Testing 5515x at home, no internet route

hi all,
im new to cisco asa and the model is 5515x with license plus.  below is my config at home,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ciscoasa#
ciscoasa# sh run
: Saved
ASA Version 8.6(1)2
hostname ciscoasa
domain-name test1.com
enable password NuLKvvWGg.x9HEKO encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 192.168.0.50 255.255.255.0
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 192.168.64.1 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
dns server-group DefaultDNS
domain-name test1.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
pager lines 24
logging enable
logging asdm informational
mtu management 1500
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) after-auto source dynamic any interface
route outside 0.0.0.0 0.0.0.0 192.168.0.1 1
route inside 192.168.64.0 255.255.255.0 192.168.64.1 10
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
dhcpd address 192.168.64.40-192.168.64.60 inside
dhcpd dns 192.168.0.1 192.168.64.100 interface inside
dhcpd lease 200000 interface inside
dhcpd ping_timeout 500 interface inside
dhcpd domain test1.com interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
  message-length maximum client auto
  message-length maximum 512
policy-map global_policy
class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny
  inspect sunrpc
  inspect xdmcp
  inspect sip
  inspect netbios
  inspect tftp
  inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:b949cd442fac1704e13bddea727442f2
: end
ciscoasa#
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
i did a trace packet,
ciscoasa# packet-tracer input inside icmp 192.168.64.100 8 0 6 8.8.8.8
Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in   0.0.0.0         0.0.0.0         outside
Phase: 2
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 3
Type: INSPECT
Subtype: np-inspect
Result: ALLOW
Config:
Additional Information:
Phase: 4
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (inside,outside) after-auto source dynamic any interface
Additional Information:
Dynamic translate 192.168.64.100/6 to 192.168.0.50/63184
Phase: 5
Type: FLOW-CREATION
Subtype:
Result: ALLOW
Config:
Additional Information:
New flow created with id 214, packet dispatched to next module
Result:
input-interface: inside
input-status: up
input-line-status: up
output-interface: outside
output-status: up
output-line-status: up
Action: allow
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
but when i ping from my host 192.168.64.100/active directory server, i can't ping 8.8.8.8 (or even 4.2.2.2) and of course no internet.
i can ping from my console,
ciscoasa# ping 8.8.8.8
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 30/40/60 ms
ciscoasa#
how do i fix this?  my asa 8.6 and my asdm is 6.6.
thanks for any comment you may add.

Hi,
Can you add the following configurations and try ICMP from behind the ASA
policy-map global_policy
class inspection_default
  inspect icmp
- Jouni

Similar Messages

  • How to test Smart Call Home in cisco router?

    Hi ,
    I have done basic configuration n cisco router for Smart call Home.Please help me out on testing SCH if its proper or requres more configuration.Below is the configuration;
    call-home
    contact-email-addr [email protected]
    mail-server 10.0.0.59 priority 1
    mail-server "" priority 2
    mail-server "" priority 3
    mail-server"" priority 3
    profile "CiscoTAC-1"
      active
    profile "Test"
      destination preferred-msg-format long-text
      destination address email ""
      destination address email ""
      subscribe-to-alert-group environment severity critical
      subscribe-to-alert-group syslog severity minor pattern ".*"
      subscribe-to-alert-group configuration periodic weekly Tuesday 17:00
      subscribe-to-alert-group inventory periodic monthly 30 20:30

    hi bryan,
    But how will i know the cisco is receiving the alerts for the devices.Is there any way for checking that.
    Profile Name: CiscoTAC-1
        Profile status: ACTIVE
        Preferred Message Format: xml
        Message Size Limit: 3145728 Bytes
        Transport Method: email
        Email address(es): [email protected]
        HTTP  address(es): https://tools.cisco.com/its/service/oddce/services/DDCEService
        Periodic configuration info message is scheduled every 13 day of the month at 10:03
        Periodic inventory info message is scheduled every 13 day of the month at 09:48
        Alert-group               Severity
        diagnostic                minor
        environment               warning
        inventory                 normal
        Syslog-Pattern            Severity
        .*                        major
    Please suggest..

  • What is the best internet router out there

    i am looking into get a new wireless internet router for my home, i want one that will have a strong signal and that can go a fair distance. any sugestions?

