Telepresence CTS-1000 optional presentation display cable type

I am installing the CTS-1000 with the optional 22'' external LCD display. The cabling guides have the picture showing that the there is an HDMI connection on the codec showing the Auxiliary Video Out, but with the NEC Display there is not a HDMI connection just a DVI.
My question is, that I am thinking that I need to purchase a DVI-Male to a HDMI-Male, is this accurate thinking? I just want to make sure I make the correct purchase.

Hi,
You should be able to get things to work with the HDMI to DVI cable. Both the formats are very similar with one small difference. i.e. HDMI can carry audio as well as video, DVI doesn't.
So you should be able to hook your projector with the CTS using the HDMI to DVI cable. As for the male/female, it depends on what connects you have on the projector. Most likely the projector has a DVI female so the cable you will need is HDMI to DVI male.
Thanks,

Similar Messages

Presenter Display Options Are Missing in Keynote 6?

I upgraded to Mavericks / Keynote 6 yesterday.
I have a dual monitor setup on my iMac27, and today when I'm trying to play a keynote presentation, it displays on the wrong monitor.
I seem to be unable to switch it to my primary monitor, because the "Presenter Display Options" tab (under preferences) that was present in the previous version is alltogether missing.
Anyone else have this issue, and a work-around?
Where are the "Presenter Display Options"?
Thanks, JB

Hi, everyone.
I, too, have encountered the same problem the first time I fired up Keynote to an external projector. After trying out all the suggestions posted here, I stumbled upon a simple remedy.
1. Ensure that the "Enable Presenter Display" checkbox is ticked under the "Slideshow" preferences tab of Keynote. I believe this is enabled by default.
2. Then right click the "Keynote" icon at the dock, and under "Options," assign to "None" or "All Desktops."
I found that this enabled Keynote to present my slides in the exact same way as the previous Keynote version did. Whether assigning it to "None" or "All Desktops" makes any difference or not, I cannot tell, but both options work. I hope this helps.

Transaction SMOEAC does not display Object type and Object Name options.

Dear all,
When I go to transaction SMOEAC system does not display fields Object type and Object Name option instead displays an empty frame allowing only to create new objects.
System does not allow and display existing objects to edit.
Most imp with the same ID, I am able to see the existing objects and two fields "Object type" and "Object Name" on different machine. So there is no authorization issue.
My SAP GUI version where these fields are not visible is 640 Final Release with 6405.5.18.1016 version and Patch level 18.
My SAP GUI version here these fields are visible is 640 Final Release with 6404.4.14.1012 version and Patch Level 14.
Any idea what could be the reason?
Regards,
Sandeep Parab

With installation of latest version of SAP GUI 710 final Release resolved my problem.
Regards,
Sandeep

Supported UCM content types by custom content presenter display template

Hi,
custom content presenter display template can only be applied to a Site Studio file? Or the UCM content item type to which the template can be applied can be of different types (says for example an UCM folios or a custom XML file)?
I would like to use the Content presenter in order to customize the presentation of a custom XML file stored on UCM...but as far as I understood I can't do it...I'm correct?
I hope I was clear.
Thanks in advance.
Best regards,
S.

In my scenario, I've a strong requirements in the user interface usability the customer should have in order to perform data entry (it generates the data that made up the XML I'll check-in in UCM): the UI should be more friendly than SS Contributor provides (for example I'll plan to implement it as an ADF page). I've also specifications on the presentation layout.
If I correctly understood, you're suggesting to store in UCM not my custom XML file, but instead a Site Studio data file containing the "same" XML content?
If yes, can I perform the SS data file check-in not using SS Contributor but instead a custom ADF based page? If yes, how can address this?
Thanks a lot.
Best regards,
S.

How can I make sure the Presenter Display will show up?

I use the option "use alternate display to view presenter information", and it works fine with my secondary display at home. The presenter information (Presenter Display) with my notes etc. shows up.
But when I gave a practice talk at my university, the Presenter Display did not show up, although all settings were the same. Back at home with my own secondary display, it works fine again.
How can I make sure that the Presenter Display will always show up on the secondary display?

