Test tab giving correct result but msg to receiver is incorrect?
Hi Experts,
When i test the message (in test tab)taken from the source payload from moni, i get the correct output as expected. But the message send to receiver is not correct.
why is this deviation i dont understand.
Pls help !!
Regards,
Suresh.
Hi
In IR/ID > Cache notifications, Click on the entry which is in red or yellow and press "Repeat Cache Notifications". Do it for all the entries that are not in green and make sure that all the entries are in green.
Go to SXI_CACHE and now you should be able to see all your objects.
If not present, goto XI Runtime Cache and click on Start Complete Cache refresh.
Still the objects are missing, click on Start Delta Cache refresh.
This should solve ur problem.
~Praveen.
Similar Messages
-
Message Mapping vs Interface Mapping test tabs giving different results.
Hi all,
I am developing an interface that always requires an output file to be created (even if there is no data). I have found a way to change my select statement in the JDBC sender to initiate the message even if there isn't any data (using UNION select -1 ID, '' col1, '' col2, etc.) and that seems to work fine. I then put logic in the message mapping to suppress the row that contains the -1 ID value, which would result in an empty file when there is no other data, and should result in a file containing only the correct data when there is data.
So, my problem: I am always getting empty files with this logic. I tested the logic in the message mapping test tab and it worked perfectly, however when I test it using the interface mapping test tab it results in what becomes an empty file!
My source and destination structures are fairly simple:
Root
--row
ID
col1
col2
The logic I use to suppress the ID = -1 row is:
=removeContexts([]ifWithoutElse([keepss=true]Not([]equalsS([]ID, Constant([value=-1]))), SplitByValue([type=Each value]row)))
Obviously, I'm stumped - any help would be appreciated!
Edited by: Mike Morrison on Sep 23, 2010 5:04 PMHi Mike,
Can you quote the error log..u r getting error in message mappin or interface mapping?
Please suggest the test results for both the mappings.
Thanks,
Sushama -
% Change is not giving correct results.
Hi,
I am using Ago Function to calculate Current month cx count , previous month cx count, present month acct count, previous month acct count and in the report parameter selecting Reporting Month as DEC 09. The results are coming perfectly fine... but when I create % Change Previous Month Cx count and % change Previous month Account count, It is not showing the correct results and getting only 0% listed even if the Difference is huge and should be around 10% ...
The code written to calculate % change is :
CASE WHEN ("EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" IS NULL OR "EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" = 0) AND NOT "EIP BDW Analytics"."EIP Reporting FACT"."Current Month Account Count" IS NULL AND "EIP BDW Analytics"."EIP Reporting FACT"."Current Month Account Count" <> 0 THEN 100.0 WHEN ("EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" IS NULL OR "EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" = 0) AND ("EIP BDW Analytics"."EIP Reporting FACT"."Current Month Account Count" IS NULL OR "EIP BDW Analytics"."EIP Reporting FACT"."Current Month Account Count" = 0) THEN 0.0 WHEN "EIP BDW Analytics"."EIP Reporting FACT"."Current Month Account Count" IS NULL AND NOT "EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" IS NULL AND "EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" <> 0 THEN -(100.0) ELSE 100.0 * ("EIP BDW Analytics"."EIP Reporting FACT"."Current Month Account Count" - "EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count") / "EIP BDW Analytics"."EIP Reporting FACT"."Previous Month Account Count" END
Can some one tell me what I need to do in order to get the desired results.
I am using a time dimension with the following hierarchy ( Year - Month - Period_ID) joined with the Reporting Table Fact which has count of cx and Count of Accts.We have two assets one acquired on 01/04/2014 and another on 26/04/2014. Everything else is same for both assets like asset class , keys etc.
Now here are two calculations.
System is giving calculation ok , what should we do so that for both assets we are left with same scrap value (1047) (and not 1119.68 as in last line )
Can anyone help how to get value in last field of screen shot given below asset vale date or it is always blank.
wanted to add something in our case DEP to the DAY is also ticked in dep key.
regards
Sanjeev Mehndiratta -
Outer Join not giving correct result
I have two tables=> tab_child_tmp (product_id,region,child_val,mst_product) and
tab_master_tmp (master_product_id,region,master_val)
tab_child_tmp.mst_product is the foreign key referencing tab_master_tmp.master_product_id.
