How to setup a template to issue SHA1 certs if I have a SHA256 chain

Hi All
Can any one tell me how to setup a template to issue SHA1 certs if I have a SHA256 chain. I looked at the templates and I didn’t see where it is specified?
Puneet Singh

Certificate signature algorithm is CA-wide settings and independent from certificate templates. You have to configure your CA to use SHA1 signature:
certutil -setreg ca\csp\cnghashalgorithm sha1
net stop certsvc && net start certsvc
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.

Similar Messages

How to setup Appraisal Template in multiple languages?

Hi,
We are currently in R12.1.1.
We would like to setup appraisal template in multiple languages. For example,
Template 1 - English
Template 2 - Malay.
Appreciate guidance on how this can be done.
Thanks and Regards,
SC

Hi,
We are currently in R12.1.1.
We would like to setup appraisal template in multiple languages. For example,
Template 1 - English
Template 2 - Malay.
Appreciate guidance on how this can be done.
Thanks and Regards,
SC

How to setup mail template in CPS ?

Dear Expert,
Now we're using with Redwood CPS version M33.19-48733 with alert function license.
We can setup mail alert in our CPS. When any job schedule was failed or cancel. It will send automatic mail alert to us. But it send with normal information. Example : Job name xxxx was failed.
Our requirement is we would like to send with some template. Example.
========================================
Dear Customer,
Your job name xxx was failed in this system.
Please check for your job.
Regards,
Admin CPS
========================================
How can we set up this request ?
Regards,
Somkeit

From the DI documentation that comes with the installation:
To use this function, a mail client must be installed and running on the Job
Server computer that calls the function. The login account for the mail client
must have the same user name and password as the Data Integrator service.
The type of client varies by the operating system:
u2022 If the Job Server is on a computer running the Windows operating
system, then the mail client must comply with MAPI (message application
programming interface). In addition, the mail client must be configured as
the default mail client. For example, Microsoft Outlook is a MAPI-based
mail client.
If the Job Server is on a computer running the UNIX operating system,
then the mail client must be mailx-compliant.
So:
Mail client installed and configured and set as default
Mail client uses the same credentials as the job server service
Or use another function: smtp_to();
If still not working or you are not allowed to use an installed mailclient on your box, then try Blat: http://www.blat.net/

How to setup three SharePoint sites on one server?

Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paul

you need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to setup multiple base station under one network?

How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?

One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

How to get title templates library for CC?

How to get title templates library for CC? Do you have to download and install PP 6 to get them?

Try here Library, title templates, template projects missing: Premiere Pro, After Effects, Encore

How to setup a vpn over the internet

Hi ,
how to setup a vpn over the internet ? Just I have using window server 2012 r2, I already install 'remote access service' also ready enable VPN service but I can't connect to vpn server over Internet(Other network), when I connect from LAN , vpn service
is enable I can connected. My ADSL router also Enable VPN access(PPTP, L2TP, IPsec). But I can't access my server over Internet :'( . What I need to do? Help me please.
Thanks,

Hiya,
Did you have a look at this guide? - It gives you all the steps.
http://www.howtogeek.com/135996/how-to-create-a-vpn-server-on-your-windows-computer-without-installing-any-software/

How to setup guest net work in airport extreme

Hi,
i have how to setup guest net work in airport extreme?
i have the airport extreme and the airport base station as a range extantion.
all is workig good :-)/
i the init setup (od the extreme) i setup the router to support also guest network with password.
when i scan the network i canor see the guest network.
also i canot set it up from the air play (win7 sp1)
THX :-)

Mmm, generally you don't need to do much port mapping in an extreme. Not sure I understand you. What does the d-link do?

How to add custom Template transaction types ( for Quote ) ?

