Template help : CLoudy Theme 24

Application Express 4.1.1.00.23
Internet Explorer - 8
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Hi wanted some help with the Cloudy- Theme 24 I am using. By default it puts "Logout" as part of the #NAVIGATION_BAR# as default in white writting. See default template code below:
<div class="uAPEXNavBar">
<ul>
#NAVIGATION_BAR#
</ul>
</div>
I added the following code and it put the Welcome meessage above the "Logout" link and in black writting. So both end up on different lines.
<div class="uAPEXNavBar">
<ul>
#WELCOME_USER#
#NAVIGATION_BAR#
</ul>
</div>
I also tried the following and it puts the Wecome message on the same line as the "Logout" link and in white writing but puts the welcome message after the "Logout" link. But I want it before the "Logout" link
<div class="uAPEXNavBar">
<ul>
#NAVIGATION_BAR#
#WELCOME_USER#
</ul>
</div>
What I want is for it to say is the welcome message, followed by the "Logout" link all on one line in white writing.
Hope this all makes sense and hope someone can help.
Regards
Ash

Ash,
    #NAVIGATION_BAR#
//replace above line in your template with below code
   <li><span style="color:white;">#WELCOME_USER#</span></li>
   #NAVIGATION_BAR#Thanks,
Vikram

Similar Messages

  • Cloudy theme 24 Template region width not responding to style width change

    Hello
    I have a question regarding templates and themes.
    Firstly I was using theme 20 traditional blue and all was ok.
    Page template “2 level tabs with left sidebar”.
    I had a page with a tree in the left side bar region.
    Within the region definition in the attributes section against region attributes
    I included the following style="width=300px;" which increased the width of my tree so none of the text was cut off.
    All working fine!
    Then I was asked to move to the “cloudy” theme 24 which scrambled my tabs and layout but with a bit of work I sorted this out all but the tree region.
    The problem is the tree region always renders at a certain width even with the style code as before in the region attribute specifying a width nothing happen.
    Any ideas on what is happening here?
    Edited by: PolarWarrior on 02-May-2012 01:09

    I have tried using 150px 250px 350px and the width increases and then stops
    the view source shows me the following when I use 100% the ffffff id is mine input via the screen for testing
    <section class= uRegion clearfix id= ffffff style=width:100%;> (quotes removed so it display correctly).
    I have checked both templates for the page in each theme and I cannot find any references to #REGION_ATTRIBUTES# #REGION_STATIC_ID# in the templates.
    the view source of the pages is quite different in each theme

  • Flash Site Template Help With Text

    So I downloaded a flash template to use for my website... all I need are some editing of the texts, pictures, and some of those links. Here is the template:
    http://www.templatemonster.com/flash-templates/24451.html
    My problem is I'm completely NEW at flash. I used to use FrongPage 2003 for my webdesign but I wanna use this for my new website (since it looks a lot better!) How do I edit the text fields? I can only seem to move the bar along the timeline to watch the animation, and see all the layers and item properties that none have anything with the text in them. And also the images as well, if I need to do anything special with those (within template link above you'll see they flash white for a second) and the main logo has some animation there. I have all the fonts required but I don't know if I also have to make the logo with those special white flashy lines like a GIF animator or if that's just some special affect within the template itself.
    Now due to legal notices specified by the site I can't share the template with you but I'll attempt to answer any and all questions i can to see if I can get this all figured out so I can begin adding my own content to the site. Thanks in advance.

