Technical system for integration server

hi all
what are the steps involved in creating a technical system for integration server?what is the role of RZ70 in creating technical system for integration server?
regards
bhasker.

Hi
Technical systems should be registered by calling transaction RZ70 in technical system. Activate the profile & excute the job.
Make sure that you have provided correct SLD Host name & Gateway (Either central or local on XI).
Once you execute this function a default background job will be scheduled which will run after every 12 Hrs.
Cheers
Rakesh

Similar Messages

No destination for Integration Server found - XI 2.0

Hello,
I have developed a few java proxies and have had good luck using the jpf.properties file. Now, as we would like to set up more of a production scenario we are in need of moving over to the dbconnect.properties and technicalID.properties. The problem is when switching over to these files I received the "No destination for Integration Server found" error. So first off I would like to make sure we have the files configured correctly.
dbconnect.properties
hostname=xipsys
systemNumber=03
user=xiusr
password=xipswd
client=300
language=EN
... the dbconnect.properties file is correct I believe.
technicalID.properties
SAPTechnicalSystemIdentification=TS_MyTechnicalSystemName.SystemHome.MyPCName
... the TS_MyTechnicalSystemName is the technical system that I created in the SLD. MyPCName is my computer name as this is where I'm running the java proxies from.
First off, does it look like my files are configured properly?
Second, in the SLD I've configured my technical system and also a business system with similar names and specified the host as MyPCName. Is this correct?
I've also noticed that when I remove the files completely from my system I get the exact same error message however they are in the right location and have the correct names. Is there anyway to get a better error message out of the system? I know the files are in the right location cause if I use the jpf.properties in that location it works.
thx
XI 2.0

Well it's getting a lot closer. I'm getting a different error now and its showing up in tx SXMB_MONI. The error I get is...
ROUTING.NO_SENDER:Unable to find a sender
In the monitor it shows that there was a message pushed but it's red flagged and there is no sender/receiver information. Is there anything else I need to add to the java proxies?
The following is my latest configuration ....
dbconnect.properties looks like
hostname=myXIServer
systemNumber=03
user=XILDUSER
password=password
client=300
language=EN
technicalID.properties
SAPTechnicalSystemIdentification=TS_myTechSys.SystemHome.BS_myBizSys
In the SLD I have TS_myTechSys defined as a "SAP Standalone Java System" on myComputer.mydomain.com.
Also in the SLD, I have defined BS_myBizSys as a "Java System" and belongs to the TS_myTechSys Technical System.
In the exChange Profile under ApplicationSystem I have the following defined
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name
com.sap.aii.applicationsystem.serviceuser.pwd
com.sap.aii.proxy.framework.connection.timeoutInMSec
com.sap.aii.proxy.framework.destination
com.sap.aii.proxy.framework.destination.client
In addition I also get the following error sometimes...
JPF loadProfileProperties() - Could not access Exchange Profile: java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer '
com.sap.mw.jco.rfc.MiddlewareRFC'
no sapjcorfc in java.library.path
I have this file as a dll in the same directory as all the jar's.
in addition XILDUSER is part of the following group
SAP_BC_AI_LANDSCAPE_DB_RFC
Should that user have more permission?
Any ideas?
XI 2.0
One more note, I am running my WebApp from an instance of Tomcat 4.1. This is where the Java Proxies are running and it works fine using the jpf.properties. Some of the documentation I've recently found has said that it needs to be running on a SAP J2EE engine which we will not be able to do in the end.
Message was edited by: Larry Chaput
Message was edited by: Larry Chaput

SLD Technical System Process Integration

Hi XI Gurus,
I have a question regarding the 5th type of Technical Systems, Process Integration. Is it automatically generated once XI is restarted? In Note 764176, it's telling me to remove the PI technical systems. How can I recreate them? Will they be generated automatically or will we input them manually? Thanks!

Hi,
Ideally, you need to have 2 Technical System entries for your PI system and 6 entries for Technical System Type 'Exchange Infrastructure'.
the first category (i.e 2 systems) suppose to get deployed automatically using RZ70 (ABAP) and SLD Data Supplier (java).
And the 2nd catergory (i.e 6 entries) suppose to also get deployed automatically but in case, If you do not find them all here is the workaround to get them
1. If XI Integration Directory or XI Integration Repository not found then, Please start these tools from default tools page (http://<hostname>:<http port>/dir) upon starting these 2 components you will see them added in SLD
2. If Adapter Engine not found then, logon NWA, stop & start XPI Service: AF Core & XPI facade: Adapter Framework (Navigation - Configuration Management->Infrastructure->Java System Properties); this should help you get Adapter Engine
3. The other 3 entries, Domain, Integration Server and RWB should come and usually comes always with automatic installation.
4. If you still do see after following above instructions, i suggest delete all of them both Technical specific & Exchange Infrastracture" related entries from SLD and then re-deploy RZ70, push 'Collect and Send data' option from 'SLD Data Supplier' from NWA.
ofcourse, you can always follow the instructions provided in the note that you were refering.
Regards
Sekhar

