TES v6.1 Job.Insert using name or alias
hello,
The following XML work fine when I use job id 166. I tested it on http://localhost:8080/api/tes-6.0/postscreen .
<?xml version="1.0" encoding="UTF-8"?>
<entry xmlns="http://purl.org/atom/ns#">
<id>12</id>
<tes:Job.insert xmlns:tes="http://www.tidalsoftware.com/client/teservlet">
<tes:id>166</tes:id>
<tes:startdate>20130614</tes:startdate>
<tes:vars>a_parm=hello from TES v6.1,b_param=1 23 4 5</tes:vars>
<tes:deps>N</tes:deps>
</tes:Job.insert>
</entry>
How do I use job name or alias? I tried both
<tes:name>TestGroup</tes:name> and <tes:alias>TestGroup</tes:alias> but getting the error "exception:java.lang.reflect.InvocationTargetException reason: description:Could not find RPC parameter [object]..."
Please advice.
Thanks,
Bryian Tan
HI Bryian,
You have to use the jobid, the name and alias are not valid in this case.
Thanks,
Prakash
Similar Messages
-
Hi
In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
There is only one Job Server and the destinations are enabled in it
There is no Job server for Crystal Reports Job Server
Do i need to create it and how.Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.
-
The podcast "(Insert podcast name here)" could not be used because the orig
The podcast "(Insert podcast name here)" could not be used because the original file could not be found. Would you like to locate it?
I'm getting a problem with podcast going missing. I have the following…
1) Black 5th Gen iPod
2) iTunes 7.1.1
3) Windows XP Professional
4) Various video & audio podcast
5) Use of smart playlists
a) I have customized each smart playlist
This is the problem... I download and listen to a podcast, on either the iPod or iTunes. I refresh then boom, the file winds up being missing. iTunes gives me a message: "The podcast "(Insert podcast name here)" could not be used because the original file could not be found. Would you like to locate it?" The file is not in the default folder or recycle bin. Sounds like a Microsoft issue
Through the collection of tubes know as the internet I offer to you this challenge—Any Takers? Any Ideas?The podcast "(Insert podcast name here)" could not be used because the original file could not be found. Would you like to locate it?
I'm getting a problem with podcast going missing. I have the following…
1) Black 5th Gen iPod
2) iTunes 7.1.1
3) Windows XP Professional
4) Various video & audio podcast
5) Use of smart playlists
a) I have customized each smart playlist
This is the problem... I download and listen to a podcast, on either the iPod or iTunes. I refresh then boom, the file winds up being missing. iTunes gives me a message: "The podcast "(Insert podcast name here)" could not be used because the original file could not be found. Would you like to locate it?" The file is not in the default folder or recycle bin. Sounds like a Microsoft issue
Through the collection of tubes know as the internet I offer to you this challenge—Any Takers? Any Ideas? -
How do I insert the File Name? How do I update an old File Name that was previously inserted?
It's common practice to insert the document name in the footer of document, so people reading the document know what version the file was printed from. This was easily handled in the past version of Pages by going to the "Insert" menu and selecting "File Name". If you later modified a document, you could righ click on the inserted document name and the contextual menu would offer you the option to "Update File Name".
Pages 5 seems to be missing this functionality. The software help instructions offer zero mention of Insert File Name.
Has this been removed? If so, that's crazytown. If not, I'd sure appreciate being explained how to use this important feature.
Thank you!Tell Apple and Apple's users by rating/reviewing Pages 5 in the App Store.
Apple tries to clear out the bad reviews but with every new version they keep sinking lower and lower.
In the Australian M.A.S. it is getting almost 3/4 saying they don't like it, with almost 3/5ths saying they hate it. Worse than the previous v5.0.
I assume there were some who just quickly looked at it and didn't know what Apple had done. A few bad files and intractable problems later, and they are starting to wake up.
The problem with the reviews is that mostly people do it on first impressions and they can't go back and correct their review in the light of experience, until the next version comes out.
Peter -
I have created a letter and would like to personalize it in the printing process by inserting "last name" on each letter - from a numbers or CSV file that contains "last name" column.
I'm stumped. It seems it only allows me to insert fields from my address book.
