Terminal Services (TS) or Remote Desktop Services (RDS) scenario clarifications

Dear Support,
Question:
Do I still need to purchase RDS CALS license? or can use MSDN CALs in the Terminal Server?
Due to MSDN subscribers are End users, do not use Production Data and have to demo their developed applications to other End users group.
Scenario:
1. Use only Remote Desktop Session.
2. End users are MSDN Subscribers.  (Although stated by Microsoft End users are non MSDN subscribers)
3. End users demo applications to End users.
4. End users develop their applications and have to demo to other End users group.
From MSDN link:
Client Access Licenses for Terminal Services
With an MSDN subscription, you are allowed to provide end users access to Internet demonstrations of your programs via Terminal Services (Windows Server 2003 or Windows Server 2008) or Remote Desktop Services (Windows Server 2008 R2). Up to 200 anonymous
users can simultaneously access your demonstration this way. Your demonstration must not use production data. MSDN subscribers are licensed to demonstrate their applications to end users,
but Terminal Services (TS) or Remote Desktop Services (RDS) is the only scenario where end users without an MSDN subscription can interact with the demonstration application while the software is licensed through MSDN subscriptions.
Accessing CALs            
MSDN subscribers can access CALs for demonstration purposes through the
Product keys page of MSDN Subscriber Downloads. Please access the documentation resources online for assistance with the
Terminal Server activation process. If you have any questions, please visit the Microsoft
Terminal Services forum.
Mary Lee

Hi
Please call the licensing to be sure. In the USA (866) 230-0560 or
[email protected]
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Similar Messages

  • Remote Desktop Services error

    We have a user that uses a new mac book air to connect to our terminal servers using the remote desktop services feature in Windows Server 2008 R2.  She is using the standard Rdesktop client supplied by Microsoft.
    While she is working sometimes the rDesktop session closes without reason.  With other people on a different profile this doesnt happen.
    Any ideas what I could check and where to check? or is this a common issue?

    Hi,
    I do not have such issue in my experience. Please check the log file for further research.
    Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Audio service hangs on Windows Server 2008R2 with Remote Desktop Services

    Hello! 
    I have some terminal servers on Windows Server 2008R2. Users have the ability to use web browsers (IE, Firefox) with the included Flash Player, IM clients / Internet
    telephony (Skype, ICQ), Windows Media Player, Office, and a specific internal software (works with MS SQL). I have the following problem: the Windows audio service hangs up that leads to hangup of all programs which use it, such as: any sites in Internet with
    a flash content (in all browsers), ICQ, Skype.Even logging out the session hung when tried to lose a sound. It's impossible to stop or restart service from the services.msc the service just hang with status "restarting". To stop service I terminate svchost
    process. As soon as the audio service is stopped - all programs start to work correctly (certainly without a sound). This problem appeared not suddenly - periodic hangups of programs on servers were marked long ago (more than half a year), but not directly
    were connected to audio service, especially there were they rather rare (on the average once a week - two) and were corrected by server reset. The error message: 
    Error container , type 0 
    Event name: AppHangXProcB1 
    Reply: No data 
    Ident CAB: 0 
    Problem signature: 
    P1: iexplore.exe 
    P2: 9.0.8112.16446 
    P3: 4fb57c8f 
    P4: 77c1 
    P5: 131200 
    P6: svchost.exe:AudioClientRpc 
    P7: 0.0.0.0 
    P8: 
    P9: 
    P10: 
    shall suggest an idea about a sound service, but in Event Viewer has no Windows Audio events. 
    Recently I updated Skype to the last version 6.0.66.120. Before was 4.2.35.155 because versions 5хх on Windows2008R2 with the Remote Desctop Services actually don't
    work, if users at the server more than one or two. We checked the sixth version by the test machine with the terminal environment and very were delighted to its normal working capacity. However after installation of this client on production servers it appeared
    that hangups of programs on servers began to occur on the average time at an o'clock in case of an average daily load (about 20 users on one server). If you have worked one or two users, problems weren't watched. Internet search led me to the support page
    Skype, where the Windows 7 x64 user faced a similar problem in the fifth version of the program. But the solutions proposed by the support team does not help me. In addition, I found the advice to disable enhancements in the properties of the playback device,
    but it is impossible for the "Remote Audio" device. 
    At the moment, on servers where I updated the Skype, I disabled the audio service. If within a reasonable time, I do not find a solution, I will have to revert
    to an older version of Skype, but I would like to solve the problem completely. 