No service user name found for Integration Server

Hi All,
Our XI is in production..once in a while (once in every 3 weeks) messages get fail saying: No service user name found for Integration Server. When we re-start J2EE engine, messages get processed fine. Does anyone know the reason for the above error?
<SAP:AdditionalText>3:No service user name found for Integration Server is.00.******<S/AP:AdditionalText>
<SAP:Stack>Error when reading the access data(URL, user, password)
Thanks
Indrasena

Hi,
did you configure your adapters like IDoc, RFC based on the SAP service user created in the SAP system ? i,e RFC destination etc..
did you check pipeline url is correct in the SLD>Business System><Integration Server> and check the url. It should have http port.
Also check this thread-
sRFC-adapter and file adapter with error: no adapter found
Regards,
moorthy

Two entries for every technical system for XI in SLD

Hi,
Last weekend we had a patch upgrade in our Production env for SAP PI system.
After that we got the Cache error (Cache notification from Integration Directory failedError when accessing the System Landscape Directory) in RWB -- "Cache Connectivity Test -> IR -> ID -> Adapter Engines".
And
In SLD->Technical Systems->all (Adapter Engine, Integration Directory, Integration Repository, RWB).
e.g.:There are two Adapter Engines:
Adapter Engine on p80.p80xxxxx
and
Adapter Engine on p80.p80xxxxx\p80
Our Basis team contacted SAP for help & SAP has suggested as below.
"We compared the SLD->Technical Systems for QA (Q80) and PROD (P80), and found that for the production box (P80), each XI component is registered Twice.
Now as per the note 764176, we have to delete the entries in the SLD -> Technical Systems. And these will be re-created after a restart.
Could you please let us know whether these have been maintained for any special reason or we can go ahead and delete them."
If you have any idea if those two should be maintained or not, please suggest how to proceed.
Thank you & Best regards,
Farooq.

Hi Farooq,
I have faced the same issue and got resolved by 764176.
you can go ahead and implement the note 764176 which will resolve your issue.
Regards,
naveen

Error While Creating Technical System for SNC

Hi There,
I am trying to create technical system for SNC in SLD, I am not able to seee SNC as a s/w component/product in the list.
when I checked the list of components in SLD, I found SNC is there under product "SCMSNC" but this product is not in the list of products.
Please help me how I can get "SCMSNC" product in the product list.
Thanks,
Nishant

Can you please explain it little bit clearly?
I think you first create product, then SWC and then try to create Technical system.
While you will create the Technical system, in the last step it will ask you for installed products.
There you can specify ur product.
Thanks,
Hetal

Technical system for idoc

i am doing a file2idoc scenario.i want to crete a technical system as web-as-abap.but we are having ecc6.0.here we are having both abap & xi .here those are having different host name.here in this scenario i am using idoc as receiver system.so will i use hostnbame of abap or xi in technical system(web-as-abap)??

Hi Michal,
Thanks for reply.
Regd Logical System, i did like this.
T-Code: SALE
Copied 'Logical System' name which is assigned for Client 800.
and While creating SLD,
Technical System: ( for Receiver IDOC)
1.Web As ABAP
2.Web AS ABAP Name (SID): FIC ( i don't know where to find SID , somebody asked me to give my R/3 System name.
Note:Other guy told me like this to find SID, T-Code:SM51
There will be name Seperated by 2 Underscores, the part next to 2nd underscore is SID. So, in my R/3 System, its like FIC_FIC_00, but when i tried to give 00 as SID, its not accepting, so i gave FIC)
Installtion Number: (i gave)
Database hostname: FIC
3. In next page Instance Number:00
4. In next page Host Name: FIC and clicked Add
5. Client: 800
Logical System: T90CLNT090 ( which is from T-Code Sale)
Business System:
1. New_BS_IDOC
2. Selected the Technical System created above.
Still cannot find in "Adapter Specific Identifiers"
<i>>>>you need to have logical system for your r3 business system (which you put in header mapping - sender service of the receiver agreement)</i>
do i need to provide, receiver Buss System for Sender Service of Receiver Agreement?
and i looked at weblog given, i am unable to find anything under T-Code IDX2, its empty..
Any Sugg?

Technical system for Oracle in SLD

Hi All,
I know the steps to create a technical system for a SAPR/3 system in SLD.
Can any one tell me the steps to create a technical system for accessing Oracle Database in SLD.
Thanks in advance,
Bhavyasri.M

Hi Shilpa,
Can u plz provide me the steps in more detail to add the Oracle system in SLD....
Thanks in advance,
Bhavyasri.M.