Currently the tables are populated with below values
tab_child_tmp
PRODUCT_ID REGION CHILD_VAL MST_PRODUCT
Arm-01, CAL, 100, Arm-Master
Arm-01, DEL, 222, Arm-Master
Arm-01, CHEN, 55, Arm-Master
Arm-02, MUM, 69, Arm-Master
Arm-02, DEL, 90, Arm-Master
tab_master_tmp
MST_PRODUCT REGION MASTER_VAL
Arm-Master , CAL, 390
Arm-Master , DEL, 300
Arm-Master, CHEN, 450
Arm-Master, MUM, 600
Now I want to display the result in the below format
PRODUCT_ID REGION CHILD_VAL MASTER_VAL
1. Arm-01 , CAL, 100, 390
2. Arm-01 , DEL, 222, 300
3. Arm-01 , CHEN, 55, 450
4. Arm-01 , MUM, 0, 600
5. Arm-02 , MUM, 69, 600
6. Arm-02 , DEL, 90, 300
7. Arm-02 , CHEN, 0, 450
8. Arm-02 , CAL, 0, 390
When I am running the below query it is not returning the above 4,7 and 8 rows. Can you please provide the correct sql to get the above desired output
SELECT
a.product_id,
nvl(a.region,b.region) geo,
nvl(a.child_val,0)match_val,
b.master_val
FROM
tab_child_tmp a,
tab_master_tmp b
WHERE
a.mst_product(+) = b.master_product AND
a.region(+) = b.region
ThanksHi
Thanks for the reply. Please find below the details.
Oracle Version*
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Solaris: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Create Table Script_
create table TAB_CHILD_TMP
PRODUCT_ID VARCHAR2(50),
REGION VARCHAR2(100),
CHILD_VAL NUMBER,
MST_PRODUCT VARCHAR2(50)
create table TAB_MASTER_TMP
MST_PRODUCT VARCHAR2(50),
REGION VARCHAR2(100),
MASTER_VAL NUMBER
Insert Script_
INSERT INTO tab_child_tmp VALUES ('Arm-01','CAL',100,'Arm-Master');
INSERT INTO tab_child_tmp VALUES ('Arm-01','DEL',222,'Arm-Master');
INSERT INTO tab_child_tmp VALUES ('Arm-01','CHEN',55,'Arm-Master');
INSERT INTO tab_child_tmp VALUES ('Arm-Master','MUM',69,'PLC1');
INSERT INTO tab_child_tmp VALUES ('Arm-Master','DEL',90,'PLC1');
INSERT INTO tab_master_tmp VALUES ('Arm-Master','CAL',390);
INSERT INTO tab_master_tmp VALUES ('Arm-Master','DEL',300);
INSERT INTO tab_master_tmp VALUES ('Arm-Master','CHEN',450);
INSERT INTO tab_master_tmp VALUES ('Arm-Master','MUM',600);
INSERT INTO tab_master_tmp VALUES ('PLC1','MUM',199);
INSERT INTO tab_master_tmp VALUES ('PLC1','DEL',299);
INSERT INTO tab_master_tmp VALUES ('PLC1','CHEN',399);
Expected output logic*
Need to display the product value for each region along with the value of master product for the corresponding product and region. If a product doesn't belong to a particular region, but the corresponding master product is, then that value also needs to be displayed for that product and region with child value as zero.
ie. for product Arm-01 there is no record in tab_child_tmp for region "MUM", but it's master product 'Arm-Master' has a record for region 'MUM' in tab master_tmp table. So in ouput there will be a record for product 'Arm-01' and region-'MUM' with child value as 0 and master value as 600.
Expected Output*
PRODUCT_ID ~~~ REG ~~~ CHILD_VAL ~~~ MASTER_VAL
Arm-01 ~~~ CAL ~~~ 100 ~~~ 390
Arm-01 ~~~ DEL ~~~ 222 ~~~ 300
Arm-01 ~~~ CHEN ~~~ 55 ~~~ 450
Arm-01 ~~~ MUM ~~~ 0 ~~~ 600
Arm-MASTER ~~~ MUM ~~~ 69 ~~~ 199
Arm-MASTER ~~~ DEL ~~~ 90 ~~~ 299
Arm-MASTER ~~~ CHEN ~~~ 0 ~~~ 399
Please help -
Access and JDBC not giving correct results
I am running a Query on an access DB
SELECT COUNT(*) FROM TABLE1 WHERE [First Name] LIKE '*Jamie*'
is the SQL query that should be executed. I get 0 errors or warnings but I get a result back as 0
res.next(); int max = res.getInt(1);
The max is always returned as 0.
