Test connection generates error.
Hi,
I'm defined RFC destination for xMII in SAP ECC 6.0 system.
When I pres test connection button.
The error below is generate.
What must I do to solve it?
Thanks.
Connection Test IDOC_MII
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: SAP gateway connection failed. Is SAP gateway started?
Error Details LOCATION: SAP-Server erp2005_EC6_01 on host erp2005 (wp 0)
Error Details COMPONENT: CPIC
Error Details COUNTER: 50
Error Details MODULE:
Error Details LINE:
Error Details RETURN CODE: 236
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Sat Dec 20 17:51:32 2008
Error Details VERSION:
Hi,
Try to ping the SAP ECC 6.0 server from MII server and vice versa.
If you are able to ping, then check firewall settings too with system administrater.
Thanks
Rajesh Sivaprakasam.
Similar Messages
-
Why i am I getting Error (5,8) TestCas for a Web Service Test File Generate
why i am I getting the following error for a Web Service Test File Generated by jdeveloper when i run it:
Error (5,8) TestCase not Found
Error(12,14):constructor Object(java.lang.String) not found in java.lang.Objectactually i removed that error by added the junit.jar to my libraries but i am getting a new error when accessing the webservice with a Jdev generated web service proxy:
WARNING: Unable to connect to URL: https://mytest.test.com/WebService/MyTest_1.0/soap.soap due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
at project7.proxy.runtime.MyTestSoapBinding_Stub.echoOfficeLocation(MyTestSoapBinding_Stub.java:11977)
at project7.proxy.MyTestClient.echoOfficeLocation(MyTestClient.java:1276)
at project7.proxy.MyTestClient.main(MyTestClient.java:38)
Caused by: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(HttpClientTransport.java:174)
at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(HttpClientTransport.java:150)
at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:176)
at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:113)
at project7.proxy.runtime.MyTestSoapBinding_Stub.echoOfficeLocation(MyTestSoapBinding_Stub.java:11961)
... 2 more
Process exited with exit code 0.
looks like something to do with the certificate or keystore... how do you add the keystore to JDev.. i tried the JDK cacert but that doesnt work... -
Error while Test Connection with Connector
hi all:
there is an error while Test Connection with Connector , I also test it through sys administration->sys configuration->
suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
***************ERROR 1 while *error while Test Connection with Connector ******************************************************
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
************error sys administration->sys configuration-> suport -> sap transaction ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
.runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
9##0#0#Error##Java###04:4524/05/10_0077_6087550
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
&\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
Please check the protocol and host entries for system &\#39;sapdev&\#39;.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
(AbstractIntegratorComponent.java:123)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)Hi,
As per this part of the trace:
Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
(WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system object
with the hostname of the ITS server.
Generally the template is
<System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
So that's why you got
Please check the protocol and host entries for system .. -
I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?
Where are you hosting the site a what are you using to upload the site files to the server?
OT -
Error in Test Connection - Content Repository does not exist
Hi, I have created a content repository which points to our own external HTTP content server which is a DMS through transaction OAC0.
In transaction CSADMIN I can see our server's status as running, still it shows yellow icon "customizing missing" in CSADMIN and in transaction OAC0 whenver I click "Test Connection" it gives the message" Content Repository does not exist". CMS 106.
Kindly help.
Regards
NehaHi,
We are using OACO as follows:
Choose Tools ® Business documents, Environment ® Knowledge Provider® KPro® Content Repositories
Enter the following fields in the u201CChange Content Repositories : Detailu201D :-
1) Content Rep. :- ZO (Content Repository Name)
2) Description :- Content Repository
3) Storage type :- HTTP content server.
4) Version no :- 0045
5) HTTP svr:p :- IP or machine name of application server on which DMS has been deployed : Web port of the application server on which DMS has been deployed.
1) Program :- sap/sapDocView.jsp
Save the created Content Repository by clicking on u201CSaveu201D. We are working on SAP 4.7 versionon a SAP development server and the content repository has not been transported after creation. Will not transporting be causing this error ?
Please reward points
Thanks
Vikranth -
I'm trying to sign in on my itunes account but windows error come's up saying test connection any ideas.....
Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications -
Error in Test Connection of Content Repositories
Hello All,
I m creating a Content Repositories via Trnaction OAC0.
But, when i click on "TEST Connection" icon for testing the Connection, its giving the error " HTTP ERROR : 400 BAD REQUEST".
I have checked, all my entries while creating Content Repository are Correct.