    Doesn't look like there's an xml file for the text. Reading the template help index, and its saying some text might have complex coding for special effects and that I'd have to edit by the Library or something, so I'll try using that reference for now. I appreciate the help and I may come back if this can't help me lol
    EDIT:   It says I'm missing the font file "tahoma" mapped to _sans    ....??  I have tahoma... as well as the main title logo isn't appearing in the .fla file anymore even though I got the correct font. I'm confused >.<
    Edit 2: As well I get this a lot on many different areas:
    Forms Component - Version 0.81
    Couldn't load configuration.
    Message was edited by: undreamingreality

  • Template help in cs6

    I am working in cs6 on a cd design project. It's a four panel cd design and I have each page saved as a file. The cd replication company I am using supplied a template to place each page on their template. First, when I try to copy and paste the file on the template, only the background image is there, why isn't my whole file pasting there. Second, how do you get the template lines to show up?  When I pasted, the background image covered up the template. It is sad that the company I am using will only accept certain program files, mostly adobe, yet I have had no help from them. They said they don't work in adobe. I'm using a Mac computer. I would really appreciate any help, I'm trying to finish the artwork for my husbands band new cd.  Thank you!

    What format is the template you are trying to paste into?
    In general when doin a project like this the guides and instructions onthe vendor's templates would be on a separate layer so they can be turned off. If you need to see the guides behind your image, turn off the visibility for the image temporarily in the Layers panel, or reduce it's opacity temporarily in the Effects panel.

  • How do I work out what pages templates have in them ?

    I think i do this !
    how do I work out what pages templates have in them ?

    Hi c,
    "Instinctive" (and "Intuitive", the more common term) seem to be often used where "what you're used to" would be a more accurate choice. Nothing about Page Layout is particularly instinctive if you've never done it before.
    Regarding 'greying out' some of the tools: Tools and menu items go grey when they aren't available. For example, you can't move an object to the front if you don't have an object selected (or if the selected object is the only thing in the document), or if the selected object is already further forward than anything else in the document. Anytime it is possible to use the tool/menu item in the current context, the tool/item will be active, and shown in dark type.
    You mention you are headed toward a "business plan/power point thing." The first (business plan) makes me think in terms of print, and something to be produced from a word processing template rather than page layout one. The second part say 'this will be projected on a screen' and says 'Keynote would be a better application for this task than Pages.'
    Keynote is a presentation tool, designed to produce documents that will be presented on a screen (ie. designed for the same type of documents as Powerpoint was built to produce).
    Pages has two basic document types, both aimed at producing documents that will be printed:
    Word processing—used for things like letters and reports. In general, documents that are mostly text, but that may have some illustrations, charts, or other graphics objects inserted into them.
    Page layout—used where there's a mix of graphics and text, with the text usually coming in smaller chunks.
    The biggest difference between them is that a 'blank' page layout document is really 'blank'. It can be thought of as a page sized blank canvas onto which you can place containers for text (text boxes), shapes, images, charts, or containers (placeholders) for images or other objects.
    A blank word processing document can also accept the objects and containers listed above, but also includes a text layer (where text can be entered directly, without the need to place it into a text box), and a background layer (where objects can be placed behind the text layer).
    If the above helps you choose the type of document you want to have as the end product, we can then take a look at one of the templates for that type and look at deconstructing it.
    Regards,
    Barry

  • I have accidentally deleted photos to my iPad and at same time deleted the same photos from my camera memory card. Can anyone help retrieve them to either device

    I have accidentally deleted photos imported to my iPad (model prior to Air) and at the same time I have deleted the same photos from my camera memorycard. Can anyone help retrieve them to either device As there were over 300 which cannot be replaced?

    iPad Photo Recovery: How to Recover Deleted Photos
    http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
    How to Restore Lost or Deleted Files from iPad
    http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
    How to Recover Deleted Files from iPad
    http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
    How to Recover Photos from iPad
    http://www.ipubsoft.com/idevice-tips/recover-deleted-photos-on-ipad-mini.html
    iSkysoft Free iPhone Data Recovery
    http://www.iskysoft.com/iphone-data-recovery/
    Recover iPhone/iPad/iPod touch lost data, Free.
    Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
    Recover data directly from iPhone or from iTunes backup
    Preview and recover lost iOS data with original quality
    Wondershare Dr.Fone for iOS
    http://www.wondershare.net/data-recovery/iphone-data-recovery.html?gclid=CJT7i9e 6gb4CFcvm7AodbUEAJQ
    Recover contacts, messages, photos, videos, notes, call history, calendars, voicemail, voice memos, reminders, bookmarks and other documents.
    iPad Data Recovery Software (PC & Mac)
    http://www.anysoftwaretools.com/ipad-data-recovery.html
    Jihosoft Mobile Recovery for iOS
    http://www.fonerecovery.com/iphone-data-recovery.html
     Cheers, Tom

  • I have Photoshop CC and I'd like to make an event flyer.  Are there any tutorials, templates, help???