No destination for Integration Server found

Hi,
I've created a java Proxy, and when I want to test it I get the exception
com.sap.aii.proxy.framework.core.BaseProxyException: No destination for Integration Server found
Has anyone had a similar problem, and do how were you able to solve it?
I have included the XI jars in my project, I have the following entries in dbconnect.properties
hostname=<myXIhost>.<domain>
systemnumber=00
client=100
user=<xiappluser>
password=<xipassword>
language=EN
in technicalID.properties I have the following entries
SAPTechnicalSystemIdentification=<technicalSystem>.<namespace>.SystemHome.<servername where the proxy is running on>.<domain>

Hi,
I've created a java Proxy, and when I want to test it I get the exception
com.sap.aii.proxy.framework.core.BaseProxyException: No destination for Integration Server found
Has anyone had a similar problem, and do how were you able to solve it?
I have included the XI jars in my project, I have the following entries in dbconnect.properties
hostname=<myXIhost>.<domain>
systemnumber=00
client=100
user=<xiappluser>
password=<xipassword>
language=EN
in technicalID.properties I have the following entries
SAPTechnicalSystemIdentification=<technicalSystem>.<namespace>.SystemHome.<servername where the proxy is running on>.<domain>

E-MU 0404 PCIe Digital Audio System for Windows server

E-MU 0404 PCIe Digital Audio System for Windows server
Is it possible use E-MU 0404 PCIe under Windows Server 2008 or 2012?

Originally Posted by Mike76
E-MU 0404 PCIe Digital Audio System for Windows server
Is it possible use E-MU 0404 PCIe under Windows Server 2008 or 2012?
For windows Server 2008 and Server 2012 you may need enable Desktop Experience Feature
The Desktop Experience Feature enables a bunch of stuff that is by default present on a desktop OS. Most importantly it includes Themes, Windows Media player and the Aero related features. You will have to enable it form the Server Manager. The "Turn Windows features on or off" / "Add remove windows components" has all been rolled into the Server Manager now.
Server Manager > Features > Desktop Experience
Installing the Desktop Experience feature does not enable them. You have to manually set them up.
After that Windows Server 2008 == Vista x64
Windows Server 2008 R2 == Windows 7 x64
Windows Server 2012 == Window 8 x64
So just use the appropriate desktop drivers - that are available

Business System as Integration Server

When do we use the business system as the integration server and when do we use it as a plain rcv SAP system?...
Also how can we connect business system of dev quality and prod?

Hi Ravindra,
Actually, it makes more sense if you rephrase your question as:
"When do we wnat to use a Integration server as a Business system"..
We will use the Integration Server as the Business System when you are using the file system of the integration server as the file receiving system or, when you want to implement an ABAP proxy on the ABAP stack of the Integration Server, instead of using any other R/3 system.
Regarding your second question, there is a concept called Transport Groups in SLD.
Read this
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards,
Ravi Kanth Talagana

Creation of business and technical systems for sld

hi
can any one help me out, to creation of technical and business system for system landscape directory ....give me detailed instructions.
this is urgent requirement
regds
venky

Hi pervalli,
plz look to
http://help.sap.com/saphelp_nw04/helpdata/de/31/f0ff69551e4f259fdad799a229363e/frameset.htm
Regards,
Udo

What to in SLD (Business and Technical sys)for Java server Proxy?

I am using java server proxy for communicating with XI.
I have HTTP as sender comm channel and XI as Receiver comm channel and this is the error i got in SXMB_MONI.
What to give in SLD for java Server proxy, i have given Web as Java.....is this what the error says.Help is highly appreciated.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_Folder_MM_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Während des Anwendungs-Mappings com/sap/xi/tf/_Folder_MM_ wurde eine com.sap.aii.utilxi.misc.api.BaseRuntimeException geworfen: Fatal Error: com.sap.engine.lib.xml.parser.Parser~.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
=====================
Thanks

Hi,
Refer this configuration guide:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
Refer these too:
Java Proxy Inside Story Part I
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
Java Proxy Inside Story Part II
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
Regards
suraj
Message was edited by: S.R.Suraj
Message was edited by: S.R.Suraj

Logical System for Integration Process

I am getting a error message for my Integration Process: "Unable to convert sender service IP_Kleinschmidt_Shipments to an ALE logical system"
I am confused as to what i need to put in the IP -> Service -> Adapter Specific Identifires ->Logical System.
I won't let me enter either the R3 system nor the XI system.
What value do I need to put here so my acknoldgement can go back to the R3 system?

Use header mapping in receiver agreement to apply a business system as sender of the Idoc message.
That business system must have a logical system aplied and this should be maintained in R/3 as well.
if you use XI system as logical system as IDoc receiver in R/3, then you can apply also XI as sender here.
But you have to load the PI as business system to ID for this reason.
You cannot apply a logical system to the business system, which already used elsewhere.
I discused that issue with the developer a couple of years ago. He told me to use the workaround.

Regarding technical system for Portal

Hi all:
When Define Server for Resources for ESS on backend, it asks the technical name of Portal, can you please tell me where to
find it ?
Thank you very much .

Hi,
FQDN means fully qualified name
http://hostname :port/irj/portal ..your host name will become FQDN if it is name instead of ipaddress.
put hostname of portal as technical name.

Technical system for integration server

Similar Messages

Maybe you are looking for