When I do the SAME SQL query but
SELECT COUNT(*) FROM TABLE1 WHERE [First Name] = 'Jamie'
and with the above code, I get results
I am confused... please help!why should you? sql doesn't read minds. it's an error only in your understanding. you passed a perfectly reasonable string the first time.
% -
Testing App Mod shows results, but none in page...
I created a VO that displays data (no where clause) and added it to the App Mod. Tested it and see all the data. Added the data control to my .jspx page as read-only table with 4 columns. Run the page and get 'No rows yet.' The credentials are in the db connection... why would I get no results?
BTW - no errors in log in JDev... connection is to a SQL 2000 server database... Thanks!
Message was edited by:
ginnimFROM ((RPT.[Personnel Outgoing Visit]
INNER JOIN RPT.Personnel ON RPT.[Personnel Outgoing Visit].[Employee Record Number] = RPT.Personnel.[Employee Record Number])
INNER JOIN RPT.[Outgoing Visit] ON RPT.[Personnel Outgoing Visit].[Outgoing Visit Record Number] = RPT.[Outgoing Visit].[Outgoing Visit Record Number])
INNER JOIN RPT.Facility ON RPT.[Outgoing Visit].[To Facility Code] = RPT.Facility.[Facility Code]
WHERE ((RPT.[Personnel Outgoing Visit].[Start Date] < CURRENT_TIMESTAMP) AND (RPT.[Personnel Outgoing Visit].[End Date] > CURRENT_TIMESTAMP))
07/05/01 13:36:19 [359] ViewObject: VisitClearances Estimated Row Count Query Statement:
07/05/01 13:36:19 [360] "SELECT count(1) FROM (SELECT RPT.[Outgoing Visit].[From Facility Code], RPT.[Personnel Outgoing Visit].[Employee Name] AS EMP_NAME, RPT.Personnel.[Employee Number] AS EMP_ID, RPT.Personnel.[Cost Center] AS COST_CENTER, LEFT(RPT.Personnel.[Cost Center], 2) AS DIVISION, RPT.[Outgoing Visit].[Clearance Required] AS CLASSIFICATION, RPT.[Personnel Outgoing Visit].[Start Date] AS START_DATE, RPT.[Personnel Outgoing Visit].[End Date] AS END_DATE, RPT.Facility.Organization, RPT.Facility.City AS CITY, RPT.Facility.State AS STATE, RPT.[Personnel Outgoing Visit].POC AS POC, RPT.[Outgoing Visit].[Visit Purpose] AS PURPOSE
FROM ((RPT.[Personnel Outgoing Visit]
INNER JOIN RPT.Personnel ON RPT.[Personnel Outgoing Visit].[Employee Record Number] = RPT.Personnel.[Employee Record Number])
INNER JOIN RPT.[Outgoing Visit] ON RPT.[Personnel Outgoing Visit].[Outgoing Visit Record Number] = RPT.[Outgoing Visit].[Outgoing Visit Record Number])
INNER JOIN RPT.Facility ON RPT.[Outgoing Visit].[To Facility Code] = RPT.Facility.[Facility Code]
WHERE ((RPT.[Personnel Outgoing Visit].[Start Date] < CURRENT_TIMESTAMP) AND (RPT.[Personnel Outgoing Visit].[End Date] > CURRENT_TIMESTAMP))) ESTCOUNT"
07/05/01 13:36:19 [361] DBTransactionImpl.createPreparedStatement failed...