My Dcument type is Document Management System(DMS) and
Storage Type is HTTP Content Server.
Please Help.
Thanks,
DeepakHello,
Test Page of Content Server is working fine.I have already done the URL Check for Content Server.
Below are the details of my dev_http trace.
<Date time>
[5956] sccsid: @(#) $Id: //bas/710_REL/src/krn/ftp/http.c#16 $ SAP
[5956] Environment SAP_CODEPAGE = 4110
[5956] new codepage 1160
[5956] HTTP Start : argc - 6 a0 - saphttp
[5956] /H/<IP> sapgw00 39113162 CPIC_TRACE=2 IDX=4
<Date time>
[5956] elapsed time 4625 ms - active time 0 ms - wait time 0 ms
[5956] SAPHTTP end
Thanks,
Deepak -
RFC error with SAPOSS (test connection)
Hello All,
RFC error with SAPOSS Test connection
Language:EN
Client :001
User :OSS_RFC
Target system settings:
Balace load = Yes
RFC error is below:
Connection test SAPOSS
Connection type: R/3 connection
Connection error Error opening an RFC connection.
ERROR partner not reached (host 209.94.207.139, service sapdp99)
LOCATION SAP-Server orionbw_QBW_00 on host orionbw2 (wp 0)
DETAIL NiPConnect
CALL connect
COMPONENT NI (network interface)
COUNTER 9
ERROR TEXT Network is unreachable
ERROR NUMBER 101
MODULE nixxi.cpp
LINE 8628
RETURN CODE -10
SUBRC 0
RELEASE 640
TIME Wed Jul 30 10:06:05 2008
VERSION 37
Please let me know how to proceed.
Thanks in advance.
Best Regards,
PratyushaHi Markus,
I went to OSS1 transaction Menu ---> Parameter --> Settings -
> SAP Routers at Customer Site ---> SAP Router 1
i have Added Name and IP address and instance No.
Now its throwing another error:
=============================================
ERROR rgcwebsrv: route permission denied (orionbw2.rgc.corp to 147.204.2.5,
LOCATION SAProuter 37.11 on rgcwebsrv
COMPONENT NI (network interface)
COUNTER 5580
MODULE
LINE
RETURN CODE -94
SUBRC 0
RELEASE 640
TIME Wed Jul 30 10:41:28 2008
VERSION 37
=============================================
We are struck here.
Thanks in advance
Best Regards,
Pratyusha -
Hi, I'm running the following setup:
Mac OS X 10.8.4
Virtual Box 4.2.16 r86992
Oracle Developer Days (don't know the version, just downloaded it)
SQL Developer 3.2.20.09
Networking is host-only, I tried bridged but that doesn't make a difference for the problem at hand. I can ping my virtual box just fine, telnet to port 1521 looks good too:
$ ping 192.168.56.101
PING 192.168.56.101 (192.168.56.101): 56 data bytes
64 bytes from 192.168.56.101: icmp_seq=0 ttl=64 time=0.449 ms
^C
--- 192.168.56.101 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.449/0.449/0.449/0.000 ms
$ telnet 192.168.56.101 1521
Trying 192.168.56.101...
Connected to 192.168.56.101.
Escape character is '^]'.
asdf
asdf
Connection closed by foreign host.
When I create a new connection with sql developer, with the same hostname / IP (192.168.56.101), Port 1521 (didn't change that) and SID orcl, basic connection type, it can't even connect, throwing the error mentioned in the subject:
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
I have looked at various threads in the forums here but I'm still stymied why the connection seems to be ok, yet sql developer has problems with it. If I create an ssh tunnel so sql developer only has to connect to localhost it works:
ssh -L 1521:192.168.56.101:1521 -l oracle 192.168.56.101
Message was edited by: 2a2e67cd-b5b2-4229-9fa6-21f5dfe0760dHi Ali,
This may be of varoius reasons..
Is the database that you are connecting on the same PC?
You have specified Hostname: localhost.
If not please replace it with the IP of that server.
Else please check whether the database listener is started or not. if not please start the listener.
Check the SID by tnsping command.
Hope this will help you..
Thanks
Ashok -
Error on testing connection in IDT
Hello,
I got a BI 4.1 SP03 over SBO. Connection is to MS SQL 12.
got a strange error while trying to create measure inside IDT, after a while that evertyhing was working fine.
Continued the 'investigation' and found out the connection in the BO to the DB fails - while pressing "EDIT" on the connection and pressing "Test" inside the popup - succeed.
Important: This is happening since upgrade from BI 4.0 to 4.1 SP03 3 days ago.