    Enable the Allow audio and video playback redirection Group Policy setting
    To allow audio and video playback when connecting to a computer running Windows Server 2008 R2, you must enable the Allow audio and video playback redirection Group Policy setting. The Allow audio and video playback redirection Group Policy setting is located
    in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection and can be configured by using either Local Group Policy Editor or the Group Policy Management
    Console (GPMC).
    For more information about Group Policy settings for Remote Desktop Services, see the Remote Desktop Services Technical Reference (http://go.microsoft.com/fwlink/?LinkId=138134).
    Is this policy applied? Refer:
    http://technet.microsoft.com/en-us/library/dd759165.aspx
    Also, have you tried update the audio device driver for this terminal server?

  • Options for deployment via Remote Desktop Services / Terminal Server

    Currently we have volume licenses for CS which is deployed via remote desktop services in a multi-server load balanced farm.
    When reaching out to support, they informed me that CC cannot be deployed via RDS/terminal services.
    Seeing that CS is discontinued, how does Adobe suggest deployment of their apps via RDS/Terminal services?
    The support rep really didn't have an answer for me.
    I find it hard to believe that Adobe's going to abandon deployment of their apps in the enterprise as things are moving towards thin clients rather than traditional desktops.
    We'd like to avoid needing to go VDI instead of RDS if possible.
    I'd imagine VDI would have the same licensing issues assuming you don't want to have a dedicated VM for each user rather than having a shared pool of VMs.
    Thank You.

    The only link I have is http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent
    Otherwise, Adobe contact information - http://helpx.adobe.com/contact.html since this forum is about the "regular" Cloud

  • Error when uninstalling App-V RDS client: Product: Microsoft Application Virtualization (App-V) Client for Remote Desktop Services 5.0 Service Pack 2 x64 -- Error 1324. The folder path 'C:' contains an invalid character

    Issue:  experienced when attempting to uninstall the App-V 5.0 SP2 RDS client. 
    Event Log:  Product: Microsoft Application Virtualization (App-V) Client for Remote Desktop Services 5.0 Service Pack 2 x64 -- Error 1324. The folder
    path 'C:' contains an invalid character
    Symptoms (when in this current state): 
    Unable to uninstall the SP2 client
    You can upgrade the client (via hotfix) and uninstall the hotfix, but you will not be able to remove the SP2 client
    AppvVfs filter driver will not create an instance, therefore applications will not be able to read into existing streamed VFS content, or trigger sparse files to stream content.  (you can still stream the content via other means, like the UI or powershell)
    Because of the AppvVfs filter driver not instantiating, applications that depend on licences that exist in VFS will not be able to be read causing certain applications to react as if the license does not exist or is an incorrect format

    Resolution:
    Check for the existence of a hidden folder named %appdata% in the C:\Program Files\Microsoft Application Virtualization\Client folder.  (You will need to un-check the folder options box in windows explorer for "Hide
    protected operating system files" to see it)
    If the hidden %appdata% folder exists, delete it.
    Proceed to uninstall the App-V client
    After a clean uninstall and removal of remnants of the client, reinstall the client again and apply the latest hotfix available (Hotfix 2 for SP2 at a minimum).

