Tecra M2 : Error code 10 on NVIDIA GeForce FX Go5200 32M/64M

When i'm browsing on the internet my screen just suddenly cracks like a t.v with no cable signal but i can still see the mouse... when i restarted the notebook, from startup the cracks on the screen and lines etc. are still there -_- i cannot install my display driver, it's always ERROR CODE(10) - need help pls...

Sounds like a hardware issue. Especially if you see the problem *before* Windows boots.
It could be the LCD, but if you cannot install the correct Display Driver from Toshiba, that usually indicates a problem with the Graphics chip (on the mainboard)

Similar Messages

  • Nvidia GeForce FX Go5200 drivers not working with my New HD display HELP

    Are there any updates for the nvidia GeForce FX Go5200 or generic drivers so i can use my brand new, beautiful, Samsung 226bw HD Lcd??
    please help me.. i've searched the internet high and low for support, even called apple care, and i can't find help anywhere..
    please help!!
    does anyone know how to modify drivers? many pc users have been able to do it, but i don't know anything about code so please help me
    I love my powerbook and don't want to replace it, but this new display may make me do that, i need the 22"'s for designing work and don't want to go back to my 17" display.

    I'm having the same exact problem, only I've got the Samsung 225BW. I've spent all day on the phone with Samsung tech support to no avail, and could not reach anyone at Nvidia. Tried all the usual steps to adjust the resolution, but it will NOT reset, neither manually nor automatically, to the "optimum mode" of 1680x1050.
    Have you had any luck yet? I've only had my display for a few days, and it will work on 1600x1024 and below, nothing higher.
    There is no option in the menu for the 1680x1050! Making me crazy, because somehow it auto-set to the 1680x1050 when I first plugged it into my Powerbook G4, but now will not revert back to that.
    Also, I searched for the driver downloads, and the only ones I found were for Windows.

  • NVidia error code 6 When zooming and panning a high res still image

    I am consistantly getting the following error code which shuts down CS6.  This is when zooming and panning a still images measuring something like 5300 pixels wide, and 4000 pixels high.  I started by looking  at the video driver, but nVidia says it is up to date.  I am now wondering if the size of the still image is actually the problem? This is in a 1080 sequence.
    Harware is GTX570
    Any ideas?

    Bill and Dennis.
    Error Code 6 message -  new challeng in the past 48 hours on very old premiere project.
    My system - Win 7 64 byte serv pack 1, Ppro CS5.0.3, I7 processor, 12 g ram,  nvidia gtx 470.
    In the past 2 days, I am getting error code 6 from Nvidia on a logo that is keyed and 3d rolled on white background.  The logo has been used without issue for many months in this same project and was encoded correctly by Adobe 1920 x 1280.   Once this issue began,  I had to render it 1-3 frames per request of project rendering last night.  I imported the correctly encoded logo again to the project and it began to have the same issue again.  I tried to change the harsh 3d rotations to see if it would relieve the processors overall.    Nothing changed after it began to freeze up wtih the error message. 
    I saved, shut the PC down and left the system rest overnight.
    This morning the project will get past the small load screen, but will not get past pulling the first file in the project once the editing screen loads.  Prem Pro will launch correctly in all other projects this morning, but not this one.  It gives me the same error message as it did when the problem started, but I can't even begin to touch the project.   Message - "Hardware config doesn't meet min standards Error Code 6".  I close the program, but then have to enter task manager to relaunch the program since it just hangs there.
    My work around, when the project launched yesterday, was to render a much smaller amount of frames at a time which worked SLOWLY, but now I can't even access the program.  Ouch.  Backups are available from a few days ago, but I want to discover why this happened to avoid this issue for the future.  Not much confidence at this point particularly when I rendered to match rez and deleted the media cache yesterday just in case the system was having to work around more cache than needed. 
    I have my computer hardware company looking into the issue, but I didn't take any known updates on the software in the past week.  I thought this might be a thermal issue because we are having some challenges keeping our editing area cool enough, but that isn't the issue this morning because the other projects do launch correctly and the ambient temps are down.  Thanks for any suggestions.  I am a little slow to go out and see if there are any updates from Nvidia until I am out of options.  I don't want to change the system scenario before I see if there are any other options.