07/05/01 13:36:19 [362] java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Can't start a cloned connection while in manual transaction mode.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseStatement.setupImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseStatement.<init>(Unknown Source)
at com.microsoft.jdbc.base.BasePreparedStatement.<init>(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.prepareStatement(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.prepareStatement(Unknown Source)
at oracle.jbo.server.DBTransactionImpl.createPreparedStatement(DBTransactionImpl.java:3399)
at oracle.jbo.server.DBTransactionImpl2.createPreparedStatement(DBTransactionImpl2.java:428)
at oracle.jbo.server.ViewObjectImpl.getQueryHitCount(ViewObjectImpl.java:2258)
at oracle.jbo.server.ViewObjectImpl.getQueryHitCount(ViewObjectImpl.java:2227)
at oracle.jbo.server.QueryCollection.getEstimatedRowCount(QueryCollection.java:2560)
at oracle.jbo.server.ViewRowSetImpl.getEstimatedRowCount(ViewRowSetImpl.java:1965)
at oracle.jbo.server.ViewObjectImpl.getEstimatedRowCount(ViewObjectImpl.java:5987)
at oracle.adf.model.bc4j.DCJboDataControl.getEstimatedRowCount(DCJboDataControl.java:965)
at oracle.adf.model.binding.DCIteratorBinding.getEstimatedRowCount(DCIteratorBinding.java:2969)
at oracle.jbo.uicli.binding.JUCtrlRangeBinding.getEstimatedRowCount(JUCtrlRangeBinding.java:115)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlRangeBinding$FacesModel.getRowCount(FacesCtrlRangeBinding.java:395)
at oracle.adf.view.faces.component.UIXCollection.getRowCount(UIXCollection.java:271)
at oracle.adf.view.faces.model.ModelUtils.findLastIndex(ModelUtils.java:117)
at oracle.adf.view.faces.component.TableUtils.getLast(TableUtils.java:65)
at oracle.adf.view.faces.component.TableUtils.getLast(TableUtils.java:39)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.table.TableUtils.getVisibleRowCount(TableUtils.java:125)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.table.RowData.<init>(RowData.java:22)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.table.TableRenderingContext.<init>(TableRenderingContext.java:56)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.TableRenderer.createRenderingContext(TableRenderer.java:375)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.TableRenderer.encodeAll(TableRenderer.java:198)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.DesktopTableRenderer.encodeAll(DesktopTableRenderer.java:80)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:169)
at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
at oracle.adf.view.faces.component.UIXCollection.encodeEnd(UIXCollection.java:456)
at oracle.adfinternal.view.faces.uinode.UIComponentUINode._renderComponent(UIComponentUINode.java:317)
at oracle.adfinternal.view.faces.uinode.UIComponentUINode.render(UIComponentUINode.java:262)
at oracle.adfinternal.view.faces.uinode.UIComponentUINode.render(UIComponentUINode.java:239)
at oracle.adfinternal.view.faces.ui.composite.ContextPoppingUINode$ContextPoppingRenderer.render(ContextPoppingUINode.java:224)
at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:346)
at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:301)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderChild(BaseRenderer.java:412)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderIndexedChild(BaseRenderer.java:330)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderIndexedChild(BaseRenderer.java:222)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderContent(BaseRenderer.java:129)
at oracle.adfinternal.view.faces.ui.BaseRenderer.render(BaseRenderer.java:81)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.XhtmlLafRenderer.render(XhtmlLafRenderer.java:69)
at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:346)
at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:301)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderChild(BaseRenderer.java:412)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderIndexedChild(BaseRenderer.java:330)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderIndexedChild(BaseRenderer.java:222)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderContent(BaseRenderer.java:129)