I have a similar problem. Last year I gave a presention at a client's office using my Macbook. I had the presenter display on my Macbook screen and the presentation on their projector.
A few months ago I upgraded to the latest Macbook Pro 15" (plus there have been upgrades to OS X and Keynote in that time). This time when I tried to run the same set-up my MBP screen went blank. I tried changing settings for Keynote and System prefs with no success. The only way I cuould give the presentation without needing to look at the projector screen was to mirro the displays (and lose the Notes of course). Maybe there is a bug with the latest Keynote?
OS 10.5.7
Keynote 5.0.2 (776)

Can Adobe Premiere run on 2013 Mac Book Pro (thunderbolt port) and display on 2010 iMac (Mini DisplayPort) using TDM. TB cable Opt. F2 didn't work. Will a Mini Display cable work?

I need to work on Adobe Premiere on my 2013 Mac Book Pro (with thunderbolt port) and display it on my 2010 iMac (with Mini DisplayPort) using Target Display Mode (TDM). I tried using a thunderbolt cable plus Option F2, but it didn't work. Will a Mini Display cable work? Any other suggestions?
iMac specs - 21.5 inch 2010 iMac 3.06 GHz Intel Core i3 4 GB 1333 MHz DDR3
Mac Book Pro specs - 13 in. retina 2.6 GHz Intel Core i5 16GB 1600 Mhz DDR3

2010 iMacs do not have Thunderbolt, they have mini-display ports. You are using the wrong connection, you need a mini display port to mini display port. Please read up on what Apple says in Target Display Mode: Frequently Asked Questions (FAQ)

24" LCD has Super short mini-display cable that does not reach

I was setting up a 24" display (on an LCD arm) and i noticed the mini display cable is very, very short. It does not reach to the Mac Pro under the desk. I guess the 24" displays were made for laptops and did not expect that the cables would need to reach under a desk.
I couldn't find a Mini-display to Mini-display extender. Does anyone know of one?
Anyone considering two 24" monitors might want to review their own setup, to see if it works with the exceptionally short mini display video cables on the 24" display.
Message was edited by: Charles Barone

Charles, did you ever find a solution for this problem? I am ready to get a new Mac Pro and 24" display, but a 3 foot (1 meter?) cable is about two feet too short. I don't want to have the MP box sitting between my feet so it can be within 3' of the connector at the back of the display. I talked with someone at the on-line apple store today and he checked with an engineer and looked at the cable that comes with the display, and it was indeed only ~3' long. Since this type of monitor connection (the mini display port) is supposedly going to become the new "standard", I would hope that companies (e.g., Belkin, etc) will have high quality but longer cables available. I assume that the cable you have has the same mini display port plug on each end, and no adaptors are necessary?
If anyone has a solution to this short cable dilemma, please chime in!
Thanks

How do you display file type in PS Elements 10?

How do you display file type in PS Elements 10 in the Organizer for each photo?
I know you can right click and look at meta data.
In PSE 7 it was displayed under each photo.

Two things:
1. Set the View option to show file names:
2. Ensure your thumbnails are large enough to display the data:
Ken

Is there any option to display selection screen text in bold or big font?

Hi all,
Is there any option to display selection screen text in bold letters or with increase font size?
Thanks n Regards

Hi,
Just give atry in this way..
open the same program ans selection-screen screen no will be 1000 in se51 screen painter,
go to properties of the texts u want to change then go to display tab and check the checkbox bright.
it may or may not work but this will work in module pool .
just give a try...
Regards,
Suresh.

How to start Presenter Display?

Hi all
This is my first go at Keynote '09 and I love it. I want to use the Presenter Display function but I can't find it. I know how to go into "view" to customize Presenter Display options. But for the life of me I cannot figure out how to play Presenter Display on my laptop while playing the display for the audience when I press "play". Please help me see the obvious. BTW-presentation is this Friday morning!
Thanks so much!

