Test Plan and UAT document for LYNC 2010

Hi,
Is there Microsoft Technet Link for Test plan and User acceptance test document post implementation/migration?
Thanks
jitender

Hi jitender,
Yes, you can use Lync Rollout and Adoption Success Kit (RASK) .
The Lync Rollout and Adoption Success Kit (RASK) provides an easy-to-follow, end-to-end framework for rolling out Lync 2013 within an organization. Inclusive of checklists, best practices, and key resources, Lync 2013 RASK offers guidance and resources to
help achieve maximum results with your Lync rollout.
For more details about Lync Rollout and Adoption Success Kit (RASK):
http://blogs.technet.com/b/nexthop/archive/2013/04/19/introducing-the-lync-2013-rollout-and-adoption-success-kit-rask.aspx
Best regards,
Eric

Similar Messages

How to block file transfer and desktop sharing in Lync 2010 for Fedrated and Guest Users

Dear,
Can anybody guide me how to restrict desktop sharing and file transfer for federated and Anonymous logins in Lync 2010.
I have tried to apply this policy through “Conferencing Policy”, but this gets applied to all users including corporate users.
Please help in this.

Hi,
As my knowledge, the CsFileTransferFilterConfiguration and setting in confercing policy are used to block transfer file between users. So if the policy is applied to user, the user would not transfer file with anybody. Since all Federation and Guest
Users access thought the Access Edge service, here is a update that helps to enable the control of the file transfer through the Access Edge service.
http://support.microsoft.com/kb/2621840
The update helps to define the file transfer policy between users on the local area network and users that connect through the Access Edge server in a Microsoft Lync Server 2010 environment. It helps protect Microsoft Lync Server 2010 deployment against
the spread of the most common forms of viruses with minimal degradation to the user experience.
Regards,
Kent Huang
TechNet Community Support ************************************************************************************************************************ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a
marked post does not actually answer your question.

Test plan and scripts as accelerators

Hi
I'm about to start installing a RDS for PPM 6.0. In the SBS (Step-By-Step Guide) standard test plans and scripts are listed as accelerators. In the RDS package, however, I cannot find any documents describing the test plan or scripts. There are no links to these documents in the SBS.
Does anyone know where to find these documents for PPM 6.0?
I can of course create this manually, but it will save a lot of time to use the provided accelerators.
Thanks!
Br,
Lars

Hi AjdPC,
Thanks for your post.
Yes, this feature released in TFS 2013 Update 3. But as the TFS 2013 Update 4 has released too, so we suggest you upgrade your TFS to TFS 2013 Update 4.
After you upgraded to TFS 2013 Update 4, if you want use this feature in the old/upgraded team projects, you need configure features for these team project, please refer to the detailed information in this document:
https://msdn.microsoft.com/en-us/library/ff432837.aspx. For example, if one your upgraded team project created using CMMI 12.2, open this team project’s Web Access admin page, click
Configure Features>>select the CMMI 2013.4 in the
Choose a process template to continue textbox, then click Configure button.
For the custom process templates, we suggest you download the new 2013.4 versions process template from your collection after upgraded to TFS 2013 Update 4, then custom that 2013.4 process templates to instead of that old customized 12.2 process templates,
then upload the new customized process templates to your collection and create team project use them if you want.
That not impact your Reporting Services reports.
As I said, we suggest you upgrade to TFS 2013 Update 4, In-place upgrade or migrate upgrade both are ok.
Note: make the full backup for your TFS Server databases before any upgrade or migrate operation.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

EDQ Test planning and recording

Hi,
I'm working on a data deduplication and matching project using EDQ. We need to document our unit test plans and evidence. EDQ allows easy manual checking of dataflows but I don't want to waste time taking screen grabs and producing unwieldy documents. Are there any test planning or test automation tools that we can use? Failing that is it possible to export the results and evidence that each function has worked? If neither of these are options can i ask how others capture unit test evidence?
Thanks
Jason

Actually, we are running Analyzer and Essbase on the same server and reports on a seperate server. I inherited the Essbase/Analyzer configuration and since it is working well, I'm not looking to mess with it. Reports worked out well because we had just decommissioned a server that was running SpiderMan (Hyperion Enterprise Web tool) when we took Spiderman down, it freed up a perfectly good server which was already configured for Internet access. The install of reports was smoother than we could have hoped for.oh, and we do not have planning..Still using Pillar.