  • NVIDIA GeForce 650M Code 43 Error on Pavilion dv6t

    Hi all,
    I have recently been browsing in my Device Manager window and found that under display adaptors my NVIDIA GeForce GT 650M graphics adapter has a yellow flag on it. When I open the device, the device status reads:
    "Windows has stopped this device because it has reported problems. (Code 43)"
    I have tried reinstalling every possible driver for the 650M but nothing seems to work. Windows seems to be defaulting to the on-board Intel HD Graphics 4000 and I cannot disable it while enabling the 650M. I talked with HP tech support who said to go into my BIOS and disable the HD graphics BUT BUT BUT my BIOS had no settings to change the boot-up graphics device.
    Any help would be great.
    My setup includes:
    -Pavilion dv6
    -BIOS version F.13 (Insyde)

    Hi cschwab145:
    Welcome to the forum!  Thank you for your query. I am pleased to be of assistance!
    If you check the driver and software page for you computer, I believe there is a bios update for your system.  click here.    Please follow the on screen prompts, to display your software and drivers.
    You should see  bios listed on the page, click on it and check for any updates. I am also including a document on "Downloading or Updating Software and Drivers for HP Computers"   click here and  "Overview of Switchable Graphics or Dual GPUs"   click here. You could also try running the Windows troubleshooter(built in on Windows 8) MS Fix it. click here ( Wind0ws 7, Vista and XP)  Here is a link to the "HP Support Assistant",   click here which will also help to update any drivers.. If you require more assistance, would you provide the model of your computer and the operating system you are running.
    "How Do I Find My Model Number or Product Number?"  click here.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Nvidia geforce 520m error code 43

    Good evening.
    I've rebooted from Windows 7 home basic (64-bit) to windows 7 maximum(64-bit) recently and got a problem with my nvidia 520m videocard. The problem is that i can't install latest driver version of it, i got error code 43 every time i tryed to do it. So i rebooted to Windows 8.1(64-bit) and got the same problem. What's intersting, that my pc install older version of driver itself and it works, inlike the latest one.
    What can possibly be my trouble?

    Hi
    I cannot say what could cause this issue but if its happens with the graphic card then the first try should be a graphic card driver update
    I think the newest driver could be found on the Toshiba European driver page.
    Check it out!
    Bye

  • Photoshop CS6 crashes with nVidia OpenGL Error Code:3

    CS6 13.0.1.1 64 bit is crashing from time to time with the nVidia OpenGL Error Code:3.  
    It most often occurs when waking the system if it entered sleep mode while Photoshop was running but I also get it without entering sleep mode and it doesn't happen every time which makes troubleshooting a problem.   I have to go in and kill the Photoshop.exe process as it remains running and prevents relaunching the program.    Fortunately in most cases I can recover the file due to the autosave feature but that just depends on when the problem happens.
    I have installed the latest nVidia GeForce 8800 drivers without resoltuion.
    I'd been using CS6 for some time before the crashes started and have rebuilt the system since they started.   Before rebuilding the system I mainly used 32 bit but am now using 64 bit exclusively.    It may have also started after a nVidia update that was carried in Windows 7 updates.    I have changed out the graphcis card with anohter 8800 so am sure it's a software issue. 
    If anyone has run in to this, I could really use some help resolving it.  
    Thanks,
    Darvin Atkeson
    LiquidMoonlight.com

    You're several updates behind -- please go install the Photoshop updates.
    But it looks like the error might be in a driver (or something that jumps into unknown code) - so you might want to update your video card driver from the GPU maker's website. And make sure that any third party plugins you have installed are up to date.

  • PP crashing and giving NVIDIA OpenGL Error Code:6 when in FCP XML sequence

    Hi guys/gals,
    In an attempt to do an online and colour grade of a music video I shot with the EPIC recently, I loaded up a FCP XML (created with FCP version 7) file into a new 2k, 2:1, 23.98 sequence from the presets and re-linked the offline EPIC .r3D's to color in PP and AE CS5.5.
    Mix of sizes, 2k, 3k and 5k as well as some 5D shots. My playback settings are Paused: Full and Play: 1/8th
    As I go through and clean up the sequence for finishing Premiere Pro keeps crashing and giving me an error:
    NVIDIA OpenGL Driver Error Code: 6
    "Your hardware configuration does not meet minimum specs"
    When I build a new sequence from scratch with all the same footage, PP chugs along and moves slowly as I make changes and scrub through the footage but it doesn't crash.
    Is this a known issue with FCP XML's and PP and is there a fix?
    As far as I know my system is spot on and up to date on all drivers, could it be a faulty GPU??
    Specs:
    GEFORCE 285.62 DRIVER
    I am running CS5.5, with EPIC plug ins installed.
    Asus Sabretooth
    Intel i7 3600
    16GB Corsair RAM
    Nvidia GTX580
    120GB SSD C:
    2TB Raid0
    Thanks for any advice in advance.
    Cheers,
    Kevin

    "Mix of sizes, 2k, 3k and 5k"
    You would need Max GPU memory to play back that high resolution material consistent flawless.
    How much on dedicated Memory does the Nvidia GTX580 have?
    Later, I searched at new egg,  they had GTX580s with choice of  either
    1536MB or  3GB.
    You may need the 3gb model to get MPE Hardware acceleration correctly with 3k and 5k material.