But do you have "secondary display"?
Open System Preferences > Displays > Check at the bottom "Show displays in the menu bar".
In the menu bar near the clock you'll see LCD monitor icon. Click on it and make sure you rMac doesn't show everything in Mirror Mode. Turn it off, so that you have 2 separate screens. Now it should work.
And remember — every time you connect new projector, Mac automatically turns on Mirror Mode, which you have to turn off. Mac does remember your chosen mode for previously connected projectors.

Presenter Display Problem

I updated to Mavericks and Keynote 6 last night. This morning I find that my class presentations do not display correctly. I have an external monitor (not via AppleTV) connected (and a projector in the classroom), and when I play the presentation the presentation appears to be overlaid on top of the presenter display on my main screen. I can see the edges of the presenter display under the main presentation screen (which is on my main monitor). The seconday monitor simply displays my desktop. This appears to be a Keynote problem since the seconday display appears to be working fine with everything except Keynote. If the solution is to change one of the settings in the presenter display, I am in trouble, since I cannot get to the presenter display controls as they are covered up by the display screen when I go to presentation mode. There appears to be no other way to access the presenter display settings (why aren't they in the Preferences?). The only way that I can find to view the display on the external monitor is to set the screens to mirror, but then (of course) I loose the presenter display entirely.
Any ideas?

In another thread, macmine and mainman1303 identified an useful workaround. Here is what you need to do:
1) Make sure the new version of Keynote has an icon on the dock.
2) Control-click on the dock icon, and go to the options.
3) Change the setting from 'Desktop on Display 1' to 'All Desktops'
4) When you run your presentation the first time the presenter display may come up on the projector/external monitor. If so, press the 'x' key to swap monitors (or use the icon in the upper left corner of the presenter display. After that it should work fine.
This seems to solve the problem, but there is still a bug here that needs to get fixed. And the options (and others) should be in the preference settings, not buried in an obscure place like the dock icon.

When opening a Word document... an option box displays which I placed a check to 'Do this automatically...' but when redoing same process... option box display.

We're using EBS application that has a option to open/create download Word document. When we use Firefox v30 to open a Word document, a option box displays to inform where the document is to be open and/or save and a check box which is unmarked... which states... 'Do this automatically for files like this from now on'. I've checked the box and clicked 'OK'. I also checked Firefox options to the application and I checked and verified the Word document settings to 'default'. What happens after re-checking the process to open a Word document... the same open option box displays again... the check box is engage though. I would think that after selecting the box... this display box will not display but directly open the Word document. Please let me know if there is another setting or suggestion.
Thanks,
Wil

The server must
* Send the correct Content-Type header (e.g. ''application/msword'' MIME type).
* Not send the ''Content-Disposition: attachment'' header.
You can use the Web Console to examine the response headers for the file request in question and see if the above two conditions are met.
* https://developer.mozilla.org/docs/Tools/Web_Console
If they're not, the workarounds are the Force Content-Type and InlineDisposition add-ons, respectively. I don't know if Force Content-Type still works though.
* https://addons.mozilla.org/firefox/addon/force-content-type/
* https://addons.mozilla.org/firefox/addon/inlinedisposition/

CFSELECT with 1000 options?? Ajax??

Can anyone tell me how to handle this situation? I want to
include information about the bands in a music calendar w/o having
to re-enter the band websites or descriptions for each entry. So
the bands have their own table. The idea for data entry is to 1)
select a location 2) list dates for a month 3) have a cfselect box
with bandname associated with each date and 4) on submit loop
through and insert into database.
Unfortunately, there are like hundreds and hundreds of bands.
So putting 30 cfselect tags with 1000 options each on a page seems
ridiculous. I've thought of doing a lookup based on the band name
instead of the ID. If the name was typed incorrectly, no data, but
it would work most of the time.
What about Ajax? I know zip about Ajax, but isn't that what
is it for? Could it be done w/o spending six months learning Ajax?

