Tempo change bug in 64 bit - causes crash, help?

Anybody else have this problem? In 64 bit in a long timeline session with multiple tempo events (say 50 plus for a film score).
Changing tempo in the tempo window causes a crash. Only fix has been to revert to 32 bit mode - which is a drag because I need 64 for my timeline (whole film score - 2000 bars long).
Bug has been present across multiple flies, tried all the usual stuff, permissions, pref. rebuild etc. Bug was also present 9.1.3, and still here in 9.1.4
any fixes, workarounds welcome until Apple fixes.

bump - this is still driving me crazy- anyone else have this problem?

Similar Messages

KSLD bug report: 32 bit causes target panic

Since the bug report link:
http://soldc.sun.com/developer/support/driver/tools/KSLD/bug-report.html
goes to a non existant email address, I thought I would post here.
Setup:
ksld 1.01
target and host booted with kernel/unix (32 bit)
/proto directory struct as described in starting ksld doc
debugging ramd driver example
ramd directory:
drwxr-xr-x 4 root other 512 Feb 11 12:40 .
drwxr-xr-x 10 root other 512 Feb 11 12:47 ..
drwxrwxrwx 2 bin bin 512 Feb 11 10:26 777
-rw-r--r-- 1 root other 341 Feb 11 11:31 Makefile
-rw-r--r-- 1 root other 1610 Apr 24 2001 README
-rw-r--r-- 1 root other 3588 Apr 18 2001 install
lrwxrwxrwx 1 root other 52 Feb 11 10:47 misc -> /export/home/ksld-space/proto/root_sparc/kernel/misc
-rw-r--r-- 1 root other 2523 Apr 18 2001 ntestram.c
-rw-r--r-- 1 root other 2542 Apr 18 2001 printinfo.c
lrwxrwxrwx 1 root other 6 Feb 11 10:46 proto -> /proto
-rw-r--r-- 1 root other 25713 Feb 11 11:29 ramd.c
-rw-r--r-- 1 root other 291 Apr 18 2001 ramd.conf
-rw-r--r-- 1 root other 210 Apr 18 2001 ramio.h
drwxrwxrwx 4 bin bin 512 Feb 11 19:51 sparc
-rw-r--r-- 1 root other 1785 Apr 18 2001 testram.c
lrwxrwxrwx 1 root other 67 Feb 11 10:48 unix.281 -> /export/home/ksld-space/proto/root_sparc/platform/sun4u/kernel/unix
HOST output
home1# ksld -t hardwire unix.281 99
Reading unix.281
KSLD v1.0 on sun4u [SunOS 5.8]
Current thread is 0x4001fe60
Reading krtld
Reading genunix
Reading platmod
Reading SUNW,UltraSPARC-II
Reading specfs
Reading TS
Reading TS_DPTBL
Reading ufs
Reading fssnap_if
Reading rpcmod
Reading ip
Reading rootnex
Reading options
Reading sad
Reading pseudo
Reading sd
Reading scsi
Reading glm
Reading pcipsy
Reading dada
Reading todmostek
Reading procfs
Reading sockfs
Reading clone
Reading ip6
Reading tcp
Reading md5
Reading tcp6
Reading udp
Reading udp6
Reading icmp
Reading icmp6
Reading arp
Reading timod
Reading conskbd
Reading wc
Reading ebus
Reading su
Reading kb
Reading ms
Reading consms
Reading se
Reading elfexec
Reading fifofs
Reading ldterm
Reading ttcompat