So I opened up my address book and attempted to drop my file with addresses into a new directory but it wouldn't allow that kind of action.
Can someone help me? Surely this is possible?I've read that chapter, several times - and I must be blind. It always requires that I use my address book (which does not contain the names/addresses I'm currently trying to use). I don't see anywhere I can select a numbers file/column instead.
Can you point me to the area in the pages manual chapter 11 you are referring to?
As I mentioned, none of the names/addresses I am trying to use are in my address - nor do I want to add them (unless I must - and would then put them into their own directory - I tried this and failed).
I want to pull the "last name" from a numbers file and insert it into a letter, printing individual letters with "Dear Mr. <last name>, ........for 250 letters with a different name on each letter. -
Insert Page Name in Master page
Hello.
I was wondering if there was an easy way to insert the page name inside a master page, something like indesign's variable ?
If i want this exactly like the widgets (drag and drop a box, it places with editable attribute of pageitem::menu), i'm ok to type and paste some html.
(I also wonder how to use the widgets.muse file to build my own, but that's another question i guess)Thanks, this sounds like just what I'm after. However…
I feel pretty silly asking this, but I can't understand the Adobe Help files on overriding a master item.
It lists a two step process:
Make sure the master item can be overridden -this seems to be fine. After selecting the inserted File Name in the master I can see a tick next to Allow Master Item Overrides On Selection in the Pages panel menu.
Override specific master items on a document page - this is where I get lost.
Firstly I can't select the items on a regular (non-master) page. Am I meant to select them on the master page?
Secondly the help file simply says "Change the selected master items as desired." How do I change them. There's no explicit instruction, and I can't for the life of me work it out.
More generally (if this does happen on a master), do I need to make this change on every document in the book, or can I simply make the change on the Style Source and then synchronise the remaining files? -
When I am trying to assign a job to my name, i am getting an error.
Hi,
In R12, when I am trying to assign a job to my name, i am getting an error(APP-PER-07510: You cannot continue, Future changes exist).
my user was end dated. i deleted that end date and trying to working on that, i can create a new user and will work on that user also but that problem is, we have my company unique id , based on that only user should be created.so, what ever i have user id, it had been created and i dont have any scope to create new user.
simply to say i have to user my end dated user only, how can i use it in feature also.
Please help me to come out form this situation.
Thanks,
Ram.Are you using "Shared" HR? You can refer to note >1074384.6 on Metalink for a resolution to this issue. If you are using the full install of HR then refer to note > 786785.1 on Metalink
Edited by: pillair on Jun 12, 2012 9:03 PM -
How to get Name 2 also when we search for a customer using 'Name' as search
In XD03, when I am searching for Customer using Name as Search term I am getting postal code, Name1, City, Customer no. I want Name2 also to be displayed. Can somebody please suggest.
Thank you.hi,
for this you will have to change the search term involved during the master data creation.
now during the creation of customer master data , enter the name as the search term in the data base.
if possible change the database of customers and insert the name in the search term.
without it, it will be really difficult to locate the customers with the search term as their name
regards,
Siddharth. -
In pages 09, you can insert file name (Insert menu), e.g. into a header so that if you have hard copy, you know what file is called.
Gone, with well over 100 other features.
You should still have Pages '09 in your Applications/iWork folder, use that and rate/review Pages 5.5.2 in the App Store.
Peter -
what does this last statement mean? it is as though the query runs just like without any hints.
oracle doc:
Using Parallel Execution
Examples of Distributed Transaction Parallelization
This section contains several examples of distributed transaction processing.
Example 1 Distributed Transaction Parallelization
In this example, the DML statement queries a remote object:
INSERT /* APPEND PARALLEL (t3,2) */ INTO t3 SELECT * FROM t4@dblink;
The query operation is executed serially without notification because it references a remote object.Randolf,
As far as I have a real db link why not test it myself (see my questions at the end of this thread)
SQL> insert /*+ append parallel(lcl) */ into local_tab lcl select /*+ parralel(dst) */ dst.* from distant_tab dst;
51 rows created.