  • Users not showing in Terminal Server Under Remote desktop services manager and Task Manager

    Hi All,
    I have a problem here in Terminal Server. I can not see the users logged in to Server but i know users are accessing the files and currently working.
    1. From the Task Manager-- Show processes from all users displayed all the processes accessing by users.
    2. From the Task Manager-- From Users Tab--No users list at all
    3. From the Command Prompt- Query users-- No information
    4. From the Remote desktop services Manager-- used with IP/Host name-- Still can not see the users list and processes. So i can not kill the session if needed.
    Enviroment:
    TS CALS 20 currently accessing 15 users
    VM-WARE GUEST: 2008 RS Terminal Services/Remote Desktop services installed
    Windows up to date-- Just updated last month
    Problem is here for long time. Just couldn't find the time to trouble shoot.
    UMESH DEUJA MCP,MCTS,MCSA,CCNA

    Hi,
    Thank you for posting in Windows Server Forum.
    As you have tried many steps, I suggest you to try below command line and power shell command if successful in your case. Please try below command with Admin access:
    qwinsta /server:<servername>
    To kill a session use rwinsta to delete the session specifying the ID number:
    rwinsta /server:computer01 3
    Here's the list of command line tools for Remote Desktop Or, you can use PowerShell:
    Get-RDUserSession and Disconnect-RDUser
    Please check the list of Power Shell command from
    this link.
    Hope it helps!
    Thanks,
    Dharmesh

  • [Forum FAQ] Available updates for Terminal Services/Remote Desktop Services

    The table summarizes the available hotfixes and updates for issues that can occur in Terminal Services/Remote Desktop Services.
    Terminal Services (Remote Desktop   Services) in Windows Server 2008
    KB
    2312539
    Remote Desktop Services (Terminal   Services) on Windows Server 2008 R2 SP1
    KB 2601888
    Remote Desktop Services in Windows Server   2012
    KB 2821526
    Remote Desktop Services in Windows Server   2012 R2
    KB 2933664
    Thanks for the suggestion of
    armin19.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    I'm interested in that issue as well as a lot of our Clients would like to deploy Adobe Creative Cloud apps in their Enterprise. As I'm a Citrix virtualization engineer I'd like to have an official Statement from Adobe whether or not their products can be licensed and installed on either Citrix XenDesktop (formerly XenApp) Servers and/or virtual Desktops (VDI Environment). This questions Needs answering from both a licensing as well as technical Point of view. So please Adobe, share your knowledge with us.
    Alex

  • Cannot run more than one instance of a remote app in remote desktop services Server 2012

    All,
    I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
    I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done.  We may have 12 or more students accessing and trying to run the Olyvia application
    at any one time.
    All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time.  That is, when I start up "olyvia" on a Mac, it works great.  If I leave it up and running, and then try
    and start up "olyvia" on an iPad (using different accounts), I get the following error message:
    "Cannot run more than one instance of this program simultaneously.  Either the program is already running, or it has not been terminated completely."
    I need to understand the root issue.
    1.  Is this a licensing issue?  So, I need to add some CALs to the RDS server?
    2.  Is this a application issue with "olyvia"?  So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
    3.  Did I not "publish" the application correctly?
    4.  Is this happening because I followed the "quick start" guide?
    Appreciate any help I can get on this.  We have no problem getting CALs, I just need some help with the root issue.
    Thanks,
    Geoff Weatherford
    CVMBS, CSU

    Hi Geoff,
    Each application uses different techniques for determining if multiple instances are running.  If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
    In the best case you really should direct your question to the maker of Olyvia.  The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why?  Is it related to Licensing? 
    Compatibility?  If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
    -TP

  • Install Remote Desktop Services Failed on Windows 2012 Server

    I understand RDS is not recommended on DC due to security consideration.  However since I want to play it at home, it is not much a concern.  Such scenario works fine on Windows 2008 R2.  But on Windows 2012, the RDS (session-based, have not
    tried VDI, but expect same result) installation always fails and is incomplete on DC. 
    In \Administrative Tools\Terminal Services, I only have RD Licensing Diagnoser and RD licensing manager.  The remote desktop service management service cannot be started (Error code: 0x88250001).  Is there any extra configuration needed for RDS
    working on Server 2012 DC or before the installation?  Thanks.
    Update: this issue has been solved in Windows 2012 R2 Server.  According to
    http://blogs.msdn.com/b/rds/archive/2013/07/09/what-s-new-in-remote-desktop-services-for-windows-server-2012-r2.aspx
    "Single server RDS deployment including Active Directory. We now support running our RD Connection Broker role service on the same physical instance as an Active Directory Domain Controller.  In addition, we published
    guidelines for how RD Session Host could be used without the RD Connection Broker."
    The guidelines (http://support.microsoft.com/kb/2833839/en-us) primarily apply to Windows 2012 Server.

