Template Trouble--Extra Code Added

For some reason, an extra 
When I update my template and save, the changes don't apply
to the web pages because of an imbalanced  tag.
The extra <!-- code cannot be removed from the pages,
because it is part of the template code. It also doesn't go away if
I detach the template from the page. I'm stumped.

We have to see the code on your Template page, please. That's
where the
answer is.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"MGCTracy" <[email protected]> wrote in
message
news:gojdtr$qrg$[email protected]..
> For some reason, an extra 
>
> When I update my template and save, the changes don't
apply to the web
> pages
> because of an imbalanced  tag.
>
> The extra <!-- code cannot be removed from the pages,
because it is part
> of
> the template code. It also doesn't go away if I detach
the template from
> the
> page. I'm stumped.
>

Similar Messages

Extra (Duplicate) Code Added After Editing Page

At first I thought this was a problem when using templates
but I've confirmed that it's more widespread that that. I've also
found this posted a couple of times on other boards but nobody
seems to have an answer.
After I edit a page (html or php, doesn't make a difference)
in Dreamweaver 8.02 extra code is added at the bottom of the page.
This code duplicates a portion of what is already on the page, and
it appears (although I can't say for certain) that the more editing
I do the more code is added.
The extra code is added after the closing </html> tag.
Sometimes a portion of it will show up in Code view but more often
than not I have to view the page in a text editor and remove it
outside of Dreamweaver. But once the page is edited again then the
problem repeats.
Bizarre.
Thanks.

> I'll try and re-create the problem and post the before
and after.
The answer is always in the code.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"SilverR252" <[email protected]> wrote in
message
news:eneb22$2cg$[email protected]..
>
quote:
You just haven't read the answers posted.
> Well, I spent over an hour googling variations of the
problems and found
> it
> referenced in only a couple of places. In neither post
was there an
> answer. You
> can see that
>
http://groups.google.com/group/macromedia.dreamweaver/browse_thread/thread/b35b5
>
0466da5ea05/8c5264cb11bf7d36?lnk=st&q=dreamweaver+extra+code&rnum=3#8c5264cb11bf
> 7d36 and
>
http://groups.google.com/group/macromedia.dreamweaver/browse_thread/thread/ae47c
>
5731780634d/012a96d2fb5c818f?lnk=st&q=dreamweaver+extra+code&rnum=8#012a96d2fb5c
> 818f although the latter refers to MX.
>
>
quote:
Show us your template page, please.
> As I said, I originally thought this was a problem only
on child pages of
> templates. However, it's happening in non-template
pages.
>
> I'll try and re-create the problem and post the before
and after.
>
> Thanks.
>

Adobe CS5 adding extra code to an uneditable section of the page?

I have a website that was created in Dreamweaver and has editable regions set for other people to manage the content using Contribute. The main author of the website is using Contribute CS5, and it is adding extra code to an uneditable region of the page (as defined in the template), which messes up the layout of the header and footer. Can anyone help me figure out why this is happening and how to fix it?
I have edited the page successfully through my version of Contribute, which is 6.5--it does not add that extra junk into the code.
The solution, might be to move my user over to 6.5, but I want to find out why it is happening, before we spend any additional money on the program.

What's the code?

User entries in report templates: a new entry added cannot be displayed

Hi all,
I have the following issue in the EH&S module. I added a new field as a user-entry in a specific report template (under transaction code CG43). It is a non-standard field added thanks to the user-entry functionality. After that, I got to transaction CBGL_MP01 in order to display a label and populate my user -entry field with a value and it happens that the object description cannot be seen. Have a look at my screenshot enclosed, please.
This is happening under Delivery / Make-to-Stock scenario but the field is fully visible under GENERIC scenario.
The thing is that, adding other fields (standard and non-standard) does not happen the same thing. It is only with this field. I am puzzled.
I would appreciate any advice / comment / help on the matter, please.
Thank you so much

Hi
But the same field is displayed on other scenario ?
[This is happening under Delivery / Make-to-Stock scenario but the field is fully visible under GENERIC scenario.]
In that case, there would be two possibilities
1. Authorization : But you checked & its positive.
2. Since its your custom made symbol, there may be some problem in fetching the description data (my guess. may be wrong).:
So may be you check out the Program used for these particular Scenarios. Check label printing transaction program & Function module for Data Determination. (May be helpful.)
Regards
Subash Sankar

Populate the extra fields added to the DS

I want to populate extract structure for Transaction data .
using CMOD For field BLART coming from Table COVP
In CMOD What code do you write to populate the extra fields added to the DS
thanks

using DS : 0CO_OM_WBS_6
which uses delta
thanks

[svn:fx-trunk] 10459: Change to ensure ScriptNodes are no longer part of the node tree after interface compilation stage in order to avoid the extra code that was necessary to avoid tripping over them during type checking , etc.

