Business System as Integration Server

When do we use the business system as the integration server and when do we use it as a plain rcv SAP system?...
Also how can we connect business system of dev quality and prod?

Hi Ravindra,
Actually, it makes more sense if you rephrase your question as:
"When do we wnat to use a Integration server as a Business system"..
We will use the Integration Server as the Business System when you are using the file system of the integration server as the file receiving system or, when you want to implement an ABAP proxy on the ABAP stack of the Integration Server, instead of using any other R/3 system.
Regarding your second question, there is a concept called Transport Groups in SLD.
Read this
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards,
Ravi Kanth Talagana

Similar Messages

No business system in integration directory error...urgent pl

Scenario: SAP800 to SAP812 via XI3.0 Using Idocs and IDoc adopter.
When I create a business system for SAP800 and SAP812 in integration Directory, it is not visble in the Integration server where I configured the Idoc adopter and thus the Idoc_inbound_asychronous is throwing a error back to SAP800" No service for business system SAP800 in integration Directory".
What may be the problem? And Pl help in Debugging the creation of business system in Integration Directory...
Thanks.

Hi,
make sure that the logical system names are properly assigened to the business systems in the Directory. To to so double click one of your Business Systems and select the menu entry "Adapterspecific Identifiers".
If the logical system name is not maintained here, make sure that it is so in the SLD (check the clients of your technical system in the SLD).
Maintain them, if necessary, clear the SLD Cache in the Directory (Menu: Environment->Clear SLD..), go to the Adapterspecific Identifiers (in edit mode) and click the second button to load the data from the SLD.
Did this fix the problem?
Regards,
Hans Christian

Importing new business systems into Integration Directory PI 7.1

Team SDN,
Team We have presently upgraded to PI 7.1(inline upgrade XI 3.0 was the older version). There are some changes like Import of software component version from SLD to ESR. intially we use to do in Xi 3.0 by selcting tools and import, but now we have to do different manner like going to ESR click on new and under work areas we have SCV. Do we have any new procedure fro importing business system into integration directory PI 7.1.
Please share with members if wht are the new changes in PI 7.1 work proceses like the one i mentioned above importing SCV(please don't start ESR and blah blah) any real issues wht we will encounter in termsof PI 7.1
Thanks SDN.

Hi Madhu,
If you want to create a communication component for a business system from the System Landscape Directory (SLD), choose the Business System menu option.In the wizard, select a business system from the SLD and create a communication component for it in the Integration Directory.
refer below link..
http://help.sap.com/saphelp_nwpi71/helpdata/EN/3e/60653f0c9fa075e10000000a114084/content.htm
Regards,
Raj

Business Service (vs) Business System in Integration Directory.

Hi to all,
I want to know the best practice for using Business Service and Business System, Then
When we should go for Business Service instead of Business System in Integration directory? Can any one give me suggestion for me .
Thanks,
Vikram.C.

Hi Vikram,
>>Business System: It represent a specific application System in the SLD.
Business Service: It represents an abstract service and are used in Cross Company Process.
>>When we should go for Business Service instead of Business System in Integration directory?
Its purely used in the Cross Company Process, i.e. whenever you are communicating with external system.
regards

Not able to import business system in Integration Directory

Dear all,
Currently i involved in XI system copy. As per the standard documetn i have finsihed the initial activites like EXPORT and import of abap and java files is succedded.
Now in the post instalaltion activites.
I have changed the exchange profile parameter
SLD connection.
And other post installation activites succesfully.
But I am not able to import the business system in Integration director. It throws an error by mentioning.
*Access to object list of type business system using the internalEOA service business system accessor failed *
Here we are maintaing a central SLD and hence i created the service users with specific roles.
SLDcheck is working fine and it dispalying the businees system as well.
I confirmed that the user and password are same in XI and SLD system,
But in SLD I am not able to see the domain under web as Exchagne Infrastructure alonng with the componets. I have tried to registerd the same using the note 761476 but in vain. After the changes i restarted the machin and checked the domain status in SLD technical system under exchagne Inffrastructure its not working.
Is this the problem or am i missing out somewhere?
FYI: The users are not locked.
Kindly suggest me and it will be greatful if i get immediate reply.
Thanks and regards
Vijay kumar G

Hi Vijay,
It looks like the problem is with the SLD.
Did you delete the SAP ABAP and Java technical system and business systems and recreate them in the central SLD? If this was the case, then you may not be able to import them into your integration directory anymore, as the GUID of the new technical systems and business systems are not the same with the previous one.
Why not tried to recopy the SLD again, and this time do not change the technical and business systems. If the reregistration of these systems are not avoidable, then you will have to open up the copied IR for configuration.
Regards,
Lim...