at oracle.adfinternal.view.faces.ui.BaseRenderer.render(BaseRenderer.java:81)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.XhtmlLafRenderer.render(XhtmlLafRenderer.java:69)
at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:346)
at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:301)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderChild(BaseRenderer.java:412)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderIndexedChild(BaseRenderer.java:330)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderIndexedChild(BaseRenderer.java:222)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderContent(BaseRenderer.java:129)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.BorderLayoutRenderer.renderIndexedChildren(BorderLayoutRenderer.java:42)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.BorderLayoutRenderer.renderContent(BorderLayoutRenderer.java:71)
at oracle.adfinternal.view.faces.ui.BaseRenderer.render(BaseRenderer.java:81)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.XhtmlLafRenderer.render(XhtmlLafRenderer.java:69)
at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:346)
at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:301)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderChild(BaseRenderer.java:412)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderIndexedChild(BaseRenderer.java:330)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderIndexedChild(BaseRenderer.java:222)
at oracle.adfinternal.view.faces.ui.BaseRenderer.renderContent(BaseRenderer.java:129)
at oracle.adfinternal.view.faces.ui.BaseRenderer.render(BaseRenderer.java:81)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.XhtmlLafRenderer.render(XhtmlLafRenderer.java:69)
at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:346)
at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:301)
at oracle.adfinternal.view.faces.ui.composite.UINodeRenderer.renderWithNode(UINodeRenderer.java:90)
at oracle.adfinternal.view.faces.ui.composite.UINodeRenderer.render(UINodeRenderer.java:36)
at oracle.adfinternal.view.faces.uinode.UIXComponentUINode.renderInternal(UIXComponentUINode.java:177)
at oracle.adfinternal.view.faces.uinode.UINodeRendererBase.encodeEnd(UINodeRendererBase.java:53)
at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
at oracle.adfinternal.view.faces.renderkit.RenderUtils.encodeRecursive(RenderUtils.java:54)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeChild(CoreRenderer.java:242)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeAllChildren(CoreRenderer.java:265)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.renderContent(PanelPartialRootRenderer.java:65)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.renderContent(BodyRenderer.java:117)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.encodeAll(PanelPartialRootRenderer.java:147)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.encodeAll(BodyRenderer.java:60)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:169)
at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
at javax.faces.webapp.UIComponentTag.encodeEnd(UIComponentTag.java:645)
at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:568)
at oracle.adf.view.faces.webapp.UIXComponentTag.doEndTag(UIXComponentTag.java:100)
at EVCsjspx._jspService(_EVCs_jspx.java:823)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:598)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:522)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:712)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:286)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:50)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:192)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:197)
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:620)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
at java.lang.Thread.run(Thread.java:595) -
After installing Firefox 16.0.1, I always get a warning whenever I close multiple tabs, even though there is no check mark against the option, "Warn me when closing multiple tabs".
This a recent bug problem. In other versions do no exist. Some users like warnings, but others not, like me.
-
