Enterprise Manager does not give correct results

I am using version 9.0.2.0.1 core edition(oc4j & web-cache).
My application consists of business components, java beans and jsp. It is running fine.
Oracle enterprise manager is not giving correct results of memory/cpu usage by oc4j_home and bc4j.
Some times it does not gives result, when i refresh it twice or thrice it shows results.
But results are not correct. On each refresh it gives different results.
Then it is very hard to find which resuslt is correct.
waiting for response,
Tahir.

i have been using 9iAS versions 102*, 90200, 90201, and now using 903.
As stated above, some times the results for oc4j_home is displayed.
But the memory/cpu usage for bc4j is never shown.
Also, its radio-button is always disabled. while its status is "running".
On BC4J page, it also shows results of application modules created. But these results are usually wrong.
How bc4j will be enabled, and how its memory results can be get ???
Tahir.

Similar Messages

  • NonLinearFitWithMaxIters does not give correct results for phase

    Dear all,
    I am trying to fit a sin cuve with NonLinearFitWithMaxIters function of labwindows, but the results given by this function are dispersed a lot (the function does not give same results).
    In fact, I have two waveforms signals v and i (of 104 points), and I  find the phase between the two signals with NonLinearFitWithMaxIters.
    The two singals v and i are  measured with an osciloscope.
    I use the following fit functions :
    v=p1*sin(wt+p2) ;
    i=p3*sin(wt+p4) ;
    I use the NonLinearFitWithMaxIters function to fit the data and to have the parameters  p1, p2, p3, p4. Then, the phase is claculated as follow phase=p4-p3.
    The problem is that the phase calculted between the two signals (v and i) is different for each run for the same conditions.
    In fact, for a same condition, I measure different times the signals v and i, and I calculate the phase p4-p3, using NonLinearFitWithMaxIters. The goal is to calculate a mean of phases for the same condition. For example, there are cases where the phase=-5 degree, and other cases when phase=12 degree.
    For ten measures of v and i, the phase calculated is different. I get a big dispersion between the phases.
    I would like to know please why I have a big difference in phases calculated with the same condition?whern using NonLinearFitWithMaxIters.
    I read that this function does not give all time the correct results, is there a way to know when the results are not corrects and when they are correct ?
    And is there any solution to find accuratly the phase between the two waveforms.
    Thank you for your precious answer.

    The pseudocode which I am using is :
    v_err=NonLinearFitWithMaxIters(array_x,array_v,v_y_fit,1252,100,sinus,v_coef,2,&v_mean_squareError);
    The fit function is
    double sinus(double x, double a[],int noef){
        return (a[0]*sin((w*x)+a[1]));
     I use the same inital coeficient of v_coef for each run :     
    v_coef[0]=0.03;
    v_coef[1]=0.2;
    These coeficient are choosen arbitrary.
    In this case, the number of points of the data is 1252 (the data of array_v).
    The number of iterations is 100.
    For the array_x, the distance between adjacents values of the array is dt=0.4*1e-9(difference between array_x[i] anv array_x[i+1]=dt=0.4*1e-9 ).
    for (i=0;i<1252;i++){
    array_x[i]=i*(0.4*1e-9);
    The means square error returnned by the function when it is complished is  small, of the order of 0,001.
    I read the help
    « From the help:
    You must pass a pointer to the nonlinear function f(x,a) along with a set of initial guess coefficients a. NonLinearFitWithMaxIters does not always give the correct answer. The correct output sometimes depends on the initial choice of a. It is very important to verify the final result.
    That means that the function cannot be used, as it does not give correct results. How
    can we check if the results are good or not ? in my case.
    I think that in my case, the function does not give correct results, but how can I check if the results are good, or not ? The mean square error is small.

  • Oracle Enterprise Manager does not displaying images

    Hi folks, I installed Oracle SOA Suite 10.1.3.0 and after that I did apllied patch 10.1.3.4. The patch was applied successfully, but when I invoke Enterprise Manager all images does not rendered. After analisying I could see that "ascontrol" application has two virtual-path pointing two real-path but it does not exists into file system. Enterprise MAnager console does not load CSS file and images because it.
    I download OC4J 10.1.3.4 standalone version and after configuration I access Enterprise Manager via browser, but OC4J standalone works fine.
    Anyone can help me ???
    Cheers.

    The listener port may be misconfigured,
    You can reconfigure with
    emca -config dbcontrol db
    Enter the following information:
    Database SID: XXX
    Database Control is already configured for the database XXX
    You have chosen to configure Database Control for managing the database XXX
    This will remove the existing configuration and the default settings and perform a fresh configuration
    Do you wish to continue? [yes(Y)/no(N)]: Y
    Listener port number: 1521
    Password for SYS user:
    Password for DBSNMP user:
    Password for SYSMAN user:
    Email address for notifications (optional):
    Outgoing Mail (SMTP) server for notifications (optional):
    You have specified the following settings
    Database ORACLE_HOME ................ /oracle/product/10.2.0
    Database hostname ................ xxxxx
    Listener port number ................ 1521
    Database SID ................ XXX
    Email address for notifications ...............
    Outgoing Mail (SMTP) server for notifications ...............
    Do you wish to continue? [yes(Y)/no(N)]: y
    24.08.2008 01:58:44 oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /oracle/product/10.2.0/cfgtoollogs/emca/EPA/emca_2008-08-24_01-58-01-AM.log.
    24.08.2008 01:58:46 oracle.sysman.emcp.util.DBControlUtil stopOMS
    INFO: Stopping Database Control (this may take a while) ...
    24.08.2008 01:58:57 oracle.sysman.emcp.util.DBControlUtil startOMS
    INFO: Starting Database Control (this may take a while) ...
    24.08.2008 02:00:39 oracle.sysman.emcp.EMDBPostConfig performConfiguration
    INFO: Database Control started successfully
    24.08.2008 02:00:39 oracle.sysman.emcp.EMDBPostConfig performConfiguration
    INFO: >>>>>>>>>>> The Database Control URL is http://xxxxx:1158/em <<<<<<<<<<<
    Enterprise Manager configuration completed successfully
    FINISHED EMCA at 24.08.2008 02:00:39

