Customer number not in the inspection lot for a make to order scenario

Hi All,
I know that standard SAP will get the Customer number into Insp. lot only for insp. types 10/11/12. I am wondering if someone know a way to get the customer no. into insp. lot for insp. type 04 where the material is make-to-order scenario and the Production/Process order has the Sales order and customer no. without activating User-exit. The quality users want to be able to see the customer no. in insp. lot without having them to go to process order.
It makes no sense to me why the customer no. is not brought into insp. lot when that is available in the Prod/process order, which can further be used to select the customer specific insp. plans for 04 insp. type Insp. lot without using Variant configuration.
Any light on this topic is appreciated.
Thanks.

Hi Srikant,
I guess.........
Normally the inspection lot refers the triggering document that are the trigger cause for them.
- Inspection type 01: - Purchase Order and GR material document.
- Inspection type 03: - Pro. Order Number
The same way...
The inspection type 10\11\12 are purely related to the SD, and directly integrates QM and SD. Hence in the inspection lot for the inspection types directly integrated to SD, it will furnish the Sales order number \ Customer.
But the inspection type 04 is purely have it's relation to Production process. So it will have the details related to integrations it has i.e. the "Pro. Order." Hence it integrates QM-PP, it have the data related to PP (Pro Order), not the SD's one.
But I think one way you can achieve it,
Assign the Customer number also to the inspection plan along with the Material. So I think at the time of assigning the inspection plan to the inspection lot, it will refer the Customer number also and will display the Customer number along with Task list Group\Group Counter, in the inspection specification screen in QA03/02
Regards,
Shyamal

Similar Messages

How to get the Inspection lot for a particular serial number ?

Hi all,
Can anyone help me to get the Instpection Lot number from the given serial number ?
Regards,
Shankar

Hi again,
1. goto se11, open the table ,
in display mode.
2. click button INDEXES
on application toolbar.
a new window will come
3. choose CREATE
a new window will come
4. in index name, type Y01
5. a new window will come
6. there give the field name for serial number
7. also give short description for the index.
8. save and activate
9 thats all
regards,
amit m.

Customer no to populate the Assignment field for Sales A/c using sort key

Dear All,
In 6.0, I am trying to get the Customer number to populate the Assignment field for Sales Account
We have set the sales account to a 031 sort key - sort by customer, in FS00. When 031 is set, SAP goes to the BSEG table and looks at the KUNNR (customer) field and populates the Assignment field with what is in the KUNNR field of BSEG.
The problem is: the customer number (KUNNR) does not contain any data in BSEG.
The KUNNR field of all the other account lines for the document number are blank.
Is it possible to bring the field in the General Ledger display?
Does anyone know of a user exit or other solution?
Thanks,
Gov

Hi,
Check with SD consultant and use Copy control.

Reverse GR after the Quality has passed the inspection lot

I have a situation where the GR was done, Quality has approved the materail, now we are trying to reverse the GR...the system is giving error when trying to cancel the GR...
"You cannot cancel GR, since inspection lot is already partly posted"
How can I reverse this GR,
PLease advice,
Sam

hi sameer
To be able to reverse a stock posting for an inspection lot, the following conditions must be met:
A usage decision has been made for the inspection lot.
The goods in the inspection lot have been posted from inspection stock to blocked stock or unrestricted-use stock.
If you posted the goods to a stock other than blocked stock or unrestricted-use stock (for example, to scrap), you must first post the stock back to blocked stock before you can reverse the original stock posting
Reversing Stock Postings
Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
In the field for the movement type, enter 102 (goods receipt for a purchase order into warehouse - reversal).
In the field for the purchase order, enter the purchase order number for the original goods receipt.
You can copy the purchase order number from the inspection lot.
Choose Enter to display the selection screen for the purchase order items.
Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
Save the goods receipt and exit the Materials Management component.
Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen
regards
thyagarajan

Sales order for a make to order item

HI
when i create a sales order in crm for a make to order item. its not creating any requirements.
like for a make to order item will have a BOM and routing attached to it. it creates a production order or a purchase requisition. but its not happening
a sales order is getting created in ECC. but its not creating any requirements.
so no planned order ( production order) or purchase requisition is getting created. even after running MRP.
but when i create any thing in ECC everything is working fine.

Hi,
There is a difference in the ECC sale sorder and CRM sales order in ECC sales order when you sale a product then all the parts of the product and billed and for this they create a purchace order and maitain route of the material and transpotation point all the things but in CRM we dont maintain these thing so product does have parts in it self it is one type of dummy product in showroom thata have only price so when we create a sales order in CRM then we dont maintain the BOM of that product,.
Regards,
Sid

Batch not created for the Inspection lot?

Hi Experts,
I have created a the production order by inputting the Batch in the GR tab and released the production order. The release of Production order will create a Type 03 lot , but surprisingly it doesn't show the Batch in the Batch field when i look the inspection lot that was created by release of production order, instead it shows blank. I have checked the material master and it is batch managed material. Please let me know where I'm going wrong.
Configuration- Batch is unique at material level indicator checked
my plant has Batch status management indicator
Please find the screenshot below for type 03 lot and also the Batch management indicator in material master in sales/general view, work scheduling and warehouse1.
Thanks,
Pavan

Hi Pavan,
According to SAP Note 50618, you may consider to implement the correction on that note or use partial lot assignment.
For partial lot assignment, you can find the setting in Routing header and customizing in SPRO with path: Quality Management - Quality Planning - Inspection Planning - General - Define Identifier for Inspection Points.
There's also another discussion regarding this issue. Please find here.
Regards,
Julian