i am not able to get there because the questions keep popping up
You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(101210) -
Query not giving the correct result
select Project_id, contractno
from elf_transactions
where(rtrim(contractno),rtrim(project_id)) not in
(select rtrim(contractno),rtrim(projectid)
from contract_proj
where report_month='1-May-2007' )
when I m firing this query, it is not giving correct result to me, it also select the recorts which are matches in both the table
i want to fine out those contract, with projectid which are not in contract_proj table
Please help me in this regardCREATE TABLE ELF_TRANSACTIONS
VENDOR_ORDER_REF VARCHAR2(60 BYTE),
BT_SUB_CON_REF VARCHAR2(10 BYTE),
PR_NO VARCHAR2(15 BYTE),
PO_NO VARCHAR2(15 BYTE),
PR_PO_DESCR VARCHAR2(200 BYTE),
ONE_IT_PROG VARCHAR2(50 BYTE),
BT_DEL_MANAGER_NAME VARCHAR2(40 BYTE),
DELIVERY_TYPE VARCHAR2(5 BYTE),
ACTUAL_DEP_DATE DATE,
ASSOC_ASG_BR_QUE VARCHAR2(50 BYTE),
PRE_AVG_P1_P2_INC_CNT NUMBER(3),
POST_P1_P2_INC NUMBER(3),
PERC_GROWTH_POST_REL NUMBER(3),
VENDOR_DEL_MANAGER VARCHAR2(50 BYTE),
REPORT_MONTH DATE,
COMMENTS VARCHAR2(200 BYTE),
PROJECT_ID VARCHAR2(20 BYTE),
CONTRACTNO VARCHAR2(15 BYTE),
CONTRACT_TYPE NVARCHAR2(15),
IDUNO VARCHAR2(10 BYTE),
STATUS VARCHAR2(10 BYTE),
DESCRIPTIONCODEDELIVERABLE VARCHAR2(255 BYTE),
UNIQUEID VARCHAR2(255 BYTE),
LOCK_RECORD CHAR(1 BYTE),
VERIFIED CHAR(1 BYTE),
VERIFIED_BY VARCHAR2(40 BYTE),
BT_VERIFIED CHAR(1 BYTE),
BT_VERIFIED_BY VARCHAR2(40 BYTE)
CREATE TABLE CONTRACT_PROJ
CONTRACTNO VARCHAR2(10 BYTE),
PROJECTID VARCHAR2(20 BYTE),
IDUNO VARCHAR2(10 BYTE),
CH_EMPID VARCHAR2(8 BYTE),
CHNAME VARCHAR2(40 BYTE),
GH_EMPID VARCHAR2(8 BYTE),
GHNAME VARCHAR2(40 BYTE),
PM_EMPID VARCHAR2(8 BYTE),
PMNAME VARCHAR2(40 BYTE),
SPM_EMPID VARCHAR2(8 BYTE),
SPMNAME VARCHAR2(40 BYTE),
PRJ_MONTH DATE,
BT_CONTRACT CHAR(1 BYTE)
REPORT_MONTH COMMENTS PROJECT_ID CONTRACTNO CONTRACT_TYPE IDUNO STATUS DESCRIPTIONCODEDELIVERABLE UNIQUEID
06/01/2007 00:00:00 1287 TML007452 OPEN Delivery of CRs DM CD and NSI N/A
06/01/2007 00:00:00 1280 TML007452 OPEN Delivery of CRs H&W OOR and WLTO N/A
06/01/2007 00:00:00 1231 TML007452 OPEN Delivery of CRs H&W OOR WLTO
06/01/2007 00:00:00 1097 TML007679 OPEN High Level Roadmap for Global Services and Wholesale with Feasibility study into BTR access to Switc N/A
06/01/2007 00:00:00 405 TML007942 OPEN RTRCC DEVELOPMENT -Q107
06/01/2007 00:00:00 405 TML007919 OPEN WLR3 DEVELOPMENT-Q107
06/01/2007 00:00:00 1170 TML008439 OPEN R-510
CONTRACTNO PROJECTID IDUNO CH_EMPID CHNAME GH_EMPID GHNAME PM_EMPID PMNAME SPM_EMPID SPMNAME PRJ_MONTH BT_CONTRACT
MBT003060 176 BT06 8694 Soman Sameer Surendra 1054 Bhadti Shripad Shivram 1054 Bhadti Shripad Shivram 1420 Rao Darbhamulla Kameswara 05/01/2007 00:00:00 N
MBT003842 1156 BT12 19992 Kalle Ajit Ashutosh 1539 Padgaonkar Shailesh Vishwanath 13948 Khunte Milind Vasant 16426 Kulkarni Vinay 05/01/2007 00:00:00 Y
MBT004677 458 BT09 20275 Mundassery George 5044 Kamalapurkar Leena Shrinivas 12849 Dave Ajay Yogeshchandra 2017 KIRKIRE SONAL MADHUKAR 05/01/2007 00:00:00 N
MBT004695 362 BT13 20276 Ghosh Sankar 2624 Avachat Jagdish Vasantrao 13592 Pal Sudipta 2624 Avachat Jagdish Vasantrao 05/01/2007 00:00:00 N
MBT004826 VITRIA BT09 20275 Mundassery George 26099 Saha Debendra Kumar 28134 Hinge Anand Sharad 12777 Karandikar Sumedh Vidyadhar 05/01/2007 00:00:00 Y
MBT004924 1027 BT03 1451 Tillu Ashirwad 15693 Devaraj Daniel G 6867 Jadhav Satyajit Ramesh 15693 Devaraj Daniel G 05/01/2007 00:00:00 N
MBT004927 1025 BT05 4436 Kelkar Subhash Manohar 20379 Gore Sujeet Narayan 13704 Vignesh Chandrasekaran 4347 BIJNORI REHANA GULAMWARIS 05/01/2007 00:00:00 N
MBT004927 1092 BT05 4436 Kelkar Subhash Manohar 15094 Jain Jitendra 13350 Bokil Shripad Raghunath 9511 Markande Balchandra Narayan 05/01/2007 00:00:00 N
MBT004927 1213 BT09 20275 Mundassery George 19996 Vege Sridhar 16401 Sibgathulla Mohammed 19996 Vege Sridhar 05/01/2007 00:00:00 N -
Enterprise Manager does not give correct results
I am using version 9.0.2.0.1 core edition(oc4j & web-cache).
My application consists of business components, java beans and jsp. It is running fine.
Oracle enterprise manager is not giving correct results of memory/cpu usage by oc4j_home and bc4j.