Technical system for integration server

hi all
what are the steps involved in creating a technical system for integration server?what is the role of RZ70 in creating technical system for integration server?
regards
bhasker.

Hi
Technical systems should be registered by calling transaction RZ70 in technical system. Activate the profile & excute the job.
Make sure that you have provided correct SLD Host name & Gateway (Either central or local on XI).
Once you execute this function a default background job will be scheduled which will run after every 12 Hrs.
Cheers
Rakesh

Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad

Cannot see business system in integration directory.

Hi all,
I am trying to configure a simple file to idoc scenario (from the starter pack) . I have created a third party technical system and assigned it to a business system.
I have configured the scenario as given in the exercise scenario in the integration repository.
In the Integration directory, i create a new configuration scenario . Now i go into the service without party , and try to assign a business system . However, here , in the list of business systems available from the SLD, i cannot see my business system . Could anybody help me find out why this is happening ?
p.s. while creating the technical system , i have given 'localhost' as host, since i didnt know what to give here and thats what most other technical systems in the SLD contained. could this be the problem ?
Thanks,
Joe.

Looks like the much abused points system is having a bad day on SDN
I am glad actually - will keep the spammers away
A Thank You is all that drives and should drive SDN
Regards
Bhavesh

Assign Business System in Integration Directory

Hi all,
i have basic question.
in my ID, there are some configuration scenarios.
for example, the left side look like,
in case,one of Business System created on SLD was assigned to one of configuration scenarios,
i would need to assign same business system into Business System in Service Without Party in another configuration scenarios, it was not possible to assign.
can i assign BS1 to several configuration scenarios?
or should i create Main scenario in order to define communication channel?
thanks in advance
venjamin

Hi venjamin
Yes, you can assign the same business system to different configuration scenarios.
to do this there are 2 ways.
1. Open the cofiguration scenario to which the business system has already been assigned.
Right Click on the Business System> Add to Scenario> Select the scenario to which you want to
assign your business system.
2. Select the objects tab>service without party> business system> your business system> right click-->
assign to scenario and then select your scenario.
Hope this helps,
Regards,
bhavesh
Message was edited by: Bhavesh Kantilal

SLD: recreate deleted Business System of type Integration Server

Hi,
accidentally i deletet the business system of type "Integration Server" in the SLD. And i can't recreate it. It always says:
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Any ideas to create such a business system?
The old one isn't there in the list, after i deleted it.
regards,
ms

Hi,
If you change/delete the host name of the Integration Server after the installation in either the SLD or the exchange profile, you must adjust it accordingly in the exchange profile or the SLD, respectively
Maintaining a Business System for the Integration Server
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
Regarding Integration server in Business System
Regarding Integration server in Business System
Refer editing the Business System
http://help.sap.com/saphelp_nw04/helpdata/en/59/2cb3a3c93a4c7086500b8345143418/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jul 7, 2008 2:03 PM

Configure Role of Business System " as Central Integration Server , PI

Hi Experts,
I am running transaction code IDX5 in my xi system it is showing as "system is not a central integration server unable to start the program ".In SXMB_ADM role of business system need to configured .If we need to configure how to do this .
Regards
Praveen

Hi Praveen,
For configuration of integration server please go to SXMB_ADM>In configuration choose Integration engine configuration->And add one runtime parameter IS_URL...and specify the role of business system as Integration server and specify the corresponding Integration server i.e dest://httpdestination. This destination is RFC destination that should be created in PI sytem of type 'H 'which contains the target host as host name of PI system and path prefix as '/sap/xi/engine?type=entry'.
Thanks & Regards,
Priyanka Anagani

Business System of type Integration Server In SLD .