  • "GPU enhancements/display driver" error with NVidia GeForce 8600 GTS

    I am currently evaluating a demo of Adobe Photoshop CS4 Extended. I am using a NVidia GeForce 8600 GTS video card. When I open the application, I get this error:
    Photoshop has encountered a problem with the display driver, and has temporarily disables GPU enhancements. Check the video card manufacturer's website for the latest software.
    GPU enhancements can be enabled in the Performance panel of Preferences.
    Here's the thing - the NVidia graphics driver I'm using is current! It's version 195.62. And here are the specifications of my video card (which is about a few years old).
    I am using Windows XP Home 32-bit SP3 with 2GB of DDR2 memory. Processor is AMD Athlon 64 X2 6000+.
    I've read over the functionality that this error message affects, and I'm not sure I understand it. If my video card is using its most current driver, what the heck am I to do? How badly will this handicap my Adobe Photoshop experience? (For reference, I plan on not doing that much using the 3D capabilities of Photoshop - but it may be interesting one day.)
    Also, one bug I'm experiencing is that the Layers window is present, but its contents don't appear unless I click on it.
    I'm not sure if I'm open to buying a new video card just to satisfy my Photoshop needs. Any help is much appreciated in overcoming this error and enabling FULLY-operational functionality of Photoshop CS4. Thanks!

    Here is a link that may help with old GPU's. Also ensure before you update the drivers that opengl is turned off otherwise PS will use the old drivers.
    http://kb2.adobe.com/cps/405/kb405064.html

  • Tecra S2 - resolution for external monitor on NVIDIA GeForce Go 6600

    Hello! I'm new here ...
    I have a Tecra S2 with Windows XP SP2 and graphic card NVIDIA GeForce Go 6600. Internal resolution (display of notebook) is 1024 x 768. Its work fine. But I work with an external monitor VGA with "DualView" function. It is a Samsung Syncmaster 940N.
    It??s all OK (19", resolution 1280 x 1024), with my new monitor Samsng Syncmaster 203B don't work: The external monitor's native resolution is 1400x1050 but the maximal resolution available is 1280 x 1024. And so, using 1280x1024 resolution, will cause the image on the external monitor and text is not clear.
    I cannot set the 1400 x 1050 resolution via Control Panel nor via NVIDIA -menu.
    Graphic card drivers are updated to the last version on the Toshiba site. Graphic card NVIDIA GeForce Go 6600 is supported from my monitor Syncmaster 203B.
    Max. resolution for external video of NVIDIA GeForce Go 6600 is higher as 1400 x 1050.
    I need to use this new monitor, can you help me?
    Many thanks in advance!

    Unfortunately the Tecra S2 isn't capable to display the resolution 1400x1050.
    Here are the resolutions you can use.
    Support Resolution/Color(CRT)
    640x480 16bit/32bit colors(Depending on CRT)
    800x600 16bit/32bit colors(Depending on CRT)
    1024x768 16bit/32bit colors(Depending on CRT)
    1280x1024 16bit/32bit colors(Depending on CRT)
    1400x1050 N/A
    1600x1200 16bit/32bit colors(Depending on CRT)
    1920x1440 16bit/32bit colors(Depending on CRT)
    2048x1536 16bit/32bit colors(Depending on CRT)
    May you find an enhanced but not official driver here: http://www.laptopvideo2go.com/enhancer

  • Tecra S2: Power Saver gives often an Error Code 0X40

    A fairly new Tecra S2 model PTS20E-01Y011DU gives often during use a fatal error in the Power Saver program with "this program will be closed" error code 0X40

    Hello
    I don't know if this will solve the problem but first step you can do is to remove power saver, restart the unit and try to install it again.

  • Globetrotter 3G in TECRA M2, conflict Error Code 10.