Reading zs
Reading ptsl
Reading ptc
Reading rts
Reading tl
Reading keysock
Reading sysmsg
Reading cn
Reading pipe
Reading mm
Reading hme
Reading ufs_log
Reading doorfs
Reading devinfo
Reading iwscn
Reading log
Reading sy
Reading fctl
ksld_dbx: can't stat /platform/sun4u/kernel/drv/afb -- No such file or directory
Reading afb
ksld_dbx: can't open /platform/sun4u/kernel/drv/afb -- No such file or directory
Reading fd
Reading busra
Reading cs
Reading winlock
Reading seg_drv
Reading usba
Reading kstat
Reading vol
Reading cpc
Reading tnf
Reading pcihp
Reading hpcsvc
Reading pcicfg
Reading nfssrv
Reading nfs
Reading rpcsec
Reading tlimod
Reading seg_mapdev
Reading inst_sync
Reading mntfs
Reading tmpfs
Reading klmmod
Reading autofs
Reading connld
Reading bootdev
Reading shmsys
Reading ipc
Reading ramd
Reading kaio
detected a multithreaded program
t@0 stopped in (unknown) at 0xedd000d8
0xedd000d8: ta %icc,%g0 + 125
(ksld_dbx) module -v ramd.o
Module: ramd.o
Language: ansic
Debugging information: read [stabs version: 3.1]
Source file: /opt/SUNWddk/src/drivers/ramd/ramd.c
Object file: /opt/SUNWddk/src/drivers/ramd/sparc/obj32/ramd.o
Loadobject: /usr/kernel/drv/ramd
(ksld_dbx) stop in ram_strategy
(2) stop in ram_strategy
poll in failed
can't set breakpoint
TARGET output:
connected
New connection: uid 0, fd 7
Begin traceback... sp = edd48290
Called from edd009dc, fp=edd47b41, args=34 edd308ee eddc40a8 34 edd042f0 edd042ec
Called from edd03624, fp=edd47c11, args=fff74000 edda51f0 102d087a ffffffff91d0207e 0 4
Called from edd0c0d0, fp=edd47cd1, args=102d087a 91d0207e ff1bd714102d087a 100 edd48608 27
Called from edd0a394, fp=edd47d81, args=eddb7788 8 eddc16a1 f0000 1 ffff
Called from edd176d4, fp=edd47e31, args=ffff eddb7788 0 1 0 eddc1690
Called from edd0e470, fp=edd47f41, args=edd49058 0 0 3c 0 edda69d8
Called from edd0e214, fp=edd47ff1, args=eddb6d58 eddc1690 edd49158 ffffffffffffffff 10000 edd483e0
Called from edd0e154, fp=edd480a1, args=eddc1640 edda3550 0 0 0 0
Called from edd071b4, fp=edd48121, args=0 0 0 0 0 0
Called from 0, fp=0, args=0 0 0 0 0 0
End traceback...
abort jump: trap 34 sp edd48290 pc edd042ec npc edd042f0
etext edd308ee estack edd489a0 edata edda2388 nofault edda2658
ksld_kadb[0]: (`o403P0801So6mLD42d8N_lK^bH00004)(`o403P0801So6mLD42d8N_lK^bH0000
panic[cpu0]/thread=4001fe60: BAD TRAP: type=34 rp=4002fbc0 addr=40030507 mmu_fsr=0
sched: alignment error:
addr=0x40030507
pid=0, pc=0xedd2ba78, sp=0x4002fc50, tstate=0x1404, context=0x0
g1-g7: 1000c000, edda1f78, edda1f78, 0, edda2658, 14aef0, 4001fe60
panic: entering debugger (continue to save dump)
Trap 7d
What is wrong with the setup,when a breakpoint would cause a traceback and panic on the target?