    You want to have other suggestions besides Airport Extreme? Well, depends how much money you want to put, Cisco E4200V2 has been quite good and surprisingly good range.
    If you want to put even more money into wireless, you can get very high quality and powerful Access Points from Ruckus, but honestly pretty much all higher end corporate access points are as powerful.
    Message was edited by: Hyugafe

  • Possible internet routing issues driving me crazy!

    I've somehow hit a problem accessing a particular favourite website and it seems I may have a routing issue.
    I've spoken with a friend who is fairly network savvy and he's suggested I raise a case \ complaint with BT. I thought I'd use this forum to test if I'm missing something I could be doing to fix it before logging a problem with BT Helpdesk!
    I've a BT Homehub 2 (Current firmware    4.7.5.1.83.3.5 (Type B) and I can access pretty much all websites I care to look at without any issue at all, however the site I read most days is now no longer viewable on any of my 2 PC's nor my iPhone. When I try to access it I  get no error messages at all just a blank white page.
    Doesn't matter if I try using IE or Firefox or Chrome browers it's the same result - I just see a blank white page.
    The site in question www.celticquicknews.co.uk (or www.celticquicknews.com) and is definitely available, as I can access it when using a site such as http://www.free-internet-organization.tk/ on both my PC's and iphone so I know the web site is up and running and available for browsing but since Thursday lunchtime I've had no joy in being to access that particular site directly wihout resorting to using another middleman site to let me view it.
    I have tweeted the guy who hosts the www.celticquicknews.co.uk site and he's said his site is fine but has numerous similar queries around BTINTERNET folks having the same issue as I'm reporting.
    I run McAfee Internet Security and having disabled the various firewall \secure browsing functions no improvement still no joy.
    I did successfully somehow connect directy to the illusive web site this morning (Sunday 1st May) on my iphone at around 10am, but by the time I boiled the kettle to have a coffeee and sit and read the site it became inaccessable again on my iphone and both my PC's! So what's going on?
    www.celticquicknews.co.uk [217.174.253.143]
    www.celticquicknews.com [217.174.253.143]
    Homehub TCP\IP info is as below which I suspect is of value to the more techincal on the forum:
    Broadband network IP address    109.152.154.29
    Default gateway    217.32.142.102
    Primary DNS    194.72.0.114
    Secondary DNS    62.6.40.162
    ADSL line status
    Connection Information
    Line state    Connected
    Connection time    0 days, 01:11:16
    Downstream    15,978 Kbps
    Upstream    1,144 Kbps
    ADSL Settings
    VPI/VCI    0/38
    Type    PPPoA
    Modulation    G.992.5 Annex A
    Latency type    Interleaved
    Noise margin (Down/Up)    5.2 dB / 6.0 dB
    Line attenuation (Down/Up)    31.0 dB / 13.8 dB
    Output power (Down/Up)    23.6 dBm / 1.7 dBm
    C:\>tracert -d 217.174.253.143
    Tracing route to 217.174.253.143 over a maximum of 30 hops
      1    <1 ms    <1 ms    <1 ms  192.168.1.254
      2    15 ms    15 ms    15 ms  217.32.142.102
      3    18 ms    17 ms    16 ms  217.32.142.142
      4    22 ms    22 ms    21 ms  213.120.163.26
      5    22 ms    20 ms    21 ms  217.32.27.30
      6    21 ms    21 ms    21 ms  217.32.27.178
      7    22 ms    21 ms    21 ms  109.159.250.78
      8    33 ms    35 ms    35 ms  109.159.250.13
      9    28 ms    28 ms    29 ms  62.172.102.1
     10    29 ms    28 ms    28 ms  195.66.224.98
     11    33 ms    34 ms    33 ms  88.208.255.61
     12    38 ms    32 ms    33 ms  88.208.255.102
     13     *        *        *     Request timed out.
     14     *        *        *     Request timed out.
     15     *        *        *     Request timed out.
     16     *        *        *     Request timed out.
     17     *        *        *     Request timed out.
     18     *        *        *     Request timed out.
     19     *        *        *     Request timed out.
     20     *        *        *     Request timed out.
     21     *        *        *     Request timed out.
     22     *        *        *     Request timed out.
     23     *        *        *     Request timed out.
     24     *        *        *     Request timed out.
     25     *        *        *     Request timed out.
     26     *        *        *     Request timed out.
     27     *        *        *     Request timed out.
     28     *        *        *     Request timed out.
     29     *        *        *     Request timed out.
     30     *        *        *     Request timed out.
    Trace complete.
    C:\>
    I've reset my HH several times over the weekend and am baffled as to how I can somehow have 1 site excluded from my browsing options for no obvious reason other than a suspected internet routing issue.
    My iPhone is on ORANGE and when disabling the wireless connection it too is unable to view the site in question so it's a real pain!
    Not sure where to go to progress this so any help \ guidance is very much appreciated.......
    Solved!
    Go to Solution.

