Template installer issues
Hi Guru:
When I run the template installer in the portal, I got the following errors in the step 1, "create RFC destination in ABAP"
Element 'SAPConfigLib.PT1.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.PT1.Unclassified.createRfcDestination':Error during executing Java Reflection:JCO.Client not connected in repository call
How to deal with it?
Thank you.
Best regards,
Eric
Hi Eric,
I had a similar error with the template installer. Oss note 917950 is definitely the place to start. Make sure you have sso defined on abap system by maintaining profile parameters:
login/accept_sso2_ticket=1
login/create_sso2_ticket=2
Restart sap and rerun template installer.
Regards
Stefan
Similar Messages
-
BI - Portal Template Installer Issue
Hi all,
Guess it's appropriate forum for this question regarding BI to portal connectivity. I've tried Template Installer from SAP Note 983156 but in it's first step "create RFC destination in abap" fails with following error message:
1 Create Destination in ABAP Import not successful
Element'SAPConfigLib.BIW.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.BIW.Unclassified.createRfcDestination':Error during executing Java Reflection:JCO.Client not connected in repository call
There are few threads on this issue but fail to resolve the issue here. If some came across this issue I'll be pleased if a solution can be shared here.
Regards.Issue resolved,
Template installer runs on specific SP levels on BI.
Check SAP notes for this.
Rgds. -
Hi,
I want to use the template installer to configurate the sld.
With which user can I logon the NetWeaver Administrator?
Thanks.
Regards
StefanIf you do not have an Admin role already, use J2EE_ADMIN.
We have had issues with running the template installer and had to use OSS Note 764176 to resolve the issues.
See also 939892. -
Template Installer from Java to BI error in SLD
Hello Gurus,
I've install my BI system system (ABAP Only) and my Portal system (Java Only). Now I'm running the template installer from http://host:53800/nwa.
I'm getting an error at the very first step "Test SLD connection:It was not possible to test the SLD system (SLD_HOST) with the user (SLD_ADMIN) and its password ".
The anoying thing is, I can see that both system (BI & Portal) are registered in the SLD, when checking the "visual administrator -> "SID" -> Server xx -> Services -> Configuration adaptor -> CTC -> Propertysheet " I can see that the user is SLDDSUSER and and is pointing to the correct host & port.
In SM59 I've create the RFC pointing to the already created JCO.
In http://host:53800/webdynpro/dispatcher/sap.com/tcwdtools/Explorer, when running the test, I can see that is pointing to the SLD in the portal system and not my SLD.
I went trough OSS note 983156 and follow it.
Does anybody have any idea about this?
Thanks & Regards
Jaime EstevesHello Jaime Esteves,
I have the same problem. Did you solve this issue?
If yes, how?
Regards, Michael -
Template Installer JDI NW2004s SP05
HI all,
I have installed NW2004s and updated to SP05 and try to run the template installer for usage type DI. However when I run the template installer with template "DI_Postinstallation", I got an error seems related to localization problem on step 8 (Configure CMS):
==================================================
Element 'SAPConfigLib.NDP.Unclassified.configureCms':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.NDP.Unclassified.configureCms':Error during executing Java Reflection:Not a valid URL: Unexpected character found [':' at position 8]
==================================================
Anyone encountered this problem so far?
Thanks & Regards
KelvinHi Kelvin,
Please upgrade to SR2. The fix for this issue is available there.
Best Regards,
Rishi -
Template Installer Error - after upgrade to SP8 from NW04s SP4
Hi,
After upgrading our NW04s SP4 to SP8 we are encountering the following error when we run template installer.
Element 'SAPConfigLib.J2E.Unclassified.configureCms':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.J2E.Unclassified.configureCms':Error during executing Java Reflection:null
What is the issue and the workaround?
thanks,
SuparnaHi Suparna,
The fix for this issue is available in Service Marketplace. Please apply the latest LMTOOLS patch available. This should rectify your problem.
Best Regards,
Rishi -
BI Installer issue with message" Error: ABAP Backend doesn't exist in SLD
Dear All
Please help me to solve this issue, during the BI Installer the process get errors message
"Error: ABAP Backend doesn't exist in SLD"
Follwoing the oss Note 983156 - BI configuration w. Template Installer
1.Logon to the SLD: http://<host>:<port>/sld. (Your configured SLD (central or local SLD))
Please check in Home -> Technical Systems -> select type ABAP. This
should have configuration of your ABAP (BI) system. yes the system already there.
2, goto http://host:port/index.html ->Web Dynpro ->Content Administrator-> Check SLD Connection
the connection is running well.
Please any one can help me to solve this issue,
Thanks and Best Regards,
ChrisnaHi
I found your question because I wanted the answer to it too. I'm trying to connect my Java-only stack portal to my ABAP-only stack BI system using the template in NWA. I get through all the steps up to the creation of the WebDynpro JCO RFC destinations then it fails saying "ABAP Backend doesn't exist in the SLD".
I've checked the SLD and the ABAP backend most definitely DOES exist in the SLD and the SLD is being updated by both the ABAP backend and the Java portal systems thus proving a valid connection exists between the SLD and both systems I'm trying to connect.