Hi
Can anybody tell what is the criteria on which we decide whether a business system to be created in the sld should be of type Integration Server or Application System .
And also can we have only one Business system of the type integration server in the sld ?
Can anyone please explain the concept behind this.
Thanks
Nilesh.
Edited by: Nilesh Taunk on Jun 19, 2008 7:24 AM

hi,
steps to create a business system
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
If there is no business system for integration server, that means the post installation steps are not completed or someone messed with the business system for integration server.
To define a business system, follow post installation steps from install guide.
http://service.sap.com/instguides
SAP NetWeaver -> Release 04 -> Installation -> SAP XI -> Installation Guide - SAP Exchange Infrastructure 3.0 SR1 follow page 38
If you do not have integration server, that means your XI will not work.
Thanks,
Vijaya

Error while reading ID of own business system from the SLD

HI guys when trying to send Idoc from my R/3 system to SUS i am getting the following error in XI
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>DSM</SAP:P1>
<SAP:P2>900</SAP:P2>
<SAP:Stack>Error while reading ID of own business system from the SLD for system DSM and client 900</SAP:Stack>
I checked in sxmb_adm on both the ends on Xi as well as on my SUS server in Xi the role is the Integration server and on the SUS it is Application server also checked SLDAPICUST which is configured rite. Plz help me to come out of the problem.
Regards,
Anand

Hi Anand,
check the two thing's in XI.
1. First created technical system in XI to identify your XI server (Web as ABAP and Web AS Java)
2. Create the business system based on above technical system and select the role of business system is Integration server.
URL : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Create the technical system based on your SAP R/3 system.
4. Create the business system based on your SAP R/3 system.
here you need to select role of business system : Application system.
related integration server is : <XI System SID has to come>
and try to refresh the initical cache once ...
http://<hostname>:<j2ee stack port>/CPACache/refresh?mode=full
after all the things post what is the problem you are faceing.
Regards,
Venu.

Unable to create New Business System

Hi
I Installed XI 3.0 and configuring as per the configuration guide.
When I try to create Business System (SLD) I get the following error message.
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Steps:
Logon on to SLD
Click on New Business System
Name: XID and click on Next
Technical System Type: Web AS for ABAP
Select System: XID on Hostname   and select Client
Installed products: Choose all and click Nextt
Integration Server:
Business System Role: Integration Server
Pipeline url: http://HOST:PORT/sap/xi/engine/entry?action=execute
Initially I created Business System with wrong Name (P01) . I deleted it and try to recreate with new name (XID) I get the above error.
How to create a Business system and assign the role of Integration Server?
Thanks for the Help
Raghu

Hi RG,
      Once we had   same error ,due to some reason business system with role integration server deleted.
       It has been resolved by deleting XI technical system and recreating same after that it allows to define new bussiness system with role as integration server .
It might help you.
Regards
Santosh

CIM_ERR_FAILED: while importing the Business System in quality sytem

Hi Experts,
I got error while importing the SLD (Business system) from Devolopement system to quality system.
Business system is third party system.
note i created business systemaaa(third party) using the quality system integration server and assign this to as target in the dev business system in transport tab.
like i have Business system in DEV like this : BS_DEV(integration server is DEV) ( using this i was devloped the objects using this business system the like Communication channel,RD,ID,RA etc.)
i was created another business system:BS_QA(integration server is QA)
the transport tab of the BS_DEV i puted the BS_QA as target.
i used same technical systems,product,SWCV for the both Business systems
but while importing the BS_QA i got the following error:
CIM_ERR_FAILED: Instance referenced in role Antecedent of association SAP_BusinessSystemPath does not exist:
BS_DEV not imported in quality is this is cause for this problem ?
which one i need to import either BS_DEV or BS_QA to quality?
thanks in Advance

Hi,
Check if CIM content versions are same in DEV and QA.If there is any version difference you might need to update CIM content if there is any inconsistencies in CIM content there are chances to get such kind of errors.
Regatrds,
Naveen.

Business System as Integration Server

Similar Messages

Maybe you are looking for