    Appreciate the help....been out for most of the day and checked in to see if any additional posts.
    I tried pinging the site and it does seem to resolve OK and also tried accessing site via IP but same issue - blank white page.
    >ping www.celticquicknews.co.uk
    Pinging www.celticquicknews.co.uk [217.174.253.143] with 32 bytes of data:
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.
    Then tried the telnet command "telnet 217.174.253.143 80" and I do not get any errors and as suggested the command prompt goes blank but no matter what I type I get no errors or response from server 217.174.253.143.
    My IP address has changed from this morning and sadly still same issue for me.
    Internet connection configuration
    Connection Information
    Connection time
    0 days, 10:05:37
    Data Transmitted/Received (MB)
    10.8 / 29.4
    Broadband username
    [email protected]
    Password
    Not configured
    TCP/IP settings
    Broadband network IP address
    86.147.168.198
    Default gateway
    217.32.142.102
    Primary DNS
    194.72.0.114
    Secondary DNS
    62.6.40.162
    The tracert comments make sense so that's helped me understand, thanks for checking that out.
    So what's the best option for me? Am I wasting BT and my own time logging a case?
    I'd not usually bother pursuing this for the sake of a single web site but I'm bemused how this has happened since last week?
    Thanks again for all help and guidance.
    PJ

  • The growth of the internet routing table + LISP

    I have been challenged with the task of putting together a 15-20 minute presentation of how I might go about solving the problem of the growth of the internet routing table.
    If I am understanding the question correctly - as the internet grows so will the number of IPv4 and (moreso) IPv6 prefixes that appear in the global internet routing table. This will mean that the PE and P routers in a Service Provider network will find themselves having to deal with more prefixes that will in turn increase the possibility of bogons interferring with proper routing and increase the load on the routers themselves.
    Besides being a very open ended question, I am trying to look at it from the perspective of a Service Provider (whom I work for) and have come up with the following options (admittedly this is only after a quick google on the topic):
    > Improvise in the short term by adjusting CAM table allocation
    > Use selective hearing by filtering prefixes that are not important
    > Use external assistance like LISP and DNS
    > Spend Money and upgrading existing routers to handle the load
    Obviously with only a 20 minute window I cannot talk about much and I would like the options to be innnovative and interesting. LISP seems like an interesting option and I would like to learn about it - however I am having trouble tracking down resources that give a basic introduction to exactly what and how LISP works (every time I try and search for it a get pushed to sites talking about the programming language ).
    So this leads me to two questions:
    1. Is there anything important, vital or interesting that I have not included in my quickly put together list above.
    2. Is anyone aware for a good site/resource that explains LISP from a beginners/tutorial-type perspective.

    I have been challenged with the task of putting together a 15-20 minute presentation of how I might go about solving the problem of the growth of the internet routing table.
    If I am understanding the question correctly - as the internet grows so will the number of IPv4 and (moreso) IPv6 prefixes that appear in the global internet routing table. This will mean that the PE and P routers in a Service Provider network will find themselves having to deal with more prefixes that will in turn increase the possibility of bogons interferring with proper routing and increase the load on the routers themselves.
    Besides being a very open ended question, I am trying to look at it from the perspective of a Service Provider (whom I work for) and have come up with the following options (admittedly this is only after a quick google on the topic):
    > Improvise in the short term by adjusting CAM table allocation
    > Use selective hearing by filtering prefixes that are not important
    > Use external assistance like LISP and DNS
    > Spend Money and upgrading existing routers to handle the load
    Obviously with only a 20 minute window I cannot talk about much and I would like the options to be innnovative and interesting. LISP seems like an interesting option and I would like to learn about it - however I am having trouble tracking down resources that give a basic introduction to exactly what and how LISP works (every time I try and search for it a get pushed to sites talking about the programming language ).
    So this leads me to two questions:
    1. Is there anything important, vital or interesting that I have not included in my quickly put together list above.
    2. Is anyone aware for a good site/resource that explains LISP from a beginners/tutorial-type perspective.