SQL> select * from table(dbms_xplan.display_cursor);
PLAN_TABLE_OUTPUT
SQL_ID 1nhmuzb4ayq7x, child number 0
insert /*+ append parallel(lcl) */ into local_tab lcl select /*+
parralel(dst) */ dst.* from distant_tab dst
Plan hash value: 2098243032
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT|
| 0 | INSERT STATEMENT | | | | 57 (100)| | | |
| 1 | LOAD AS SELECT | | | | | | | |
| 2 | REMOTE | distant_tab | 51 | 3009 | 57 (0)| 00:00:01 | XLCL~ | R->S |
Remote SQL Information (identified by operation id):
2 - SELECT /*+ OPAQUE_TRANSFORM */ "DST_ID","NAME_FR","NAME_NL","DST_UIC_CODE","DST_VOI
C_CODE","BUR_UIC_CODE","BUR_VOIC_CODE","INFO_NEEDED","TRANSFERRED","VALID_FROM_DATE",
"VALID_TO_DATE","SORTING","SO_NEEDED" FROM "distant_tab" "DST" (accessing'XLCL_XDST.WORLD' )
Let enable parallel DML and repeat the same insert
SQL> alter session enable parallel dml;
Session altered.
SQL> insert /*+ append parallel(lcl) */ into local_tab lcl select /*+ parralel(dst) */ dst.* from distant_tab dst;
51 rows created.
SQL> select * from table(dbms_xplan.display_cursor);
PLAN_TABLE_OUTPUT
SQL_ID 1nhmuzb4ayq7x, child number 1
insert /*+ append parallel(lcl) */ into local_tab lcl select /*+ parralel(dst) */ dst.* from distant_tab dst
Plan hash value: 2511483212
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | TQ/Ins |IN-OUT| PQ Distrib |
| 0 | INSERT STATEMENT | | | | 57 (100)| | | | |
| 1 | PX COORDINATOR | | | | | | | | |
| 2 | PX SEND QC (RANDOM) | :TQ10001 | 51 | 3009 | 57 (0)| 00:00:01 | Q1,01 | P->S | QC (RAND) |
| 3 | LOAD AS SELECT | | | | | | Q1,01 | PCWP | |
| 4 | PX RECEIVE | | 51 | 3009 | 57 (0)| 00:00:01 | Q1,01 | PCWP | |
| 5 | PX SEND ROUND-ROBIN| :TQ10000 | 51 | 3009 | 57 (0)| 00:00:01 | | S->P | RND-ROBIN |
| 6 | REMOTE | distant_tab | 51 | 3009 | 57 (0)| 00:00:01 | XLCL~ | R->S | |
Remote SQL Information (identified by operation id):
6 - SELECT /*+ OPAQUE_TRANSFORM */ "DST_ID","NAME_FR","NAME_NL","DST_UIC_CODE","DST_VOIC_CODE","BUR_UIC_COD
E","BUR_VOIC_CODE","INFO_NEEDED","TRANSFERRED","VALID_FROM_DATE","VALID_TO_DATE","SORTING","SO_NEEDED"
FROM "distant_tab" "DST" (accessing 'XLCL_XDST.WORLD' )
SQL> select * from local_tab;
select * from local_tab
ERROR at line 1:
ORA-12838: cannot read/modify an object after modifying it in parallel
SQL> select
2 dfo_number,
3 tq_id,
4 server_type,
5 process,
6 num_rows,
7 bytes,
8 waits,
9 timeouts,
10 avg_latency,
11 instance
12 from
13 v$pq_tqstat
14 order by
15 dfo_number,
16 tq_id,
17 server_type desc,
18 process
19 ;
DFO_NUMBER TQ_ID SERVER_TYP PROCES NUM_ROWS BYTES WAITS TIMEOUTS AVG_LATENCY INSTANCE
1 0 Producer QC 51 4451 0 0 0 1
1 1 Consumer QC 1 683 14 6 0 1
This time parallel DML has been used
What If I create a trigger on the local_tab table and repeat the insert?
SQL> create or replace trigger local_tab_trg
2 before insert on local_tab
3 for each row
4 begin
5 null;
6 end;
7 /
Trigger created.
SQL> insert /*+ append parallel(lcl) */ into local_tab lcl select /*+ parralel(dst) */ dst.* from distant_tab dst;
51 rows created.