    I have Photoshop CC and I'd like to make an event flyer.  Are there any tutorials, templates, help???

    Since your question is about Photoshop, I've moved it to the Photoshop General forum.

  • Can't import xml file: "need translation document/template" - - help please

    Hi there,
    Someone edited a project with fcp 5.1. I have fcp 5.0. I've been asked to tweak the project (for no charge, which is fine with me; it's for a tiny 3rd-world charity organization).
    He sent me the project files as xml documents... but when I double click on them I get a window saying they "need translation document file", or translation template. Nothing in my fcp folder or app seems to do the trick.
    Can someone please advise me on this?
    I did a search before posting, and noticed that someone advised someone else that xml version 2 is the better xml file to work with. I don't know whether the xml files this guy sent me are v. 1 or 2.
    Any help would be very much appreciated!
    Malcolm

    Thank you Studio X. I've just sent off the request. I'll let you know if it works.
    IF it doesn't work... should I upgrade to FCStudio2, do you think? I didn't want to have to do that (I'm not being paid for this work, so I don't really want to go out of pocket), but if this XML2 thing doesnt' work, I'm not going to be able to do this project at all, it would seem. Which I would feel badly about.
    The other thing is, I've been sort of thinking that some day I'm going to have to get FCStudio2, so maybe I should just push that day up a bit.
    It would really bother me, though, if I go to the expense of getting FCStudio2, and then I still can't open these files.
    Cheers,
    Malcolm