  • I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects.  It tries to but never connects.  I have reset it and have utility

    I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects.  It tries to but never connects.  I have reset it and have airprot utility app downloaded on my IPAD - it shows the modem and the internet no connected?

    Do you mean an Airport Extreme Base Station connected to a Comcast Modem?

  • My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

    My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • How set up  macbook  pro Internet router?

    how set up  macbook  pro Internet router?

    But isn't the MacBook Pro connected to the modem and being used as the router? You can only share an Ethernet connection wirelessly. You only check the box to share the Ethernet connection to Wi-Fi. Do not check any of the other boxes. You select Ethernet from the dropdown menu as the connection you will share. Your preferences should look like this:
    The only difference will be that yours will show just Ethernet, not Ethernet 1.

  • Trouble getting internet route table distributet in a VRF

    Hi every one ..
    I'm have some trouble getting distributed the internet routing table between PE routers ...
    CE1 og PE1 works fine, BGP routes all internet routes are shown i en route table, but distributing between PE1 and PE2 is now working .. any one having a clue !!.
    My gold is to move internet access into it's oven VRF, and away from the global routing table
    In the MPLS core aim running the same AS number as our official AS, that we use for peering to the internet..
    snap of configurations
    ***CE1***
    router bgp 65534
    neighbor 172.31.61.55 remote-as 65534
    neighbor 172.31.61.55 description PE-1
    neighbor 172.31.61.55 shutdown
    neighbor 172.31.61.55 update-source Loopback0
    neighbor 172.31.61.55 next-hop-self
    ***MPLS PE1***
    ip vrf NET-INTERNET
    rd 65534:10051
    route-target export 65534:10051
    route-target import 65534:10051
    interface Port-channel1.35
    encapsulation dot1Q 35
    ip vrf forwarding NET-INTERNET
    ip address 172.31.61.55 255.255.255.224
    mpls label protocol ldp
    tag-switching mtu 1546
    tag-switching ip
    router bgp 65534
    neighbor 192.168.0.146 remote-as 65534
    neighbor 192.168.0.146 description PE2
    neighbor 192.168.0.146 update-source Loopback0
    neighbor 192.168.0.146 version 4
    neighbor 192.168.0.146 next-hop-self
    address-family vpnv4
    neighbor 192.168.0.146 activate
    neighbor 192.168.0.146 send-community both
    exit-address-family
    address-family ipv4 vrf NET-INTERNET
    neighbor 172.31.1.2 remote-as 65534
    neighbor 172.31.1.2 activate
    neighbor 172.31.1.2 description CE1
    no auto-summary
    no synchronization
    exit-address-family
    ***MPLS PE2***
    ip vrf NET-INTERNET
    rd 65534:10051
    route-target export 65534:10051
    route-target import 65534:10051
    interface Port-channel1.67
    encapsulation dot1Q 67
    ip vrf forwarding NET-INTERNET
    ip address 172.31.254.1 255.255.255.252
    mpls label protocol ldp
    tag-switching mtu 1546
    tag-switching ip
    router bgp 65534
    neighbor 192.168.0.132 remote-as 65534
    neighbor 192.168.0.132 description PE1
    neighbor 192.168.0.132 update-source Loopback0
    neighbor 192.168.0.132 version 4
    address-family ipv4 vrf NET-INTERNET
    neighbor 172.31.254.2 remote-as 65534
    neighbor 172.31.254.2 activate
    Best regards
    /Peter

    For VPN routes to be exchanged between the two PEs, you first need to configure VPNv4 address family on each one of the PEs.
    Carrying the full Internet routing table over VPNv4 will work but it is not very scalable since all PE routers have to hold the full Internet routing table in the VRF context in addition to potentially full Internet routing table in the global routing table. If you want to exchange full Internet routing table between the two CEs, it would be preferable to use something Carrier Supporting Carrier (CSC).
    Please refer to the following URL for additional information on CSC:
    http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s23/fscscl23.htm
    Hope this helps,

  • Full internet routes in MPLS-VRF

    hi~ all
    I just have some confused , whether it's good way load full internet routes in MPLS VRF , which there's no any service routing in core network but topology routing . but there's dual upstream ISP connecting ASBR , I'm afraid if I load these two full internet routes into VRF on 7600 , is it possible ? does it take so long time for loading routes in VRF ?
    could someone give me some proposal about it or some experience about internet routes in VRF , thanks.