Revision: 10459
Author:   [email protected]
Date:     2009-09-21 08:42:44 -0700 (Mon, 21 Sep 2009)
Log Message:
Change to ensure ScriptNodes are no longer part of the node tree after interface compilation stage in order to avoid the extra code that was necessary to avoid tripping over them during type checking, etc.
Improving revision 10199 a bit, to allow for single line comments.
QE notes: None
Doc notes: None
Bugs: SDK-22027
Reviewer: Paul
Tests run: Checking, Compiler cyclones
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22027
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/AbstractSyntaxTreeUtil.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AbstractBuilder.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBuilder.java

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

VPP needs an extra code with Configurator?

I've got a question about configurator and VPP codes. The help file for Configurator says you import an app and then import the spreadsheet of codes to authorize the apps.
So I purchased 32 copies of an app for the 32 ipads in our cart.
I went into iTunes and redeemed 1 of the codes so that I could download the app.
I imported this app into Configurator.
I sync'd with the 32 iPads.
Configurator says I'm short 1 code, I assume since I used 1 to download the app.
So how am I supposed to download the app without using one of the codes or buying an extra copy of the app? It's not a big deal for a .49 app, but if I was spending 9.99 on each app, I don't want to have to buy an extra code just so I can get the app to download. Do I have to redeem in the AppStore on an iPad instead of in iTunes?
Has anyone else tried this and had this problem?
Thanks for any suggestions

I have also run in to this problem. Considering how large the denominations are of Volume Vouchers, it's unacceptable to think that we should have to purchase one extra of each paid App we'd like.
I also have run in to a corresponding issue with this. After I imported my codes and synced up 4 of my 5 iPads, like you said, all 5 of my codes were used because of the one taken by iTunes. After reading the Configurator instructions, I tried to delete the App from Configurator, re-add it, and re-import my code spreadsheet. Now for all 5 codes it says "This code has been redeemed" and will not even let me reinstall it on an iPad it was previously "redeemed" on through Configurator. If I run the 4 iPads that I've already prepared and supervised with Configurator back through, I'll lose this paid App entirely. Considering it's a $20 App and I'm out $100 total, using Configurator with any paid Apps appears far too risky. Is there no better way to manage Paid App redemption codes? Am I missing something?

Customizing Code Templates for the Code Editor

Our customer wants to have a standerd code edit environment for developers using Jdveloper. Therefore, there is a need to customize the Code Template for the Code Editor. The question is once after it is customized, whether it is possible to export the template to the Jdveloper setup for all the developers, and if yes, then how to? Thanks!

Just distribute the java.tpl file from the <jdev_install>\jdev\system9.0.x.x directory. That should do the trick.
Sascha

Extra days added after iSync

After years of using a Palm and Palm desktop as a diary I thought I would give iCal and my Sony Erricson W715 a try. (I had to get a plug-in to enable my phone to be used with iSync)
I prepared a iCal calendar for the next 3 months and then using iSync copied it to my phone. It all looked good but then I noticed that on the phone some 2 or 3 day timed repeated events had an extra day added to them. It all still looks correct on iCal.
There is not much point of continuing with this if it going to be inaccurate. I might as well just stick with the Palm.
Can anyone suggest what went wrong and if it can be put right?

It's most likely a Daylight Savings/Time Zone issue.
Sony Ericsson phones do not handle the changeover from British Summer Time to Greenwich Mean Time very well at all.
Events that occur after the next time the BST changes (i.e. after 31st October 2010) are likely to have an extra hour added to them, meaning they go over into the next day on the phone.
Unfortunately, there's no workaround for this. It's a bug which affects all Sony Ericsson phones and has gone on forever, despite Sony Ericsson having been notified of it on many occasions.
If you sync the phone again, after 31st October, all events will be ok again, until 27th March 2011, when events after that date will be out by one hour again.

How long before an extra is added to my plan?

how long before an extra is added to my current phone. I have used all my data and have requested additional data.

It should be instant, try rebooting the device.

Issues with Robo Help adding extra code

I am currently using RoboHelp 10 version 10.0.1.292
I am trying to write the code and then input into Robo help for future editing. I am new to HTML and RoboHelp as well.
The issue is when I add the code like so below it comes out with an added <p> </p> in robohelp code and causes the Iframe to not work for one of the drop down menus. Is it possible to disable this feature adding this in or a way to get the Iframe to still work? In screen shot is what the problem is the info highlighted after the Account portion.
My Code Below
<body>
    <header>
        <span id="pagetitle">Account</span>
        <div id="container-pageselect">
            <iframe src="Menu/MainMenu.html"></iframe>
        </div>
    </header>
        <div id="content">
        <div class="content-wrapper">
            <div id="help-content">
Robo Helps Output
<body>
<header> <span id="pagetitle">Account</span>
<div id="container-pageselect">
<iframe src="Menu/MainMenu.html">
<p> </p>
</iframe>
</div>
</header>
<div id="content">
<div class="content-wrapper">
<div id="help-content">

