
    go_block('emp');
    set_block_property('emp',query_data_source_name,v_query);
    end;
    that bolded area is the problem that ia varchar value the single qoutes embedded with that value.how can i embedded single qoutes in that concatenation.
    That is now query will run like select empno,ename,deptno from emp where hiredate =control.value
    But we need like select empno,ename,deptno from emp where hiredate ='control.value'
    Message was edited by:
    Punithavel

    Thanks for your response
    We fixed the error
    and the answer is
    declare
    v_query varchar2(200),
    begin
    v_query :='(select empno,ename,deptno from emp where hiredate = ' ' ' || control .value1 ||' ' ' ) ' ;
    go_block('emp');
    set_block_property('emp',query_data_source_name,v_query);
    end;

  • Multi-part related query reports

    http://download-east.oracle.com/docs/html/B10310_01/orbr_concepts1.htm#1012365
    Can someone provide me better info about 'Multi-part related query reports '

    Hi,
    yes you can have multiple query in your report. So you have multiple groups in your data model. Then you must put multiple repeating frames in your layout in order to extract data from your queries, selecting the desired group in the source property of your repeating frame.
    Bye
    Raffy

  • In some computers I cannot find "Switch Page Direction" on the shortcut Menu or "View" Menu. Is there any setting related to this subject?

    Hi
    I have a problem with my firefox browser. please Help me!
    In some computers I cannot find "Switch Page Direction" on the shortcut Menu or "View" Menu. Is there any setting related to this subject?
    thanks

    In order to change your Firefox Configuration please do the following steps :
    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''' to continue to the about:config page.
    # Look for '''bidi.browser.ui''', change its value to '''true''', restart Firefox, then right click to see the '''Switch Page Direction'''

Maybe you are looking for