Create Inspection Lot for Serial Number

Hello,
Is it possible to create an Inspection Lot and associate it to a Serial Number right away.
I've done a process were I've change the Material and Serial Number of my equipment, so now the old inspection lot is not usefull no more and I would need to have a new inspection lot so that the movement to place the stock on unrestricted is cone for the new inspection lot.
Or is that any other way to do this???
Thanks in advance.
BMO

Atul,
The inspection lot is created when the mobile is delivered from client and dismantled, and my stock gets increased for the returned material - that stock remains in Quality.
Later when the Usage Decision for the Inspection Lot is given (depending on the selection) my stock passes from quality to unrestricted, and this is the normal process without issues.
Possible exception:
If in the midle of the process I've to change the serial number for this mobile or to change the Material + serial number, the first Inspection Lot created is not helpfull to me because I can´t change there the Material or serial number. So the Usage Decision would be given for the old serial number, isn't it?
Today I found a Ztransaction that is used to create Inspection Lot. In the first step the material, goes in the warehouse in Quality and in the second step, when the Usage Decision is given, the stock passes from Quality to Unrestricted.
For the substitution Material / Serial number everything is correct, but for the first one it's not, should this obsolete stock goes to scrap?
Thanks,
BMO.

Inspection lot for production order lot and not for single pieces

Dear all,
I have a production order , for example, for 12 pieces / serial number . Material is produced in lot , in this case 3 lot of 4 pieces.
Pieces in a lot are linked toghether in a grap.
Production order create an inspection lot where I can store quality data for every pieces / serial number.
I need to store quality data at lot level ( for example the grap weight );
Is it possible ?
Regards

Can you not create Char/MIC like weight & attach the task list to the inspection lot?

The inspection lot number

Dear Gurus
We have the following situation:When i do the MIGO for GR,every time i clicked the button 'check' ,the inspection lot will skip one number.why?
best regards!
Edited by: pongpong on Oct 19, 2010 5:58 AM

Dear,
Go to OMAD or SUNM enter object QLOSE then check the number range buffer .
Header menu-- Edit>Set-up buffering>No buffer
As described in note 989067 the sequential numbering of inspection lots cannot be guarenteed.
i.e. if in the MIGO you do a check for the material movement then a number in the sequence of inspection lot numbers is lost.
Regards,
R.Brahmankar

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

Result recorded values not appearing in printing the Inspection lot

Hi all ,
Using QC21 i am printing the Inspection lot but the Result recorded values are not appearing in printing the Inspection lot .
while creating the certifacte profile i had maintained the MIC for which i had saved as Summary for recording . if i change this to Orginal value it says that this doesnt exist in the Inspection plan .
can somebody help me on this .
thanks ,
ksr

Hi
1.Make sure that you are using same MIC in Task list & certificate.
2.make sure that you have done RR & taken UD.
3.make sure that MIC is reference MIC.
4.Make sure that profile is attached to material
Regards
Sujit

In QA16 i given material doc no ,i am not getting inspection lots for UD

iam using QA16 for quality inspection .
Iam given material doc no in QA16,but iam not getting inspection lots for UD(usage decession).its comming empty screen in QA16.
iam using multiple UD at a time.

Dear check this below points.
1. Check if Material Master Auto usage decision has been checked.
2.All characteristics should be optional if not make all the char as "Optional " through control indicator This can be done for next lots only.
3.All chracteristics must be calculated and status should be 5 completed and no defect recording done.
4. Check mic indicator activated in material master and you have to do RR for this inspection lot or u can force fully complete all MICs and male IL status INSP and check again in QA16
5.Did you selected releavant UD selected set for inspection lot in QA16.
Cheers
KK

TECO is not allowed without closing the inspection lot

Hello
I have implemented 03 & o4 inspection.
When I made TECO of Process Order system is allowed without making UD of inspection lot.
I required if the inspection lots are open of particular process order system should not allow for TECO.
Please suggest the solution.
Regards
Ashish R

Hi ,
Can you check in the Follow up action in spro whether you have defined FM QFOA_ORDER_TECHNICAL_COMPLETE and mark the After posting and Sync updating.
Check with your abaper with the below code -
CALL FUNCTION 'QFOA_ORDER_TECHNICAL_COMPLETE' "Follow-Up Action: Technically Complete PP Order with order category 40 ( AUFK-autyp= 40 )
EXPORTING
    i_qals =                    " qals
    i_qave =                    " qave
*   i_qapo =                    " qapo
IMPORTING
    e_subrc =                   " sy-subrc
TABLES
    e_protocol =                " rqevp
    . " QFOA_ORDER_TECHNICAL_COMPLETE
Otherwise , you can apply User Exit PPCO0007 in co02 or cor2
Regards
JH

How to create an inspection lot for each line item of the Purchase order?

Hi,
How to create an inspection lot for each line item of the Purchase order ?
In detail if possible.

Hi
please check this
[thread|Create Inspection Lot;

Inspection Lot for Inhouse Operation Not Creating

Dear Friends,
My process is Like this, in production Order Out of ten operation eight operation are subcontracting Process.I am getting inspection Lot for this eight operation by maintaining inspection type 0130.But i am not getting inspection lot for inhouse operation by maintaining inspection type 03 also.So Please tell me what setting i have to do to get inspection Lot for inhouse operations.
Your Valuable solution is important for me...
Regards,
M.M.S

Hi Mohammed,
Check Inspection type maintained in Material master, it must be checked for "active". If it is active then system will create inspection lot as soon as you release your order.
Regards,
Shyamal

Customer number not in the inspection lot for a make to order scenario

Similar Messages

Maybe you are looking for