SQL> select * from table(dbms_xplan.display_cursor);
PLAN_TABLE_OUTPUT
SQL_ID 1nhmuzb4ayq7x, child number 1
insert /*+ append parallel(lcl) */ into local_tab lcl select /*+
parralel(dst) */ dst.* from distant_tab dst
Plan hash value: 1788691278
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT|
| 0 | INSERT STATEMENT | | | | 57 (100)| | | |
| 1 | LOAD TABLE CONVENTIONAL | | | | | | | |
| 2 | REMOTE | distant_tab | 51 | 3009 | 57 (0)| 00:00:01 | XLCL~ | R->S |
Remote SQL Information (identified by operation id):
2 - SELECT /*+ OPAQUE_TRANSFORM */ "DST_ID","NAME_FR","NAME_NL","DST_UIC_CODE","DST_VOIC_CODE",
"BUR_UIC_CODE","BUR_VOIC_CODE","INFO_NEEDED","TRANSFERRED","VALID_FROM_DATE","VALID_TO_DATE","S
ORTING","SO_NEEDED" FROM "distant_tab" "DST" (accessing 'XLCL_XDST.WORLD' )
Parallel run has been disabled by the existence of this trigger in both distant and local database
SQL> drop trigger local_tab_trg;
Trigger dropped.
Now I want to test an insert using only the append hint as shown below
SQL> insert /*+ append */ into local_tab lcl select /*+ parralel(dst) */ dst.* from distant_tab dst;
51 rows created.
SQL> select * from table(dbms_xplan.display_cursor);
PLAN_TABLE_OUTPUT
SQL_ID 4pkxbmy8410s9, child number 0
insert /*+ append */ into local_tab lcl select /*+ parralel(dst) */
dst.* from distant_tab dst
Plan hash value: 2098243032
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT|
| 0 | INSERT STATEMENT | | | | 57 (100)| | | |
| 1 | LOAD AS SELECT | | | | | | | |
| 2 | REMOTE | distant_tab | 51 | 3009 | 57 (0)| 00:00:01 | XLCL~ | R->S |
Remote SQL Information (identified by operation id):
2 - SELECT /*+ OPAQUE_TRANSFORM */ "DST_ID","NAME_FR","NAME_NL","DST_UIC_CODE","DST_VOI
C_CODE","BUR_UIC_CODE","BUR_VOIC_CODE","INFO_NEEDED","TRANSFERRED","VALID_FROM_DATE","V
ALID_TO_DATE","SORTING","SO_NEEDED" FROM "distant_tab" "DST" (accessing
'XLCL_XDST.WORLD' )
SQL> select * from local_tab;
select * from local_tab
ERROR at line 1:
ORA-12838: cannot read/modify an object after modifying it in parallel
Question 1 : What does this last ORA-128838 means if the execution plan is not showing a parallel DML insert?
Particularly when I repeat the same insert using a parallel hint without the append hint
SQL> insert /*+ parallel(lcl) */ into local_tab lcl select /*+ parralel(dst) */ dst.* from distant_tab dst;
51 rows created.