Some times it does not gives result, when i refresh it twice or thrice it shows results.
But results are not correct. On each refresh it gives different results.
Then it is very hard to find which resuslt is correct.
waiting for response,
Tahir.i have been using 9iAS versions 102*, 90200, 90201, and now using 903.
As stated above, some times the results for oc4j_home is displayed.
But the memory/cpu usage for bc4j is never shown.
Also, its radio-button is always disabled. while its status is "running".
On BC4J page, it also shows results of application modules created. But these results are usually wrong.
How bc4j will be enabled, and how its memory results can be get ???
Tahir. -
Date difference is not showing the correct result for date interval
Hi Expert,
I've created two formula variable one for PO date and another for GR date
while i am taking the date difference of GR and PO date for single PO date selection
it showing me correct result , but while i am taking the date interval for PO date it not
showing the correct result.
eg: PO date: 01.01.2010 for a particular PO and Gr date is suppose 03.01.2010, 06.01.2010
it showing the result 2 and 5.
But if i am taking date interval for PO date:
eg: 01.01.2010 - 31.01.2010
PO date: 10.01.2010 and GR date are suppose 15.01.2010, 22.01.2010 and 30.01.2010
it showing me 14, 21 and 29
Thanks and Regards
Lalit KumarHi Expert,
Through replacement path.
Thanks and Regards
Lalit Kumar -
Aggregation not showing correct results in 10g
Hi,
We have created a calculated column in BMM layer as x=Sum(Amount)/sum(Distinct Members).
In the report, individually it is showing correct results but when we are calculating "Total By" it is showing wrong total.This is because of while calculating totals it is taking the formula as x=Sum(Amount)/sum(Members).
Aggregations are kept as default for all the columns in the report .
Please help me to solve this issue.For this calculated column set aggregation level as sum.
-
NonLinearFitWithMaxIters does not give correct results for phase
Dear all,
I am trying to fit a sin cuve with NonLinearFitWithMaxIters function of labwindows, but the results given by this function are dispersed a lot (the function does not give same results).
In fact, I have two waveforms signals v and i (of 104 points), and I find the phase between the two signals with NonLinearFitWithMaxIters.
The two singals v and i are measured with an osciloscope.
I use the following fit functions :
v=p1*sin(wt+p2) ;
i=p3*sin(wt+p4) ;
I use the NonLinearFitWithMaxIters function to fit the data and to have the parameters p1, p2, p3, p4. Then, the phase is claculated as follow phase=p4-p3.
The problem is that the phase calculted between the two signals (v and i) is different for each run for the same conditions.
In fact, for a same condition, I measure different times the signals v and i, and I calculate the phase p4-p3, using NonLinearFitWithMaxIters. The goal is to calculate a mean of phases for the same condition. For example, there are cases where the phase=-5 degree, and other cases when phase=12 degree.
For ten measures of v and i, the phase calculated is different. I get a big dispersion between the phases.
I would like to know please why I have a big difference in phases calculated with the same condition?whern using NonLinearFitWithMaxIters.
I read that this function does not give all time the correct results, is there a way to know when the results are not corrects and when they are correct ?
And is there any solution to find accuratly the phase between the two waveforms.
Thank you for your precious answer.The pseudocode which I am using is :
v_err=NonLinearFitWithMaxIters(array_x,array_v,v_y_fit,1252,100,sinus,v_coef,2,&v_mean_squareError);
The fit function is
double sinus(double x, double a[],int noef){
return (a[0]*sin((w*x)+a[1]));
I use the same inital coeficient of v_coef for each run :
v_coef[0]=0.03;
v_coef[1]=0.2;
These coeficient are choosen arbitrary.
In this case, the number of points of the data is 1252 (the data of array_v).
The number of iterations is 100.
For the array_x, the distance between adjacents values of the array is dt=0.4*1e-9(difference between array_x[i] anv array_x[i+1]=dt=0.4*1e-9 ).
for (i=0;i<1252;i++){
array_x[i]=i*(0.4*1e-9);
The means square error returnned by the function when it is complished is small, of the order of 0,001.
I read the help
« From the help:
You must pass a pointer to the nonlinear function f(x,a) along with a set of initial guess coefficients a. NonLinearFitWithMaxIters does not always give the correct answer. The correct output sometimes depends on the initial choice of a. It is very important to verify the final result.