    Its not a good practise to load all the internet rouetes in the vrf. Do use vrf leaking. For this create a vrf of named internet which will be loaded with the default route and export that route with the rd and mport that route in your particular vrf. With this you will be having only 1 route in the vrf.
    regards
    shivlu

  • How to test Cisco Call home on UCS

    How do you test the call home feature on Cisco Call home?
    Thx

    Mark - Please see
    http://www.cisco.com/en/US/products/ps10281/products_configuration_example09186a0080ae7835.shtml
    Regards,
    Robert

  • Full internet routing in an internet MPLS VPN

    Is it possible and advisable to run the full internet routing table in a seperate MPLS VRF. A default route is not an option
    With kind regards,
    Mike

    Hi,
    It is not advisable to have full Internet Routing table in a vrf.It is possible that you may run out of memory since different routers have different vrf routes holding capacity.e.g if you are using 12000 series and you have only one vrf configured then you can hold the entire Internet routing table in one vrf.
    Which router you have ? Is it 12000 ?How many vrfs you have ? How many routes have you per vrf ?
    You need to consider the above questions before making the decision.
    -Waris

  • I bught a new Time Capsule 2Tb. I connected it to my internet router. I manege to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

    I bought a new Time Capsule 2Tb. I connected it to my internet router. I manage to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

    What IP address does the TC have and what IP does the computer have?
    We need more info as we really have no idea what your network looks like.
    Modem router, model, type of broadband?
    TC setup as bridge or router?
    Is the computer getting internet via the TC?
    Are you using wireless or ethernet?
    Have you set IPv6 correctly to local link in the computer on whichever network client is doing the connection?
    Did this work the first time for backup and has now failed? If so simply reboot the TC. It is a constant bug that the TC is lost to the network.

  • My AppleTV will not play anything over Air Play.  Every other function works perfectly, and my Internet/router are working at top speed.  I can watch HD Netflix and YouTube but nothing via my iTunes library on my MacBook or iPad.  All software is updated.

    Every other function works perfectly, and my Internet/router are working at top speed.  I can watch HD Netflix and YouTube but nothing via my iTunes library on my MacBook or iPad.  All software is updated.  The AppleTV will recognize that Air Play is trying to do it's thing, but with music files it sounds like they're skipping and video files just load endlessly. 

    I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
    The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

  • Monitoring Internet Router from inside network

    I need help in setting this up. At the moment we are using Opmanager monitor our routers inside the network. I want to monitor our internet router sitting outside the network. Be really grate if someone can help out or point me out on how to set this up.
    Regards

    Thanks for your reply. Actually what I want is for my monitoring application sitting inside my network to monitor my internet router via SNMP. There is a FW in between
    I have tried that PRTG application and its not bad. Thanks

Maybe you are looking for

  • I keep getting warnings that my icloud space is almost full, but I have almost 1GB left

    I recently upgraded my iPhone 4S to iOS 8, then a couple of days later got an iPhone 6 (obviously with iOS 8), 64GB. I've removed the backups from my old phone, so in my iCloud, it's telling me there's a backup for my iPad of around 800MB and my (new

  • Scheduling error in Explorer

    Hi, I am trying to schedule the indexing of a report in explorer and I am getting the below error. I am using an administrator user id for this. Failed to update information space Internal error com.businessobjects.datadiscovery.persistence.exception

  • PDF email on ipad

    Hi I am unable to open PDF attachment from e mail on I pad.  Have downloaded adobe reader and followed all instructions but still cannot open it . Thanks Jinty 70

  • How to stop remittance advice to vendor after the app run

    Dear All,              Our vendors don't want to receive remittance advice after the APP run. Is there any option where i can block the remittance advice for certain vendors after the run. Please let me know Thanks & Regards Balaji Dhanavel

  • PROBLEM IN SELECT OPTION

    Dear all, i want to display the document no,document status,date of document,document type and item details here input field is document number.tables are bkpf and bseg.i wrote the program and executed that program it causes runtime error.so please s