Telnet to Internal Device with single Global Address

I'm managing a field office that connects to the internet through an ASA5505. This office has only a single external address (static), but I have a device on the inside of that network that needs to be accessed by a vendor via telnet.
Could anyone suggest a good way to accomplish this?
Thanks,
Chris

A shot in the dark guess (so take it with a grain of salt):
I wonder if you might be hitting a "by design" Telnet problem. I've seen a couple of references to "the firewall will not permit inbound Telnet connections on its outside interface even if the config allows it"
The Cisco Press "Cisco ASA and PIX Firewall Handbook" mentions it as do a couple of results that pop up in a Google search of: cisco pix telnet outside
Since you're Telnetting in on the outside interface and your destination address is within the firewall, perhaps it's being silently disallowed. ?Just a guess?
Is there any possibility the outside vendor (and your inside device) can use SSH to communicate? I know *that* works just fine on the outside interface when redirected into a tunnel.

Similar Messages

  • Problem with Set/Get volume of input device with single channel

    from Symadept <[email protected]>
    to Cocoa Developers <[email protected]>,
    coreaudio-api <[email protected]>
    date Thu, Dec 10, 2009 at 2:45 PM
    subject Problem with Set/Get volume of input device with single channel
    mailed-by gmail.com
    hide details 2:45 PM (2 hours ago)
    Hi,
    I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
    So is there any difference in setting/getting the volume of input channels?
    I am pasting the downloadable link to sample.
    http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
    Thanks in advance.
    Regards
    Mustafa
    Tags: MacOSX, CoreAudio, Objective C.

    That works but the the game will not be in full screen, it will have an empty strip at the bottom.
    I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
    So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
    And thanks a lot for your time kglad~I really appriciate your help.

  • CW2000 ANI Server is finding same devices with different IP addresses

    The ANI Sever is finding devices by multiple ip addresses. One devices is showing up as two devices with different ip addresses. It will show up with the loopback under its hostname and also find it by a serial ip address.

    http://www.cisco.com/warp/public/cc/pd/wr2k/cpmn/prodlit/wk2ke_wp.htm should clear up how ANI works in this case.

  • Multiple devices with one email address

    I have several devices with skype. I'd like any device to be able to call any other device, but only use a single email address. Basically, Is there any way to do this? How?

    Each user should have their own icloud account, otherwise they end up getting the same emails, contacts, calendars, notes, reminders, etc. - usually not what you want.  But if all have been sharing the same itunes ID, keep it that way, you can have different IDs for itunes and icloud.
    If you already have another icloud account, and want to set it up on a device, then go to Settings>icloud, scroll to bottom of screen and tap Delete Account.  This only disconnects the device from that account, no data is lost on icloud.  Then enter the account ID that you want to use.
    To create a new icloud account, go to
    http://www.apple.com/icloud/setup/

  • Exchange 2013: Problem with Default Global Address List after migration

    I just completed a migration from Exchange 2007 to Exchange 2013.  The 2007 box has been decommissioned just last week.  I have been seeing weird issues with our offline addressbook and global address list, since the migration, but always thought
    it was related to Ex2007.  Well the issues still exist and here's what i've found so far:
    1.  If any user goes to Schedule Appointment in Outlook, and they click the Rooms button (on the Scheduling Assistant page), we get a LONG wait (about 5 mins or more) and then an error that says:  "The operation could not be completed because
    an offline address book is not available.  Download a copy of the offline address book."  When i click OK, the address book is up, with the "All Rooms" list showing blank (we have 3 rooms in Exchange currently).
    2.  Now if I go to the Address Book in Outlook it opens to the GAL and it's up to date...  I can also force an update to the offline address book after adding a new group or entry, so i know offline address books are being updated properly and
    working.  HOWEVER, if i go to any of the other address lists (besides Contacts and GAL) under All Address Lists (All Contacts, All Groups, All Rooms, All Users and Public Folders) I get the same error given above:  "The operation could not be
    completed because an offline address book is not available.  Download a copy of the offline address book." 
    3.  I went to the Exchange 2013 EAC and went to Organization -> Address Lists.  Everything under here said 'NO' under the Up-to-Date column.  When i looked at the properties on each list, and clicked save, I had to update to the new version.
     After doing this, the Up-to-Date column said 'YES'.  I could do all lists EXCEPT for the GAL.  It still says 'NO'
    4.  The last thing i did was set my Outlook to NOT be in cached mode.  This should give me a direct connection to the GAL and all lists, if I'm not mistaken...  So when i do this, I cannot even open see the GAL.  The ONLY option in the
    Address Book that comes up is Contacts (which are my personal ones).
    5.  I just now ran Get-GlobalAddressList | fl  in powershell on the Ex2013 server.  I see some things that make me wonder...   First; nothing in the RecipientFilter field, however, there is something in the LdapRecipientFilter field.
     Second; the RecipientFilterType field says "Legacy".  and Third; the RecipientFilterApplied field says "False".
    Didn't know what these should all be, but it appears maybe this is the cause of all my issues??  Can someone help me out here.. even if i have to recreate a new GAL, i'm fine with that, I just don't know all the steps to do so.  I just need it
    to work!
    Thanks
    Jeff
    -Jeff