One other possibility is having sufficient rights, especially if you are invoking it via some other app, rather than manually as a logged in user. If you are not logged in and instead invoke it via a web site action, I believe you will have problems reading the registry, accessing a desktop, writing to disk, etc.
Sorry I can't be more definitive, but perhaps it will help.
Please post your conclusion, if you find it.
--Ian

Sec. update causes crash. help using DiskWarrior

hello folks
I updated via Software Update and crashed mightily. I think I'm back up and running now.
1.Used Disk Utility once I booted in Safe Mode.
2.I used Diskwarrior to rebuild the "directory". Is that correct term?
Can someone plz coach me correctly using DiskWarrior to prevent HD problems.I installed the software but I would really like to use it correctly.
Thanks
Chuck S
iBook G4 Mac OS X (10.4.6)

"Just use it!" DiskWarrior is a great program which does its own thing very well and safely. Macs have an invisible "directory" file which the operating system itself (OS 8.x, 9.x, X v. 10.x.x, etc.) uses for itself to keep track of where it puts every bit of information stored on your hard drive, as a "file" is not stored in one contiguous space necessarily (like a single can on a pantry shelf) but pieces of the file are poked into the convenient spaces wherever on your hard drive. Because it gets changed so often by the operating system, the directory file itself can get fragmented and/or write-errors can occur to it, such that it becomes less than 100% reliable as a road map for your OS. Hence, DiskWarrior. In a couple minutes or so, DW collects all the information to create a brand new directory file, writes it unfragmented to your hard drive, and then erases your old fragmented directory file. (You can also run the "graph" function to see how fragmented is your directory file at any given time. I personally keep my fragmentation level at below 1-2% by running DW whenever it is over that. Consequently, I have not had crashes (as opposed to things freezing up for lack of sufficient memory requiring simply a restart) which are damaging since getting DW years ago.)
Should you ever have a catastrophic problem nonetheless, do not try to use your own computer, as the directory file may get further damaged. Alsoft's tech support is very good about helping using DiskWarrior under such circumstances, so contact them by telephone, or email from a different computer.
You might want to make a backup copy of your DW disk and use it routinely to keep your original disk pristine. When you run DW, you should/must boot up your computer using the DW CD and use the program on the CD. DW cannot rebuild the directory of an active system hard drive (as obviously, the active system's hard drive's directory file is the one needing rebuilding and it itself would be trying to rebuild itself if it were also the boot drive!)
PM9600/233 (OS 8.6); PM9600/G4 (OS 9.1); Perform 6320 (OS 8.1); MacPlus-OS 6.0.8 Mac OS 8.6 or Earlier

Folder causing crash - Help please!

Hi i am on a Mac Pro 2 x 2 GHz Duel-Core Intel Xeon
6GB 667Mhz DDR2 FB-DIMM
im in an office with some other macs and one or two pc's
we have a 'Guest Share' Raid drive which we share files on and we publish magazines
Anywya deadlines looming and i was busy editing photos in photoshop, my colleague was shutting down her computer (dno idea if that is relevent but just incase) when photoshop seemed to freeze, i force quit, and discovered the folder for the new issue of the magazine containing all the files, photos etc seemed to be causing problems, whether i browsed there from photoshop or just clicked on the folder in finder whatever i was using would crash, finder simply crashed and restarted immediatley
Any ideas? tried restarting both comps, and i tried just copying the folder onto my desktop by dragging it so the click did not try to load it's contents, which worked but the copyed folder is no better, still cant open it without crashes.
panic stations!!!

Sorry perhaps i should have stated this in my post but on that mac i am infact running 10.4.X as the profile specification is my home computer and i am requesting help with my office computer. can this be moved back please?

Move icon causes crash - help please

Hi Folks-
New ipad, new problem - first issue in ages that didn't fix with a simple reboot.
If I tap and hold ANY icon and move it to another place on the ipad, when I hit the home button to turn off the "jiggles" it crashes my ipad.
It's an ipad 4 - all up to date and I've tried the shut down with power button and also the restart with power + home button until the apple logo appears to try to sort this out.
Any thoughts would be great.
Thanks
Tom

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

Filters/transitions cause crashing - help!