    Asinine.  Simply Asinine.  Microsoft took it out because of $GREED$.  
    RemoteDesktop has become so popular, they had to break it to make more money.  Thats why they discontinued SmallBusinessServer.   If this practice is so tabooo... Why did MS go the opposite direction with SBS 2011 Premium Cal's?  SBS2011
    had DC, Exchange, RDS and Sharepoint,SQL, RemoteWebWorkplace, OWA all working in perfect harmony.  It is an untrue statement then, that it was "allowed but not recommended"
    Now you by Server2012 (core + two virtual) and its not enough for all this. 
    You need at least another $700 for another sever licence to have it all
    and who knows if SQL will run on a DC, or Exchange, or R-DERP server.  Another reacherous bridge to cross.
    By far, the absloute worse release since Millennium.  The product is not ready for production, we broke our rule of waiting until the first SP1 upgrade for this and Exchange 2013.  Problems with USB drivers and networking running extreamly slow. 
    Our 2003 SBS server was at least three times as fast, and this server has SAS and SSD drives running.  It can't get out of its own way, and IE10 is the most unstable piece of crap to come out of Redmond.  Open wide and swallow - Mother Microsoft
    knows whats best for you.  YOU WILL EAT OUR SLOP AND LEARN TO LIKE IT.   Server2012 AKA  "METRO-SERVER"
    Now here I sit after 50 Hours back to back setting up a new R-DERP server 2012, AD, Have my RDP licences in my hand at $100 each, and WTH does Microsoft care if I install it on my DC.  ITS MY DC.  And the cost savings versus the "risk" was
    previously MY decision. 
    Sure, I can install a couple of Virtual HyperV sessions but they are so tempremental to a power-outage in a small business its not worth it.  I have to double up my server hard drive resources, buy a $800 battery backup unit and make sure to attach
    the cable, and even then, if that Bi**H does not shut down properly, one bit goes awry in a VHD or VHDX file and you are screwed.  Restore from lastnights backup and forget about todays work.  Not to mention it will probably take a half day to try
    to fix it, then recover it then tell the 30 users they lost a days worth of work. 
    HYPER-V is for test servers and has no place in a small (micro) business environment. 5-30 users. 
    Microsoft's solution, buy another server.  Need Exchange?  Buy another server or take the risky cheapskate route and spin up some VHD's.  Might as well put a gun to your head and play russian roulette, at least you know you have a one in six
    chance of failure.  With MS, its a 100% failure for a dirty shutdown power loss, motherboard blows, memory goes corrupt in a few years, your conventional method of recovery is gone, and you have some upchucked VHD file to try to recover some of TODAYS
    data from. 
    Screw server 2012 forever. 
    I will sell 2008 and SBS2011 Premium unitl it rots in hell like XP (of which there is NOTHING wrong with for the average, WORD, EXCEL, OUTLOOK and QUICKBOOKS that all SMB's use.  Its MS $GREED$  Grab the world by the B**ls and squeeze with all
    your might to squeeze every dime you can out of *SMB* because big business is going to run thier 2003 Exchange and 2008 servers into ground before they switch to this garbage. 
    YOU CANNOT INSTALL EXCHANGE 2013 on DC , OR on R-DERP server. 
    Go buy another server license and server or MOVE TO THE CLOUD and get fleeced every month. 
    I have 30 DC/R-DERP/Exchange and SBS2011 Premium servers all running for years in perfect harmony, locked down with security so the users can't even WIGGLE with something they are not supposed to work with.  They get their apps, cannot install anything
    and all these servers are running just fine behind the firewall and perfectly save.  The track record of this combination is 100% stable and is up 24/7/365 with no problems.  Do yourself a favor and throw this 2012 into the river, you don't need
    any weights because it is LEAD and will sink to the bottom by itself.
    Why, you ask?  Official is "Its for your protection"  The real reason?  To sell you more $700 server licences.
    Maybe for SMB, we start selling Linux NAS Servers, host the Exchange in the cloud and be hearded like cattle to the Microsoft slaughterhouse.  One way or another, you are going to bleed.    A little each month to move to the cloud, or
    a small fortune if you want to have it in house.  Microsoft wants it to be more expensive to have in house.  No more buying a server and running it for six years before you upgrade.  They can't have in house servers competing with their cloud,
    and small businesses are the low hanging fruit  ripe for the pickin'. 

