Templates with many specs in Lineage History

Bussiness is inquiring about a "potential" performance issue with Templates. Once a Template has been used to create possibly 100's or even 1000's of specs and has the relationships populated in the Lineage History of the template for those 100's to 1000's of specs, will we have a performance issue when we access the template?

Update:
After more investigation Feng did find that this could be a performance issue if there were many specs created from the Template.
In 6.1.1 (next major release) we decided to not track the 'create' event on the template, because the data is actually available on the spec itself.
Thanks for bringing this up.
Segal

Similar Messages

HT4168 I have created an 100 page booklet in Pages, with many photographs, can I export it to ePub, and make an electronic book, because it says that "Note: The Pages document must have been created using a word processing template"?

I have created an 100 page booklet in Pages, with many photographs, and much written word, can I export it to ePub, and make an electronic book, because it says that "Note: The Pages document must have been created using a word processing template"?....
Basically what I want to do is publish the document into both an eDocument, and a hard copy document. What is the best way to do this?

No Peter, this statement came right off the Apple ePub statement when outlining how to use ePub. the full context is:
Creating ePub files with Pages
Summary
Learn how to create ePub files with Pages.
Products Affected
Pages '09
ePub is an open ebook standard produced by the International Digital Publishing Forum. Pages ’09 lets you export your documents in ePub format for reading with iBooks on iPhone, iPad, or iPod touch.
iBooks supports both ePub and PDF file formats, and you can export both from Pages.
When to use ePub or PDF
Use ePub when text is the most important part of your document, for example when you create a book, a report, a paper, a thesis, or classroom reading material.
More details on using ePubUse PDF when layout is the most important part of your document, for example when you create a brochure, a flyer, or a manual with multiple illustrations.
More details on using PDF
Creating an ePub Document to Read in iBooks
You can export any Pages word processing document to the ePub file format for reading in an ePub reader, such as the iBooks application on the iPad, iPhone, or iPod touch. Documents created in page layout templates can’t be exported to the ePub format.
Documents exported to ePub format will look different than their Pages counterparts. If you want to get the best document fidelity between the Pages and ePub formats, style your Pages document with paragraph styles and other formatting attributes allowed in an ePub file. A sample document is provided on the Apple Support site that features styles and guidelines to help you create a Pages document that’s optimized for export to the ePub file format, which you can use as a template or a guide. To learn more about using paragraph styles in Pages, see the topics under the heading “Working with Styles” in the Pages built-in help.
To read your ePub document in iBooks on your mobile device, you must transfer the ePub file that you create onto your device.
To use the “ePub Best Practices” sample documentTo learn more about using the ePub format and get a better feel for how a Pages document might appear as a book in iBooks, it’s a good idea to download the “ePub Best Practices” sample document. After reading the guidelines and instructions within the document, you can use it as a template to create your own document. You can also import the styles from the sample document into a new document you create.
Download the “ePub Best Practices” sample document at the following web address:
http://images.apple.com/support/pages/docs/ePub_Best_Practices_EN.zip
Do either of the following:Use the sample document as a template.Import the paragraph styles from the sample document into a new or existing Pages document.
Export the document you create to ePub format to see how it looks in iBooks.
Preparing an existing Pages document for export to ePub format
Documents exported to the ePub format automatically appear with page breaks before every chapter. A table of contents is automatically generated, which allows readers to jump quickly to any chapter title, heading, or subheading in the book. In order to create a meaningful table of contents, it’s important to apply appropriate styles within your document. The ePub reader uses the paragraph styles to determine which items should appear in the table of contents for your book.
Note: The Pages document must have been created using a word processing template.

Is it possible that 1 RTF template with 1 xml file produces many PDF files

Hello,
We are using XML publisher with eBS.
As part of it, we've got treatments that generate invoices.
One treatment produces 1 big XML file with many invoices in it.
Currently, this big XML file generates one big PDF file with all the invoices.
I'd like to know if it's possible to keep the big XML file (with many invoices), and instead, generate 1 PDF file per invoice ?
Basically we would like to split the big PDF file into small PDF, one PDF file per invoice .
If it's possible, then, how can we do it ?
I hope my explanation is clear.
Thanks in advance for your help,
Olivier

Have you tried the BI publisher bursting feature?
Take a look at this:
http://www.strsoftware.com/wp-content/uploads/2011/09/Oracle-EBS-and-BI-Publisher-Report-Creation-Bursting-and-Delivery.pdf
http://garethroberts.blogspot.com/2008/03/bi-publisher-ebs-bursting-101.html
Thanks,
Bipuser