  • Timestamp when saved in text file and reloaded does not give correct dates

    Hello
    I am struggling with time stamp. I have almost corrected the problem but it is not as good as I expect it to be.
    I have data in the main vi which logs into text file with time stamp for everyday results logs.
    I then pull all this data to display on waveform graph with the performance data on y axis and time stamp on x axis.
    I convert the time stamp data from string back to time stamp using scan from function in string pallette. When I run the waveform graph vi. The time stamp data is not correct one. I see year values beginning 1974 etc. I change these values to 2011 and the correct dates and then could see the accurate logged data from data logger but I would like to have the starting date in my logged file the left most date on x-axis. I try modify dates in display format section of waveform graph but I think it gives the values in seconds which doesn't make much sense to me. Is it possible to automatically set the starting value of the graph as the first date in the logged file? I am new with using time stamps. Any feedback will be appreciated.
    Kind Regards
    Austin

    Hi Austin,
    "Is it possible to automatically set the starting value of the graph as the first date in the logged file?"
    Sure: Use autoscaling, format x-axis as time and use waveforms with correct t0 value...
    For all other questions you should attach a VI to show your current state of programming!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • ITSM Search on status with "is not" gives incorrect results due to SLA statuses

    Hi,
    When executing a search on Solution Manager ITSM tickets, on the search criterion Status and with operator "is not", the result list does not give correct results.
    For example, an incident with status "Confirmed IRT Exceeded" does show up when searching with criterion "Status is not Confirmed".
    Is there any solution for this behaviour?
    Kind Regards,
    Joyca

    Hi Vivek,
    Thanks for the Knowledge Article.
    The content of the document would indeed help if we only wanted to find "not confirmed" tickets.
    However, the same thing is happening on other statuses. For example searching for "status is not proposed solution" is still not possible with the descriptions in the knowledge document, since the user status "proposed solution" is linked to system status "in process" (I1003), like all the other in-between user statuses such as "customer action" and "in process" etc.
    The only workaround that I see is to use only "is" as operator and never "is not". However, the underlying problem remains. I think it should be possible to use also "is not" without having issues due to those SLA statuses...
    Kr,
    Joyca

  • TS1702 When I try to update an App I am getting my old email address (which no longer works) and when I put in its password it says password or username is wrong. but it does not give me an option to put in my new user name. How can I correct this.

    When I try to update an App I am getting my old email address (which no longer works) and when I put in its password it says password or username is wrong. but it does not give me an option to put in my new user name. How can I correct this.

    What you are getting is the AppleID (AppleID can be an email adress) used at the time of the purchase of this app.  It is an identifiant allowing Apple to link your purchase to your account.
    If you want to manage associated email, you can go at https://appleid.apple.com but the AppleID could never be modified.  
    I do not know if in your case, it is just that you no longer use your old email address or that you actually a 2 AppleID.  In any case, you will have to remember the password related to the account used for your purchase.  If you don't, just use the link above to try to retreive your password.

  • HT1212 My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity.

    My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity.  How do I get the window to enter my pass code?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I am using FF 5.0.1. The English spellchecker add on does not work.It will underline the misspelled word but does not give you the correct spelling choice.

    I did not upgrade to 4.0 because I did not like it.I thought I was upgrading finally to 4.0 assuming at this date they had fixed all the bugs and updated the add ons.
    I downloaded the latest version and love it, love it except the one add on that I use more than anything does not work properly.:-(
    Please notify the developer of this issue.

    "SafeBrowser'',
    No it does NOT show up as I said before the ONLY option is "paste" there are NO suggestions showing up.
    As I said before,I have used this same add on for many years and earlier versions and have had no problems until version FF5.01.
    ''cor-el'',
    I have already done all that prior to posting here.
    Even as I type this response the spell check add on puts a red squigly line under your screen names but does not give me any suggestions.
    I am frustrated beyond belief because I am a faithful and dedicated user of this browser and I am going to just roll back to a older version until this silly issue is resolved.
    I appreciate all your help but I suppose until the person who developed this add on does something to make it compatible with FF5.01 I will not be using it.
    I apologize for any misspelled words but my spell check extension is not working properly. :-(

  • Highlighter Theme does not give color long page names correctly in Navigati

    Hi, All. I'm using the Highlighter theme. When I use a page name like "Short" the yellow highlight on the navigation bar works fine. However, when I use a page name like "A rather longer set here" the gold color is much too short.
    In previous versions of iweb it worked fine. It does not work correctly with 2.02.
    Any ideas on how to fix it?
    Thanks!