  • Questions in regards to server 2012R2 Remote desktop Service deployment and GPO

    Hi Everyone
    We have a business requirement moving to 2012R2 RDSH server. I have installed a 2012R2 member servers and enabled Remote desktop licensing role. I have activated the licenses. the servers is in operational
    I have deployed 3 windows 2012R2 member server "RDS1" , "RDS2" and "RDS3".
    on RDS1 I ran Add roles and Feature Wizard > Remote Desktop Services installation > Quick Start >Session based desktop deployment to complete the installation.
    On RDS1 Server Manage Dashboard Page Select Remote Desktop Services > Overview. Under RD Licensing I added my 2012R2 license server "2012r2-tslic". Go to task. Edit deployment properties RD license mode to per device and click OK.
    Reboot RDS1
    Check RD Licensing Diagnoser everything is clear
    On RDS2 I did the exact same thing ran Add roles and Feature Wizard > Remote Desktop Services installation > Quick Start >Session based desktop deployment to complete the installation. 
    But With RDS2 I move this server to an OU that link to a GPO with RD licensing details. after reboot the servers check RD Licensing Diagnoser I can see 2012r2-tslic specified as the license servers.  
    Based on this document
    http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx  Are you suppose to configure RD license server via Remote desktop Service deployment ? Not GPO ?
    Here are my questions
    We currently have ten 2008r2 terminal servers in a NLB cluster. each RDSH server have in house application installed on each one of them. User connect to the 2008R2 RDSH servers via RDP connection. we have a restricted GPO apply to those
    RDSH servers. user cannot do anything on RDSH servers apart from running the application and use excel.  On the remote desktop session host configuration we have enable settings like end a disconnected session , Active session limit  ,
    remote control users session , LPT port redirection.
    We push out RD license server detail via GPO to the terminal servers
    Can I use our existing GPO apply the licensing server settings , desktop restriction setting to the 2012R2 RDHS servers or we should be using Remote desktop Service deployment to do the job ? If that is the case how would you transfer the
    current 2008r2 environment to 2012 using Remote desktop Service deployment. is that mean I have to manually configure 1 by 1.
    Please help
    Many thanks

    Hi,
    Please see my response to you in the other thread.  Please contact me via email and I will go over the basic planning and deployment steps with you which will help clear things up and get you started off on the right foot.
    You should only run through the wizard and create a RDS deployment once.  Then you add the various servers (RDSH, RD Licensing, RD Gateway, etc), set Deployment properties, etc.
    Thanks.
    -TP

  • Intermittent Disconnects for clients of 2008 R2 Remote Desktop Services

    Hello, I have an issue that I am trying to work on for a client who is experiencing intermittent disconnected sessions when logged into a Windows 2008 R2 Remote Desktop Services (RDS) server.
    As I mentioned, the disconnect is intermittent in nature and almost appears to be network related, although I cannot find any data in the Application, System, or application specific logs to support that.
    The RDS server overall does not exhibit any error, but the user's session is briefly interrupted and then restored.  I would like to be able to gain some additional information about what is going on under the hood, but I am having trouble finding any
    details on how to turn on debug logging for Terminal Services (er, RDS) on 2008 R2.
    Can someone provide some additional details on what kind of logging or other means that I can take on this server in order to gain some additional insight?
    Thanks in advance for any advice.