SQL> select * from table(dbms_xplan.display_cursor);
PLAN_TABLE_OUTPUT
SQL_ID 40uqkc82n1mqn, child number 0
insert /*+ parallel(lcl) */ into local_tab lcl select /*+ parralel(dst)
*/ dst.* from distant_tab dst
Plan hash value: 2511483212
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | TQ/Ins |IN-OUT| PQ Distrib |
| 0 | INSERT STATEMENT | | | | 57 (100)| | | | |
| 1 | PX COORDINATOR | | | | | | | | |
| 2 | PX SEND QC (RANDOM) | :TQ10001 | 51 | 3009 | 57 (0)| 00:00:01 | Q1,01 | P->S | QC (RAND) |
| 3 | LOAD AS SELECT | | | | | | Q1,01 | PCWP | |
| 4 | PX RECEIVE | | 51 | 3009 | 57 (0)| 00:00:01 | Q1,01 | PCWP | |
| 5 | PX SEND ROUND-ROBIN| :TQ10000 | 51 | 3009 | 57 (0)| 00:00:01 | | S->P | RND-ROBIN |
| 6 | REMOTE | distant_tab | 51 | 3009 | 57 (0)| 00:00:01 | A1124~ | R->S | |
Remote SQL Information (identified by operation id):
6 - SELECT /*+ OPAQUE_TRANSFORM */ "DST_ID","NAME_FR","NAME_NL","DST_UIC_CODE","DST_VOI
C_CODE","BUR_UIC_CODE","BUR_VOIC_CODE","INFO_NEEDED","TRANSFERRED","VALID_FROM_DATE","V
ALID_TO_DATE","SORTING","SO_NEEDED" FROM "distant_tab" "DST" (accessing'XLCL_XDST.WORLD' )
SQL> select * from local_tab;
select * from local_tab
ERROR at line 1:
ORA-12838: cannot read/modify an object after modifying it in parallel
"in that particular case the REMOTE data was joined to some local data and there was an additional BUFFER SORT operation in the execution plan, which (in most cases) shows up when a serial to parallel distribution (S->P) is involved in an operation with further re-distribution of data, and the BUFFER SORT had to buffer all the data from remote before the local operation could continue - defeating any advantage of speeding up the local write operation by parallel DML. A serial direct path insert was actually faster in that particular case."
Question 2 : Isn’t this a normal behavior of distributed DML where the driving site is always the site where the DML operation is done? And this is why the BUFFER SORT had to buffer all the data from remote to the driving site (local site here)?
http://jonathanlewis.wordpress.com/2008/12/05/distributed-dml/
Best regards
Mohamed Houri -
Jtree; searching node by inserting path name
Hello,
I have a jtree which allows me to explore my harddisk.
The thing I want is finding a directory by inserting a path name ( with a JTextfield).
I am already able to reveice the inserted path.
But how do I let the JTree go to that inserted path name?
For more information, just ask.
Grtzwell, if you have the node and are using DefaultTreeModel, you can call: getPathToRoot(TreeNode)
Not sure how to find the node from the value except to just loop thru the entire tree... or maintain a separate table of value/node objects. -
Is there a way to get long running SQL Agent jobs information using powershell?
Hi All,
Is there a way to get long running SQL Agent jobs information using powershell for multiple SQL servers in the environment?
Thanks in Advance.
--HuntI'm running SQL's to fetch the required details and store it in centralized table.
foreach ($svr in get-content "f:\PowerSQL\Input\LongRunningJobsPowerSQLServers.txt"){
$dt = new-object "System.Data.DataTable"
$cn = new-object System.Data.SqlClient.SqlConnection "server=$svr;database=master;Integrated Security=sspi"
$cn.Open()
$sql = $cn.CreateCommand()
$sql.CommandText = "SELECT
@@SERVERNAME servername,
j.job_id AS 'JobId',
name AS 'JobName',
max(start_execution_date) AS 'StartTime',
max(stop_execution_date)AS 'StopTime',
max(avgruntimeonsucceed),
max(DATEDIFF(s,start_execution_date,GETDATE())) AS 'CurrentRunTime',
max(CASE WHEN stop_execution_date IS NULL THEN
DATEDIFF(ss,start_execution_date,stop_execution_date) ELSE 0 END) 'ActualRunTime',
max(CASE
WHEN stop_execution_date IS NULL THEN 'JobRunning'
WHEN DATEDIFF(ss,start_execution_date,stop_execution_date)
> (AvgRunTimeOnSucceed + AvgRunTimeOnSucceed * .05) THEN 'LongRunning-History'
ELSE 'NormalRunning-History'
END) 'JobRun',
max(CASE
WHEN stop_execution_date IS NULL THEN
CASE WHEN DATEDIFF(ss,start_execution_date,GETDATE())
> (AvgRunTimeOnSucceed + AvgRunTimeOnSucceed * .05) THEN 'LongRunning-NOW'
ELSE 'NormalRunning-NOW'
END
ELSE 'JobAlreadyDone'
END)AS 'JobRunning'
FROM msdb.dbo.sysjobactivity ja
INNER JOIN msdb.dbo.sysjobs j ON ja.job_id = j.job_id
INNER JOIN (
SELECT job_id,
AVG
((run_duration/10000 * 3600) + ((run_duration%10000)/100*60) + (run_duration%10000)%100)
+
STDEV
((run_duration/10000 * 3600) + ((run_duration%10000)/100*60) + (run_duration%10000)%100) AS 'AvgRuntimeOnSucceed'
FROM msdb.dbo.sysjobhistory
WHERE step_id = 0 AND run_status = 1
GROUP BY job_id) art
ON j.job_id = art.job_id
WHERE
(stop_execution_date IS NULL and start_execution_date is NOT NULL) OR
(DATEDIFF(ss,start_execution_date,stop_execution_date) > 60 and DATEDIFF(MINUTE,start_execution_date,GETDATE())>60
AND
CAST(LEFT(start_execution_date,11) AS DATETIME) = CAST(LEFT(GETDATE(),11) AS DATETIME) )
--ORDER BY start_execution_date DESC
group by j.job_id,name
$rdr = $sql.ExecuteReader()
$dt.Load($rdr)
$cn.Close()
$dt|out-Datatable
Write-DataTable -ServerInstance 'test124' -Database "PowerSQL" -TableName "TLOG_JobLongRunning" -Data $dt}
You can refer the below link to refer out-datatable and write-dataTable function.