The file attached is the error I get while creating a measure on IDT.
Webi working fine, dashboards working fine. data is coming from DB fine. only IDT and DS runs into error (same error in all actions)
Couldn't find in similar case around - anyone have any idea?
Thank you,
Or.Hi,
I have seen the BI4.1 SP03 IDT test connection failed while the test of the same connection succeed in edit connection in IDT.
It seems that the connection I created, which is an Oracle JDBC connection, in BI4.1 SP03 universe designer is somehow not compatible with IDT test although the JDBC connection works in BI Launchpad and in Webi rich client.
The workaround is to delete this problem JDBC connection IDT does not like, and recreate it in IDT instead of universe designer. After that, this recreated JDBC connection works successfully on both universe designer and IDT connection test.
Hope this helps,
Jin-Chong -
Urgent please - Error Testing connection pool
I have a connection pool and datasource working fine, but when I click at the testing hyperlink on the weblogic console/jdbc/testing, the following message apear at the Unix console.
Caused by: javax.management.MalformedObjectNameException: bad object name,property Location has multiple values in Name=hom59DataSource,Type=ApplicationRuntime,Location=cbdHom,ServerRuntime=cbdHom,Loc
ation=cbdHom,Type=JDBCDataSourceRuntime
at java.lang.Throwable.<init>(Throwable.java:57)
at java.lang.Throwable.<init>(Throwable.java:68)
at weblogic.management.WebLogicObjectName.extractProperties(WebLogicObjectName.java:571)
at weblogic.management.WebLogicObjectName.<init>(WebLogicObjectName.java:326)
at weblogic.management.WebLogicObjectName.setParentFromObjectName(WebLogicObjectName.java:934)
at weblogic.management.WebLogicObjectName.populate(WebLogicObjectName.java:851)
at weblogic.management.WebLogicObjectName.<init>(WebLogicObjectName.java:328)
at weblogic.management.WebLogicObjectName.<init>(WebLogicObjectName.java:822)
at weblogic.management.jmx.MBeanServerInvocationHandler.getWebLogicObjectName(MBeanServerInvocationHandler.java:80)
Somebody please could help me?
Message was edited by:
DenimarHave figured this out. Need to set the "Test Connections" settings under Configurations
(Advanced Options) for the Connection Pool.
Thanks for your help :)
Joe Weinstein <[email protected]> wrote:
Everbright wrote:
Hi,
I've just started working on the Avitek Tutorials.
Encountered the following error message when testing the connectionpools for
both the XA and non-XA connections.
Warning! Connectivity to backend database not verified. This is eitherbecause
required connection pool attributes "TestConnectionsOnReserve" or "TestConnectionsOnRelease"
have not been enabled, or an invalid value has been specified for attribute"TestTableName".
Please check the server log for more details..
Any ideas what might be wrong?It is likely that some part of the information you specified about how
to connect to
your database was incorrect, so weblogic was unable to make a pool of
connections.
We will know more if you show us the server log file, which will contain
messages
about any errors it suffered during startup...
Joe
Thanks! -
Error Validating Test Connection while installing
Sir I've already installed jdev1.1.1.1.6.0 ,Xe database ,RCU, Weblogic Server is already installed in Jdeveloper(integrated weblogic server)and now to follow some tutorial I've gone thru the installation of UCM
I'm using windows7professional 64bit
When I try to
Execute .../runInstaller -OPEN WITH WINDOW IS APPEAR..what to do
and IF I assume that from setup CD1 UCm is completly installed cox it cant ask me to give path for part C2 ,and also gone complete 100% ,
when creating DOMAIN ..TEST Connection is failed due to incorect username and passeord
HOW TO FIND THAT pasword that I've selected for Schema during RCU installationUniversal Content Management 11gR1 is downloaded in 2 parts Zip files ofm_wcc_generic_11.1.1.6.0_disk1_1of2.zip and ofm_wcc_generic_11.1.1.6.0_disk1_2of2.zip and is extracted in 2 Folders Disk1 and Disk2 respectively.
UCM\Disk1\install folder contain all the Setups version ::for linus , solaris windows for both 64 and 32bit
my question is
What is the purpose of DISK2 contain STAGE folder contain Components folder as DISK 1 installation is 100% comleted
AND
COMMAND -- Drop Schema PORTAL is not working , I've created UCM and PORTAL Schema using RCU .. when Removing /DROOPING UCM/DEV and PORTAL schema ..it gives some error ..when I try to DROP UNUSED TEMPORARY CREATED SCHEMA -
please tell me sqlplus commands and rights for this .. -
Error testing connection pools
Hi,
I've just started working on the Avitek Tutorials.