That means that the function cannot be used, as it does not give correct results. How
can we check if the results are good or not ? in my case.
I think that in my case, the function does not give correct results, but how can I check if the results are good, or not ? The mean square error is small. -
.bat file result not giving correctly in data services
Hi ,
I am using .bat file to count the number of files in the folder. I want to capture the value of the number of files.
I have written small .bat file as shown below
@echo off
setlocal enableextensions
CD %1
set cnt=0
for %%A in (*) do set /a cnt+=1
echo File count = %cnt%
endlocal
I have used this batch file in the script as shown below.
$COUNT =exec('D:\\test.bat', 'D:\\docs',8);
print($COUNT);
In the above $COUNT is varchar(255).
actually i have only 11 file sin the docs folder . But it is giving the 442 files.
If I run the same batch file in the windows cmd command I am getting the correct result.
Please let me know what will be issues?
I am unable figure out the issues for weird result when I am using DS.
Please help me in this issue.
Thanks & Regards,
Ramana.Hi,
While executing the batch file it is taking the Data services installation directory path as shown below.
14504 6420 PRINTFN 3/30/2015 9:40:10 AM 0: C:\Program Files (x86)\SAP BusinessObjects\Data Services\bin File count = 442
I have changed the the batch file with two parameters. one for changing directory and another one for changing the folder.
Now my batch file looks like this.
@echo off
setlocal enableextensions
%1:
CD %2
echo %CD%
set cnt=0
for %%A in (*) do set /a cnt+=1
echo File count = %cnt%
endlocal
Then my script is like this .
$COUNT =exec('D:\\test.bat', ' D D:\\docs',8);
print($COUNT);
Now it is giving the expected result as shown below.
14700 13912 PRINTFN 3/30/2015 9:52:18 AM 0: D:\Docs File count = 11
Thanks & Regards,
Ramana. -
Output looking fine in display queue but error while using test tab
Hi,
Iam working on an IDOC to XML scenario using multimapping.Here in my scenario i have a field in idoc namely E1PLOGI.
Here the output is two different types of miles.Here the mapping should generate different number of files based on the number of times E1PLOGI occurs.Here in the IDOC i have taken the particular field(E1PLOGI ) occurs six times.
Here the mapping rule is same for the two filestypes.But here for the first file type it is creating six files.But in the second case it is always creating 1 file only.
When i click on display queue and see it shows the correct vaues(six constant values which i mapped to the node for every existence of E1PLOGI) but when i go to test tab and test it creates only one instead of six.
Please help me with this problem.
Thanks,
BhargavHI Bhargav,
May be this is the problem of queue, first u go to <b>Tcode smq2</b> ( for inbound messages) in ur R/3 system and clean up this queue , after this send your message again, hopefully it will solve your problem.
regards
HONEY
Maybe you are looking for
-
Challenging:How can I COMBINE two CWIMAQPoints Collection in one - URGENT
I have two CWIMAQPoints collections and I want to combine them in one CWIMAQPoints in order to pass it as an argument to another function. In order to do this I would like to avoid using a loop in where I would add each item one-by-one. I would appre
-
IPhone G3 Battery and Performance Issues
I have a 16GB iPhone G3 (OS 3.1.2). It's only about 6 months old though it is the 4th iPhone G3 I've had since Sept '08. The others have been replaced by Apple for battery failure, modem failure and inability to stay 'connected' to a charging device
-
Error while relasing biling doc to accounting
Hi, I am getting this strange error while releasing the billing documents to Accouting. We are in the initial phease of our realization and have nor been able to release any billing docs so far because of this error. I am missing something in the mat
-
Is their any way to downgrade from ios 6 back to ios 5.1.1
is their any way to downgrade from ios 6 back to 5.1.1 i am not happy with ios6 its annyoing and so buggy i cant transfure music to my ipod and it laggs like ****! is their any way i can get it back to 5.1.1 i have a Ipod 4G (8Gb) i recently only got
-
Clarification of iPhoto/Photo Stream
Hi, I am having difficulty understanding how iPhoto handles photos taken on an iOS device(iPhone or iPad). Currently I have my iPhoto set to do an automatic import when taking picture. I take picture on iPhone, it shows up on iPad photo stream. It