    Either use a shorter title of stretch the Highlighter_highlight.png image.
    You'll find the image in the pagename_files folder.
    You can also change the image in the iWeb package.
    Applications > iWeb > Contents > Resources > Themes > Highlighter.webtheme > Shared
    To show the contents control-click the bold files and choose +Show Package content+.
    You need Administrator rights to edit the contents in iWeb.

  • HT5787 what happens when someone sell second iphone and does not give you the correct password

    what happens when someone sell second iphone and does not give you

    If you are talking about activation lock you are out of luck. Without that information you cannot activate the device and have just lost your money. Unless you can find the person and get your money back.

  • Enterprise Manager is not able to connect to the database instance....

    Hi all,
    Currently i'm facing a big issue here.
    I have install the Oracle 10g on Window 2003 SE.
    And currently the Enterprise manager is not be able to conenct to the database and my database is still running.With my listener is up.
    But from the Enterprise manager's it show that everythg is down.
    and when i try to restart it,i ask for os id and password and dbuser and dbpassword.
    frm the SQL plus,i can easily startup and shutdown the database.
    So i would like to know i can rectify this problem.
    please kindly help me.I have post the setting of the databse as below
    tnsnames.ora
    ==========
    # Filename......: tnsnames.ora
    # Created.......: created by SAP AG, R/3 Rel. >= 6.10
    # Name..........:
    # Date..........:
    # @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
    SDB.WORLD=
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = SAP_SOLMAN)
    (PORT = 1527)
    (CONNECT_DATA =
    (SID = SDB)
    (GLOBAL_NAME = SDB.WORLD)
    sqlnet.ora
    ========
    # sqlnet.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\sqlnet.ora
    # Generated by Oracle configuration tools.
    # 05.01.06 set to default
    #TCP.NODELAY=YES
    # 05.01.06 set to 32768
    # 05.01.06 unsorported parameter now
    #NAME.DEFAULT_ZONE = WORLD
    # 05.01.06 set the default to 10
    # Filename......: sqlnet.ora
    # Created.......: created by SAP AG, R/3 Rel. >= 6.10
    # Name..........:
    # Date..........:
    # @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/SQLNET.ORA#4 $
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT, HOSTNAME, LDAP)
    NAMES.DEFAULT_DOMAIN = WORLD
    DEFAULT_SDU_SIZE = 32768
    SQLNET.EXPIRE_TIME = 10
    Listener.ora
    =========
    # Filename......: listener.ora
    # Created.......: created by SAP AG, R/3 Rel. >= 6.10
    # Name..........:
    # Date..........:
    # @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
    (ADDRESS_LIST =
    (ADDRESS =
    (PROTOCOL = IPC)
    (KEY = SDB.WORLD)
    (ADDRESS=
    (PROTOCOL = IPC)
    (KEY = SDB)
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = SAP_SOLMAN)
    (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = SDB)
    (ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
    Listener status
    ===========
    LSNRCTL> status
    Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=SDB.WORLD))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
    ction
    Start Date 15-AUG-2006 15:14:48
    Uptime 0 days 2 hr. 43 min. 31 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File E:\oracle\product\10.2.0\db_1\network\admin\listener.o
    ra
    Listener Log File E:\oracle\product\10.2.0\db_1\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\SDB.WORLDipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\SDBipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SAP_solman)(PORT=1527)))
    Services Summary...
    Service "SDB" has 1 instance(s).
    Instance "SDB", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    emoms.log
    ========
    2006-08-15 18:03:20,562 [HttpRequestHandler-2254042] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
    2006-08-15 18:03:21,547 [HttpRequestHandler-2254042] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
    2006-08-15 18:03:21,547 [HttpRequestHandler-2254042] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: The Network Adapter could not establish the connection
    java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:254)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:386)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:493)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:164)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:767)
         at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:324)
         at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:114)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:694)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:540)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:346)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:324)
         at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:296)
         at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:423)
         at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:156)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:605)
         at oracle.sysman.emdrep.receiver.OMSHandshake.getParameterFromDB(OMSHandshake.java:387)
         at oracle.sysman.emdrep.receiver.OMSHandshake.getMaxAgentCompatVer(OMSHandshake.java:369)
         at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:794)
         at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:648)
         at oracle.sysman.emdrep.receiver.FxferRecv.doGet(FxferRecv.java:658)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    2006-08-15 18:03:22,531 [HttpRequestHandler-2254042] ERROR eml.OMSHandshake getParameterFromDB.402 - Io exception: The Network Adapter could not establish the connection
    2006-08-15 18:03:22,531 [HttpRequestHandler-2254042] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://SAP_solman:3938/emd/main)(ERROR = INTERNAL_ERROR)
    2006-08-15 18:03:35,547 [HttpRequestHandler-9249408] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
    2006-08-15 18:03:35,547 [HttpRequestHandler-9249408] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: The Network Adapter could not establish the connection
    java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:254)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:386)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:493)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:164)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:767)
         at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:324)