  • UiXML templates - help please

    I'm trying to set up a few templates and having a bit of trouble. I want to achieve the following:
    1. A common page template which contains all my <pageLayout> elements - <tabs>, <globalHeader>, <sideBar> etc.
    2. A 'browse' page template, based on the common page template, which will be a common format for the Search & Query template defined by BLAF.
    3. A maintain page template, based on the common page template, which will be a common format for the Create/Update common actions defined by BLAF.
    I have defined a template, commonPage.uit that has a DataObject attribute called 'pageResources'. this defines all the internationlised text for the page. In commonPage, the <pageLayout> title attribute will be bound to a piece of text from the pageResources DataObject. This is also the case for the browse template. The maintain template however needs to do some more complex databinding for its title attribute to achieve the 'Update <objectName>' requirement defined by BLAF so I want the maintainPage template to override the title attribute. My commonPage template is fine, it's the basing another template on it that I'm struggling with. For now I've tried this to base my maintainPage template on the commonPage template but I don't know what to do to override the title attribute of <pageLayout> - this just doesn't render the page title at all although I'm not surprised!.
    <?xml version="1.0" encoding="windows-1252"?>
    <templateDefinition xmlns="http://xmlns.oracle.com/uix/ui"
    xmlns:ui="http://xmlns.oracle.com/uix/ui"
    xmlns:data="http://xmlns.oracle.com/uix/ui"
    xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
    xmlns:temps="http://www.blueskyts.co.uk/ui/templates"
    targetNamespace="http://www.blueskyts.co.uk/ui/templates"
    localName="maintainPage">
    <templates>
    <templateImport source="commonPage.uit"/>
    </templates>
    <type base="temps:commonPage">
    <attribute name="currentObject" javaType="oracle.cabo.ui.data.DataObject"/>
    <attribute name="pageResources" javaType="oracle.cabo.ui.data.DataObject"/>
    </type>
    <content>
    <temps:commonPage>
    <boundAttribute name="title">
    <messageFormat data:format="text@(mode@currentObject@ui:rootAttr)@title@headers@pageResources@ui:rootAttr">
    <dataObject select="name" data:source="currentObject@ui:rootAttr"/>
    </messageFormat>
    </boundAttribute>
    <attributeMap>
    <rootAttributeMap />
    </attributeMap>
    <childMap>
    <rootChildMap/>
    </childMap>
    <contents>
    <rootChild name="contents" />
    </contents>
    </temps:commonPage>
    </content>
    </templateDefinition>
    I have to say the documentation is lacking as far as the functionality for basing templates on other templates is concerned. I feel that templates are very very important/powerful and crucial to the development effort so a much more comprehensive set of documentation and examples would help anyone trying to use them.
    This is my commonPage template
    <?xml version="1.0" encoding="windows-1252"?>
    <templateDefinition xmlns="http://xmlns.oracle.com/uix/ui"
    xmlns:ui="http://xmlns.oracle.com/uix/ui"
    xmlns:data="http://xmlns.oracle.com/uix/ui"
    xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
    targetNamespace="http://www.blueskyts.co.uk/ui/templates"
    localName="commonPage">
    <type base="ui:pageLayout">
    <namedChild name="pageButtons"/>
    <namedChild name="keyNotations"/>
    <attribute name="pageResources" javaType="oracle.cabo.ui.data.DataObject"/>
    <attribute name="renderLevel3Tabs" javaType="boolean"/>
    </type>
    <content>
    <dataScope>
    <provider>
    <data name="userData">
    <method class="uk.co.blueskyts.itour.ui.resource.PageResourceProvider"
    method="getUserData"/>
    </data>
    <data name="menuData">
    <method class="uk.co.blueskyts.itour.ui.resource.PageResourceProvider"
    method="getMenu"/>
    </data>
    <data name="globalResources">
    <inline>
    <globalButtons>
    <login text="Login"
    shortDesc="Login"/>
    <logout text="Logout"
    shortDesc="Logout of the system"/>
    <help text="Help"/>
    </globalButtons>
    </inline>
    </data>
    </provider>
    <contents>
    <pageLayout data:title="text@title@headers@pageResources@ui:rootAttr">
    <attributeMap>
    <rootAttributeMap/>
    </attributeMap>
    <childMap>
    <rootChildMap/>
    </childMap>
    etc...
    Any help would be much appreciated!
    Thanks
    Ian

    Hi Adam
    I've got another problem and as it's related to the template in this thread I've kept it in here. It's to do with <submitButton>s and event generation. I've got my browsePage template, based on my commonPage template which will be used to browse most types of 'object' in my application. I've defined it as per BLAF, with both search and results 'areas'. I have a <namedChild> called 'searchCriteria" which the page using the template populates. Immediately below the search criteria I have defined a <submitButton> - 'Go' - which will be used to submit the form like this:
    <type base="temps:commonPage">
    <namedChild name="searchCriteria"/>
    <namedChild name="otherColumns"/>
    </type>
    <content>
    <temps:commonPage>
    <attributeMap>
    <rootAttributeMap />
    </attributeMap>
    <childMap>
    <rootChildMap/>
    </childMap>
    <contents>
    <form name="browseObjectForm" method="post">
    <contents>
    <header data:text="text@search@headers@pageResources">
    <contents>
    <tableLayout>
    <contents>
    <rowLayout>
    <contents>
    <cellFormat>
    <contents>
    <spacer width="30"/>
    </contents>
    </cellFormat>
    <cellFormat vAlign="top">
    <contents>
    <tableLayout>
    <contents>
    <rowLayout>
    <contents>
    <spacer height="5"/>
    </contents>
    </rowLayout>
    <rowLayout>
    <contents>
    <rootChild name="searchCriteria"/>
    </contents>
    </rowLayout>
    <rowLayout>
    <contents>
    <spacer height="5"/>
    </contents>
    </rowLayout>
    <rowLayout>
    <contents>
    <submitButton ctrl:event="searchObjectType"
    data:textAndAccessKey="text@go@buttons@pageResources"
    data:shortDesc="shortDesc@go@buttons@pageResources"/>
    </contents>
    </rowLayout>
    </contents>
    </tableLayout>
    </contents>
    </cellFormat>
    </contents>
    </rowLayout>
    </contents>
    </tableLayout>
    </contents>
    </header>
    <header data:text="text@results@headers@pageResources">
    <contents>
    <tableLayout width="100%">
    <contents>
    <rowLayout hAlign="right">
    <contents>
    <submitButton ctrl:event="createObjectType"
    data:textAndAccessKey="text@create@buttons@pageResources"
    data:shortDesc="shortDesc@create@buttons@pageResources"/>
    </contents>
    </rowLayout>
    etc...
    I also have a table which will be used to display the search results, with buttons for Update, Delete etc.
    My problem is I can't get any of my buttons to generate events. I've defined my event handlers in the page using the template (as you can't have event handlers in templates) but the events don't fire. All my buttons are defined the same with ctrl:event='event name'. Regardless of the object type I want to generate standard events - searchObjectType, updateObjectType etc.. - and my event handling code will do the translation and call the right services to get the results. I've tried various things such as using the id/source attributes, passing the button in as a namedChild, using the name="event" value="searchObjectType" syntax for the <submitButton> but none of this works.
    I'm obviously missing something but can't see what.
    Thanks
    Ian

