Telephone number suppliers/customers

Does anyone know the accurate field/table/view for the contact telephone number for your suppliers AND customers in EBS payabales/receiveables.
I ideally need a query to return
a) supplier name, ID, address fields, contact phone number
b) customer name, ID, address fields, contact phone number
If a could be limited down to only suppliers we have actually paid at some point - ignorning suppliers we have never paid
And similarly for b, limited down to customers who have paid us at some point - ignoring customers set up on the system who have never paid us
Any help most welcome.

For what OS and version you need the installer?
If you really need a telephone number, you can find them on http://www.adobe.com/support/contact/

Similar Messages

  • 'Up-to-date program' wont accept UK telephone number?

    Hi
    (apologies if this has been covered, i couldnt find a similiar thread)
    I am trying to request the free 'up-to-date' mountain lion update for my retina MacBook however it is asking for my telephone numbe in US format when i'm from the UK and hence not letting me progress any further... any ideas of a solution?
    Thanks
    T

    Not always - the old Mac Up to Date program required us to send for a disk from Apple and if you didn't supply all the information required or missed the cut off date you were SOL. If anything, this system is easier for most of us.

  • Telephone number for Line Rental Saver for FTTP cu...

    Hi all
    Looking for a telephone number that'd allow us to renew the Line Rental Saver package that we currently have. We have FTTP so renewal on the website is a bust and regular BT phone support does not handle FTTP customers.
    If anyone knows the number and the possible hours the line works that'd be awesome.
    Thanks
    Mr Zipf
    <TL;DR>
    BT sent an email today from [email protected] today suggesting renewal of Line Rental Saver. When trying to renew online the website says "yours is not a BT number" even though it's unchanged for years. Attempted to renew on the telephone and got through to human in a couple of minutes only to be told I needed to speak to the corresponding team in FTTP and spent 30 minutes on hold thereafter and the hold music was freaking annoying. Then called back a while later to ask for the telephone number and told I could have it if putting us through failed. After 15 minutes on hold, I hit a hard deadline that was mentioned up front. Sigh!
    </TL;DR>

    Hi MrZipf,
    Thanks for your post and welcome back!
    Sorry you're having problems renewing your line rental saver package online and for the length of time you've spent on the phone trying to get this sorted out.
    No need to worry as I can help get you sorted from here.  Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
    All the best,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • My photoshop 10 has stopped working  is there a telephone number for support that I can call to find out how to fix the problem???

    My photo shop 10 program has stopped working.  Is there a telephone number that I can call for support to find out how to fix the problem???Jenny

    Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://forums.adobe.com/docs/DOC-2325
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

  • Requested an adoption of a telephone number 4 time...

    17/12 Poor service from BT is actually costing me Money in the transfer of a telephone number from another provider  - why?
    17/12 Received a letter today with a VOL number - thankyou - but this BT business has cost me a months telephone rental with the other provider to safe gaurd the number - why is the simple task result in such a long drawn out process?

    Its more likely the other provider has not released the number.
    Why is it costing you money, as I expect you have another number at the moment?
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Requisitioner's Telephone Number Query

    We are using a custom template created using XML Publisher, to create PDF Email.
    We have HR Self Service here, so people can keep their own contact details up to date, such as work phone number.
    The work phone number is stored in the hr.per_phones table.
    If I raise a requisition as an iproc user who has a work telno on their record, and then look at the resulting XML created via the PO Output for Communication concurrent request, the XML data does not contain the phone number of the requisitioner.
    I was interested to find out if it is possible to include this information in the XML data, because it would be very useful to include the requisitioners telephone number on the
    Email PDF?
    I have logged an SR with Oracle (no update yet)... I'm guessing the answer is no, not without waiting a long time for an enhancement request, but thought I'd check here too.
    Thanks

    As far as i know PO Output for Communication report
    is a Java concurrent program and not an oracle
    report(i.e. rdf). So you have to customize the java
    concurrent program which generates xml file.
    Decompile the standard java concurrent program and
    look into it how it is pulling the data and modify it
    accordingly.Yes and No -
    PO Output for communication is a java program BUT it calls the reports 6i 'Printed Purchase Order Overview' (POXPRPOP)
    so you don't actually need to customise the java part
    only the reports 6i rdf that is called to generate the purchase order!
    Here is the description of PO Output for Communication from the Users Guide:
    PO Output for Communication
    The PO Output for Communication process creates an Adobe Portable
    Document Format (PDF) of the purchase orders you specify. The PDF
    version of purchase orders are an electronically viewable format that
    you can share with your suppliers. Oracle Purchasing provides a
    default layout which can be customized. See: Printed Purchase Order Overview: page 4 – 130.
    Cheers, iguru

  • Contact Phone Number - Suppliers

    In what table/view and in what field would be the contact telephone number for our suppliers (vendors)?

    Assuming you're on R12 then it will be AP_SUPPLIER_SITES_ALL.

  • Wrong Telephone Number Entered When Setting Up BT ...

    Hi Folks
    I feel a real idiot, but I have just realised that I have entered the wrong telephone number when asked to do so during the set up of my Home Hub 3. I have had a look on the Desktop Help and cannot find anywhere that gives me an idea how to rectify my mistake. My broadband is working fine but I don't want to leave it incorrect.
    If anyone can help me it would be very much appreciated.
    Mike
    Solved!
    Go to Solution.

    MikeyMike1 wrote:
    Hi Folks
    I feel a real idiot, but I have just realised that I have entered the wrong telephone number when asked to do so during the set up of my Home Hub 3. I have had a look on the Desktop Help and cannot find anywhere that gives me an idea how to rectify my mistake. My broadband is working fine but I don't want to leave it incorrect.
    If anyone can help me it would be very much appreciated.
    Mike
    There is nothing to set up, the home hub works without any software being installed, the stuff on the CD is not needed, and may slow your computer down.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it !