    Hi,
    In my opinion, it is better to confirm whether the GAL is good, first.
    How about the GAL working in OWA?
    If GAL working well in OWA, it seems the issue on the Outlook Client or Connectivity side.
    Please trying to run Outlook on the safe mode to avoid some AVs, add-ins and firewall for testing.
    Please follow the steps as below to narrow down the OAB issue.
    Following are the locations that .lzx files in CAS server and BMX server:
    CAS:
    C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB
    MBX:
    C:\Program Files\Micorosft\Exchange Server\V15\ExchangeOAB
    Please verify whether the .lzx files update to the latest.
    1. If the .lzx files in MBX server not update to the latest.
    It should be an issue on the OAB generation side.
    2. If the .lzx files in MBX server is latest, but CAS server not.
    It should be a distribution issue.
     1) Please run Get-OabVirtualDirectory command in EMS to verify whether at least one OAB VD exist in the org. If not, please create a new one.
     2) Please make sure whether any setup for Web Distribution. Selecting the “Enabling an Offline Address Book for Web Distribution” checkbox.
     3) Please force restart File Distribution services to distribute OAB files manually.
    3. If the .lzx files in MBX server and CAS server are all update to the latest.
    It should be the connectivity between CAS server and Client issue.
     1)Please verify the network.
     2)Please check DNS, MX, etc. configuration.
     3)Please run “Test E-mail AutoConfiguration” to check the AutoDiscover details.
       Please make sure the OAB URLs are correct.
       If the OAB URLs are incorrect, please using following command to re-set them:
       Set-OABVirtualDirectory -Identity "ServerFQDN\OAB (Default Web Site)" -ExternalUrl
    https://www.contoso.com/OAB -InternalUrl
    https://mail.contoso.com/OAB
     4)Please checking the App log and finding solutions from Microsoft Technet articles or KB, according to the Event ID.
     5)If it still not working after performing the methods above unfortunately, please trying to re-build OAB Virtual Directory.
       Article for reference:
       Remove, Re-Create, and Reconnect an Offline Address Book Virtual Directory
    http://technet.microsoft.com/en-us/library/bb123595(v=exchg.141).aspx 
    Hope it is helpful
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Splitting the "To" field when crawling an email and then using the "To" field as a refiner with single email addresses

    Hi
    I am using SP2013 SP1 with the September 2014 CU.
    When I crawl an email I use the "To" field subsequently as a refiner.
    Unfortunately, if the email has many email addresses in the "To" field, they all appear in the refiner which is not much help if you only want to refine by a single email address.
    IS there a way of splitting the list of email addresses in the "To" field into separate email addresses so that the field can be used as a refiner, with each refiner entry having a single email address ?
    I have seen articles for SP2010 FAST search, but not for SP2013 Search or do I need to get involved in Content Enrichment / Content Extraction for there appears to be little documentation available on these.
    I would have thought this would have been a fairly popular feature.
    Regards
    Nigel
    Nigel Price NJPEnterprises

    Hi，
    According to your description, my understanding is that the "to"search refiner has many email address when searching the "To" managed property in SharePoint 2013. but you only want to refine by a single email address.
    Whether you create custom "To" managed property,  and then you can search email address with the "To" managed property.
    The refiner value is correspond to the crawel property(column value), when you search different email adress, you would get different refiner values.
    If the issue exists, Please offer a screenshot about your issue and tell "To" managed property is mapping to which crawl property.
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • IPhoto Calendar - International Shipping with US Billing Address?

    I would like to send a calendar I'm making in iPhoto as gifts to friends around the world.  Can I make the purchases using my US based credit card?  For example I go to preferences -> advanced and change my store to Singapore (to ship to a friend in Singapore).  Would I be able to make the purchase with a credit card with a US billing address? 
    It is my understanding that if I leave the store as United States in preferences, the inputs would not allow for international addresses to be put in and that is why I'm changing the store's country. 