  • Can't Find Content Page or Page Links in Template - HELP!!

    I have a template that I'm working with. I was able to recreate the home page to my liking. But I can't get to the content pages to change them. The template came with 1 fla file, 1 swf file, 1 html file no additional content pages, like some others come with. From the home screen the links for the other pages work and go into pages that say content page 1, 2, and so on. Where are these pages??? How do I get to them to edit them. All I want to do is add a paragraph of words to the right side of each page. Everything else stays the same as the home page. Please Help!!

    What code is used for one of the links that gets you to one of the content pages?

  • Updating from Template help needed

    When I make a change to my template them update the dependent
    pages I get the message "Unbalanced InstanceBegin Tag". I can see
    in the dependent pages where there is two InstanceBegining and
    remove it, but as soon as I update the template the double Instance
    is writen and the page isn't update. Help......Make it stop
    Thanks for any Help !!!
    JG

    You can't use Flash's native format called .FLA to be loaded
    on web server.
    You need to export your work in Flash document to what is
    called ".SWF" format, where you need to upload THAT .SWF file to
    web server.
    To work with Flash's native files, you need to have Flash app
    installed on your machine. If you want to learn more about how to
    work with Flash, you need to keep that topic related to Flash forum
    - where you would get some better help in that forum for that
    matter.
    Good luck!

  • Making custom templates and packaging them.

    I have done several DVD's for clients/parents of thier childs soccer team videos. I normally make a custom menu for them. My question is, if i wanted to make this template and save it to give to someone else to use is there a way to do it. I guess it would be like making one to sell, but i am not selling it:) If anyone knows of a tutorial or anything that can help me i would appreciate it greatly. I am thinking about making generic templates fo several sports.

    Hi Zack,
    My guess would be if you do these in Photoshop, Live Type or Motion (as I do) give them these plus all associated files. If you have save these in DVD SP they are in Library>application Support>DVD SP>Templates. Hope this helps.
    Jeff
    Dual G4 1 GIG, G4 1.25 Laptop Macbook Pro 2.0   Mac OS X (10.4.7)  

  • Cannot get all pages to update after revising template, HELP!

    This problem is driving me crazy.  I've gone  through the 7 steps recommended elsewhere (looking for mistakes I might  have made, such as renaming the template folder), and these issues are  not my problem.
    When I create a change on the template  which needs to translate throughout the site (such as adding another tab  to the spry menubar), the change does not translate to the site.  I do  get the dialogue asking me if DW should update all of the pages, but it  these changes do not show up on the web unless I go through and upload  each page one by one to the site.  Surely there's got to be a better  way.
    HELP!

