Testing a File sender Scenario

How do I test this? I have a Scenario where the outbound adapter is a File FTP and the Poll Intervals is 60sec. Everything seems okay but I cannot see the status in sxmb_moni Is there maybe a way to manually trigger this event?

Hi,
First you need to check the communication channel is in active state?
Go to RWB->Componnet Monitoring-> AdaterEngine-> click on Communication Channel
Then select the Sender communicaiton Channel and check whether it is in Green color or not?
You can findout the error in RWB-> Message Monitoring and find is there any System Errors, if exist then select that radio button and click on Details,
It displays the error details.
And also check the your folder is having the Read/Write acces.
Regards
Goli Sridhar

Similar Messages

File Sender Scenario - Mapping error message

Hi All
Scenario
I am trying to develop a test scenario where a record is read from the file and sent to R/3 using RFC (Bapi)
So i believe this will involve a file adapter as sender and a RFC adapter as receiver, I have configured data types, message types, message mapping, interface mappings, sender determination, receiver determination etc.
Problem
When i put the text file in the polling directory the file is read, but there is an error,
On checking Processed XML message in SXMB_MONI I see that the following steps listed
1 - Inbound message (CENTRAL)
2 - Receiver Determination
3 - Interface Determination
4 - Receiver Grouping
5 - Message Branch According to Receiver
6 - Request Message Mapping
7 - Request Message Mapping
Step 1 - 6 does not show any error message, step 7 has an error with the following message
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_basic_paycreate_file_to_rfc_map~</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException<;/SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
Additional Information
My Business System Commnication channel has a Sender File adapter, this file sender is configured to read from file system from a certain directory and message protocol is File Content Conversion.
In Content Conversion parameters input fieldname and input separator are configured (does anything else need to be configured in this section?)
My input file is of the structure aaa,bbb,ccc,ddd,eee,fff,ggg
My Data Type is of the structure
<data header>
     <aaa></aaa>
     <bbb></bbb>
     <ccc></ccc>
     <ddd></ddd>
     <branch1>
               <eee></eee>
     </branch1>
     <branch2>
               <fff></fff>
     </branch2>
     <branch3>
               <ggg></ggg>
     </branch3>
</data header>
Questions
First question is why is there 2 instance of Request message mapping showing up in the monitor? Isn't this supposed to show up only once?
Second question it appears that the problem is something to do with Mapping (Message Mapping) but i tried to test the message mapping manually using the data generated in the payload and it passes the mapping successfully.
Third question, how is the input flat file converted to the complex structure of data type (as mentioned in additional information above) is this done by the input.filedNames that assigns the corresponding values from flat file to the data type?
Fourth question - is there a way to run the process step by process (as a step through in other programming IDEs?) so the problem can be more easily identified?
Thanks
Anant

Hi All
I little update - it appears that some of the scenarios developed earlier that were working earlier are now also failing at the same process of mapping with this error message.
So i am suspecting that this is not a problem with the mappings in my scenarios but rather a some technical setting related to how XI invokes this class - com.sap.aii.utilxi.misc.api.BaseRuntimeException.
Does any one have any ideas what i can check to confirm this? Whether the problem is in the technical setting or the scenario configuration?
thanks
Anant
error message attached.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_CheckDeposit_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_CheckDeposit_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Testing the File sender from local computer

Hi Gurus,
I know that this is a very low level question. I am working on a File-XI-IDOC interface. I wanted to keep the file on my computer. How to set the file adapter sender which can pick up the file from my machine.
I have downloaded WS-FTP Server on my machine and given my computer's IP address in the file sender communication channel. Where to keep the file so that XI can pick it up?
Please help.
Thanks
Kalyan

Hi Shabarish,
I have installed Guild FTP tool on my machine and placed the file in the root directory as per your blog. My file is not being picked up by XI at all. When I checked in adapter monitoring it says, the connection timed out. The following is the message I am getting.
Sender Adapter v2727 for Party '', Service 'BS_KSV_CM':
Configured at 2006-10-10 18:57:56 CEST
History:
- 2006-10-10 20:08:00 CEST: Processing started
- 2006-10-10 20:07:18 CEST: Error: Error connecting to ftp server '10.197.97.20': ConnectException: Connection timed out
- 2006-10-10 20:01:00 CEST: Processing started
- 2006-10-10 20:00:18 CEST: Error: Error connecting to ftp server '10.197.97.20': ConnectException: Connection timed out
- 2006-10-10 19:54:00 CEST: Processing started
Earlier I don't see this error even though I don't have FTP Server running on machine.
Please help me how to resolve this issue. Is it firewall not allowing it to connect?
Thanks
Kalyan

Adding Namespace in Sender File Adapter Scenario.