http://blogs.technet.com/b/heyscriptingguy/archive/2010/11/01/use-powershell-to-collect-server-data-and-write-to-sql.aspx
Once we've the table details, I'm sending one consolidated email to automatically.
--Prashanth -
How to do Finder Search using Name Contains in 10.8.2
I just purchased a MacBook Pro with 10.8.2 installed. I used Migration Assistant to move my account from my old MacBook Pro which was running 10.7.8. On my old MacBook, a search for a file in a finder window dropped down to let you select "name contains", so you could type in just a bit of the filename to find a file. On my new MacBook, when I do the same thing, all I get is "name matches", which is much less useful. How do I get back to being able to use "name contains" or maybe even other options like "name starts with"??
As OS X Mountain Lion is registered to your Apple ID, you have to install the OS X version that came with your Mac or Mac OS X Snow Leopard, so he will be able to purchase Mountain Lion from the App Store.
To do it, just follow these specs:
1. Back up the data you need.
2. Insert the Snow Leopard DVD and press C key while your Mac is starting to start from the disc.
3. Go to Utilities menu > Disk Utility, select the hard disk at the top of the sidebar, go to Erase tab and erase the disc.
4. Close Disk Utility and reinstall Mac OS X. When the installation has finished, press the mouse while your Mac is starting to eject the DVD, and turn off the Mac.
You could also give him the Mac with Mountain Lion, but as he's using a different Apple ID, it's not legal and he could have problems if he needs to reinstall OS X, because the Mac won't allow him to reinstall it -
Job scheduling using dbms_scheduler.create_job
hi all experts,
i am really grateful to you for your responses, now have a look at this, i have created a job with "dbms_scheduler.create_job" and blow is the output from view "dba_schduler_jobs" why it is showing run_count to '0'...i have gone through all provided links like:
Answers to "Why are my jobs not running?"
and applied and checked all parameters, i am using oracle 10.2.0.1.0 on windows server 2003 32-bit
SQL> BEGIN
DBMS_SCHEDULER.CREATE_JOB (
job_name => 'clouser'
,job_type => 'PLSQL_BLOCK'
,job_action => 'begin package.procedure("po_closure"); end;'
,start_date => to_date('17-04-2009 22:00:00', 'dd-mm-yyyy hh24:mi:ss')
,repeat_interval => 'FREQ=DAILY;byminute=10'
,enabled => TRUE
,comments => 'op closure everyday at 11PM'
END;
PL/SQL procedure successfully completed.