         at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:114)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:694)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:540)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:346)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:324)
         at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:296)
         at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:423)
         at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:156)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:605)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.getRepositoryVersionAndMode(ConnectionService.java:368)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.verifyRepositoryEx(ConnectionService.java:395)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:144)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    2006-08-15 18:03:36,531 [HttpRequestHandler-9249408] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
    2006-08-15 18:03:36,531 [EMUI_18_03_36_/console/aboutApplication] ERROR em.console doGet.311 - java.lang.IllegalStateException: Response has already been committed
    java.lang.IllegalStateException: Response has already been committed
         at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1901)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:211)
         at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:773)
         at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:396)
         at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:688)
         at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:291)
         at oracle.sysman.eml.app.Console.doGet(Console.java:135)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
         at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:123)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    OracleDBConsoleSDBsrvc.log
    ======================
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/09/06 15:11:59 Start pending...
    08/09/06 15:11:59 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/09/06 15:12:04 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/09/06 15:12:04 Tracking process launch...
    08/09/06 15:12:41 Received exitCode 3 from emctl istatus
    08/09/06 15:12:41 dbconsole started
    08/11/06 08:46:03 Recieved ServCtrlHdlr command, 5
    08/11/06 08:46:03 Stopping dbconsole
    08/11/06 08:46:03 Launching stop EMD process...
    08/11/06 08:46:03 Waiting for stop EMD process to exit. numRetries=74
    08/11/06 08:46:06 Stop process has exited with exitCode: 0
    08/11/06 08:46:06 Waiting for emwd process to exit. numRetries=74
    08/11/06 08:46:06 Watchdog process exited with exit code 15
    08/11/06 08:46:06 Signal Shutdown event.
    08/11/06 08:46:06 Shutdown thread exited.
    08/11/06 08:46:06 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/11/06 08:45:17 Start pending...
    08/11/06 08:45:17 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/11/06 08:45:26 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/11/06 08:45:26 Tracking process launch...
    08/11/06 08:46:11 Received exitCode 3 from emctl istatus
    08/11/06 08:46:11 dbconsole started
    08/11/06 08:48:58 Recieved ServCtrlHdlr command, 5
    08/11/06 08:48:58 Stopping dbconsole
    08/11/06 08:48:58 Launching stop EMD process...
    08/11/06 08:48:58 Waiting for stop EMD process to exit. numRetries=74
    08/11/06 08:49:02 Stop process has exited with exitCode: 0
    08/11/06 08:49:02 Waiting for emwd process to exit. numRetries=74
    08/11/06 08:49:02 Watchdog process exited with exit code 15
    08/11/06 08:49:02 Signal Shutdown event.
    08/11/06 08:49:02 Shutdown thread exited.
    08/11/06 08:49:02 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/11/06 08:53:20 Start pending...
    08/11/06 08:53:20 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/11/06 08:53:29 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/11/06 08:53:29 Tracking process launch...
    08/11/06 08:54:14 Received exitCode 3 from emctl istatus
    08/11/06 08:54:14 dbconsole started
    08/11/06 11:37:30 Recieved ServCtrlHdlr command, 5
    08/11/06 11:37:30 Stopping dbconsole
    08/11/06 11:37:30 Launching stop EMD process...
    08/11/06 11:37:30 Waiting for stop EMD process to exit. numRetries=74
    08/11/06 11:37:34 Stop process has exited with exitCode: 0
    08/11/06 11:37:34 Waiting for emwd process to exit. numRetries=74
    08/11/06 11:37:34 Watchdog process exited with exit code 15
    08/11/06 11:37:34 Signal Shutdown event.
    08/11/06 11:37:34 Shutdown thread exited.
    08/11/06 11:37:34 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/11/06 11:36:48 Start pending...
    08/11/06 11:36:48 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/11/06 11:36:56 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/11/06 11:36:56 Tracking process launch...
    08/11/06 11:37:41 Received exitCode 3 from emctl istatus
    08/11/06 11:37:41 dbconsole started
    08/15/06 09:31:52 Recieved ServCtrlHdlr command, 5
    08/15/06 09:31:52 Stopping dbconsole
    08/15/06 09:31:52 Launching stop EMD process...
    08/15/06 09:31:52 Waiting for stop EMD process to exit. numRetries=74
    08/15/06 09:31:56 Stop process has exited with exitCode: 0
    08/15/06 09:31:56 Waiting for emwd process to exit. numRetries=74
    08/15/06 09:31:56 Watchdog process exited with exit code 15
    08/15/06 09:31:56 Signal Shutdown event.
    08/15/06 09:31:56 Shutdown thread exited.
    08/15/06 09:31:56 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/15/06 09:31:06 Start pending...
    08/15/06 09:31:06 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/15/06 09:31:14 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/15/06 09:31:14 Tracking process launch...
    08/15/06 09:31:49 Did not hear back from emctl istatus.
    08/15/06 09:31:49 Waiting a further 5 secs...
    08/15/06 09:31:51 Received exitCode 3 from emctl istatus
    08/15/06 09:31:51 dbconsole started
    08/15/06 15:15:31 Recieved ServCtrlHdlr command, 5
    08/15/06 15:15:31 Stopping dbconsole
    08/15/06 15:15:31 Launching stop EMD process...
    08/15/06 15:15:31 Waiting for stop EMD process to exit. numRetries=74
    08/15/06 15:15:34 Stop process has exited with exitCode: 0
    08/15/06 15:15:34 Waiting for emwd process to exit. numRetries=74
    08/15/06 15:15:34 Watchdog process exited with exit code 15
    08/15/06 15:15:34 Signal Shutdown event.
    08/15/06 15:15:34 Shutdown thread exited.
    08/15/06 15:15:34 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/15/06 15:14:46 Start pending...