Excel Template with Multiple Sheets

Hi everyone,
I need to build Excel template with multiple sheets where each sheet should have at-least one chart.
Thanks
Aravind

Hi
Could you please explain those ways here.?
Many Thanks,
BK

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues). And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

Problem in templates with hyperlinks to bookmarks

Hi. I'm using Robohelp X5. I have a template with a hyperlink
in the footer, to link to the top of the page. The link works fine
in topics that are in the root HTML Files folder (in the Project
Manager tab) but it doesn't work in topics that are in sub-folders.
The hyperlink target is being prefixed with "../" to account for
the extra level. I have been asked not to use Javascript in the
help, so need to use html. Does anyone know of a way to prevent the
link being altered in the sub-level topics, or some other solution
to the problem?
I can't ask all the authors not to use folders to organise
their topics, as some of the projects are large and they also use
the folder structure when generating the TOC. I'd also rather not
have to advise them to create a different version of the template
for each folder in the topic structure, which is the only other way
round it I can think of. Any advice would be greatly
appreciated.

Hi again Kat
Hmmm, quite a conundrum you have there, eh?
Well, there is one other possibility. Similar to the number
42, you probably won't like it much. But here goes anyway.
Assuming you are the person who has final say over the
project, meaning that you are the only one that generates and
distributes and the others are simply contributors, you could use
something like ReplacEm or FAR to perform a small post generation
process of performing a search and replace. You would search only
the folders for the desired string looking for ../# and eliminate
the ../ or possibly even ../../ or ../../../ depending on how many
folder levels you have.
Besides that, I'm about out of ideas.
Sincerely... Rick

Working with many different formats/codecs/frame rates within one Sequence.

Good Afternoon,
As an editor for an ad agency I am being tasked with cutting a demo reel together. Nothing too difficult.
The reel is to include video footage of past projects, going back a couple years or so. The footage that I will be given will undoubtably be in a variety of formats, codecs, frame sizes, frame rates, etc (all SD, though). Delivery is SD DVD.
My question is this:
What is the best way to set up my timeline for a barrage of clips with differing specs?
Do I encode all the media assets FIRST to conform to my Sequence Settings? Or do I just deal with the large amounts of timeline rendering as I work with different formats and codecs? Or do I....?
I am running FCP 5.1.4, so I don't have the Open Timeline feature going for me.
I appreciate any advice and tips you can offer!
Thanks!

Your final format is NTSC SD DVD, so you're going to have to go to 720x480 at some point. This is what I would upscale to. Make sure your "client" knows that the 320x240 wmv's may not look to good in the final production.
Personally I use MPEG Streamclip (an excellent FREE application that's part of many a pro's arsenal) for this kind of conversion and/or upscaling. It's not particularly intuitive (especially for upscaling) so read the manual.
You may need to get hold of Flip4Mac or Episode for the wmv conversions.
I would tend to convert to a lossless codec like Apple Uncompressed or Animation. You could try going to NTSC-DV but you're going to lose some quality initially and again when you do the final mpeg2 compression.
Experiment.

Sub templates with Locale - BIP 10G

Hi,
Does BI Publisher and desktop 10G support use of sub templates with locale information being passed while calling them ?
Many thanks
Rohit

Hi,
Does BI Publisher and desktop 10G support use of sub templates with locale information being passed while calling them ?
Many thanks
Rohit

When I'm on a page with many links it used to highlight or underline the link I was looking at ... so when it opened the link in a new window, I could look back and not lose my place

when I'm on a page with many links it used to highlight or underline the link I was looking at ... so when it opened the link in a new window, I could look back and not lose my place

It sounds like you have chosen a publishing template rather than a word processing template. There are two basic modes in MS Word: word processing and publishing layout. Word processing mode (and all word processing templates) have a continuous text box in the page for writing text. The publishing layout mode (and publishing templates) are documents that have text boxes placed for articles, titles, pictures, etc. Be sure to choose the word document template and you’ll get what you expect. Do not choose the word publishing document.

How to create a sequence with followoing specs....

Hello all,
I have to create a sequence with following specs:
data type: number
no. of digits: 6
classification:
1st digit starts from 5
next 2 digits represent current year e.g. 06
and next 3 digits = running serial (001 to 999)
increament: 1
example: 506001
please help me
regards/gulzar

it is pre assumption that the running serial will not go beyond 999 in a year
the ceiling is 500 per year
yes its a y2.1k issue but we are not supposed to store a uniqe identifier for more than 100 years in the database.
i m a novice, can you please suggest a code template for such a seq.?