Using Test Plan and Test Suites as work items

Hi everybody.
I need to incorporate the new feature of TFS 2013 that let me manage Test Plans and Test Suites as work ítems to my current TFS environment. I have TFS 2013 Update 3 (12.0.30324); I guess this feature was released after the release I have.
So, my questions are:
- How can I integrate the work ítem definitions to my process template? I'm using a customized version of CMMI 12.2 and this version didn't have this elements as work ítems.
- How can I adjust the existing data of all my Team Projects in order to use this functionality?
- Is there any impact on the existing Reporting Services reports? or the new process template have incorporated the appropiated changes?
- Do I need to upgrade my TFS Server? If so, a migration process is needed?
Any help will be appreciated.
Best regards.

Hi AjdPC,
Thanks for your post.
Yes, this feature released in TFS 2013 Update 3. But as the TFS 2013 Update 4 has released too, so we suggest you upgrade your TFS to TFS 2013 Update 4.
After you upgraded to TFS 2013 Update 4, if you want use this feature in the old/upgraded team projects, you need configure features for these team project, please refer to the detailed information in this document:
https://msdn.microsoft.com/en-us/library/ff432837.aspx. For example, if one your upgraded team project created using CMMI 12.2, open this team project’s Web Access admin page, click
Configure Features>>select the CMMI 2013.4 in the
Choose a process template to continue textbox, then click Configure button.
For the custom process templates, we suggest you download the new 2013.4 versions process template from your collection after upgraded to TFS 2013 Update 4, then custom that 2013.4 process templates to instead of that old customized 12.2 process templates,
then upload the new customized process templates to your collection and create team project use them if you want.
That not impact your Reporting Services reports.
As I said, we suggest you upgrade to TFS 2013 Update 4, In-place upgrade or migrate upgrade both are ok.
Note: make the full backup for your TFS Server databases before any upgrade or migrate operation.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Planned and actual consumption for each confirmation

Dear All,
There is a production order. it has two operations. i have made three confirmations of each operation for that order. now i want to see the planned and actual consumption for each confirmation. how is it possible.
However i know that on order we can see planned and actual consumption but it is for total order but i want to see planned and actual consumption for each confirmation. Actually client wants that on 2nd confirmation what is planned consumption and what they consumed on actual. thanks

Hi,
In standard SAP this type of report not be there, but u can make it by using BOM,Confirmation table, & material document table.
Use AFRU to get posted document no for confirmation & detail by joining it with MSEG by mblnr & MAZHR.
now u get plan component qty by using mast & stpo if ur bom not changed in Production order , if in order component may be change then use afko & resb table & by comparing base qty or order qty & confirmation qty get plan component qty for confirmation.
Thanks
Rakesh

Article ID: 2809243 Need Readme for Lync 2010.

Tried to find the new CU for Lync 2010 and found Article ID: 2809243, but this only contains readme for Lync 2013. Does anyone know where to find the right one for Lync 2010?

Check here for a current list including the April 2014 update:
http://support.microsoft.com/kb/2493736
Direct link to the April update:
http://support.microsoft.com/kb/2957044
I'd stick with the first link, and run the LyncServerUpdateInstaller and back end database updates when you're aware of new releases. It just makes life easy.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Sample test plan and deployment plan

Hi,
Is there anyone know where I can get the test plan and deployment plan samples regarding the configuration?
Best Regards
Jean

Hi Jean ,
A CD will be given by SAP for its customes named 'ValueSAP ' . IF you can install this CD , you can get these templates.
Thanks,
Sudhi