I think I've solved it however.
I always define a TCP alias equal to the SID for any SAP system I build and I try to make all connections to <sid>.<fully.qualified.domain.name>. This separates, to a degree, the physical server from the SAP instance.
I used this alias in the BI installation template but I noticed that the ABAP backend was listed as <SID> <hostname> in the SLD (not <SID> <sid alias>). When I used the real hostname in the template it ran to completion.
The other change I made, and it's possible that this was the real reason instead of the alias/hostname issue, was that I restarted the BI system before retrying. I only did this because I was getting error messages saying there were too many active CPIC conversations and I couldn't find them to kill them off.
Hope one or other of these things might help.
Murray -
Error while executing template installer: Step 14 Maintain JCO Destinations
Dear all:
We are applying Template Installer to perform post installation for BI-JAVA in NW2004s SP09.
Onto step 14: Maintain WebDynpro JCO Destinations, we faced the following Error message :
Element 'SAPConfigLib.BW8.Unclassified.maintainJcoDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.BW8.Unclassified.maintainJcoDestination':Error during executing Java Reflection:Failed to delete JCO client connection 'WD_ALV_MODELDATA_DEST' on 'BW8.SystemHome.sap15\kin'
Does anyone have any idea about it ?
Thank you very much
SFWe are encountering the same issue in NW2004s SP 10. Szu-Fen, did you find a solution? If so, could you please post it here?
Does anybody else have a hint how to resolve this?
kind regards,
Hartmut -
Lightroom 4.2 Installation Issue
Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct. 4.2 install ran fine.
I've read through the posts in the Lightroom forum regarding LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
1) Downloaded the installation software twice.
2) Ran the setup program in admin user mode.
3) Ran the install in admin user mode.
4) Get the following error in a Windows Installer window:
The feature you are trying to use is on a network resource that is unavailable.
Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
Use source:
c:\Users\RMJF\AppData\Local\Temp\{...}
What I have found (after displaying hidden AppData folder):
The location where the .msi file resides is different from the one defaulting in the above window.
I select this alternate path, but still cannot complete the installation.
Furthermore, when I cancel the install, I get this error:
Adobe Photoshop Lightroom 4.2 64-bit Installer Info
Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
The installation source for this product is not available. Verify that the source exists and that you can access it.
All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
So, looking for suggestions.
Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
All quite frustrating. Hope you can get me to a speedy solution.
(System info: Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare! Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well. No other apps are running during the install.)
Message was edited by: marzo19untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
even the microsoft fixid diden't help.
So also desperate. -
Error , while running the Template Installer
Hi Experts,
I am getting the following error when running the Template Installer in NWA.
When i trying to save the domain information in CMS , i am getting the following error.
Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error.
I have seen following solution in the forums.
In the SLD->Technical Landscape-> Technical System Type, select "System Landscape Directory" ensure that the SLD server you use has the 'Name Server' check box selected and right CIM Server URL is mentioned.
But i haven't find this navigation for (Technical Landscape)in my SLD again in that choosing the"System Landscape Directory" . Please let me know the correct path to fix this problem.
I have logged in to sld
http://<server>:<port>/sld
Under the "Home" -> Link having Landscape -> Technical System and Landscapes.
I have tried in both (Technical Systems and Landscapes)the places , i have nt find the "System Landscape Directory". to see the "Name Server" check box to select.
Please give the right path to select the respective check box
Please give the solution . It is urgent.
Regards
VijayHi
When you use the template installer, the users
NWDI Administration User
NWDI CMS Administration User
NWDI Development User
are automatically created and they are required. Also the steps to allocate the users to groups are automatically performed
Check the following help doc for more info
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/60dc1943c2311ce10000000a155369/frameset.htm
Perhaps you might try creating the groups manually as described
Regards
krishna -
Installation issue on opensuse 11
Hey All,<br /><br />Im a Windows guy still struggling with Linux set-upsso take it easy on me! :) and Im having a hard time getting blaze installed and running.<br /><br />This is what Ive done so far. I've successfully set-up the latest copy of openSuse11 64 bit version with: <br /> Tomcat 6.0.16 (Tested and running)<br /> ANT 1.7<br /> JAVA SDK & JDK 6<br /> Junit (ant-junit, junit, junit-javadoc, junit-manual, libcppunit-1_12-0)<br /> Downloaded both blazeds.war and blazeds_src_3-0-0-544.zip<br /> From Tomcat Manager I uploaded the blazeds.war file successfully.<br /> I unzipped the zip file into root/blazeds and from a command prompt ran ant. These are the errors Im getting:<br /> * [taskdef] Could no load definitions from resource net/sf/antcontrib/antcontrib.properties. It could not be found. (Repeats about a dozen times)<br /> * BUILD FAILED<br /> * /root/blazeds/build.xml:445: The following error occurred while executing this line:<br /> * /root/blazeds/resources/fds-ajax-bridge/build.xml:52 Problem: failed to create task or type if Cause: The name is undefined.<br /> * Action: Check the spelling<br /> * Action: Check that any custom tasks/types have been declared<br /> * Action: Check that any <presetdef>/<mac rodef> declarations have taken place.<br /><br />Variables:<br />env | grep _HOME<br /><br />ANT_HOME = /usr/share/ant<br />JRE_HOME =/usr/lib64/jvm/java/jre<br />JAVA_HOME =/usr/lib64/jvm/java/jre<br />SDK_HOME =/usr/lib64/jvm/java/jre<br />JDK_HOME =/usr/lib64/jvm/java/jre<br /><br />Any ideas?<br />Brad
Hi Alex,
Sorry I've been away and just got back. Presently I'm working from jrun4 and would like to use blazeds instead. Once my projects get going I would need the ability to use my customers already made linux/tomcat boxes and just plug in blaze.
