TECO is not allowed without closing the inspection lot

Hello
I have implemented 03 & o4 inspection.
When I made TECO of Process Order system is allowed without making UD of inspection lot.
I required if the inspection lots are open of particular process order system should not allow for TECO.
Please suggest the solution.
Regards
Ashish R

Hi ,
Can you check in the Follow up action in spro whether you have defined FM QFOA_ORDER_TECHNICAL_COMPLETE and mark the After posting and Sync updating.
Check with your abaper with the below code -
CALL FUNCTION 'QFOA_ORDER_TECHNICAL_COMPLETE' "Follow-Up Action: Technically Complete PP Order with order category 40 ( AUFK-autyp= 40 )
EXPORTING
    i_qals =                    " qals
    i_qave =                    " qave
*   i_qapo =                    " qapo
IMPORTING
    e_subrc =                   " sy-subrc
TABLES
    e_protocol =                " rqevp
    . " QFOA_ORDER_TECHNICAL_COMPLETE
Otherwise , you can apply User Exit PPCO0007 in co02 or cor2
Regards
JH

Similar Messages

Result recorded values not appearing in printing the Inspection lot

Hi all ,
Using QC21 i am printing the Inspection lot but the Result recorded values are not appearing in printing the Inspection lot .
while creating the certifacte profile i had maintained the MIC for which i had saved as Summary for recording . if i change this to Orginal value it says that this doesnt exist in the Inspection plan .
can somebody help me on this .
thanks ,
ksr

Hi
1.Make sure that you are using same MIC in Task list & certificate.
2.make sure that you have done RR & taken UD.
3.make sure that MIC is reference MIC.
4.Make sure that profile is attached to material
Regards
Sujit

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

QA32: Without going in Inspection lot stock screen system should not allow for UD

Hi
At the time of UD "without going in Inspection lot stock screen system should not allow to save the UD".
Please suggest how to restrict.
Regards
Ashish

Please go through the below link & with small changes you can fulfill your requirement using user profile
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/601c82e3-b743-2c10-dbb6-ed4c00167157?QuickLink=index&…

The system is not allowing to do the Quality inspection

Followings are the details:
1) We created the PO of Stock items and in PO the same material number
is created 2 times in one line quantity is 3 and other line quantity is
2.
2) we post the GRN (Transaction code MB01 and Movement type 103) for
the above 2 materials in same GRN with complete quantity (3 and 2
Quantity).
3) system generated the Material document with 2 lines as well as the
Inspection Lot for the same materia. This lot having the Quantity of
both lines as sum up (5 quantity in one lot).
4) user has taken the action and have done the usage decision (QA11)
for 3 quantity ( the system posted the Material quantity 3 in un-
restricted stock Movement type 105) and now the user is trying to do
the usage decision (QA12) from remaining 2, but system is allowing do
do post the reamining quantity and displaying the following message:
1 EA Incorrect posting to unrestr-use stock, error msg:
PU GR blocked stock exceeded by 1 EA : 818194 QG10 RF01 M7 22
The status is showing 'Stock postings not yet completed for lot'
Appreciate your feedback.
Thanks,

Hello,
GR via mvt type 103 is to blocked stock .
You already done UD via QA11 against inspection lot. and now partial qty i.e. 2 remaining in the inspection lot.
Just post the remaining Qty.
QA12 is used to change the UD, you change the decision but can't remove it from transaction. Simply transfer the 2 qty
May i know wat is the status of inspection lot ??
Which inspction type ou activated and stockposting is manual or via QM only.?
Better please provide screen shots.
Regards

How do I selectivly close the only not responding window (without closing the other 3 responding windows)

Presently, I have 4 windows opened, each with a bunch of tabs.
Since I restarted firefox this morning, one out these 4 windows, keeps on not displaying.
How do I selectivly close this only window (without closing the 3 others windows)

