Techniques to create template-like flash...

I noticed that alot of flash templates, like at
www.templatemonster.com, have alot of the same aesthetics/motions -
loaders, page transitions (flips etc), etc... Is there a place
where I can learn techniques used in many template sites? I can
usually tell if a site is a template site just because of how it
feels...
Example
Link
It just has that template "feel" to it.
Thanks

Hi,
Both attributes are of type String, so defining your attributes when creating the template will do. The attributes can then be referenced by components on the template using EL
Frank

Similar Messages

Is there a possibility of creating a template in flash?

Hello
I hope someone can help me. I have build a flash page which contains a complicated drop-down menu. This menu will be in 20 different pages (slideshows). If I change something in this menu (movie) I have to change it in 20 different pages (copy / paste). Is there a possibility of creating a template like in Dreamweaver. So that when I adjust the template, it will automaticaly adjust all 20 pages containing this particular template? Thank you very much for your advice. Sarosa

Thank you all for your tips. Yes all of the 20 pages will be each a different flash file with this same movie in it.
To Ross: Unfortunately I have not yet learned XML. So I don't know how to do that.
To doghouseJim: This sounds good. I think I know what you mean, but I don't exactly know how to do it. But I will try this out tomorrow and also check out your link. Thanks

Help - How do I create a template like this?

Hi there,
Can anyone tell me how to create a template website like this
where the text and images are placed into odd shapes as opposed to
boring 'awl AP DIVS.
Many thanks for any help!
Here's the website I'm talking about:
www.agaveny.com

thanks a mill but can you expand on that? how do I go about
recreating a template like that? how can you have different lengths
and widths for each rectangle? I don't get it - HELP!

How difficult would it be to create something like this?

I'm looking to create a flash widget similar to what WoW has
on their main page -
http://www.worldofwarcraft.com/index.xml
It needs to have images & text that could be called from
a php or text file, so that it can be dynamically changed. Movies
will also be integrated in the rotation as well for the Flash.
How difficult would this be for someone who's new to flash?
How long would it take and what all is needed to learn how to
re-create something like this?

The difficulty and time to do it depends on the learning
capability of the new programmer. Patience and a drive to learn is
what all is needed. Accomplishing one step at a time is probably
the best approach, whether you're new or well-versed.

Can't creat a USB Flash key to recover my BIOS

Hi, i've been struggling for a week to make my Notebook back.
From what I've read, I need to make a BIOS recovery from a USB, but I can't get to make this USB key. I'm using a Cruzer Force 32gb Sandisk Pendrive. But the Bios recovery software doesn't recognize it.
I've already tried formatting the drive with FAT32 and rename it to HP_TOOLS. My laptop's recovery partition is missing.
Does it have any limitations? I'm talking about drive size or something else.
My warranty has already expired and I'd like to solve this myself.
Thanks in advance for reading.

Hi @Facu8990 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Notebook and needing to create recovery usb drive. Here is a link to show you how.
Microsoft only allows 1 copy or USB to be created.
Do you receive an error message or number?
Here is a link to create a USB flash drive.
If all else fails then contact HP Support and Order the recovery disks. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here .
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Can I create template-based library objects in Dreamweaver CS5?

At work we need two 'streams' of template. The first are general layout templates, like the ones already available in the MX through CS5 packages (except we'd have our own customised ones). The second are more granular objects, some of which are functional.
In both cases, I don't want Jimmy to be able to wreak havoc inside anything other than the 'editable regions' which make up the templates.
Now this is fine if I stick with the first scenario (layout templates) where there's simply a big chunk of editable region for good ole Jim to sprawl into, think of this as the 'body content' area. But I really do need these granular library (or snippet) objects to work in the same way. Unfortunately with my attempts so far they don't work as I'd have thought - perhaps for good reason?
When I create a blank template and throw in my chunk of HTML (unobstrusive JS and external CSS use selectors in this HTML to provide style and function) and save it as a new library item or snippet, all looks well. Then I create a new document based on a layout template and save it as a plain html file (still all good so far). Next I drop in my custom library item... still all good... but then I go to save the document and it only allows me to save it as a new template! I expected it would just allow me to save it as HTML and have it simply respect the defined editable regions, as happens in the containing page 'body content' editable region.
Apologies if that got specific and technical quite quickly, but it is quite particular. If you want some example files lemme know and I'll zip some up.
Many thanks
p.s It is not a requirement that my library objects must somehow inject their dependency files into the newly created page - I already know what they'll be. Also, I know I must 'detatch from original' once I drop a library item into a document which then allows customisation of the library object.