I look forward to your answer.
Brad
On Fri, Aug 1, 2008 at 12:57 PM, Alex Glosband
<
[email protected]> wrote:
A new message was posted by Alex Glosband in
Configuration and Getting Started Discussion --
Installation issue on opensuse 11
Are you just trying to install and run BlazeDS? Why do you need to build from source?
-Alex
View/reply at
Installation issue on opensuse 11
Replies by email are OK.
Use the
unsubscribe form to cancel your email subscription. -
Forms 10g Installation issue on windows 7 Professional service pack 1
hi
I am trying to install oracle forms 10g 64 bit windows 7 Professional service pack 1 ..
Below are 2 files that i am using ..
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
But it failed but the error is ..
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 Failed <<<<
just wondering if there are any workaround ..Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7. You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified. You must have a My Oracle Support account to obtain the patch.
Now, to your question - is there a workaround; the answer is yes. There are known issues with this installer. I'll list them and their workaround.
1. The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
Workaround: Right-click the Installer and select Properties. Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for: Windows XP SP3).
2. The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
Workaround: You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes. See this Microsoft article for more information on changing VM settings. http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
This change will require you to restart your computer. After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
3. The Oracle installer MUST be installed as an "Administrator".
Workaround: Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab. Click the "Run this program as an administrator" checkbox.
4. Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
Run the Oracle installer and it should now install succesfully.
Craig... -
HP Photosmart D7360 -- Driver/Installation issue
For some reason my HP Pavillion Laptop no longer recognizes my HP Photosmart printer. I have downloaded the drivers, I have the disk and no matter what I do, I can't get the printer driver to install.
It tells me that it can load verythign BUT the driver. Any ideas?
Thanks
jstjohnWelcome to the forums @Pierre-Louis ,
I read about the installation issue you're having with your Photosmart C4280 on Windows 8. I have a guide that I have heard successful results from and I hope they work for your scenario as well!
Click this link to get started: A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
How to setup a template to issue SHA1 certs if I have a SHA256 chain
Hi All
Can any one tell me how to setup a template to issue SHA1 certs if I have a SHA256 chain. I looked at the templates and I didn’t see where it is specified?
Puneet SinghCertificate signature algorithm is CA-wide settings and independent from certificate templates. You have to configure your CA to use SHA1 signature:
certutil -setreg ca\csp\cnghashalgorithm sha1
net stop certsvc && net start certsvc
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool. -
Problem running BI template installer after upgrade to 2004s
Hello,
After upgrading our Portal from EP6 to EP7 I have a problem running the BI template installer. The failure occures right at the beginning. The installer is looking for SLD related parameters in the 'CTC> Propertysheet SystemProperties'.
But there are only three parameters in the sheet :
HOST, SYSTEM_ID, INSTANCE_ID.
If you instal a new 2004s system you see much more entries in the 'Propertysheet SystemProperties'.
My question is how to add these missing entries into the 'Propertysheet SystemProperties'.
Thanks
BoazHi Kaylan,
Actually there are only two things to manually fix after the CTC template run, which is mentioned in the Blog:
- check/correct the following settings in the NetWeaver Administrator for evaluate_assertion_ticket and ticket according SAP Note 945055
- the entry in table RSPOR_T_PORTAL for Platform and PDF fonts
If you uncertain, you can remove the created objects as stated in the Document http://scn.sap.com/docs/DOC-11607 => Page18 in the Notes Section. the CTC template is creating these objects and entries again.
Best Regards Roland
Maybe you are looking for
-
When I click the firefox icon it tells me that I have firefox 8.0.1.Under is written Firefox-is-up-to-date (shadow line) It also mentions that I use the release-update channel. When i start firefox there is a warning that I do not use the latest vers
-
How do I get after effects to render with my GPU?
Yea, really noob question, but I can't figure it out! Spent literally HOURS trying to find how to do this.. Use my GTX 670 to render instad of CPU. Can't figure it out. I finally (I think) figured out where to change the setting to raytraced rende
-
How do i tranfer files from my pc to my ipad?
how do i transfer documents from my pc to my ipad?
-
My ipod touch 4G is updated to iOS 6.1.2 and is no longer able to update any further, I want to download apps that I have on my iPhone like facebook,snapchat and instagram but these all require ios 7+ is there any way I can install an older version t
-
How do you find a file you created and saved online?
I am new to Adobe Pro. I created a file online the other day and when I log in all I get is marketing material and my account profile. Where do I find my file(s)?