Tengo un air port y se corta la musica al utilizarlo en el estereo por que? y como lo soluciono?

tengo un air port y se corta la musica en el estero al que lo estoy conectando y no se por que ? alguien sabe?

Hola Faisal,
Es muy probable que así sea, sin embargo, dispones de una nueva versión que debería mejorar el rendimiento, la 8.1.2.
En cualquier caso, este foro es de usuarios, no de empleados de Apple. Si quieres que Apple tome nota de lo que dices, comenta en https://www.apple.com/feedback/iphone.html

Similar Messages

  • HT4145 is it possible to use a sngle air port express both for streaming music to an audio system AND as a wireless base station

    is it possible to use a single air port express both for streaming music to an audio system AND as a wireless base station

    Yes you can - if it is your only router or it is after another Apple router - if you have a non-Apple router then it would have to be hard wired to create its' own wireless network.

  • No tengo la opcion de compartir internet en mi iPad Mini Retina con iOS 8. Por que esto?

    No tengo la opcion de compartir internet en mi iPad Mini Retina iOS 8. Por que esto?
    Message was edited by: lavarito

    Probablemente un problema de hardware. Creo que es hora de llevarlo a la tienda de Apple más cercano. Podría haber un cambio suelto o mal connecters.

  • Back up iphone to air port utility

    Is it possible to back up iphone 5s ios 8.1.2 to be backed up on air port time capsule, if yes how?

    Is it possible to back up iphone 5s ios 8.1.2 to be backed up on air port time capsule
    Not exactly, since iOS devices back up to either iTunes on your computer or to iCloud....depending on how you have things set up.
    If the iPhone backs up to iTunes.....AND.....you have Time Machine set up to backup your Mac to the Time Capsule, then the iPhone backup data in iTunes is backed up to the Time Capsule.  So, you could say that an iPhone.....or any other iOS device.....can back up indirectly to the Time Capsule.
    If you are asking if the iPhone can back up directly to the Time Capsule.....the answer would be no.
    For more information on iOS backups, please see this Apple support document for all the details:
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support

  • What do I need to connect my new Yamaha RX-V671 receiver wirelessly to my Air Port Express?

    I have just received my new Yamaha RX-V671 receiver and the only connection I have for the internet is by a network cable or by a USB slot.  I would like to hook this up wirelessly to my Air Port Express, I just need to know what I need to get so I can stream my itunes to this receiver.  My receive is roughly about 50 feet from my Air Port Express. 

    but what I was hoping to do is hook up my receiver wirelessly
    Sorry, but if the receiver only has an Ethernet connection or USB...as you say....then you are going to have to use some kind of wireless-to-Ethernet adapter....like the AirPort Express that I suggested....or another similar product to accomplish your goal of providing a network connection to the receiver.
    It would be wireless from your "main" AirPort Express to the second AirPort Express, with a short Ethernet cable from the second Express to the receiver.

  • How can I use my IPAD to stream Musik to two Air Port Clients in a network at the same time?

    I want to stream my musik via I PAD to more than one Air Port Clients at the same time. Via MAC it is possible to select "more speaker". In the I PAD I can only select Station 1 or Station 2.

    I opened Airport Utility today and it appears to have been simplified to the point where you can't do much with it these days.
    Yes, welcome to the Fisher Price toy box utility.. where nothing in the way of advanced usage is offered.
    Is there a way to accomplish what I want to do that is reasonably simple?
    You can put time controls onto the offending addresses.
    But if the hackers know anything at all they know how to access the MAC address of the computer and change it.. so the effectiveness of this is limited.
    Change the current setup and password.. You must use WPA2 Personal and I recommend you use a pure alphanumeric password, mix case and numbers of 20 characters or more for your situation.. do not give that password to anyone.. protect the admin password of the TC itself equally well but with a different password. And protect the physical access to the TC from anyone in your home.. because the fact is all security on the TC is an illusion if the TC has open access.
    See how to find passwords here.
    i forgot my password for my router, how can I change them.
    So anyone can discover your passwords without your knowledge and leave no trace on your system.
    If you make no progress.. I suggest replacement of the TC as the main router of your network.. you need something with controls.. and even better controls that allow you to block people.
    The favourite one now is older Netgear WNDR3800 . .you might need to buy from ebay although a few new ones are still around.. alternatively the WNDRMACv2 is simply the same hardware in a white box.. instead of black.
    Load gargoyle firmware onto it.. sorry if I even point to where you can find this info my post will be deleted.. I can say it.. just cannot help further.. so use google.. there are lots of posts and let me assure you this get combo.
    You can continue to use TC at what it does best.. a dumb wireless AP and location for TM backups.

  • Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet.

    Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks

    I did not say it is not possible.
    I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
    Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
    Maybe you can get on the Internet over Ethernet.
    You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac).

  • Time capsule 1st generation - extension with air port extreme

    My parents use a time capsule (1st generation) as wireless lan device. As they run a boarding house they wish to provide free internet access to all of their guests (in all rooms). Therefore I bought an air port extreme station to extend the network as this product now (finally) includes the option »guest network«.
    The question is the following: *Should I keep the time capsule as basic device connected to the modem and use the air port extreme as extension or do you recommend to set it up vice versa?*
    I checked the range of the time capsule: It can be used in already in the first floor but not in the second anymore.
    I am really unsure how I should approach this topic and I hope more expirienced users can provide some help to this issue. Maybe you can also give me some security advice. In order to protect kids from misusing this new possiblity I was thinking of using opendns to block certain websites. Maybe there are also betters ways of doing this?

    Need a bit more info.
    Now this is what happens when I plug it in:
    Plug it into power?? The main router?? Sorry I am unclear what you are plugging it into.
    It sounds like you have not done the setup.
    The TC should be in bridge and plugged into the current modem router you have.. and powered on full time.
    If you cannot access it via the utility, I strongly suggest you buy the apple usb to ethernet dongle.. which helps air people no end.. or use any other computer that has a real ethernet port.
    Otherwise set to factory and start over. (this will not do anything to what you already have on the disk).
    Hold in reset and power on the TC.. wait about 10sec until the front led rapidly flashes. .then you can connect the computer.. and do the setup.. choose bridge in the Network section of the utility and update the TC.
    Then you can plug it into the main router and access it and internet at the same time.. either by TC wireless or the main modem wireless.
    Please note. .Gen1 TC is only going to last very little time.. it is already well past the average lifespan.. many died at 2years.. most gone by 4years.. plan on storing nothing important on it.

  • While using the computer the wi fi dropped out and it can longer find any networks. I have played around with the air port etc , still have no networks and can't connect to internet. Please help

    Hi I am having Wi fi connectivity issues , while using my computer the wi fi dropped out , I can no longer connect and no networks come up. I have tried looking into the air port, trying manually to connect to the desired network with no success , it says the Wi fi is turned on. I am at a loss to why it will no longer connect, please if you have any suggestions,as I tried to ring apple support but my warranty has expired this is my first major issue since I purchased it in 2009.
    Thanks

    My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again... 

  • I bought a new router and now my mac can no longer find my air port express

    I recently installed a new Netgear N600 router.  The internet and wireless are working.  I had previously purchased an Airport Express for use simply as Air Tunes and used it with our old router with no problems.  However, since we installed the new router the Air Port utility cannot find the Airport Express.  I have reset the settings on the Airport by pushing the little button.
    I have tried connecting using an ethernet and Airport Utility still cannot find the express.
    Any suggestions or help would be greatly appreciated.  Thanks!

    I would suggest that you start by performing a "factory default" reset on the AirPort Express Base Station (AX). Once completed, you should be able to access the AX via the AirPort Utility. Note: Be sure to first connect to the AX's wireless network BEFORE accessing it with the utility.

  • I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How?

    I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How to reconfigure.
    I ask because I have music running out of both expresses, and the one that is most distant from the time capsule (routed through the first express) regularly drops the music signal from itunes. And I am guessing the serial configuration of the routers has something to do with this, but my root problem is music dropout - any thoughts would be appreciated.

    If you have the the most current model of the Express devices, the default setup is to "extend" the wireless signal.  In this type of setup, each Express communicates directly to the Time Capsule.
    How did you setup the AirPort Express devices?
    What version of the Mac operating system are you using on your MacBook?   Or, do you have AirPort Utility installed on your iPad?