Here is what the manpage shows:
[ps(1)|http://developer.apple.com/documentation/Darwin/Reference/ManPages/man1/p s.1.html]
state The state is given by a sequence of letters, for example, ``RWNA''. The first letter indicates the run
state of the process:
I Marks a process that is idle (sleeping for longer than about 20 seconds).
R Marks a runnable process.
S Marks a process that is sleeping for less than about 20 seconds.
T Marks a stopped process.
U Marks a process in uninterruptible wait.
Z Marks a dead process (a ``zombie'').
Additional characters after these, if any, indicate additional state information:
+ The process is in the foreground process group of its control terminal.
< The process has raised CPU scheduling priority.
<div class="jive-quote"> The process has specified a soft limit on memory requirements and is currently exceeding that
limit; such a process is (necessarily) not swapped.
A the process has asked for random page replacement (VA_ANOM, from vadvise(2), for example,
lisp(1) in a garbage collect).
E The process is trying to exit.
L The process has pages locked in core (for example, for raw I/O).
N The process has reduced CPU scheduling priority (see setpriority(2)).
S The process has asked for FIFO page replacement (VA_SEQL, from vadvise(2), for example, a large
image processing program using virtual memory to sequentially address voluminous data).
s The process is a session leader.
V The process is suspended during a vfork.
W The process is swapped out.
X The process is being traced or debugged.

How to open a folder inside a folder, without closing the first?

I can't find a way to open a sub-folder, inside a mainfolder, without closing the main folder.
What's even worse, if you hold "option" or "command," (old OS9 muscle memory kicking in) it opens the new folder but wipes-out the ability to use the back button! So then if you needed that main folder open, and it's deep inside some chain, you have to go searching for it again.
So, is there any fix for this?
<Edited by Host>

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply.

Customer number not in the inspection lot for a make to order scenario

Hi All,
I know that standard SAP will get the Customer number into Insp. lot only for insp. types 10/11/12. I am wondering if someone know a way to get the customer no. into insp. lot for insp. type 04 where the material is make-to-order scenario and the Production/Process order has the Sales order and customer no. without activating User-exit. The quality users want to be able to see the customer no. in insp. lot without having them to go to process order.
It makes no sense to me why the customer no. is not brought into insp. lot when that is available in the Prod/process order, which can further be used to select the customer specific insp. plans for 04 insp. type Insp. lot without using Variant configuration.
Any light on this topic is appreciated.
Thanks.

Hi Srikant,
I guess.........
Normally the inspection lot refers the triggering document that are the trigger cause for them.
- Inspection type 01: - Purchase Order and GR material document.
- Inspection type 03: - Pro. Order Number
The same way...
The inspection type 10\11\12 are purely related to the SD, and directly integrates QM and SD. Hence in the inspection lot for the inspection types directly integrated to SD, it will furnish the Sales order number \ Customer.
But the inspection type 04 is purely have it's relation to Production process. So it will have the details related to integrations it has i.e. the "Pro. Order." Hence it integrates QM-PP, it have the data related to PP (Pro Order), not the SD's one.
But I think one way you can achieve it,
Assign the Customer number also to the inspection plan along with the Material. So I think at the time of assigning the inspection plan to the inspection lot, it will refer the Customer number also and will display the Customer number along with Task list Group\Group Counter, in the inspection specification screen in QA03/02
Regards,
Shyamal

How do I close a numbers document without closing the entire app?

Can anyone tell me how I can close a numbers document without closing the entire app? i.e. go back to the folders display page - is this even possible?

It is not a bug, but a new feature.<br />
Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
You can see the difference if you use Alt+F to open the File menu or other menus like the Edit menu (Alt+E) and Bookmarks menu (Alt+B) and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=626825 bug 626825] - Hide redundant menu commands unless the user invokes the menu using the keyboard (make use of the openedWithKey attribute)
''(please do not comment in bug reports; you can vote instead)''
See also:
* [[/questions/799856#answer-155765]]

In CVI !!!! How to dynamic change BaudRate of RS232 Serial COM Without closing the Port !!!

Dear all:
I want to change the buadrate of serial com without closing the serial com, but it failed when I use the function "SetCommConfig(m_hCom, &Com_cfg, Com_cfg_S) " to reset the buadrate ,baudrate is no change when use GetCommConfig to read back the value.
Appreciated all of your advice . TKS!
Code with WINAPI as beloow:
CreateFile(..) ;
GetCommState(..);
dcb.BaudRate= 1000000 ;
SetCommState(..);
//......do other things
//change baudrate to normal without closing port .
GetCommConfig(m_hCom, &Com_cfg, &Com_cfg_S);
Com_cfg.wVersion = 0X100;
Com_cfg.dwProviderSubType = 1;
Com_cfg.dcb.BaudRate =9600 ;
Com_cfg.dcb.StopBits =1 ;
SetCommConfig(m_hCom, &Com_cfg, Com_cfg_S);
GetCommConfig(m_hCom, &Com_cfg, &Com_cfg_S);
Solved!
Go to Solution.