SQL> select owner,job_name name,run_count run,start_date
2 from dba_scheduler_jobs
3 where owner='FINANCEDEV';
OWNER NAME RUN
START_DATE
FINANCEDEV CLOUSER 0
17-APR-09 02.45.10.000000 PM +05:30
FINANCEDEV CLOUSER_MAIN 0
18-APR-09 10.25.00.000000 AM +05:30
FINANCEDEV CLOUSER_MAIN1 0
18-APR-09 10.45.00.000000 AM +05:30
OWNER NAME RUN
START_DATE
FINANCEDEV CLOUSER_MAIN4 0
18-APR-09 10.45.00.000000 AM +05:30
FINANCEDEV CLOUSER_MAIN5 0
18-APR-09 10.43.00.000000 AM +05:30the time i scheduled has already passed, and i am checking it again and again, but no luck,can you please explain why is it so??
thanks in advance
thanks and regards
VD
Edited by: vikrant dixit on Apr 17, 2009 10:33 PMHello,
I should have asked only for next_run_date and state and failure_count. Do you see any value for failure_count column. Seems you have a failure in running of this job and whereever are you , what's the time?
You can also run this job manually using and see if run_count goes up or failure and it schedules the job for tommorrow as well.
exec DBMS_SCHEDULER.RUN_JOB('CLOUSER',TRUE);Based on your information, your next_run_date should be set to 19 APr @ 12:10 AM.
Here is example based on your information
BEGIN
sys.DBMS_SCHEDULER.create_job (
job_name => '"SCHEMA_NAME"."CLOUSER"',
job_type => 'PLSQL_BLOCK',
job_action => 'DECLARE
begin
po_closure varchar2(..) := ''some_value'';
schema_name.package_name.procedure(po_closure);
commit;
end;
repeat_interval => 'FREQ=DAILY;BYMINUTE=10;BYSECOND=0',
start_date => SYSTIMESTAMP AT TIME ZONE 'US/Eastern',
job_class => 'DEFAULT_JOB_CLASS',
auto_drop => FALSE,
enabled => TRUE
sys.DBMS_SCHEDULER.set_attribute (name => '"SCHEMA_NAME"."CLOUSER"',
attribute => 'restartable',
VALUE => TRUE);
sys.DBMS_SCHEDULER.enable ('"SCHEMA_NAME"."CLOUSER"');
END;Regards -
How can we do policy updations and insertion using procedures in insurence?
how can we do policy updations and insertion using procedures in insurence?
please answer for this post i need faced in interview.how can we write the code for that procedure in policy details using procedures in plsql.997995 wrote:
how can we do policy updations and insertion using procedures in insurence?
please answer for this post i need faced in interview.how can we write the code for that procedure in policy details using procedures in plsql.You are asking about a specific business area (Insurance) and the nuances of that business (Insurance Policies) and providing no technical details about what is required, on a technical forum. There are many varied businesses in the world and not everyone here is going to be familiar with the area of business you are referring to.
As a technical forum, people are here to assist with technical issues, not to try and help you answer questions in an interview for something you clearly know nothing about, so that you can get a job that you won't know how to do.
If you have a specific technical issue, post appropriate details, including database version, table structures and indexes, example data and expected output etc. as detailed in the FAQ: {message:id=9360002}
Maybe you are looking for
-
Itunes match... how to stop music being part of it
so 3 weeks ago.. i decided to sign up to itunes match and that was the biggest mistake of my life.. 2/3rds of music was fine.. other 1/3 (approx 1000 songs) didn't sync and wouldn't... now got the money refunded back and cancelled itunes match subscr
-
My wreak while I met my read Using Laptop away from external hard drive.
In one location, I use my laptop connected to an external hard drive. My iTunes folder and most of the music files are on the external hard drive. When I try to open iTunes at another location (without the external HD attached) I get an error message
-
Unix command in FTP connection through File Adapter
Hi All, I have a scenario IDOC to file in which the user requested for pushing file to FTP server as below put localfilename %localfilename%CITISECUFLATNA%CITIGPASSIN%%B Here my file name is test.txt. so I tried giving in communial channel as File Ac
-
Dated: Fri Oct 10 2014 (Malaysia) i'm using Windows 7 Home Premium 64 bit OS with the latest version of iTunes (11.4.0.18). My iPhone 5S already installed with iOS 8.0 but now iTunes unable to do the latest "Back Up" before i can perform the upgradin
-
How to retrieve image from a document
Hi I am a beginner to Adobe InDesign SDK (CS4) and was needing some help. Here is the sceneario I have a simple InDesign document with an image in it. I am trying to retrieve the image and do some proprietory actions on it. I am wondering if there is