  • Myairport utility can no longer find my time machine or Air port express

    can any one help my airport utility can no longer find my time machine or Air port express

    Try connecting an Ethernet cable from your Mac to the Time Capsule to see if that allows AirPort Utility to "see" it.
    By the way, don't confuse "Time Machine",backup software included with OS X since version 10.5, with "Time Capsule", an Apple Wi-Fi base station with an integrated disk drive.

  • I just bought a new iMac and I am using a apple air port router.  How do I connect mt windows PC to the air port router do I can move files

    I Just purchased a 21.5 iMac and connected it to the Internet using a apple air port router.  How do I connect my windows PC to my air port router so I can transfer files.

    It makes life easier to install the airport utility for windows.. which has a couple of different apps in it.. if you airport is new type then the utility is too old.. but is still valuable for Bonjour which provides network information for shared devices in the apple world to windows.. and a disk access agent..
    It will also help the Apple computer access shared directory in the windows computer.. nowadays this is pretty easy.

  • Can I use the new Air port extreme to scan, print, and share a hard drive?

    I currently have a canon 3and1 pixma MP750 printer, and a lacie brick 250gb usb external drive. I'm looking into buying a airport extreme "n" base station and a apple tv to share all my music on my home theater. I'm also planning on updating my current system to an Imac 17" intel duo 2.18g. My question is will I be able to use the scan function on my printer with the air port extreme, or is there away to connect multiple computers to 1 printer? (ie emac directly to printer and airport extreme directly to printer via some product I may not know of) And do you for see any problems sharing the HD drive between the emac, a new imac and a windows based pc with xp operating system if connected throught the airport via usb hub to acomidate the printer as well as the HD?
    Emac G4 1gig   Mac OS X (10.4.1)   Shopping for new mac

    My question is will I be able to use the scan function on my printer with the air port extreme
    Unfortunately, no. The new AirPort Extreme Base Station, like all other AirPort Base Stations, do not support the scan or copy features of "all-in-one" printers attached to their USB ports. This is primarily due to the fact that these features require two-way communications which the USB port does not support.
    is there away to connect multiple computers to 1 printer?
    Yes, if the printer is Ethernet-enabled, you can connect it to one of the AEBS's LAN ports...or use a Wireless Ethernet Bridge, like the Linksys WET54G to connect the printer wirelessly to the AEBS.
    And do you for see any problems sharing the HD drive between the emac, a new imac and a windows based pc with xp operating system if connected throught the airport via usb hub to acomidate the printer as well as the HD?
    No, the new AEBS should support this.

  • MacBook not showing external hard drive connected to Air Port Extreme

    I have a MacBook 5.2 running Mac OS X Version 10.5.7. I am running a wireless network Air Port Extreme router Version 7.4.2. I have connected a 1 TB Western Digital 10EAVS External hard drive and a printer to the Air Port Extreme router via a USB 2 hub. My MacBook sees and I am able to utilize the printer, but the Western Digital 1 TB External drive does not show up. I can see the 1 TB External drive via the Air Port Application setup, but it is not showing up on my desktop or in Utilities/Disk Utilities. I have connected the External drive directly to the USB port on my MacBook, and the drive showed up on my desktop instantly. I partitioned the External drive into two partitions and ran Time Machine which successfully backed up my MacBook. I then disconnected the External hard drive from my MacBook and reconnected it to another USB port in the hub connected to the Air Port Extreme. Once again, my MacBook does not see the External hard drive. I can see the External hard drive via the Air Port Extreme application right down to the two individual partitions. I even removed the USB hub and plugged the External hard drive directly into the Air Port Extreme router, but my MacBook still did not see the hard drive. I've restored version 7.4 and 7.4.1 on the Air Port Extreme, but it did not help. Does anyone have any insight what settings might need to be changed on my MacBook to allow it to connect to the External hard drive while it is plugged into the Air Port Extreme wireless router?

    Do you have an older "dome" style AEBS or the rectangular model? The former will not work with TM. Early versions of the former may not work until you enable them to see a TM drive by doing the following:
    Open the Terminal application in your Utilities folder. At the prompt paste the following command and press RETURN:
    defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
    The drive should now be accessible via TM.

Maybe you are looking for