Unfortunately that leads me to the same place, I suppose another way of saying my question which may clear the matter up, is: "Can I embed mutually exclusive templates inside templates?"
For those of you who like things explained conceptually in XML structures, or you're an Adobe developer and you think this isn't currently possible but is awesome, the basic premise is this:
<page template>
     <noneditable region />
     <editable region>
          Jimmy's text blah blah lorem ipsum.
          <widget template>
               <editable region>
                    Jimmy's widget customised title
               </editable region>
               <noneditable region />
               <editable region>
                    Jimmy's widget customised feedback
               </editable region>
          </widget template>
     </editable region>
     <noneditable region />
</page template>
Where '<page template />' is stored as a Template (a layout template), and '<widget template>' is stored in either the Library, or as a Snippet.
cheers,
-d

OI template error - Failed to create template

Hi,
I was under the impression that the Excel snapshot templates could be customized and tried to do this but it didn't work. I restored the master (copied it back to the template folder) but got an error message when I try to (re)set the template paths: Failed to create template (template name here).
I uninstalled OI completely and reinstalled (both server and client) but still get the above message, even when I changed the path where the templates are installed. This is only on the workstations, not on the server so I'm thinking that there is something on the workstation that is stored that doesn't get uninstalled when the add-on is uninstalled.
Even though the templates are installed in the folders indicated in the OI Company Setup, the snapshot templates are not available when in Outlook, no doubt because of this error message; there is something that isn't properly installed that links the templates to Outlook.
Any ideas how I get rid of this message? Don't see why uninstall would not fix this; sounds like a bug with the add-on.
Thank you,
Heather
Edited by: Heather Wilkinson on Mar 16, 2010 12:27 PM

Hi Heather,
Have you checked this thread yet?
Re: Outlook Integration Add-On Templates Error
Thanks,
Gordon

Ever want to create a BIOS flash/rescue disk yourself?

Well, here is the trick:
First you have to reflash your BIOS at least one time with life update. During that process you get the question where to save the new version. It should something like this: X:\Program Files\Setup Files\MS-6702 v1.70
Where X is your system disk.
Well to (re)create a bootable flash/rescue floppy you just have to run: MSISetup.exe from that directory.
Some screenshots...
Click next
next...

And the rest...
After formatting setup is copying files...
Then click cancel on the following screen
You've now made a bootable flash/rescue disk!
And it works, I tested it. MSISetup makes the floppy bootable. You don't have to tranfer the system files while formatting.
Edit: O, just remember: if a new BIOS version comes out, just replace the AMIBOOT.ROM with the new file. Mostly called something like this: a6702vms.140, so you have to rename it first.

Solman 7.1 - Created Template not able to assign and active it

Dear All,
Solman_setup - Technical Monitoring - System Monitoring, While maintain the technical monitoring -> Template Maintenance.
Created template is not display in tab Manager Object to apply and active, after that only it will be display to assign template in setup monitoring tab
Please help me
Regards

Hi,
Automatic conversion of PR in to PO using transaction code ME59N. It is not possible to convert the PR in to PO by using ME57.
This transaction code- ME57 used to assign the sources like vendor for the PR. Pre-requistic for this transaction base assignment you have already maintained Info record and source list for the material and vendor.
Pre requistic setting for the Automatic PO:
Flagged Automatic PO in SPRO->Inventory management->Goods receipt->create PO automatically
1.Automatic PO flagged at material master in purchasing view.
2.In Vendor master flagged Automatic PO in Purchasing data screen.
3.Create Info Record.
4.Maintain Source list.
5.Create PR.
6.Convert Automatic PR in to PO via t-code ME59N.
Regards,
thiru
Edited by: thiru on Dec 15, 2009 5:23 AM
Edited by: thiru on Dec 15, 2009 5:26 AM

Creating template

Hi diadem people
My goal is to create a template like that underneath. By using Diadem report VI i want to make an PDF file out of it
The values filed in the spaces in the templates will be string/number indicator generated in the main VI.
How should i go forward creating this template ??
Attachments:
testdiadem.png ‏49 KB

Hi LCT2,
I would recommend that you save all the descriptive properties and table values and curve points to a TDMS file in LabVIEW, then have DIAdem load that TDMS file and load a predefined REPORT template (TDR file). That way you can (pre-)define the TDR file easily in DIAdem by just manually loading the TDMS file, manually creating the TDR file, then saving the TDR file.
I can help with programmatically telling DIAdem to load the TDMS file and the TDR file.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How can i modifying my flash template using flash software?

like changing text pictures...in an existing template ..i do
have flash but how can i use it?