    08/15/06 15:14:46 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/15/06 15:14:54 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/15/06 15:14:54 Tracking process launch...
    08/15/06 15:15:29 Did not hear back from emctl istatus.
    08/15/06 15:15:29 Waiting a further 5 secs...
    08/15/06 15:15:32 Received exitCode 3 from emctl istatus
    08/15/06 15:15:32 dbconsole started
    Command prompt for emctls status
    =========================
    E:\oracle\product\10.2.0\db_1\BIN>emctl status
    Environment variable ORACLE_SID not defined. Please define it.
    emd.properties
    ===========
    # perl executable directory
    perlBin=E:\oracle\product\10.2.0\db_1\perl\5.8.3\bin\MSWin32-x86-multi-thread
    # script directory
    scriptsDir=E:\oracle\product\10.2.0\db_1/sysman/admin/scripts
    # emd Root directory(read-only location). Metrics should not create files
    # under this directory
    emdRoot=E:\oracle\product\10.2.0\db_1
    # agent Root directory(writeable).
    # Use this property to base any temporary file creation.
    agentStateDir=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB
    # Chronos root directory
    chronosRoot=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/emd/chronos
    # OMS Upload URL
    # if there is no receiving OMS or if you wish to disable the UploadManager
    # please set this value to empty or comment out below line
    REPOSITORY_URL=http://SAP_solman:5500/em/upload/
    # Proxy settings used for fetchlets. not applicable for uploader.
    #proxyHost=www-proxy.us.oracle.com
    #proxyPort=80
    #dontProxyFor=.us.oracle.com
    # If it is necessary to go through an http proxy server to get to the
    # repository, uncomment the following two lines
    #REPOSITORY_PROXYHOST=
    #REPOSITORY_PROXYPORT=
    #REPOSITORY_PROXYREALM=%EM_REPOS_PROXYREALM%
    #REPOSITORY_PROXYUSER=%EM_REPOS_PROXYUSER%
    #REPOSITORY_PROXYPWD=%EM_REPOS_PROXYPWD%
    # This string is used by the agent to connect to remote targets
    # ***IMPORTANT*** Do not change the contents of this setting. Only the
    # install should modify this value.
    agentSeed=1329576760
    # This string is used by the agent to determine which algorithm to use for encrypted data
    # The string value will be same as the release version
    agentVersion=10.1.0.4.0
    # How long, in minutes, collector will wait until next load.
    UploadInterval=5
    # If an upload fails, we want to backoff by UploadFailBackoff
    # percentage more each time for each successive upload failure
    # e.g. if we start the retry at 1 minute. If we fail in our next
    # upload attempt, we try again 1minute 12 seconds later etc.
    UploadFailBackoffPct= 20
    # Maximum amount of time, in seconds, upload will wait for response from
    # repository before timing out.
    # 0 means infinite.
    UploadTimeout=1800
    # Timeout for upload a file, HealthMonitor will abort the EMD process if
    # UploadManager does not finish uploading one file within this time
    # Unit is minite, the default value is 1 hour ( 15 Min)
    #UploadMaxTime=15
    # How big the file the collector will upload (in KB)
    # the actual file size could be slightly bigger.
    # This is only a guidance.
    UploadFileSize=2048
    # The maximum number of megabytes(MB) the upload manager will support in the
    # upload directory before temporarily being disabled
    UploadMaxBytesXML=50
    # The maximum number of files the upload manager will support in the
    # upload directory before temporarily being disabled
    UploadMaxNumberXML=5000
    # The maximum amount (%) of disk space that can be used on the EMD filesystem
    # before the following is disabled:
    # - Collection of data (upload manager)
    # - Logging and tracing
    UploadMaxDiskUsedPct=98
    # The amount (%) of disk space that can be used on the EMD filesystem
    # before the following is re-enabled after being disabled previously:
    # - Collection of data (upload manager)
    # - Logging and tracing
    UploadMaxDiskUsedPctFloor=95
    # Time out for the Agent to think that the access to the database could be
    # hung. The Agent would not allow more threads to go and hang with a database
    # if any one access to the database does not return within DbHangTimeout
    # seconds.
    # The more the timeout more the possibility of allowing more threads
    # to be hung in the EMD with a bad database.it is specified in seconds.
    #DbHangTimeout=200
    # The script to run if disk space usage exceeds parameters or if certain other
    # error conditions occur.
    #emdFailureScript=emdfail.command
    # The location of the file that contains the root certificate.
    emdRootCertLoc=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/b64LocalCertificate.txt
    internetCertLoc=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/b64InternetCertificate.txt
    # The download URL for the EMD Oracle Wallet and its local file location.
    # Note: Ensure that this URL references a valid port number at which the
    # console is available on http
    emdWalletSrcUrl=http://SAP_solman:5500/em/wallets/emd
    emdWalletDest=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/server
    # The email address for out-of-band notifications
    emd_email_address=
    emd_email_gateway=
    # The return email address for out-of-band notifications
    emd_from_email_address=
    # EMD main servlet URL
    EMD_URL=http://SAP_solman:3938/emd/main
    # Whether the EMD should listen on all NICs on the current host (the default)
    # or just the NIC associated with the hostname in EMD_URL
    AgentListenOnAllNICs=TRUE
    # This parameter indicates the thread model to use. uncomment one of the
    # following ThreadPoolModel line to indicate the model, agent need to use.
    # SMALL if number of targets is less than 11.
    # MEDIUM if number of targets is from 11 to 50.
    # LARGE if number of targets is greater than 50.
    # This parameter can be overriden by 'MaxThreads' which indicates the maximum
    # number of threads that CEMD can have running at any point of time. User can
    # mostly use the other parameter ThreadPoolModel to indicate what model for the
    # agent to use.
    # ThreadPoolModel = SMALL
    # ThreadPoolModel = MEDIUM
    # ThreadPoolModel = LARGE
    # This parameter indicates the stack size, threads have to be created with.
    # we can set it to 0 to use the OS default value.
    # In some version of solaris(such as 2.9 ) specify a stack size may cause Java Hotspot warning
    # when JVM is used.
    NormalThreadStackSize=0
    #Signals that users want to ignore.
    #It can be one or combination of SIGTERM, SIGINT
    # The signals can listed with ',' as delimiter.