This topic has been discussed some years ago: see here. Please note that even if I made that sample program which changes the baud rate without closing the port, I never used it in a real situation: you'll need to made your tests and check if this solution can satisfy your needs in the short and long term.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Invoice cancellation should not allow for closed periods

Dear All,
We will be closing the posting period for each quarter,and declare the sales figure.,what ever the invoices we have made should not be cancelled in that quarter.,i want the a check in the system that if any cancellation during this quarter which is closed ,should not allow to cancel the invoice.ofcourse the accounting document will not be generated as the posting period is closed but still the invoice is generated and blocked for accounting.i want the creation of billing document should be blocked.
i Know this can be achieved By defining new routine in VOFA and assign it in VTFL., but is there any standerd routine there which will solve my purpose or i hae to go for new routine.
REgards
Shakthi

Hello Shakthi,
In standard, there is note 180756.
Unfortunately the note 180756 just helps for billing creation, it is not useful for
billing cancellation.
The note 180756 suggests to develop a copy requirement routine checking
the periods.
But in VF11 copy requirement routine are not performed.
Unfortunately there is not a ready-to-use workaround.
In transaction VOFA is possible to define a "copy requirement" routine,
which is performed when the invoice is cancelled.
You could create a routine doing the necessary check, and put
it here.
Regards,
Alex

How to create a Child Window without closing the parent Window

Hi All,
I have a requirement to create a child window without closing the parent window. I have to click an item in the parent window, then one child window should get open. The parent window should not be closed before closing the child window.
Kindly help me in this.
Thanks and Regards,
Myvizhi

Hi All,
I found the solution for this. I have created a new page. Then i created an item as link item style in the parent page and i have set the following properties in the Link item:
Destination URI : OA.jsp?page=/seagate/oracle/apps/seasoa/que/webui/SeaSoaHeaderDetailPG&headerId={@ErrHeaderId}&retainAM=Y&addBreadCrumb=Y&backPage=S
Target Frame : _blank
This is opening the new child window without closing the parent window.
Thanks and Regards,
Myvizhi

Close the last tab without closing the firefox app

greetings!
1.I would like to close the last tab without closing the app. The behaviour I expect is the app to open a new blank tab when I close the last tab. Currently I cannot close the last tab which already has some website opened in it.
2. When I open a new tab, i'm forced to enter a website address. I expect to the app to simply open a blank new tab & leave it to me whether to enter a address or not.
Thanks for your support. I love firefox for Android.

well, I would prefer to leave it to the end user whether he wants the awesome screen while pressing a new tab button/ or open a simple blank page. Let him choose it in the config.
regards,

Why does gardens of time not allow feedback in the app store

why does gardens of time not allow feedback in the app store

Apple saw it as their responsibility since the redirection took me to the App Store. They assisted me in stopping the redirection which is occurring on many peoples iPhones. It's a have java script problem that adking is using to get you to buy their games. The websites work normal and then all of the sudden the website is taken over by adking.com. You can no longer use the website as it immediately takes you to the App Store without ever showing a popup to cancel the redirection. They were very helpful fixing the problem should others experiencing this specifically with adking.com.
No need to get defensive. I'm not the only one experiencing the problem Apple said.

HT3228 When I try to send an email from my Iphone it will not send and tells me the recepient will not allow relaying. The email will sit in my outbox and then at some point will send. It sometimes takes days. What is wrong with my settings?

When I try to send an email either new, or reply on my phone I receive a notification that recepient will not allow relaying. The email will then sit in my outbox. At some point it will send but it is hardly dependable. What is wrong with my settings?

The collum to the right listed similar problems. The solution appears to be that under smtp outgoing settings the user name and password are listed as optional. I have not plugged in the information and it seems to be working. However from my office it always allowed the relaying. The true test will be when I try to respond later from the road.
Thank you for your help.

TECO is not allowed without closing the inspection lot

Similar Messages

Maybe you are looking for