Have either an A-Z series of links (followed by fine-tuning
from thee) or a
search.
I recommend you investigate how popular directories (eg:
Yahoo!) do it, and
emulate that sort of thing, unless you can come up with
anything better.
Hint: big companies spend big bucks on UI design, so they
will probably do
it better than the likes of you or I could come up with.
One concept could be - as you touch on - emulating a combo
box idea using
an input, and some sort of multiple select / div sort of
arrangement, and
having an AJAX call back to populate the multi-select thing
with
appropriate filtered data as the user types. Google does it.
There's quite possible already a CF-friendly solution out
there (maybe even
with CFFORM controls? Never use CFFORM meself).
Adam

Catalyst Uplink cable type

Hi We have a Cisco 3750 catalyst switch acting as L3 core with GLC-T= 1000BASE-T SFP modules.We have 3560 access switches with GLC-T= 1000BASE-T SFP modules.
What kind of Cat 5(or 6)cables we need to use to connect the access switch to the core using GLC-T= modules??
Usually we use cross cables to connect between switches.
Will straight cables also work???
Regds
Murali

Hello,
in addition to the other post, check if your ports support the ´mdix auto´ command, which enables the ports to automatically detect a straight or crossover cable, hence making it insignificant which one you use.
Check this info from CCO:
You can use the mdix auto interface configuration command in the CLI to enable the automatic medium-dependent interface crossover (Auto-MDIX) feature. When the Auto-MDIX feature is enabled, the switch detects the required cable type for copper Ethernet connections and configures the interfaces accordingly. Therefore, you can use either a crossover or a straight-through cable for connections to a copper 10/100, 10/100/1000, or 1000BASE-T SFP module port on the switch, regardless of the type of device on the other end of the connection.
The Auto-MDIX feature is enabled by default on switches running Cisco IOS Release 12.2(18)SE or later. For releases between Cisco IOS Release 12.1(14)EA1 and 12.2(18)SE, the Auto-MDIX feature is disabled by default. For configuration information for this feature, see the switch software configuration guide or the switch command reference.
HTH,
GP

Elitebook Folio 9480m display cable for display upgrade

Hi,
I am trying to upgrade my screen panel from HD to HD+ resolution. According to HP technical support this schould be possible by just replacing the panel. So I ordered a replacement in the higher resolution and it does not work. Backlight is on, but no picture shown. The replacement is a N140FGE-LA2. it replaces an N140BGE-LA3. Both are from Chimei Innolux.
Of course the higher resolution HD+ panel requires a 2 channel 6 bit LVDS, while the HD panel is 1 channel. So I need a cable that has all pins 40 pins connected. I also checked the display cable I have already in my machine and it seems that it is not fully connected.
With the previous model the 9470m there were two separate cables in the antenna kit for the different resulutions (part number 702876-001). The antenna kit for the 9480m does not mention this. Also HP technical support told me that the cable I have should work, but I have my doubts now.
Does anybody know where to get a suitable cable. This cable actually combines the display signals and the webcam connection. The following information would help me.
- What part number of HP would contain the spare part cable for the HD+ panel in the 9480m?
- Can I use the HD+ cable of the antenna kit from the 9470m also in the 9480m? They look very similar.
- Is there any aftermarket possibility to get to the right cable? Any part number for that would be great.
Also Interesting:
- What is the actually manufacturer and model of the panel used in the 9480m HD+ model? If somebody who has that a HD+ 9480m could have a look inside, this would be great information to double-check if the replacement panel type is actually ok.
best regards, Jörg

Hi again,
I did some investigations regarding the display cables used.
6017B0391001 is the HD cable (1 Channel, 6bit LVDS) used in the Elitebook 9470m
6017B0427401 is the HD+ cable (2 Channel, 6bit LVDS) used in the Elitebook 9470m
6017B0507401 is the diaplay cable for the Elitebook 9480m (this is the cable used in my machine)
The cable used in the 9480m looks like that not all pins are connected. Is it a 1 Channel cable? Would that mean that also the HD+ display used is a 1 Channel display? This would be strange in my opinion.
I guess I try the HD+ cable from the 9470m with the panel I odered and see if it works.
It would be really great if somebody owning an Elitebook 9480m with HD+ (1600x900) display could check what exact manufacturer and model HP uses.
Any thoughts on this would be really helpful.
best regards, Jörg

Telepresence CTS-1000 optional presentation display cable type

Similar Messages

Maybe you are looking for