Does anyone know why every time I try to apply a transition/filter it previews as garbled nonsense then, if I try to apply it, it crashes iM6HD? I do mean EVERY time - this is not an exaggeration.
I actually can't believe that I have paid for this piece of software: it just DOESN'T WORK. I'm seriously thinking of giving up the hardware; I can't justify it as mere home decor - it has to work!
Grateful for any insight....
Ted

Hi again Karl, Sue,
In answer to you question/suggestion, the project is around 80 minutes/17.5 GB but that's close to the remaining free space on my internal storage, hence using the external LaCie.
I haven't installed any plug-ins for iMovie or for QT, so as far as I know I'm running them both clean.
The only other possible factor is that I'm running a LaCie 20" screen at 1600x1200 off the PowerBook (but not using its screen).
Looking forward to some more possibilities!
Cheers,
Ted

S10 Change from Vista 64-bit to Vista 32-bit

Hi from Vienna,
today I got my new Thinkstation S10 with Vista 64-bit. Is it possible to change to Vista 32-bit, cause I have some programs without driver support for Vista 64-bit.
Thanks from Vienna
Leon

can you mention the programs you are having problem with may be there may be some resources where you can find solutions
also are you using any 32 bit programs in your vista now?did you check out the "X86" folder in windows folder you can install 32bit programs into that folder check this out and reply
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

"Fixes a bug that could occasionally cause a home screen crash"

After updating to 7.1 still I am facing the issue "Fixes a bug that could occasionally cause a home screen crash". Is any one facing the same?

tl;dr version: it's glitchy and slow, it freezes and lags especially when typing, it isn't a hardware problem, and it's awful.

Barn doors transition causes crash

Dear Community,
Applied barn doors transition to a project in CS4. Stored that project in 2010.
Opened the project in CS6 CC - and barn doors caused crashes - so I cleaned off the old and applied replacement barn door transitions in CS6 CC.
Once the wipe is applied - its fairly stable - sometime crashes sometimes doesn't.
If I apply a broder colour to the wipe - all ok.
If I then apply a border thickness - crash every time.
System;
Premiere Pro CS6 - 6.0.3 (001 (MC: 264587)) through cloud membership
Updated and current
Win 7 Pro - SP1 - 64 Bit
Source footage SONY EX3 - .mp4 and still image .png's
No error messages - just crash and need to restart PP CS6
Try to apply colour and border to a barn door transition causes the error
This worked before on the smae project when created in CS4
Not running other software at the time
NewBlueFX modules installed but not applied to this area of sequence
i7 - 3.20GHz, 16GB RAM, SSD OS drive, 4 x drive RAID on LSI RAID card, - No I/O hardware
I am using Are you using Mercury Playback Engine Acceleration and CUDA
Problem occurs during normal edit - as soon as I start to adjust the barn doors wipe - I don't get to compression
Thanks
Dave

Doies it help anyone that I just received this from the email address; [email protected];
Hello,
You have received this email because the content you posted below has been rejected by our moderators.
Re: Barn doors transition causes crash
posted Jun 5, 2013 5:15 PM
Since the original report earlier today - I now just have to put the timeline scrubber over the barn doors transition and PP CS6 closes without an error message and without saving. The unfortunate part here is there doesn't seem to be any record or log of the crashes to be able to disseminate whats going wrong.
Barn doors worked in CS4 - and the only change in this project is the re-opening in CS6 CC."
Question; Did I put something in there that was defammatory, rude, obnoxious, incorrect or un-helpful?
If anyone here believes I did, I sincerely apologise for the need of moderators to have intervened... and for causing any offence.

Bug report: Energy Manager causes slow performance...

Very slow Windows Startup..
Energy Manager's plans and the problem occured using any plan as I remember, and it wasn't an issue with the maximum processor state. I had heavy disk usage, especially access to the Page File, which is what the person in the second link I posted also described. CPU usage was low. The disk usage was seemingly not related to Energy Manager (Chrome was usually the worst), but removing Energy Manager completely resolved the problem. If you would find it helpful. I'm quite confident that even with Maximum Processor state at %100, CPU usage was low when it was slow, and that disk access was the culprit.
previously have use 1.0.0.31 or 32 not sure.
Windows 8.1
Im using Lenovo Energy Management Driver
1.0.0.28
4.6.2014