    #IgnoreSignals=
    # This property is NO LONGER USED for host config collection (instead, hostConfigClasspath is used).
    # If noone else uses it, it can be removed.
    ouiLoc=E:\oracle\product\10.2.0\db_1/oui
    # Classpath for host config collection
    # VERY IMPORTANT NOTE: If you change the host config classpath entries in this section, you HAVE
    # to change the HOST_CONFIG_TEST_CLASSPATH entry in the utl/emdwqaenv file too.
    # NOTE: if the location of emd_java.jar and/or log4j-core.jar is changed
    # make sure that appropriate changes are also made
    # to the CLASSPATH variable in this file if necessary
    # PORTING NOTE: Check OUI-required jar files for OUI APIs to work. They could be different on your platform.
    # Also, our version of xmlparserv2.jar must be compatible with the one OUI expects (both OUI and ECM use XML parser).
    hostConfigClasspath=E:\oracle\product\10.2.0\db_1/oui/jlib/xmlparserv2.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/OraInstaller.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/srvm.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/share.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/emd_java.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/log4j-core.jar
    # JAVA HOME required for JavaExt metric calls
    JAVA_HOME=E:\oracle\product\10.2.0\db_1/jdk/jre
    # CLASSPATH required for JavaExt metric calls
    CLASSPATH=E:\oracle\product\10.2.0\db_1/sysman/jlib/emd_java.jar;E:\oracle\product\10.2.0\db_1/opmn/lib/ons.jar;E:\oracle\product\10.2.0\db_1/lib/xmlparserv2.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/log4j-core.jar;E:\oracle\product\10.2.0\db_1/oc4j/j2ee/home/lib/http_client.jar;E:\oracle\product\10.2.0\db_1/lib/dms.jar;E:\oracle\product\10.2.0\db_1/lib/dmsEmd.jar;E:\oracle\product\10.2.0\db_1/jlib/share.jar;E:\oracle\product\10.2.0\db_1/jdbc/lib/ojdbc14dms.jar;E:\oracle\product\10.2.0\db_1/jlib/jssl-1_1.jar;E:\oracle\product\10.2.0\db_1/jlib/javax-ssl-1_1.jar;E:\oracle\product\10.2.0\db_1/jlib/ojmisc.jar;E:\oracle\product\10.2.0\db_1/lib/em_test.jar;E:\oracle\product\10.2.0\db_1/jlib/ojmisc.jar;E:\oracle\product\10.2.0\db_1/jlib/repository.jar;E:\oracle\product\10.2.0\db_1/opmn/lib/optic.jar
    # this is the java option
    #JAVA_OPTIONS=-Xmx128m
    # These are the optional Java flags for the in-process Java
    # Native Interface (JNI)
    agentJavaDefines=-Doracle.dms.refresh.wait.time=1000 -DUrlTiming.UseJSSE=true
    # When set to true, the emd.log and emd.trc file will be appended by a pid
    # For example:
    # emd_15789.log
    # emd_15789.trc
    # By default, it is not set for regression test purpose.
    # After installed, please uncomment this line because when EMD is restarted,
    # previous log information will be lost if not set to true.
    #LogFileWithPID=true
    # Default log file maximum size before rolling in Kilobytes
    LogFileMaxSize=4096
    # Maximum number of log file roll files to maintain before deletion
    LogFileMaxRolls=4
    # Default trace file maximum size before rolling in Kilobytes
    TrcFileMaxSize=4096
    # Maximum number of trace file roll files to maintain before deletion
    TrcFileMaxRolls=4
    # To enable the metric browser, uncomment the following line
    # This is a reloadable parameter
    #enableMetricBrowser=true
    # To disable Remote operations (non-reachable agent) uncomment the following
    # line:
    #disableRemoteOperations=true
    # add an additional admin path from which the agent will read additional
    # target metadata. The specified path should have the mandatory 4 directories
    # under it. 1. metadata 2. scripts 3. default_collection 4. discover
    #altAdminPath=<additional admin path>
    # The health monitor executes callbacks in a separate thread. if for some
    # reason the threads spawned from health monitor to execute callbacks are
    # hung, the agent could run out of resource and freeze.
    # so when the current thread count spawned from the Health monitor reaches
    # this limit, the agent is bounced. the default is set to 5.
    #MaxHealthMonitorThreads=5
    # dynamicPropsComputeTimeout default to 30s
    dynamicPropsComputeTimeout=60
    # emagent perl tracing levels
    # supported levels: DEBUG, INFO, WARN, ERROR
    # default level is ERROR
    EMAGENT_PERL_TRACE_LEVEL=ERROR
    # other optional parameters for perl tracing
    # EMAGENT_PERL_TRACE_DIR default to $ORACLE_HOME/sysman/log
    #EMAGENT_PERL_TRACE_DIR=
    # EMAGENT_PERL_TRACE_FILESIZE default to 5M
    #EMAGENT_PERL_TRACE_FILESIZE=5
    # this section define the logging level for each component,
    # it is "reloadable", you can change the level at runtime to reset
    # the logging level, but if you remove the line, it will not be
    # changed.
    tracelevel.main=WARN
    tracelevel.emSDK.xml=WARN
    tracelevel.emSDK.utl=WARN
    tracelevel.ResMonitor=WARN
    tracelevel.Dispatcher=WARN
    tracelevel.ThreadPool=WARN
    tracelevel.pingManager=WARN
    tracelevel.collector=WARN
    tracelevel.http=WARN
    tracelevel.ssl=WARN
    tracelevel.ssl.io=WARN
    tracelevel.blackouts=WARN
    tracelevel.upload=WARN
    tracelevel.command=WARN
    tracelevel.reload=WARN
    tracelevel.scheduler=WARN
    tracelevel.Authentication=WARN
    tracelevel.metadata=WARN
    tracelevel.targets=WARN
    tracelevel.TargetManager=WARN
    tracelevel.engine=WARN
    tracelevel.javaproc=WARN
    tracelevel.vpxoci=WARN
    tracelevel.javavm=WARN
    tracelevel.fetchlets=WARN
    tracelevel.fetchlets.os=WARN
    tracelevel.fetchlets.osline=WARN
    tracelevel.fetchlets.oslinetok=WARN
    tracelevel.fetchlets.UDM=WARN
    tracelevel.fetchlets.sql=WARN
    tracelevel.fetchlets.url=WARN
    tracelevel.fetchlets.urllines=WARN
    tracelevel.fetchlets.urllinetoken=WARN
    tracelevel.fetchlets.URLTiming=WARN
    tracelevel.fetchlets.propEcho=WARN
    tracelevel.fetchlets.readFromFile=WARN
    tracelevel.fetchlets.readMultFromFile=WARN
    tracelevel.fetchlets.throwable=WARN
    tracelevel.fetchlets.resourceGrab=WARN
    tracelevel.fetchlets.emSDK=WARN
    # The following three properties are for HTTP timeout
    # Timeout value for reading Http primary header, default is 30 seconds.
    httpTimeoutPrimaryHeader=30
    # Timeout value for reading http secondary headers, default is 30 seconds
    httpTimeoutSecondaryHeaders=30
    # Timeout value for reading http body, default is 60 seconds.
    httpTimeoutBody=60
    omsRecvDir=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\sysman\recv
    agentTZRegion=+08:00
    And i would like to know how to set up the environment variable for Oracle_HOME and ORACLE_SID.
    Please kindly assist me on this.

    Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
    emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
    As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
    -Ramesh

  • Webi does not pick correct Data

    Hi Guys,
    I have a webi. The Universe for the Webi is based on  Bex Query. I see correct Data in Bex Query but when I create a webi report it does not pick correct data.
    I have checked following points already:-
    1] No Resstriction at Query Level
    2] No restriction at Universe Level
    3] No Filters/ Restriction at Webi Level.
    Can anyone suggest whats happening?
    Regards

    Hi Ray,
    It happens sometimes that data gets aggregated over all the dimension objects present in the 'Available Objects' section in webi.
    Try to pull only the characteristics present in the row section of the bex query say 'X' and measure in the column section of bex query say 'Y' into the results pane in the edit query window in webi.Then run the report and check.
    This will give you the idea about aggregation.
    Regards
    Vineeta

  • Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

    I use the CS6 suite with Acrobat XI at windows platform.
    When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
    I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
    What is the reason of this bug?
    Before with Acrobat X this worked without problems

    Hi Rob,
    I was told the new way to work would be to draw files via Bridge direct into the InDesign file
    and I thought automatically the color would not be changed.
    my colourmanagement setting in bridge for the whole CS6 was  ECI isocoated_V2_300
    The Illustrator file was saved without color profile.
    In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
    DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
    “e.V.” was set to 100 % k
    I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
    no color conversion
    convert to profile
    convert to profile keeping existing values
    in all tree files the pirates background has 322 % ink coverage instead of 291 %
    Why does Acrobat convert “black” in the wrong way?  If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
    Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
    The same happens also by saving as .pdf X3 or .X1
    The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
    I also made test with the new ECI profiles for laminated prints from 2012.
    And with newspaper profiles
    In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
    And then the 100 % k converts to cmyk, what I don’t want to have with text.
    Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
    And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
    I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
    enclosed you find my files
    Kind regards
    Lutz Hanbueckers
    Hanbueckers Werbung GmbH
    Brandsackerstr. 5
    40764 Langenfeld
    P.O. Box 40 02 01
    40242 Düsseldorf
    Tel. +49 02173 1 09 44 - 0
    Fax +49 02173 1 09 44 - 10
    [email protected] <mailto:[email protected]>
    www.hanbueckers.de
    Visit our site
    Steady attractive offers!!!
    HR Düsseldorf B 26 480
    owner Manager: Lutz Hanbueckers
    Von: Rob Day [email protected]
    Gesendet: Samstag, 2. März 2013 04:26
    An: Hanbueckers Werbung
    Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
    Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
    created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

  • Oracle application server 10g enterprise manager is not starting

    Hi all,
    Pls. help me, our OAS 10g's enterprise manager is not starting whereas AS is up & opmn is also running.
    Can anybody has idea?.Thanks in advance.