Hi All
I have a scenario where XI has to Pick Up XML a file and process it. The structure of the file is as follows
<?xml version="1.0" encoding="UTF-8" ?>
<Header>
     <Seg1>
     </Seg1>
</Header>
This file does not contain any any namespace tag. I guess XI would not be able to pick up this file if there is no namespace in the XML file . The file expected by XI would be something like this.
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:MessageTypeName xmlns:ns0="...namespace...">
<Header>
     <Seg1>
     </Seg1>
</Header>
</ns0:MessageTypeName>
Is there a way this can be handled at the File Sender adapter side . I am aware about adding adapter module. Is there any other way to add the missing two namespace tags at the top and bottom of the file .
any help would be appreciated.
regards
Nilesh .
Edited by: Nilesh Taunk on Apr 7, 2008 2:11 PM

Hi Nilesh,
Yes it is possible in File sender adapter to give the namespace. In FCC you can give inside Document Specification.
Under Document Name, enter the name of the XML document.
The document name is inserted in the message as the main XML tag. This is mandatory for the mapping.
Under Document Namespace, enter the namespace of the document.
The namespace is added to the name of the document. This is mandatory for the mapping
I hope this will help you.
Regards
Aashish Sinha

Using TEST mode in sender file channel to trigger jdbc receiver channel

Hi
In order to call a jdbc receiver channel every 15 minutes I intended to use a file sender channel as a trigger where I set the Processing Mode to TEST. However, I would like to make multiple simultaneous different calls to the jdbc receiver channel, so I have multiple files in the folder, where the file sender channel is listening. Quality of Service in the file sender channel is set to Best Effort as the call is syncroneous.
However, because the messages in the folder are not deleted, only the first message is being processed no matter whether I choose Processing Sequence "By Date" or "By Name".
I would like to avoid having to create 15 folders containing one message each, so is there another way of doing it?
By the way, I redirect the response from the jdbc receiver channel to a different folder, but I think this is irrelevant in this case.
I use PI 7.11
/Mikael

Thanks for your answer, but I would like to avoid using Availability planning.
Right now I am thinking about using "Advanced selection for source file" and then just specify 14 different folders here each containing one trigger message, but it seems that only the oldest message (if I choose Processing Sequence = Date) or the first message alfabetically (if I choose Processing Sequence = Name) is being processed across the many folders which I think is very weird!

In my Scenario i want to configure file sender Adapter.But in Parameters

In my Scenario i want to configure file sender Adapter.But in Parameters, for Adapter Engine Column It Shows blank,Integration Server will not appear for that column.Finally It Gives Error- Adapter Engine is not Defined.
What is the Reason for this...
Please Clarify ASAP...
Thanks..

Hi Chiru,
      It seems that you may have missed some steps while doing the configuration. After doing all the activities in SLD and IR and activating all the components created in IR it should work.
      Plz check that you have selected as Adapter Type as File and correct namepace in the next field. Transport Protocol as File System (NFS), Message Protocol as File and I hope after all these information you will get Integration Server in the Adapter Engine field.
    If the problem persists please revert back.
Warm Regards,
Subhasha Ranjan

Test a file to fle scenario using NFS in 7.1

Hi Experts,
I have one small confusion...
when testing a file to file scenario in PI 7.1 using NFS...im wondering what path should i specify for the source directory?
cos earlier in 7.0, i would have given /usr/sap....
but now i dont think 7.1 has visual admin..so what shoud i so?
ne suggestions?