I actually have the same problem. Sorry to work on a old thread, but...
I've got my Lenovo B50-70 less than 1 month ago, and had switched it to SSD and had set everything up and is working perfectly. However there are a bunch of lenovo programs that came pre-installed. This computer is used mainly for work and I really don't like programs that suddenly pop-up and ask you to do stuff, as it is quite distracting, and with Lenovo Energy Manager being one of them so I removed it. (I did do some research before I remove...)
Everything was fine, until when I try to switch on my wifi (I usually have it off, as I use LAN most of the time)... For the B50-70 there is a airplane button on F7, which allow the user to switch wifi and bluetooth on/off. That button was unresponsive... After some digging it is actually related to the power energy manager being removed. So I've downloaded the latest version from Lenovo and it was working again...
However though, whenever I start my computer it is taking so long to start... And I tried uninstalling the power energy manager and it solved the problem... And I am stuck with either having no wifi on/off ability or a really slow boot, which loses the whole purpose of the SSD. After you enter your username and password it originally takes around 5~10 seconds to login, now it takes over 1 minute.
I have found this other link, which says Lenovo Power Manager having the same problem.
https://forums.lenovo.com/t5/ThinkVantage-Technologies/Bug-report-Power-Manager-causes-slow-performa...
There is a solution, which you can change the registry to switch a function off. I've tried it and it didn't work, which is not surprising as it's a different program.. But I am hoping that Lenovo can provide a similar solution for Lenovo Energy Manager...

Volume controls of my A305-S6858 causes crashes

I have a Satellite A305-S6858. Recently, it seems like almost every time I try to change the volume, explorer decides to crash repeatedly until I reboot the machine. It doesn't matter if I use the volume wheel on the front of the notebook or the slider from the taskbar's volume menu. Why is this happening, or if you don't know exactly why, how do I pinpoint the cause of this and go about fixing it?
Thanks in advance for the help.
Solved!
Go to Solution.

Satellite A305-S6858
Wouldn't hurt to try reinstalling the sound driver.
Realtek Audio Driver for Windows Vista
-Jerry

Are bug fixes the same as crash fixes?

Are bug fixes the same as crash fixes? Or are they totally different?

Depends on the cause of a crash. If it is caused by a known bug or design flaw, then yes I supose you could say that. But strictly speaking, no. A "crash" is a symptom, not a bug.
If you post whatever issues you are seeing, someone may be able to assist.

MS 2.1 'Does not support importing files containing tempo changes' message

OK, so I've just loaded up the 2.1 upgrade and opened up a couple of existing concerts, and I get the following message:
+File contains tempo changes+
+One or more of the files you are importing contains tempo change markers. This version of mainstage does not support importing files with tempo changes.+
It's a bit of a problem as the dialogue box appears several times during loading, and I have to click 'OK' every time, which adds to the length of time it takes to load up the concert (something I do several times during the course of my set).
I'm not using any MIDI stuff, just acoustic and electric guitar plus vocal channel strips and playback channels.
I've tried out some of my backing tracks, which have a ralletando at the back end, and they still seem to slow down properly (which isn't surprising, as they are audio files), and I've also tried setting all the sets back to the concert tempo, which hasn't stopped the issue occurring.
Any thoughts, anyone?

Hi Blueberry
Well, if you mean I put a tempo curve at the end of some of my audio files in Logic, in order to slow down at the end of the song, then, yes, I did do that. However, that still works in MS2.1, and anyway, why would that no longer be allowed, as that is an essential musical function. Also, if the upgrade meant I had to re-do the exporting nearly 200 backing tracks, them I'm afraid it would be back to 2.01 for me.
Furthermore, I tried starting MS up in 32 bit, and that didn't make any difference either.
As it is, this problem is (so far) only an inconvenience as it takes longer for me to load a new concert. What I'd like to understand is what does it refer to? and how can I prevent it showing this message?
Thanks

BUG: Renaming a file causes Finder to restart - after Update 2008-008

BUG: Renaming a file causes Finder to restart. This started occurring after installation of the Security Update 2008-008. I can't rename files or folders.
Is there a solution? A workaround? A software update? I repaired permissions but that didn't help.