    Hi,
    There are certain reason for which the client get disconnect from the server. The following are some of the commonly seen symptoms:
    • You may be limited in the number of users who can connect simultaneously to a Remote Desktop session or Remote Desktop Services session.
    • You may have a port assignment conflict.
    • You may have an incorrectly-configured Authentication and Encryption setting.
    • You may have a certificate corruption.
    More information.
    http://support.microsoft.com/kb/2477176
    If you want to have log for login\logoff for the client on server end then you can get the information from below log.
    Event Viewer>Application and Service Logs>Microsoft>Windows>TerminalServices-LocalSessionManager>Operational
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Licencing Office 365 on Remote Desktop Services

    So I am looking to move to Office 365 in the near future instead of just renewing my SA against Office standard.
    I read somewhere that in order to continue to be able to clone these installs as part of my Terminal Server rollout, I need to purchase at least on Office licence on SA.
    This is to allows access to the .ISO file and KMS licence. To keep compliant, the rest I will purchase via Office 365.
    Does that sound about right and can I use Office 365 Mid Business as the version or does it have to be Pro?

    I read somewhere that in order to continue to be able to clone these installs as part of my Terminal Server rollout, I need to purchase at least on Office licence on SA.
    This is to allows access to the .ISO file and KMS licence. To keep compliant, the rest I will purchase via Office 365.
    I'm not quite sure what do you mean by "clone these installs as part of my Terminal Serverl...". If you mean use Remote Desktop Services (RDS) to provide shared computers to users in your organization, you can use
    shared computer activation to do this.
    Please note, you have to do this with
    Office Deployment Tool. Here is the reference you'll need:
    http://blogs.technet.com/b/uspartner_ts2team/archive/2014/09/03/office-365-shared-computer-activation.aspx
    http://technet.microsoft.com/en-us/library/dn782858(v=office.15).aspx
    Office 365 has nothing to do with .ISO file and KMS licence. It uses Click-to-Run as the new installation technology, and must be activated with the Microsoft account associated with your subscription.
    Regards,
    Ethan Hua
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • How to report on sessions from Remote Desktop Services

    I want to run a historical report for (in)active / total sessons from a group of 2008 R2 servers.  I found that I had to import the RDS MP just to even get the terminal server\(in)active sessions counters visible in the performance view, and the metrics
    are being collected but I cannot figure out what object/class/counter combination to use in order to run a report from the SCOM 2012 Reporting console.  The TS 2003/2008 report templates do not work at all which were perfect from my TS 2003 farms, but
    now I can't get a birds eye view of a 2008 R2 RDS farm of 100 'terminal servers'.  What gives?
    B. Wright

    Unfortunately, I've been there and done that.  However not of the 2008R2 servers that are running "Remote Desktop Services" are available when I try to search for a group/objects in the chart/series.  If I point it to a group that contains the
    computers in question, and use any of the "terminal services 200x" counters/performance collection rules no data shows up in the report.  It's like they aren't avaliable as Windows Computers/Servers anymore because SCOM/MS considers them as a "Remote
    Desktop Services Host", and the only way I can see (in)active session information is in the performance view of that management pack's folder in the monitoring pane. 
    Seems to me that there is a major flaw in the RDS management pack for SCOM 2012.
    B. Wright

  • Remote Desktop Services Role on a Virtual Machine (VM) Requirements

    Does MS recommend installing RDS Role on Hardware or Virtual Machine? I have a use case where I have about 35 people that will be using the Internet Explorer and possibly run additional piece of software. I'm having trouble determining if the RDS Role on
    Virtual Machine will be able to sustain the load of so many users. Should the same performance metric used in hardware selection be appropriate to apply for Virtual Machines. We are using VMware on pretty powerful DELL hardware, which is also hosting
    120 existing VMs as of now. So my questions is would VM with 4 CPU's, 8GB of RAM, 80 GB Virtual Disk and 1 GBPs NIC would be handle the job?

    Hi,
    Thank you for posting in Windows Server Forum.
    There is no any particular requirement to run RDS on physical or virtual machine. But if you want to install RD Virtulization role then you need to see that Hyper- V role installed because “when the RD Virtualization Host role service is installed, Server
    Manager checks to see if Hyper-V is installed. If Hyper-V is not installed, Server Manager will install it”. And Hyper-V role cannot be installed on virtual machine so for that you need to install on Physical machine. Other all RDS role can be installed
    on virtual machine also.
    Install the Remote Desktop Virtualization Host Role Service
    In addition, please check below articles.
    1. Remote Desktop Services: Server and client requirements
    2. RDS Hardware Sizing and Capacity Planning Guidance.
    Hope it helps!
    Thanks,
    Dharmesh

  • How do I remote control a user in remote desktop services in Windows Server 2012?