Encountered the following error message when testing the connection pools for
both the XA and non-XA connections.
Warning! Connectivity to backend database not verified. This is either because
required connection pool attributes "TestConnectionsOnReserve" or "TestConnectionsOnRelease"
have not been enabled, or an invalid value has been specified for attribute "TestTableName".
Please check the server log for more details..
Any ideas what might be wrong?
Thanks!Have figured this out. Need to set the "Test Connections" settings under Configurations
(Advanced Options) for the Connection Pool.
Thanks for your help :)
Joe Weinstein <[email protected]> wrote:
Everbright wrote:
Hi,
I've just started working on the Avitek Tutorials.
Encountered the following error message when testing the connectionpools for
both the XA and non-XA connections.
Warning! Connectivity to backend database not verified. This is eitherbecause
required connection pool attributes "TestConnectionsOnReserve" or "TestConnectionsOnRelease"
have not been enabled, or an invalid value has been specified for attribute"TestTableName".
Please check the server log for more details..
Any ideas what might be wrong?It is likely that some part of the information you specified about how
to connect to
your database was incorrect, so weblogic was unable to make a pool of
connections.
We will know more if you show us the server log file, which will contain
messages
about any errors it suffered during startup...
Joe
Thanks! -
Connection Test MDX PARSER - Error
Hi,
I'm installing BPC 7.0 Netweaver.
When I test Connection MDX PARSER rfc in SM59 we get the following time out error:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host PLATONTEST016 / sapgw00
DETAIL: no connect of TP mdxsvr from host PLATONTEST016.Platon.dk after 20 sec
COMPONENT: SAP-Gateway
SAP Note 1032461 have been applied !!!
Have anyone an idea solve this issue? Any input welcome!Hello Brian,
Good Day!
I am also having the same problem and read the same note. But in my case I can't seem to register librfc32.dll in the application server.
This is the error message "C:\WINDOWS\system32\librfc32.dll was loaded DllRegisterServer entry point was not found. This file cannot be registered."
Here is our system details:
ECC 6.0
SAP_BW 700
SAPGUI 710
I am hoping someone will be helping us.
Sincerely,
Nathan
Edited by: Nathan Ray Deluao on May 20, 2009 11:34 AM -
Error in Test Connection through the DQE for my JDBC system
Hi,
I created a JDBC system and I gave DQE properties to connect to the PUBS database.
I am getting the below error when I did Test Connection through the DQE.
Test Details:
The test consists of the following steps:
1. Checks the existence of a backend admin user ID/password in the system properties.
2. Checks the existence of a default alias for the system.
3. Checks the DQE connection.
Results
1. Backend admin user ID and password exist in the system properties.
2. Default alias of the system exists.
3. DQE connection failed. The system is currently being loaded. Please wait and try again.
I re-entered admin id and password in DQE properties as per OSS note 761753.
Still I am getting the same error.
Thanks,
RamakrishnaVadim
I did all steps mentioned by you.
Still my issue is not resolved...
Thanks,
Ramakrishna
Maybe you are looking for
-
"Share Screen" not working from MacBook to iMac
Hello friends. I have an iMac (OS 10.6.6, 3.06 GHz core 2 Duo) and a MacBook Pro (OS 10.6.6, 2,53 GHz core 2 Duo) It's been a while since I had this problem, and I could not solve it. When I try to connect from iMac to MacBook (from Finder, in shared
-
After trying to change permissions on my computer so others on my network can grab files, my external Hard Drive has a lock on it and I can't access files. I've tried repairing permissions, logging in under another Administrator account, using Termin
-
Corrupted quicktime components?
since the lastest upgrade of FCP 6 several things have happened. Flip4mac Pro HD no longer works on any AVI file. I cannot digitize video from my camera via firewire. Exporting my edited movies from FCP results in one still or freeze frame. Do i need
-
ALV - Automatic Adjustable Columns (based on selection criteria)
Hi, I am currently in the process of building a costing report for a number of materials. For the output, the columns will be the months, while the rows will pertain to the specific materials (1 or 2 columns for the material text and info). For examp
-
Set screensaver from command prompt / registry tweaks
Dear all, I am trying to set our administrator accounts default screensaver settings using a BAT file that edits the registry. I'm trying to set the screensaver to the Photos Slideshow so that it will display a full page image stored in the default l