How to add custom template in transaction types?
Note : I have gone through below note. But not getting appropriate solution for this.
982142.1 (OM Sales Order Template Not Available In Layout Template LOV For Print&Preview)
444687.1 (OM Quote Template Not Available In Layout Template LOV for Print And Preview)
Thanks in advance..
Sameer

Hi
Thanks for your support,
Pls let me know which steps i should go ? my secanrio is inbound side only,
step 1 ) Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
step 2) do i need to write some code in BADI also to update information for my custom infotype also if yes then where and which BADI pls let me know ? because already am working on one badi HRALE00INBOUND_IDOC for few validation for incoming data.
step 3 ) add this new custom infotype in my standard ALE filters.
Pls let me know if am mistaking some where or if i have to do some thing else ?
Regards
Meeta & Glory

How to setup Datasource to use data triggers in Data Template

hi all,
Pls. let me know the process how to setup dataSourceRef that has to be mentioned in the data template tag for making use of various data triggers?
I have packaged function which will create a temporary table that I am using in my main query. This whole process should happen in the beforereport trigger.
can anyone help me in this regard.
Thanks in advance
Praneeth
null

Yes for triggers use need functions returning boolean value. These functions must reside in a package and you have to define package name as defaultPackage="package_name" in data template.

How to create matrix template help pls

hi frs,
i have generated xml file after creating matrix report in report builder.
i want to know how to create matrix template(rtf) in word document.
if i use wizard or insert> all fields i am not getting rtf like matrix.
help pls
Thanks
Rajesh

This issue is really becoming a problem for us. Does anyone have any examples of label templates. The label when generated automatically converts from pontrait to landscape. If you increase the size of the template then word complains about the page and margin size before printing.
Anyone have any ideas?
Thanks

How to setup a static IP for a wireless printer

This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it. For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better. At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected". The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
The only way to fix this is reboot, and then the printer shows up again in Preferences. I select it and all is well again...until a few days pass and the same thing happens again. Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use. I also have an Epson Artisan 725 and the same thing happens with it about once a week. Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer. Any help would be greatly appreciated.

You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
If you have AirPOrt Extreme, you could do this:
In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
Start up the AiPort Admin Utility
Go to Network tab
click + in the DHCP reservations
Choose an IP you want for your ATV & Enter the MAC address
From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
It is not a static IP in a true sense, but behaves just like one.
Works great for me...
If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

How to setup a forms function in R12 to launch an URL?

Hi All,
In 11i we could create a forms function of the type "SSWA plsql function" to launch a html page from the menu.
How is that supposed to work in R12?
So my question is, how to setup a forms function to launch an URL like www.oracle.com in R12?
thanks,
thierry

Hi, first set the Profile 'Restricted Text Input' to 'No' for your User.
Then create a form function like below:
Functional Administrator > Core Services > Function > Create (button)
Name: XX_GOOGLE
Code: XX_GOOGLE
Type: SSWA jsp function
Maintenance Mode Support : none
Context Dependance: Responsibility
(press continue button)
HTML Call: javascript:void window.open("http://www.google.com")
Leave other fields blank
Add to HR_EMPLOYEE_DIRECT_ACCESS_V4.0 menu:
500 XX Google XX_GOOGLE
This will pop up your external webpage in a new window.
The issue is that it only works from the Navigator framework page (not from within Core Forms)
Regards,
Mike

How to setup a second router?

Does anyone know if there are instructtions somewhere that will tell me how to setup a second router in front of my Actiontec MI424?
I am trying to use a Sonos music system through my computer and it has been recommended to me that I try to use a different router in front of the Actiontec.
Any help would be appreciated.
Thanks.

mniven wrote:
Does anyone know if there are instructtions somewhere that will tell me how to setup a second router in front of my Actiontec MI424?
I am trying to use a Sonos music system through my computer and it has been recommended to me that I try to use a different router in front of the Actiontec.
Any help would be appreciated.
Thanks.
Strange thing to recommend, did they say why?
The Sonos system appears to be just an in house music distribution system that besides accessing in house dvices can also access web based music sources. Are you trying to stream audio via RTSP? as I see another post here regarding what looks like packet fragmentation issues when accessing RTSP thru an Actiontec router.

How to setup a template to issue SHA1 certs if I have a SHA256 chain

Similar Messages

Maybe you are looking for