If your template requires flash to modify, then you are going
to need to learn some basic flash functions to modify it. There is
no easy or fast way to modify a flash template, other than learning
some flash itself.

How t o create breadcrumbs in flash cs 5 using action script 2.0?

how t o create breadcrumbs in flash cs 5 using action script 2.0?
If the user is going throungh some buttons then at last there is breadcrumb on last scene (like it is selected 1,2 or 3 button etc..)then final display should show last used button.
Am besically looking for breadcrumb.Can anyone know how to create breadcrumb with using movie clip?or any other code?
Can any one help me?

My problem is when i cross first,second and then third scene then on third scene if there is any crieteria like to show the value which user have used like if user have selected "a" on first scene and "b" on second scene.then on third scene if there is criteria-
first scene-
second scene-
then it should show value like-
first scene-"a"
second scene-"b"
This "a","b", have separet sound file.It should show "a","b" text and also sound should play after click on button.
Can any on help?

How can I get the standard Adobe CS4 sample templates, like the photo slideshow? Thanks

I just got Flash CS4. I think it is supposed to have several categories of templates. I only have the advertising category. How can I get the standard Adobe CS4 sample templates, like the photo slideshow? I cannot find anyplace on the Adobe.com site for template downloads.
Thanks
Mark

I have the same question-- I don't see any template categories apart from "Advertising"-- where are they?
- Jesse

Template Loses Flash Content

Hi,
as a newbie, I am probably messing things up myself. But here
is the problem.
I built a site in Flash, but was advised here last weekend
(by Murray?) that html was the way to go as far as getting my site
indexed properly. So, off I went and started building another
version of my site.
Since I already had a Flash menu in place (can be seen here
http://www.welcometoventure.com
) I wanted to retain it, and dropped the 900px by 100px swf into my
html template, using separate html links at the page bottom for
indexing.
If I make ANY change to the template, even for example
merging 2 small non editable cells at the bottom of the page, when
I open any of the several pages generated from the template, the
Flash menu has disappeared! Another flash element on the page works
just fine, but the menu disappears every single time, no matter
what I change in the template.
I am completely baffled!!! Help would be wonderful.
Thanks.
Hugh

> Thanks Murray - I am assuming that to achieve this I
would select the
> Flash
> file, click the folder to browse to the source, then
click Site Root
> within
> the dialog box? (sorry, new at this)
Yes, if you are referring to the "Link Relative to:" field.
If not, just
manually edit the code in and around the flash element to
change all
references to the name of the Flash file from "whatever.swf"
to
"/whatever.swf", or from "whatever" to "/whatever".
> On another template issue, I just set up the testing
server in OSX, and
> the
> html documents can be viewed in the browser, no problem
whatsoever, but
> the two
> template files I have created appear as code only, as
they would in Code
> view.
> Confused more and more!
If you are building only a static page site, you do not need
a testing
server. By virtue of defining one for your static pages,
what's happening
is that DW is handing the DWT file to the webserver, which
has no idea what
to do with it, and is therefore handing the text of the file
to the browser.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Hugh Anderson" <[email protected]> wrote in
message
news:[email protected]...
> Thanks Murray - I am assuming that to achieve this I
would select the
> Flash
> file, click the folder to browse to the source, then
click Site Root
> within
> the dialog box? (sorry, new at this)
>
> On another template issue, I just set up the testing
server in OSX, and
> the
> html documents can be viewed in the browser, no problem
whatsoever, but
> the two
> template files I have created appear as code only, as
they would in Code
> view.
> Confused more and more!
>
> I appreciate you taking the time on my issues.
>
> Hugh
>

I created a large Flash Pro file which includes buttons and I want to share it with others

I created a large Flash Pro file which includes buttons and I want to share it with others. It's too big for e-mail and youtube and dropbox don't support fla files. I'm new to Flash and I would appreciate a simple solution!
Thank you!

Thank you! But based on the link you gave me it seems like I should only have to do step 1 since I am not trying to embed my file into a web page. After I uploaded the SWF file to the Google Drive it still will not play. It keeps opening in Adobe Device Central and won't play anything. Should I go ahead and do step 2?
I really just want the video available to share with others. It seems like this shouldn't be very difficult.
Thanks!

Techniques to create template-like flash...

Similar Messages

Maybe you are looking for