    Hi
    Just installed a Globetrotter 3G+ in my Tecra M2 and I got and error Code 10. Asking to the dealer seems to be related to IRQs however I have not clue about what is conflicting with the Card. I tried to disable most of the hardware but the error persist.
    I will appreciate any help on this.
    Thanks
    JAB

    Hey jabertolin,
    I am not very familiar with that 3G technology but I found this article:
    http://www.3g.co.uk/3GForum/showthread.php?t=38445
    I think its definitively not a toshiba-related issue, so check this forum and maybe you can get a solution on your problem.
    Good luck
    Cheers

  • Hardware Test: Video Ram "error code 2NVD/1/4:119" G5 2.7 NVIDIA 6800 Ultra

    Wondering if anyone has experienced this . . .
    My G5 started displaying rows of chevron shaped artifacts a few weeks after upgrading to Leopard, Bought a used replacent card and it seemed to fix the problem for a couple of weeks then too started displaying the artifacts, ran the Hardware Test on both cards and both had Video Ram error code 2NVD/1/4:2119
    I'am reluctant to buy yet another card untill I'am sure its not a Leopard Issue. any ideas?

    I need to do more troubleshooting of my problem before I trying to reflash I think . . .
    the other day I had a friend install both my original card and the newly purchased "used" card in his G5 and he also got the error codes on both of them. Brought them home installed the replacement card reset the SMU and PRAM as I've done many times before and got the G5 up and running (after several reboots) no artifacts seemed to run perfectly for a couple of hours anyway when I tried restarting and then the problems returned, gets to the grey screen with the rows of artifacts then stops, screen goes black then the fans start slowly spooling up to max RPM (most likley from a kernel panic) logs show;
    "Apparent UniNorth Hang: AGP Status"

  • Can I upgrade the graphic card Nvidia Geforce 6600 Go on Tecra M5-133

    Hi,
    I want to change Graficcard of my Toshiba M5-133 (Quadro NVS 110M), can I install Nvidia Geforce 6600 Go Graphiccard
    instead??
    Thank in advanced

    Hi
    > can I install Nvidia Geforce 6600 Go Graphiccard instead??
    No, this is definitely not possible.
    The notebook technology is different from the desktop PC and several parts are not upgradeable.
    The GPU (graphic card chip) is fixed on the board and the replacement or the upgrade is not possible, unfortunately.
    Greetings

  • Two Days of Restore Error Code 6... HELP!!!

    I have an iPod Touch that's about two years old. I no longer have access to the laptop that it is normally synced to, so I downloaded iTunes on the family computer. After hours upon hours of problems (not syncing, or showing that it successfully synced but getting a "no content" error once it turned back on) I thought maybe it was my iPod that was messing up and not the computer. I reset my iPod through holding down the home button and the power button, and I'm now at the screen that shows the USB cord with an arrow pointing towards the iTunes symbol.
    I tried to restore on iTunes, and it will get all the way through until "verifing restore," and then I will get a pop up that says the process could not be completed because of an unknown error (error 6.)
    I uninstalled iTunes and installed an earlier version of iTunes, but then my computer wouldn't even recognize my iPod. I reinstalled the latest version of iTunes and Quicktime. Still getting the same error code.
    I am on an Administrator account, running Windows Vista 64 bit, and everything is up-to-date. All anti-virus and firewalls are turned off. I've followed all of the steps outlined on the Apple site, and I am down to paying $29 for a phone call to Apple. (Ha! Over my dead body!) I don't have another computer to try it on. I've used two different iPod cords (mine and the cord from another iPod), and have tried out all of the USB ports on the computer.
    I'm really hoping someone could help me with this before I lose my mind.
    I'm fairly computer literate, but I'm not a whiz. Please don't feel the need to break things completely down into laymans terms, but please don't use pure tech-speak(:
    Diagnostics:
    Microsoft Windows Vista x64 x64 Home Premium Edition
    Service Pack 2 (Build 6002)
    HP-Pavilion NC686AA-ABA a6700y
    iTunes 10.4.1.10
    QuickTime 7.7
    FairPlay 1.12.20
    Apple Application Support 2.0.1
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.2 (333.2)
    Gracenote SDK 1.9.1.485
    Gracenote MusicID 1.9.1.102
    Gracenote Submit 1.9.1.133
    Gracenote DSP 1.9.1.43
    iTunes Serial Number 00B3B0A00BAFB508
    Current user is not an administrator.
    The current local date and time is 2011-09-28 18:09:41.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information  NVIDIA, NVIDIA GeForce 6150SE nForce 430       
    **** External Plug-ins Information ****  No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:     {154BA537-EF26-4015-BE91-6ACFA30865E5}
    Description:     USB Wireless 802.11 b/g Adaptor
    IP Address:     0.0.0.0
    Subnet Mask:     0.0.0.0
    Default Gateway:     0.0.0.0
    DHCP Enabled:     Yes
    DHCP Server:
    Lease Obtained:     Wed Dec 31 17:00:00 1969
    Lease Expires:     Wed Dec 31 17:00:00 1969
    DNS Servers:
    Adapter Name:     {3BF6C369-3C76-4358-997A-8DE3B494BFE8}
    Description:     NVIDIA nForce 10/100 Mbps
    Ethernet  IP Address:     192.168.254.3
    Subnet Mask:     255.255.255.0
    Default Gateway:     192.168.254.254
    DHCP Enabled:     Yes
    DHCP Server:     192.168.254.254
    Lease Obtained:     Wed Sep 28 17:12:00 2011
    Lease Expires:     Wed Sep 28 17:11:59 2011
    DNS Servers:     192.168.254.254
    Active Connection:     LAN
    Connection Connected:     Yes
    Online:          Yes
    Using Modem:     No
    Using LAN:     Yes
    Using Proxy:     No
    SSL 3.0 Support:     Enabled
    TLS 1.0 Support:     Enabled
    Firewall Information
    Windows Firewall is off.
    ZoneAlarm Firewall is installed.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-09-28 17:14:05.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),   E: TSSTcorp CDDVDW TS-H653Z, Rev 4403 Drive is empty.
    **** Device Connectivity Tests ****  iPodService 10.4.1.10 (x64) is currently running. iTunesHelper 10.4.1.10 is currently running. Apple Mobile Device service 3.3.0.0 is currently running.  Universal Serial Bus Controllers:  Standard OpenHCD USB Host Controller.  Device is working properly. Standard Enhanced PCI to USB Host Controller.  Device is working properly.  FireWire (IEEE 1394) Host Controllers:  VIA OHCI Compliant IEEE 1394 Host Controller.  Device is working properly.  Most Recent Devices Not Currently Connected:  iPod touch (2nd generation) running firmware version 4.2.1 Serial Number:     8K9436WJ75J  **** Device Sync Tests ****  No iPod, iPhone, or iPad found.