    Would you consider addressing your comment about "nested templates" in greater detail?  I'd like to know why people would use them, and why you would not?  Thanks!
    I can only assume why people use them - I'm guessing it's for one of the following reasons:
    1.  They just discovered that DW can do that, and because it's cool, they use them.
    2.  They had someone else advise them to use them, and don't have the experience to anticipate potential problems.
    3.  They have purchased a template/extension that uses them and never thought about ripping them out.
    I do not recommend their use because they can behave in non-intuitive ways, particularly when using them with other template features, like Optional regions, or editable attributes.  Having looked into nested templates deeply, I can honestly say that on balance, I do not see them adding any convenience to your life.  In fact, I see that they add complexity.  I'll be happy to pursue this notion further with you if you'd like.
    For me, the reasons one MIGHT think about using nested templates (assuming that they have enough experience to think about the alternatives with some real-world background) would be:
    1.  They want to use various sections that are based around the site layout but that has section-specific differences
    2.  They want to do some exotic tricks with navigation that, at first blush, nested templates might offer an interesting leverage
    I don't see that either of those needs would require anything other than some clever use of CSS.  This is MUCH easier to accommodate than nested templates, especially considering the over-riding downside of templates from the get-go (the need to upload all changed local files).
    I hope that helps some....

  • XML Publisher --Data Template-Help

    Hi
    we are using XML Publisher attached to R12 , we are using data template ( .XML file) in data definition .
    we have a requirement for master details report. for that we have parent query and child query .the data coming to parent query should be the parameter to child query
    Exp-- Parent Query-- select empno from emp
    Child Query --select  * from dept where empno=:p_empno (p_empno =empno from Parent query ) 
    For this requirement we are creating a data template (.XML file) . we are successfully to write for the parent query, but we fails when come to child query. Please help us how it can be wrote in data template . You can send any example related to this issue.

    This forum is noway related to XML Publisher. I had redirected you to the actual BI Publisher already once. You should post it there.

  • How to create matrix template help pls

    hi frs,
    i have generated xml file after creating matrix report in report builder.
    i want to know how to create matrix template(rtf) in word document.
    if i use wizard or insert> all fields i am not getting rtf like matrix.
    help pls
    Thanks
    Rajesh

    This issue is really becoming a problem for us. Does anyone have any examples of label templates. The label when generated automatically converts from pontrait to landscape. If you increase the size of the template then word complains about the page and margin size before printing.
    Anyone have any ideas?
    Thanks

Maybe you are looking for

  • Mobile IconItemRenderer broken for iconFields?

    I have a mobile application needing IconItemRenderer to list a bunch of lines, each with their own icon (depending on some item state), which is exactly what IconItemRenderer is designed for. 1) in the itemRenderer, i can define a right-hand decorato

  • How can I solve this publishing error in iWeb?

    Suddenly, when I try to publish in iWeb, I get the following error message: Publish error: Can't create the file "site/home.html." The disk may be damaged or full, or you must not have sufficient access privileges Well, I have a Mac Pro tower, loaded

  • How does your iPad's volume compare to your Mac's?

    We've been wondering if our iPad's volume is too low (a speaker problem? a software glitch?). Without a decibel meter, I figured the easiest test would be to compare our MacBook Pro's sound levels to our iPad's highest volume setting. We loaded up th

  • Why my apple id can ONLY using in China?

    I am traveling in Japan and bought an APP STORE CARD inorder to charge my ID, but when I doing this in itunes, system refused my requirement and told me that I cannot use this card since I am a CHINESE USER.  when i buying this card,  I asked the sho

  • BO4 - backup .unx locally - best practice?

    Hi, In addition to our standard cms + filestore backups, we wish to backup the new .unx files locally as we do with our .unv files. What is the best way to do this? Understand a .unx composed of the data foundation and business layer and these togeth