    With some many posts related to "shipping internationally from iPhoto" you would think Apple would chime in by now.  It really is a major failure on Apple's part that international shipping is not allowed.  Instead you force users to go to SNAPFISH or other 3rd party services - thus taking our money elsewhere.
    Its been a problem for YEARS... please fix this Apple.  You can't expect users to open a credit card account in a different country - also its almost impossible to do for most people.
    E

  • Two IOS Devices with single icloud acc, but storage remains 5gb only

    Hi
    I have iphone 4 and ipod 5th gen. For both i`m using single itunes Account.
    For icloud, i use single account for 2 devices, the storage of icloud remain 5GB only. In actual, If there is separate icloud account, for 2 ios devices
    i ll get 10GB Total , 5-5 for each ios device.
    I need to know, How can i link 2 icloud accounts & have 10Gb of storage for backup on icloud. In this way, should i be able to use Photo stream,bookmarks, notes & etc for both devices, Same as it would work if i use Single icloud account.
    As the devices are two, Why we are getting only 5Gb, which is free for only single device.

    Actually, everyone missed one point, when a device is priced, the cost of icloud storage space for that device is also included in it that is why they are able to give you 5gb each for each user ID, in nutshell there is nothing free coming with apple device purchase, it is paid for.  What they are trying by giving only 5gb per user ID irrespective of the number of devices used is pure broadlight looting, they take money from you when you buy each device and give you nothing, This is a case of goods and services bought but not fully deliverd ie apple can be suied for discreminatory treatment towards it's users. I wonder why no one tried this yet in America where everyone sue everyone for petty things..... there is no one to take up this issue? . if tim got any love for the guys who shell out money for the devices his company makes, he should be implimenting this as priority before someone wake up from sleep and sue him.

  • How to sync two devices with single Apple ID?

    I would like to use the same Apple ID for both devices. During syncing in computer ITunes, is it possible to avoid the applications in both devices share to each others?

    What syncs to any given device from a single iTunes library depend on how you have that device's profile set up in iTunes. When you connect the device to iTunes and select it under Devices, you will see a screen to the right. That screen has several tabs, including a tab for Apps. You select which apps you want on a particular device there.
    Be sure you do not have "Automatice Downloads" set up under Settings>iTunes & App Stores for the devices in question.
    Cheers,
    GB

  • I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

    I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

    Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)

  • Does lion server support a single email address across multiple devices??

    I am looking to move from an outdated Microsoft Exchange Server 2003 to OS X Lion Server but I am unsure as to how Lion will handle email. I do not want to spend money on a new windows server if I can get a Mac Mini Server to do the job. I am a very small business with a number of email accounts for a couple employees and need access to email and calendar from both the office iMac's and my Macbook Pro when on the road. My IT guy says I need Exchange but he's been off base on a few other items recently and I wanted to check with other sources.
    I have 2 new iMac's, a MacBook Pro, an iPad1 and and iPhone4 on the mac side of things and 2 windows computers running XP. I would get rid of the windows computers completely if not for my CAD program which runs best not in a virtual machine mode.
    How well will email and calendar entries sync across devices?

    I have a very similar setup at my office. Lion Server will push email, calandar, contacts to all of your apple product with out a hitch.
    As far the Windows XP machines, you can access email over IMAP with Thunderbird, and calandars via sunbird or the built in web app.
    I would ditch the exchange server move to Mac OS X Server, and never look back.
    God Luck!
    PS. All of your devices will be in sync all the time.
    Shore answer:
    Does lion server support a single email address across multiple devices??
    Yes.

  • Issues with Global Address Book and Out of Office saying Exchange is Offline.

    So we have an Exchange 2010 server that has been running fine for quite a few years. We recently changed our firewall to an ASA 5510 and created all the firewall rules necessary to have email work through it. Everything works fine so naturally we thought
    everything was good to go.
    Then I started getting messages that the Out of Office wasn't working an that when users where trying to set their away message they would get a message from outlook that the exchange server was unavailable, yet when I
    check the outlook client it would say Connected to Microsoft Exchange at the bottom. I thought this was crazy so I started looking further into it and it turns out that the name for the server owa.xxxxxx.net points to a public address, which of course lives
    on the outside interface to the ASA. In ASA world it doesn't like private space (ie. 192.168.x.x) talking to the outside interface and drops the packets, where our old firewall did not. So as a short term fix I had the users using OWA site with a internal
    address to set their out of office message. This worked fine until today when I rebooted the email server and started getting support calls saying that when users where selecting the To: button in a new email that once again they were getting messages saying
    that they were not connected to exchange, yet they once again outlook said they were. I then started playing with the host name owa.xxxxxx.net again. This time I changed the hosts file on a box and pointed the internal IP of the exchange server to that
    host name. Restarted the outlook client and things started to work as they should. I have played with split DNS to see if this would help so I wouldn't have to do this with every client in the network, and it was promising until I realized that we many hosts
    that use this domain and an external DNS server that takes care of these requests that now the internal users will never reach. Funny part is that if we take one of our laptops out side the network everything works fine as well.
    So I'm guessing that some of the processes that connect Outlook to Exchange use the FQDN of the server or IP address, and that other things such as the Global Address Book and Out of Office use the External Host Name.
    Any help to point these request at the Internal FQDN/IP would be great, or if someone can think of another way of dealing with this issue would be greatly appreciated.