RoboHelp is not an HTML editor in the same way as say Dreamweaver. The editor can add processing instructions that tell Rh how to create the output files but those PIs do not get into the help. HTML editors in the general sense have the same code in the source and the output.
That is one reason the editor is different. It also assumes that the majority of users will not have the same HTML skills as someone using say Dreamweaver and it is designed to make some corrections automatically. Sometimes though the result of that is Rh makes changes you don't want.
I'm wondering why you are coding in a text editor though when Rh is designed to write the code for you.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Code added to template not working after publishing

We want to track the usage and see who is hitting the pages and where they are hitting them from. A developer at our company who wrote some code for us to be able to do this using an includes file. When we place the code directly into the HTM page using notepad (after publishing) it works fine. When we put the code into the template (.HTT) and then publish it, that code does not appear in the published page.
Is there a setting in the template that would not let us throw a line of code for a server side include in the RoboHelp WYSIWYG editor? Or how do you add such code to the template and have it pull into every page it displays?
Using RH8, publishing WebHelp and not using RH Server.
Thanks.

This question is related to webhelp, not Microsoft HTML Help (CHMs) so I have moved it.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Dreamweaver adding extra code (or breaking existing code) with simple change?

Hi there!
We're using the following template: http://www.wiseguys-themes.com/kenway/light/index.html
And whenever we make a change in DW and save it, we get errors. The template previews fine before any changes. Even a change as simple as the page title is causing errors. Why is this happening?
Any help is GREATLY appreciate. We're against a deadline and struggling to find the problem.

I should preface its only happening in IE8, and this template is for IE8+. It seems to working now on the server (link below), but why would it preview fine before changes, and then get scripting errors after one?
http://hollandphysicians.com/light/

Why extra space added in generated HTML?

We've noticed that WebLogic adds a significant amount of space in generated
          HTML (like 3.5K). We're curious if there is a way to prevent this or limit
          the amount of this space since this adds extra unnecessary wait time for
          dialup users. Does anyone have experience with this?


          My reply was entirely garbled ... I am trying again
                    Some HTML<br>
          <% jsp code ...<br>
          %>
                              Instead use...
                    Some HTML<% <BR>
          jsp code ...<br>
          %>
                                        "Shubhrajit Chatterjee" <[email protected]> wrote:
          >
          >Hi,
          >In case the problem has not been solved yet...
          >
          >If you begin a scriptlet tag(or any server side tag) on a new line like
          >this...
          >
          >Some HTML
          ><% jsp code ...
          >%>
          >
          >then when the servlet is generated, one empty out.println() is coded
          >due to the
          >empty place between the scrptlet tag, and thus generating an empty line
          >
          >You can prevent this by starting every scriptlet ( or any other serverside
          >tag
          >in the same line as HTML as given below
          >
          >Some HTML<%
          >Some JSP
          >%>
          >
          >However, only two characters (CR and LF are added if the scriptlet starts
          >on the
          >first column, so this won't make the page much slower. Avoid giving spaces
          >before
          >starting scriptlets, however...
          >
          >Shubhrajit
          >
          >
          >
          >"Dmitry Namiot" <[email protected]> wrote:
          >>
          >>Check out Optimize taglib from Coldtags suite:
          >>http://www.servletsuite.com/jsp.htm
          >>
          >>"chip" <[email protected]> wrote:
          >>>We've noticed that WebLogic adds a significant amount of space in generated
          >>>HTML (like 3.5K). We're curious if there is a way to prevent this
          >or
          >>>limit
          >>>the amount of this space since this adds extra unnecessary wait time
          >>>for
          >>>dialup users. Does anyone have experience with this?
          >>>
          >>>
          >>
          >

Extra spaces added (that I can't get rid of) when using STHeiti font. Anything I can do?

Hi there,
When I use the font that I want to use (STHeiti), extra spaces get added automatically—spaces that, by the way, I can’t ‘delete’—after every apostrophe (or single quotation mark). See screen grabs below:
Here's another example:
Do you know how I can make these spaces go away? When I do a search on the internet (InDesign STHeiti), I see that others have had other types of problems with this font… having to do with exporting a finished project to pdf and getting it printed.
In the context of talking about it, one person says that the STHeiti font "is installed as part of the Apple operating system, and is probably only meant for onscreen display".
But someone else adds: "the font is installed, by default, on all macs running 10.4 and above (possibly further back than that, but lets go with what we know), so opening the file at the printers on such a mac will have the font available”
I'm on my Mac, though (not yet ready for the printer), so why do I have a problem using this font?
I know I could use another font, but this STHeiti is a really nice one!
Thanks for any advice,
Malcolm

Wow... that works beautifully.
I've done it, but before proceeding too much further I'll google and try to find out more about this "Use Typographer's Quotes" setting. Don't want it to bite me down the road.
Thanks very much for the tip—
Malcolm

Template Trouble--Extra Code Added

Similar Messages

Maybe you are looking for