    This Question can be best answered by someone who had the Same error pop up, but I'll try my best.  You have an iPod touch 2nd Generation and you don't have anymore warranty for it. I hope you didn't jailbrake it or did something illegal with it like putting a new software on it that should not be on there. Here we go:
    Go to your Friends house or anybody else you know that has iTunes on their Computer. Don't sync your iPod!
    Try to restore the iPod, or try to put it as new iPod so it'll delete everything but you'll have your iPod problem fixed

  • Itune error code 4450, 4400.......a million codes!!!  HELP TOONZ....

    Dear Toonz,
    It seems you know more than the support team from itunes...they keep blaming my cd drive, when the drive works for everything else. Do I need Matchmusic? cause I gave it the boot.
    One cd burned from itunes. another says error.........then maybe i can burn............than another says error and the cd has the songs on it??? what gives, help this semi-computer iliterate.
    Here is the latest error from cd diagnostics in itunes....tried doing some of the other helpful hints u gave people............lol....Microsoft Windows 2000 Home Edition (Build 2195)
    Dell Computer Corporation Dimension 4600i
    iTunes 6.0.2.23
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce FX 5200 \GeForce FX 5200
    IDE\DiskWDCWD800BB-75FRA0_____________________77.07W77, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGDVD-ROM_SD-616E_________________F501___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSONYCD-RW__CRX216E_____________________PD01___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SAMSUNG DVD-ROM SD-616E, Rev F501
    Drive is empty.
    E: SONY CD-RW CRX216E, Rev PD01
    Audio CD in drive.
    Found 13 songs on CD, playing time 38:57 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:20:58
    Track 3, start time 05:26:44
    Track 4, start time 08:55:59
    Track 5, start time 11:25:32
    Track 6, start time 15:55:62
    Track 7, start time 17:45:48
    Track 8, start time 20:48:05
    Track 9, start time 24:41:36
    Track 10, start time 27:29:21
    Track 11, start time 30:22:45
    Track 12, start time 34:06:56
    Track 13, start time 37:39:67
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 10 12 16 24 32 40 48.
    The drive CDRW speeds are: 4.
    The last failed audio CD burn had error code -2147352480(0x80020060). It happened on drive E: SONY CD-RW CRX216E on CDR media at speed 16X.

    It is hard to credit that you haven't been able to get it fixed.
    I had a problem close to 11pm one night and phoned the technical help line and got through in two minutes and got it resolved. I must confess I have never had a problem getting through. Getting the right phone number for the right department can  be a bit hit and miss I grant you.
    Can you post your speediest results on here please?
    Sounds as though
    1. The account has not been set up
    2. You have no QofS on the line
    3. Your details aren't in the Nevoss database
    or ........
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

Maybe you are looking for