    Hello,
    we currently operate in a 2008 R2 environment with the majority of clients connecting to our terminal servers.  We use the remote control feature in terminal services manager to connect to a users session when a user phones our helpdesk with
    a question / issue.
    Just today I've installed 2012 server on a hyper-v virtual machine to have a play with it.  I've installed the Remote Desktop Services and noticed this remote control feature is gone.  I can still log off or send a message to a user, but I can
    no longer remote control their session.
    I've seen one or two other posts stating this feature has been removed completely.
    So, a couple of questions:
    1. How on earth do I "shadow" or connect to a users session now?
    2. If I have to go third party to get this functionality back, what's the best software on the market for this and does it support remote connecting of users who have their RDP session span multiple monitors? (2008 R2 doesn't)
    3. Will Microsoft ever bring this feature back? as at this stage I doubt we would move to 2012.  This is the one feature that is crucial to the day-to-day running of our helpdesk.
    Cheers.

    A large percentage of our IT support business is through remote management. Most of our large enterprise customers are Terminal Server environment (now called Remote Desktop - why does Microsoft have to change EVERYTHING - how would they feel if I changed
    the colour of the sky from blue to red just because I could?).
    Last week, after much expense to the customer (and realising that there WOULD be some cosmetic headaches to contend with Server Management) we installed a new "Remote Desktop Server" for them and shifting them from 2003 - a big leap so we discovered.
    During deployment it came as a HORRIFIC surprise that we could not remote control user's sessions!
    Yes, we ARE to blame for not fully realising the cock-up Microsoft has made for us. We should have fully researched every detail of what changes they made and what they have robbed us of.
    Firstly, the removal of the ability to fully manage user's sessions came as a HUGE blow!
    The remaining multiple issues that followed (including the hugely cumbersome and SLOW way of accessing user's sessions and the false information that the console was reporting users logged in when they had already logged out) suddenly resulted in us decommissioning
    the new 2012 installation in favour of a 2008 R2 installation.
    Some may ask; Why not use "Third Party" apps to counteract the issue? Firstly; why spend MORE and why use a third party app that "is as" cumbersome to use just because of a freaking feature that Microsoft deemed a "security risk" - for G.D sake!
    We have now been directed by management to convince customers that a move to 2012 is NOT recommended - good choice boss, I love you!
    The question is; will Microsoft re-implement this feature and fix Server Management performance/accessibility in a future release before 2008 R2 is no longer available? Probably not - it looks like their stubbornness to forge ahead with their craze mind-set
    of transforming their products into something that is now annoying millions (including their bloody push towards everything-cloud which NONE of our customers want anything to do with).
    Microsoft! Get us back on to your side and take a step back, take a deep breath and listen to consumers!

Maybe you are looking for

  • Flush pending AWT events programmatically

    Hello, everybody. Is there a way to flush pending AWT events programmatically? I would like to be able to use it in a code like this: if (comp.requestFocusInWindow())     // flush pending AWT events...     KeyboardFocusManager focusManager = Keyboard

  • CS5 save as JPG slow dialog box

    I notice when I go to file=Save As and choose JPG, PS hangs for about 4 seconds and I cannot cancel or hit OK. The annoying part is that I often click twice thinking I  missed it and end up making another change to my file with whatever tool was in u

  • Accidentally burned documents in IDVD. Can they be saved?

    In an attempt to backup my files before they were moved from one Macbook to another, I had let my Mac savy sister burn my documents folder to dvd. I'm pretty new to macs, but not to computers in general. However I didn't know how to burn to a dvd. Th

  • Reports 10g with Forms 9i

    I want to use Reports Server 10g Installed on one machine from Forms Server 9i installed on other machine. Is it possible and if yes then how?

  • Why aren't certain characters allowed?

    I was trying to do a simple system.out.println with several lines. What I was trying to do was display ASCII art, but it said that some characters were not allowed. Why is this and is there a way of getting around it?