    Hi Titan,
    correct me if i have missed something but are users able to look up contacts in GAL?
    If you update (ex mobile number for a user) then run the following commands(one for each line):
       Get-GlobalAddressList | update-GlobalAddressList
       Get-AddressList | update-AddressList
    Get-OfflineAddressBook | Update-OfflineAddressBook
    Restart Your Outlook  in 5 min,then do a manual OAB download.Is info on that user updated?
    Does GAL from frm OWA?
    if im not wrong,Status and Out of Office use EWS for status update.
    Please run the following command:
    Get-WebServicesVirtualDirectory -Identity “mailserver01\EWS (Default Web Site)” |fl *internalUrl*
    where mailserver01 is the server that is having the issue.
    Then please check if internal URL is correct for that server (and those that are having issues.
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

  • Unable to synchroniz​e the Address Book on the BB Device with Outlook Software 2010 Contacts

    Enviroment :
    Device Black Berry Bold 9700
    Back Berry Device Software V6
    Cause of problem :
    On the BB Device there are 2 Adress Books with the same name.
    The first one with 109 elements and the flag for wireless synchronization
    The second, which is of most importance to me since it includes my business address book, contains 1837 elements and does NOT have the flag for wireless synchronization.
    Whenever I  try to synchronize the BB Device with the PC , using Black Berry Device Software on my Windows 7 based PC and Outlook 2010 Application Software, only the first Adress Book appears active.
    I tried to solve the problem through the BB Support Forum (see link below)
    http://btsc.webapps.blackberry.com/btsc/microsites​/search.do?cmd=displayKC&docType=kc&externalId=KB1​...
    and regretfully I found out that no solution are available so far.
    This is a previously reported issue that has been escalated internally to our development team. No resolution time frame is currently available.
    The suggested Work Around doesn't work.
    Since both address books could be cleaned but not erased, it is impossible to delete the first address book and subsequently synchronize the right data .
    I tried to synchronize the BB Device with the Windows contacts but the result is the same: the synchronization works only for the first (small) Address Book.
    Another bit of info, to worsen the situation: last week the HDD (internal disk) on my PC crashed, therefore I lost all my data; as a result, the only correct Address Book  data available is inside the Black Berry device (larger list, which is the second, as stated above) , thus I absolutely need to recover all the 1837 addresses included, since they are vital for my business work.
    I need your help to solve this situation caused by an evident Black Berry Software bug.
    Thanks in advance

    I do not receive any suggestions to solve my problem.
    After 6 month the problem is very urgent, my business address book is vital for my work.
    I have only the copy on the Device Black Berry Bold 9700 and I absolutely need to have a copy of the address book on my computer.
    Do you have solved the bug.
    I need a quick answer and a final right solution
    Thanks 
    Luigi Policoro

  • I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

    I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

    Thanks - I guess it is like there were two of me!
    I bought the iPhone first and it seemed natural to link it to the (work) e-mail address which was in constant use. The iMac for home use came next and it seemed natural to use my home e-mail address, particularly as I knew by then that I would lose the work address after my imminent retirement. The same logic went for the recent puchase of the MacAir. I am not sure what happened with the iPad (also a recent purchase) - iTunes seemed to puch me towards the same ID as the iPhone.
    It is not a huge problem - just makes my persona look schizoid! Otherwise very happy with everything Apple.

  • Multiple independent devices on Single installation with independent monthly rental charges

    Hi Experts,
    4 Independent single register based devices installed (Tech+ Billing) in a single installation with same time slice. There is only monthly rental charges for each independent meter. No meter reading required and NO consumption charges. I believe we can do this scenario. Can anybody advise for any consequences?
    Note: number of devices can change from 2/3/4.

    Hi,
    How are you going to satisfy the meter read orders to make it billable without entering the meter reads? If you do not need any meter read, can't you use any flat rate / time dependent prices? The amount output will be same but you will not be using any settle* variant program. You may use any Lumsum* variant program. If you do not use the devices for entering meter read, do you have any requirement of installing the devices with the utility installation?
    Thanks.
    Nirmalya

Maybe you are looking for