Here's an excerpt of the crash dump referenced in the Console utility application.
Crash report written to: /Library/Logs/CrashReporter/Finder.crash.log
The first few lines shows that LockRenameUnicode is called when renaming the file, then the Finder crashes. What is causing this crash in Finder in Mac OS X 10.4.11 after installing the Security Update 2008-008?
0 com.apple.CoreGraphics 0x9f9036fc RGBAfmarkbitmapmask + 8440
1 <<00000000>> 0x0421e1ec 0 + 69329388
2 com.apple.DesktopServices 0x90a520f4 LockRenameUnicode(FSRef const&, unsigned long, unsigned short const*, unsigned long, FSRef*) + 84
3 com.apple.DesktopServices 0x90a4d890 THFSPlusRef::SetName(unsigned long, unsigned short const*, bool) + 200
Host Name: owl
Date/Time: 2008-12-18 02:24:16.661 -0800
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
Command: Finder
Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Parent: WindowServer [63]
Version: 10.4.7 (10.4.7)
Build Version: 1
Project Name: Finder_FE
Source Version: 5292900
PID: 857
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
Thread 0 Crashed:
0 com.apple.CoreGraphics 0x9f9036fc RGBAfmarkbitmapmask + 8440
1 <<00000000>> 0x0421e1ec 0 + 69329388
2 com.apple.DesktopServices 0x90a520f4 LockRenameUnicode(FSRef const&, unsigned long, unsigned short const*, unsigned long, FSRef*) + 84
3 com.apple.DesktopServices 0x90a4d890 THFSPlusRef::SetName(unsigned long, unsigned short const*, bool) + 200
4 com.apple.DesktopServices 0x90a3bb28 THFSPlusStore::SetName(TPropertyReference const&, bool) + 244
5 com.apple.DesktopServices 0x90a0e664 THFSPlusStore::SetProperty(unsigned long, TPropertyReference const&, bool) + 140
6 com.apple.DesktopServices 0x90a42768 TNode::SetName(TPropertyReference const&) const + 60
7 com.apple.DesktopServices 0x90a19468 TNode::SetProperty(unsigned long, TPropertyReference const&) const + 56
8 com.apple.DesktopServices 0x90a193b0 SetNodeProperty(OpaqueNodeRef const*, unsigned long, TPropertyReference const&) + 148
9 com.apple.DesktopServices 0x90a48550 SetNodePropertyAsStringNew + 52
10 com.apple.finder 0x000aa4b0 0x1000 + 693424
11 com.apple.finder 0x00094cdc 0x1000 + 605404
12 com.apple.finder 0x0015707c 0x1000 + 1400956
13 com.apple.finder 0x001579c0 0x1000 + 1403328
14 com.apple.finder 0x0000ecac 0x1000 + 56492
15 com.apple.finder 0x0000eba8 0x1000 + 56232
16 com.apple.HIToolbox 0x932af934 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
17 com.apple.HIToolbox 0x932af08c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
18 com.apple.HIToolbox 0x932b5e90 SendEventToEventTarget + 40
19 com.apple.finder 0x001574a0 0x1000 + 1402016
20 com.apple.finder 0x00058388 0x1000 + 357256
21 com.apple.finder 0x00087d20 0x1000 + 552224
22 com.apple.finder 0x0006f4fc 0x1000 + 451836
23 com.apple.HIToolbox 0x933a994c TBrowser::GetClientData(unsigned long, unsigned long, void*, bool) const + 176
24 com.apple.HIToolbox 0x9348b324 TTableCell::PrepEditText(bool) const + 2988
25 com.apple.HIToolbox 0x933a2c38 TTableView::CancelEditSession(bool) + 120
26 com.apple.HIToolbox 0x9347e4f0 TBrowser::KeyFilterProc(OpaqueControlRef*, short*, short*, unsigned short*) + 160
27 com.apple.HIToolbox 0x933e4e58 InvokeControlKeyFilterUPP + 24
28 com.apple.HIToolbox 0x93472e00 TextInputFilter(ShrinkToFitEditFieldGlobals*, OpaqueEventRef*) + 148
29 com.apple.HIToolbox 0x93473200 TextInputHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 404
30 com.apple.HIToolbox 0x932af934 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
31 com.apple.HIToolbox 0x932af08c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