Design and Sizing Document for CUCM 8.x

HI Team,
Guys i need Sizing and Design Document for CUCM 8.x.
There is a new client and we need to do the sizing and design for that client on CUCM 8.x platform.
Request you to assist me with document. I need a document which will give me the sizing and design viewpoints.
I am sure there would so many guys who would have done this already.
Awaiting your reply asap.
Rgds,
JF

Cisco Unified Communications System 8.x SRND
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/uc8x.html
HTHjavaIf this helps, please ratewww.cisco.com/go/pdihelpdesk

Issues with iPhone and Android connecting to Lync 2010?

Our environment currently consists of a single Lync 2010 instance, which is currently performing all roles. The current challenge I'm running into is connectivity to iOS and Android devices not wanting to cooperate. Currently, Lync is using a certificate
issued by a local CA. The CA root certificate has been imported to the devices that are having trouble connecting, and I've done this via email import without success, as well as using the iPhone Configuration Utility. In all tested instances, an error that
"the certificate can't be verified" is displayed that prohibits a user from establishing a connection. All domain workstations and remote users that import the root CA have no issues connecting.
I can't seem to figure out what's going on here. Has anyone run into this? This is a quasi-test environment in my lab that I'm testing with a few other people, and as much as we've tried, can't seem to figure out the issue. Any ideas?

To confirm that the certificate has been installed successful do you have a corporate website that is available externally that uses a certificate issued by the CA in question? If the answer is yes I would browse to that site on the phone and see if you
get an error. The Lync mobile clients don't give you a heck of a lot of information for troubleshooting. This will rule out a certificate issue.
Next thing would be your reverse proxy. Are you using ISA server? Test the reverse proxy rule by browsing to the Lync mobile auto discover URL - https://lyncwebexternal.domain.com/Autodiscover/AutodiscoverService.svc/root
Assuming ISA also make sure the rule is configure correctly -
http://technet.microsoft.com/en-us/library/hh690011.aspx
http://blogs.technet.com/b/nexthop/archive/2012/11/19/configuring-reverse-proxy-for-lync-server-2010-mobility.aspx
Let me know what the results are of those tests.
Andrew Morpeth
Lync Server Specialist - Auckland, NZ
Check out my blog

Drag and drop documents to Lync 2013 message not working

I have searched the forum and can't find a reference to my specific issue. With Lync 2010, I could drag and drop a word document or an excel spreadsheet into the message box. The recipient would get a message to click on the document to retrieve
it. When I do this with Lynch 2013, all that displays in the message is an icon for a word document or an excel spreadsheet . . . the recipient does not receive an actual document that can be opened.
How do I get Lync 2013 to allow for dragging/dropping like Lync 2010 supported?
Thanks!

Hi lac55,
You can right click the icon, it will prompt you to download the file and the file will be saved under “C:\Users\xxx \Documents\My Received Files”.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Different value in sales order and billing document for one line item

Hi Experts,
User created a sales order with three line items say line item 10, line item 20, line30 and he did the delivery and billing also. Line item 10 value is 5024.26 EUR in Sales order
At the time of billing the value of a line item 10 is increased by 0.02 i.e. 5024.28
I asked the user cancel that invoice and the post goods issue. He cancelled the invoice and post goods issue. Then he created the PGI and billing now the value of line item decrease by 0.01(5024.27) again he cancelled the invoice and post goods issue. he created the post goods issue and billing. Now the value is correct i.e. 5024.26.
User is asking me the reason can any one help me in this
Note: price is copying from delivery to billing

Morning Sunina
Now consider this scenario
Item a - 10
Item b - 20
Item c - 30
and the validity of condition rec for item C is 31st of Jan
after 31st JAN the record changes or there isn't any.
In Copy control the pricing type is 'B' i.e., carry out new pricing.
Now if the document is created in January it will take all the above prices. and this document is then billed in Feb. Now the copycontrol, whilst copying the prices, will predetermine the same.
Now your task is to check if there was user intervention, check the pricing in order and check what condition types got affected in order and in billing.
If your scenario is still not amongst the above cases...
I don't know what to do, if you figure out please let us also know, god know when we would face the same scenario....
Take care