How to save site template with subsites..?

Hi,
I am trying to save site as template., and found that subsites are not part of that site template..
Can anybody tell me how can I save site as template with subsites.?...
Thanks,
Parag

As Paul said you can only save a single site at a time. I'm not sure specifically what you are trying to do, but it wouldn't be terribly difficult to write some code which provisions a site with specific subsites. I've seen this type of scenario
handled many times via both manual and automated processes. It all just depends on the requirements.John Ross
SharePoint Server MVP | Sr. Consultant SharePoint911:
SharePoint Consulting
Blog: http://www.sharepoint911.com/blogs/john
Twitter: @JohnRossJr
Professional SharePoint 2010 Branding and User Interface Design

Issue with using SSXA region templates with Content Presenter.

I am using Content Presenter taskflow in Webcenter Portal. When i try to use the SSXA region template with content presenter, it doesnot render the html markup. But if i use normal UCM region templates(hscp), its rendering the html markup properly.
Http Server acts as a proxy for both webcenter and ucm. Enabled SiteStudio, SiteStudioforExternalApplications, Webcenter Configure and other required features in Webcenter. Can any one tell me, if i missed any step?
All i am getting the output as
${data.body}
Taskflow binding
<taskFlow id="doclibcontentpresenter1"
taskFlowId="/oracle/webcenter/doclib/view/jsf/taskflows/presenter/contentPresenter.xml#doclib-content-presenter"
activation="deferred"
xmlns="http://xmlns.oracle.com/adf/controller/binding">
<parameters>
<parameter id="taskFlowInstId"
value="${'23a55c99-abdd-4dea-a24a-1e04a68aa0bf'}"/>
<parameter id="datasourceType" value="${'dsTypeSingleNode'}"/>
<parameter id="datasource"
value="${'UCM#dDocName:JLR_WYSIWYG_DATA'}"/>
<parameter id="templateCategory" value="${''}"/>
<parameter id="templateView" value="${'WYSIWYG_BLOCK_1_RGT'}"/>
<parameter id="regionTemplate" value="${true}"/>
<parameter id="maxResults" value="${''}"/>
</parameters>
</taskFlow>
region template:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:wcm="http://www.oracle.com/jsp/wcm">
<wcm:dataFile var="data"/>
${data.body}
</jsp:root>
This uses one region definition containing WYSIWYG element. I am able to edit and could type the html markup or data in WYSIWYG editor at contribution mode, but when i click save and close, all i am getting output as ${data.body}
I manually verified the data file in UCM, and i could see the information stored (the data entered in contribution mode)

Prasath,
I'm not 100% sure but i believe that WebCenter does not support everything from the WCM tags. You can read the topic on SSXA on the WebCenter EMG:
https://groups.google.com/group/webcenter-emg/browse_thread/thread/2ef9cca0252a0ae3
Just a quote:
"With the 11.1.1.4 release, WebCenter is very much targeted at the type of sites that would have previously been done using the WCM components (eg. Extranet, Internet sites). By surfacing the site studio region templates (and allowing in place editing of the documents) many of the use cases can be met. The question now is not whether,or not, the native templating + region support is sufficient for your needs (WebCenter does not support all the WCM artefacts as yet). "
Regards
Yannick

BP with many contact persons

Dear All,
How to upload business Partners with many contact persons details.
iam unable to do with DTW with Contact empolyees templet.
any one guide me
thanks

For Importing BP Contacts.
In the BusinessPartners template just fill the RecordKey and CardCode, leave everything else blank
On the ContactEmployees template
enter the recordkey corresponding to the BP in the BusinessPartners template and repeat the recordkey if entering mutiple contacts for the same BP.
NO NEED TO ENTER LINENUM
Attached the BP template after highlighting BusinessPArtners in STEP 2 and highighlight contactEmployees and Browse and select the contact employees template
ON STEP 3, click the Target Data tab and Only Check "Add all Items into Schema if can't ......"
Proceed by clicking Next and complete the import. Please check both Import and Update in STEP 4

After Effects customize template with web browser?(layer name giving a variable names)?

After Effects customize template with web browser?(layer name giving a variable names)?
so many web sites provideing this service ...online intro makers
please help me .what plugins using .how to setup this kind of service?

Sir please see these sites...
(www.makewebvideo.com,
templates.introchamp.com.....)
some sites are in online ...these are using AE for render

HT204416 My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.

My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.

1. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
2. Select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.
3. If the above steps don't resolve the problem, please describe it in more detail.

Templates with many specs in Lineage History

Similar Messages

Maybe you are looking for