32 com.apple.HIToolbox 0x932b5e90 SendEventToEventTarget + 40
33 com.apple.HIToolbox 0x933c4224 HandleTextInputEvent(OpaqueEventRef*) + 56
34 com.apple.HIToolbox 0x932b6218 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 524
35 com.apple.HIToolbox 0x932afb84 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1284
36 com.apple.HIToolbox 0x932af08c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
37 com.apple.HIToolbox 0x932b5e90 SendEventToEventTarget + 40
38 com.apple.HIToolbox 0x933c4120 SendTSMEvent + 228
39 com.apple.HIToolbox 0x933c3870 SendUnicodeTextAEToUnicodeDoc + 928
40 com.apple.HIToolbox 0x933c329c utDeliverTSMEvent + 1024
41 com.apple.HIToolbox 0x933c2e80 TSMKeyEvent + 88
42 com.apple.HIToolbox 0x93379b34 TSMProcessRawKeyEvent + 920
43 com.apple.HIToolbox 0x933795fc HandleCompatibilityKeyEvent(OpaqueEventRef*) + 308
44 com.apple.HIToolbox 0x932ac6a4 HIApplication::EventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 788
45 com.apple.HIToolbox 0x932af934 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
46 com.apple.HIToolbox 0x932af08c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
47 com.apple.HIToolbox 0x932aef08 SendEventToEventTargetWithOptions + 40
48 com.apple.HIToolbox 0x933792a4 HandleKeyboardEvent(OpaqueEventRef*, unsigned long) + 352
49 com.apple.HIToolbox 0x932b620c ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 512
50 com.apple.HIToolbox 0x932afb84 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1284
51 com.apple.HIToolbox 0x932af08c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
52 com.apple.HIToolbox 0x932b5e90 SendEventToEventTarget + 40
53 com.apple.HIToolbox 0x932f6c04 ToolboxEventDispatcher + 92
54 com.apple.HIToolbox 0x932f6b90 HLTBEventDispatcher + 16
55 com.apple.HIToolbox 0x932f5148 RunApplicationEventLoop + 148
56 com.apple.finder 0x00008960 0x1000 + 31072
57 com.apple.finder 0x00004f18 0x1000 + 16152
58 com.apple.finder 0x00069ff0 0x1000 + 430064
59 com.apple.finder 0x00069e98 0x1000 + 429720

Zen Vision M Tempo changes and skipp

I have a Zen Vision M 30GB. I just recently got a new computer with Windows Vista. Ever since I started downloading from my new computer the tracks are skipping and the tempo changes on some of the tracks. I'm hoping it's not my Zen. My thinking is that something is happening in the transfer. Anyone else have this problem or know what might be causing the skipping and tempo changes? When I've transferred from a ripped cd I didn't hear any tempo changes on the tracks when I played it back from my zen but I do here some skipping. When I transfer tracks from either Rhapsody or Windows media I get skipping and tempo changes. I'm frustrated with this. I did not have this when I was transferring from my laptop which had windows XP. I also don't seem to be able to drag and drop amy album art in the media explorer on my new computer. Is it posible this is a Windows Vista thing?

Well I went back to downloading from my laptop and the tracks I download from there play perfectly. Therefore eliminating any problem on my hard dri've on the zen vision m. It's got to be in the transfer from my new computer. Does anyone have any answers for this. Do some settings need to be changed? I have ripped cds and transfered th songs from my new computer and they skip as well when played back from my zen vision m. The songs play fine from the computer so it's not the track itself. Somethings happening in the transfer.

Tempo change bug in 64 bit - causes crash, help?

Similar Messages

Maybe you are looking for