Difference amount in sales order and billing document (For one line item)

Hi Experts,
User created sales order with 3 line items and billing document. but problem is that there is difference in value of sale order and billing only for line item 10. The remaining items values are same in sales order & billing doc.if I check in sales order condition I found that VPRS condition is used and the value is 692.13and the amount is 3245.26in sales order. But if suppose I check the same value in billing doc the value is 0.69 and the amount is 3245.28. Can u suggest me which configuration I have to check for this.
I also checked change lock but there is no change in sales and billing document & Material
Regards
Sunina agarwal

Morning Sunina
Now consider this scenario
Item a - 10
Item b - 20
Item c - 30
and the validity of condition rec for item C is 31st of Jan
after 31st JAN the record changes or there isn't any.
In Copy control the pricing type is 'B' i.e., carry out new pricing.
Now if the document is created in January it will take all the above prices. and this document is then billed in Feb. Now the copycontrol, whilst copying the prices, will predetermine the same.
Now your task is to check if there was user intervention, check the pricing in order and check what condition types got affected in order and in billing.
If your scenario is still not amongst the above cases...
I don't know what to do, if you figure out please let us also know, god know when we would face the same scenario....
Take care

Link between Maintenance plan and measuring document

Hi Gurus,
Is there a way to find out if a measuring document exists for a maintenance plan? IMRG has the measuring document information, but I could not find any link to the maintenance plan. Similarly, in table MPLA/MPOS, I could not find anything. Please help.

Greetings Srinivas,
Look in table MMPT, field MMPT-POINT. This will provide you with a link to the table IMRG on IMRG-POINT. If entries exist in IMRG, they correspond to Measurement Documents for that Point.
When displaying the Maintenance Plan in IP03 for example, you can view the Measurement Documents easily using the "Counter Information" icon.

Can I enable menu for base document and target document for user forms

Hello friends
I want to add Base and target document functionality for our addon
but when i do this
oform.EnableMenu("5899", True)   ' 5899 is menu uid for target document
i got this exception
Menu - Not found [66000-27]
Is there another way around
Thanks in advance ....
Atul

Atul try adding this to ur form Xml schema and specify the userdatasrc(bold text) for the form as well..
<item uid="10000329" type="113" left="475" tab_order="0" width="90" top="481" height="19" visible="1" enabled="0" from_pane="0" to_pane="0" disp_desc="0" right_just="0" description="" linkto="" forecolor="-1" backcolor="-1" text_style="0" font_size="-1" supp_zeros="0" AffectsFormMode="1">
              <AutoManagedAttribute />
              <specific AffectsFormMode="1" TabOrder="0">
                <ValidValues>
                  <action type="add">
                    <ValidValue value="A/R Credit Memos" description="14" />
                  </action>
                </ValidValues>
                <b><databind databound="1" table="" alias="SYS_312" /></b>
              </specific>
            </item>
            <item uid="10000330" type="113" left="380" tab_order="0" width="90" top="481" height="19" visible="1" enabled="1" from_pane="0" to_pane="0" disp_desc="0" right_just="0" description="" linkto="" forecolor="-1" backcolor="-1" text_style="0" font_size="-1" supp_zeros="0" AffectsFormMode="1">
              <AutoManagedAttribute />
              <specific AffectsFormMode="1" TabOrder="0">
                <ValidValues>
                  <action type="add">
                    <ValidValue value="Sales Quotations" description="23" />
                    <ValidValue value="Sales Orders" description="17" />
                    <ValidValue value="Deliveries" description="15" />
                  </action>
                </ValidValues>
                <b><databind databound="1" table="" alias="SYS_313" /></b>
              </specific>
            </item>

Test Plan and UAT document for LYNC 2010

Similar Messages

Maybe you are looking for