    hi Kamran,
    Please remember to always give some details about what product/ type/ version/ platform are you working with. this does not leave others to wait for divine revelation or mortal guessing;
    also on reporting errors, please provide exact error(s) with error codes as you see and not the error described in your words. that helps clearly understand the problem.
    about current problem, please tell us what did you expect to see and what did you exactly get.
    and Roberto is right, check the version in %ORACLE_HOME%\config\ias.properties.
    regards,
    AMN

  • Blackberry Desktop Manager does not show Media Manager

    First, let me say I am a NEW Blackberry user, my hubby and I both got new Blackberry Curves 8310 recently.
       When I installed the disc that came with the phone, the Blackberry Desktop Manager does not have the "Media Manager" as one of the choices, as was shown on all of the booklets and tutorials. I even re-installed the program, thinking maybe it didn't download completely the first time, but it still comes up showing only these 4:
             Synchronize, Backup & Restore, Application Loader, and Switch Device Wizard.......
    All of the directions I've received show that I can easily add pictures and music simply by clicking on Media Manager, but it just isn't there.
    Here is info about the installation disk that we received with our phones, supposedly the correct and latest versions . . ..
    Blackberry Desktop Manager
    version 4.3.0.17 (Nov.12 2007)
    Device Communications      Blackberry Device mgr....4.3.0.7
                                             BBDevMgr   ................4.0.0.1
                                             RIM USB Driver.............4.0.0.2
                                             RIM USB Serial Driver.......2.1.0.4
    Application Loader          Application Loader ..........4.3.0.13
                                         RIMProgram .....................1.0.0.35
    Seriously, none of these really means a whole lot to me, I just want to click on something and have it work . . .  I did try to "upgrade" to a newer version, and I got the message that the version I had was the newer one, so now what?
    I have memory cards inserted in the phone(s).
    I will appreciate any help with this, I'm really frustrated. I figured out how to move files manually, but I don't understand why it isn't showing up as illustrated in the instruction manuals and online tutorials.
    Solved!
    Go to Solution.

    mamapajama wrote:
    First, let me say I am a NEW Blackberry user, my hubby and I both got new Blackberry Curves 8310 recently.
       When I installed the disc that came with the phone, the Blackberry Desktop Manager does not have the "Media Manager" as one of the choices, as was shown on all of the booklets and tutorials. I even re-installed the program, thinking maybe it didn't download completely the first time, but it still comes up showing only these 4:
             Synchronize, Backup & Restore, Application Loader, and Switch Device Wizard.......
    All of the directions I've received show that I can easily add pictures and music simply by clicking on Media Manager, but it just isn't there.
    Here is info about the installation disk that we received with our phones, supposedly the correct and latest versions . . ..
    Blackberry Desktop Manager
    version 4.3.0.17 (Nov.12 2007)
    Device Communications      Blackberry Device mgr....4.3.0.7
                                             BBDevMgr   ................4.0.0.1
                                             RIM USB Driver.............4.0.0.2
                                             RIM USB Serial Driver.......2.1.0.4
    Application Loader          Application Loader ..........4.3.0.13
                                         RIMProgram .....................1.0.0.35
    Seriously, none of these really means a whole lot to me, I just want to click on something and have it work . . .  I did try to "upgrade" to a newer version, and I got the message that the version I had was the newer one, so now what?
    I have memory cards inserted in the phone(s).
    I will appreciate any help with this, I'm really frustrated. I figured out how to move files manually, but I don't understand why it isn't showing up as illustrated in the instruction manuals and online tutorials.
    Hi...
    I can help you with the download link...
    The link is here
    When you get to the page that has the downloads, pay attention to which version your downloading as some have media manager (near bottom) and some do not have media manager (near top)
    Let us know how your doing...
    Do you have XP or Vista?
    H.
    +++++++++++++++++++++++++++++++++++++++++++++++++
    If successful in helping you, please give me kudos in my post.
    Please mark the post that solved it for you!
    Thank you!
    Best Regards
    hmeister

Maybe you are looking for

  • All values from multiple select LOV

    Hi. Ik have a customize screen for a chart where a can select days. That works. But i want the standard value to be 'all days', so the user does not have to click all seven days. When i have combobox i use in the where clause: "and (fieldname = :vari

  • IDES SR3 installation on Windows 2003 (64 Bit) and oracle

    Hello everybody, I am trying to install the IDES SR3. But I after on database creation step, it take 1 Hr. but till not complete. when I check the log it display message like Unable to get information about path LABEL.ASC\ using GetVolumeInformation.

  • Problem with MSS 60.1.5 package (R/3 4.7 as backEnd)

    Hi All I'm try to using Package MSS 60.1.5 (JSP, BSP, ITS [No WebDynpro]) BackEnd R/3 4.7 on WebAS 6.20 FrontEnd Portal 6.0 SP14 I have the error from application iView, when I log in portal, like this "Could not connect to the R/3 System" as the lin

  • Metrics for PDF download in OBIEE

    Hi, Is there a way to capture metrics for "how many times a PDF file is downloaded?" in OBIEE. Thanks and Regards

  • Response ESB

    Hi, If the information in Oracle SOA 10g under AIA is to be follow the following flow synchronously Source -> Requestor ABCS -> xEBS -> Provider ABCS -> Target -> Provider ABCS -> ???(EBS) -> Requestor ABCS -> Source should i use the same EBS for the