    If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it ! It wont activate. I just recentely got AT&T.  When I had verizon before and my phone got disconnected it allowed me to still iMessage off my number.

    If your phone service is disconnected, it's not your number any more.
    If you "just got AT&T", how can it be disconnected?

  • Skype account yearly telephone number charge

    Hi,
    On Dec 19, 2014 Skype charged me $30.00 for the yearly telephone number, on Dec 22, 2014 Skype charged me $30.05 stating it was for the yearly telephone number.  I had PayPal reverse the charge of $30.00 for the Skype number and received an email from Skype stating that my number will expire in Dec 30, 2014.  I go to my Skype account and it says that my telephone number has expired, so Skype what is up???  Are you trying to say that you’re yearly charge for a Skype telephone number is $60.05?  It was my understanding from Skype that a Skype yearly telephone number was $30.00 per year, yet when I ask PayPal to return one of your charges of $30.00 your email to me and my account says it will be expiring soon, so what is going on????   

     Hello and welcome to the Skype Community.
    You've been flagged for posting a duplicate message which has been removed. Please avoid in future. Due to the chargeback your account has been blocked as a precaution to protect your assets. To arrange unblocking please contact Skype customer service
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • HT5622 How do I change the Apple id against a certain telephone number?  I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

    How do I change the Apple id against a certain telephone number?  I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

    Create a new Apple ID for the second phone. If you are setting the phones up as new phone enter the ID you want to use on each phone.
    If both phones are already signed in to one Apple ID then use the settings app to change Apple IDs on one phone.
    Settings > iTunes and App Store > tap on the Apple ID > sign out > sign in with alternate Apple ID.
    Note that if you have downloaded apps with the original Apple ID on the phone with the new Apple ID, those apps will still be associated with the old Apple ID and will require the old ID and password in order to update them.

  • Incoming Telephone number field in sales order

    Dear All,
    I'm replicating Interaction Center Sales orders to an external system through IDOCs. A customer may have more than one telephone number.
    Is their a field in the sales order IDOC that contains the customer incoming call telephone number? It is a must for the external system to know this call number incase of further contact with the customer
    I gota field in the partner information "Tel1" but it always get the default telephone of the customer not the telephone in the incoming call
    Regards,
    Ahmed Elders

    Hello, Ahmed.
    Recently we've had quite similar requirement. I haven't got any standard solution for that.
    But what we've done. We store this number in the partner's address in the document (I think, in the field you've mentioned). We access this number in the following way in some view controller (actually, in IR view):
    DATA: lr_cucobupa TYPE REF TO cl_crmcmp_b_cucobupa_impl,
               lv_value TYPE string,
               lv_channel TYPE crmt_ic_channel.
         TRY.
             lr_cucobupa ?= me->get_custom_controller( if_iccmp_global_controller_con=>cucobp  ).
           CATCH cx_sy_move_cast_error.
         ENDTRY.
         IF lr_cucobupa IS BOUND.
           lv_value = lr_cucobupa->get_request_value( ) .
           IF NOT lv_value IS INITIAL.
             lv_channel = lr_cucobupa->get_channel( ). //this is actual number, id, email, whatever...
             CASE lv_channel .
               WHEN 'ANI'.
    // store the phone number in appropriate field of partner's address
               WHEN 'CHAT'.
    // store the id in appropriate field of partner's address
               WHEN 'EMAIL'.
    // store the email in appropriate field of partner's address
             ENDCASE.
    Hope this will help you.

  • Telephone number does not get truncated in BP Master Record

    Hi All,
    Our requirement is to truncate the space between telephone number and extension on BP master record on WEB UI. But we are unable to figure out how to do this. So kindly suggest what kind of configuration or development need to be done.
    Thanks in advance.
    JM.

    Hello,
    You only want to change the display for the field ?
    If so then just redefine the method GET_ for the corresponding attribute (you can get all infos by pressing F2 when cursor is in the field).
    Regards,
    Benoî

  • Identification de BP by Telephone Number (ANI)

    Hi Guys,
    I'm working with CRM 5.0 with ICI. In CRM the identification of business partner by canonical  numbers are not recognized correctly
    If telephone numbers of business partners are transferred to the SAP System in canonical form (that is in the form 12345678), the identification of the business partner fails. In the Interaction Center WebClient does not recognize canonical numbers that have a "aa bbb ccccccc" format correctly (never found the bussiness partner).
    I test directly in CIC (Interaction Center WinClient) and the manual identification of the bussiness partner fails (write the number in canonical in the field telephone, including country area).
    The number in SAP in stored in canonical format, but I saved the number of telephone and SAP add the +country code if I review directly in the system (because depend of the country). In other words, in the field telephone the number is saved like 454589 (not plus , not country code).
    Any idea?
    Regards,
    Lyda

    The SAP System, search the BP like the telephone number is saved in table ADR ...

  • Vendor Master report with address, telephone number & email ID

    Dear All,
    Kindly provide to me T Code for Vendor master report along with vendor address,Telephone number & email ID.
    Krajesh

    Hi Rajesh .... in case customer require specific information, you can also try using sap queries (trust me it is not as difficult as it sounds but the results are just great ;-):
    queries
    Table SZA1_D0100 have the following fields
    SMTP_ADDR (E-mail Address) ; TEL_NUMBER ; MOB_NUMBER ; FAX_NUMBER
    For address check table ADDR1_DATA
    Common join should be Vendor among these 2 tables
    Hope this helps !!!
    Edited by: m_n_novice on Aug 7, 2009 11:08 AM

Maybe you are looking for