Hi Ravinder ,
cos earlier in 7.0, i would have given /usr/sap....
but now i dont think 7.1 has visual admin..so what shoud i so?
> there is nothing to do with visual Admin ..
Just give a sharable folder path to pick and post the file as you were giving earlier. If your concern is file path ask basis person to help you.
Regards,

File sender adapter (FTP) - processing mode "Archive"

Hello all
We're polling files from an external FTP server. For this I created a scenario on XI according to this thread:
When setting processing mode to "Archive" in the file sender adapter (ftp) it polls the file, stores it to the archive directory I specified and then tries to delete the file on the FTP server side. This returns me an error because we're not allowed to delete the retrieved files on the FTP server!
Because of this error the file adapter stops further processing and does not poll all the other files.
How can I disable this deletion mechanism while keeping processing mode to "Archive"?!?!?
We do not want to use processing mode "Delete" or "Test" and we don't see other options to influence this behaviour.
Thanks for any guideance on this one in advance!
Kind regards,
Renaud

Hi Bhavesh
Sorry for the late answer. Unfortunately I can't ask the application system to provide file names containing a timestamp within. The files are provided by an external partner and are retrieved by several others as well.
In the meantime I managed to achieve this:
In repository I created dummy data types, message types and message interfaces. No mapping programs and interface mappings!
In configuration I created the necessary communication channels (1 ftp sender, 1 file receiver) and the required receiver and interface determinations as well as the sender and receiver agreements.
The result of this is:
I'm able to poll some specific files via ftp from remote host. The file names are file1.arj, file2.arj, file3.arj and file4.arj. All 4 files have the same SourceFileTimestamp (e.g. "20060727T053900Z").
I'm able to store those 4 files 1:1 in a target directory with the same file names. Until here I did NOT need to follow this blog: <a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a>.
As of this blog it is possible to access adapter specific attributes and make them available in message mapping using user defined functions. This way I'm able to get the SourceFileTimestamp from the polled files and use it in a message mapping. This way I'm also able to use it in variable substitution on file receiver adapter (syntax = "payload:root,1,fileTS,1") in order to dynamically create a directory with this syntax: YYYYMMDD.
So far so good... but the only remaining BIG problem now is, that as soon as the mapping is activated and assigned in the interface determination, the created files contain the XML payload instead of the original binary content. Where has it gone? How should the target message type look like so that it can carry over the original binary file content?
BTW: isn't it possible to post screenshots? Would be much more easier to explain things... so sorry to anyone if I wasn't clear enough!
TIA and best regards,
Renaud

File Sender adapter not reading the first line

Hi,
I have a scenario configured from file to jdbc adapter.
However, I found a problem in my file sender adapter. My file adpater always not picking up the first line from my text even I have set the 'Document Offset' to 0.
Any Ideas? Thanks.
Regards,
Pua

Hi Latika Sethi,
My complete input text file is as below, it contains only 2 testing records:-
H1|DIZ1                          |A0016507    |10000020|09/2007
H2|ABC0001
D|P|0001|Gaji Pokok       |   1,000.09
D|D|0002|Denda              |   1,000.00
D|P|0003|Elaun               |   1,000.00
H1|PUA1                        |A0016508    |10000021|09/2007
H2|ABC0002
D|P|0001|Gaji Pokok       |   2,744.09
D|D|0002|Denda              |   2,000.00
D|P|0003|Elaun               |   2,000.00
After the message mapping, I found the pipeline existed in sxmb_moni as below:-
<?xml version="1.0" encoding="utf-8"?>
<ns:mt_rmp03B_filejdbc_sender xmlns:ns="urn:rmp03:pdrm:ips:jdbcjdbc">
<PaySlip>
..<Header2>
.... <IC>ABC0001</IC>
.. </Header2>
.. <Details>
.... <Jenis>P</Jenis>
.... <No>0001</No>
.... <Deskripsi>Gaji Pokok</Deskripsi>
.... <Jumlah>1,000.09</Jumlah>
.. </Details>
</PaySlip>
<PaySlip>
.. <Header1>
.... <Nama>PUA1</Nama>
.... <KWSP>A0016508</KWSP>
.... <NoGaji>10000021</NoGaji>
.... <Bulan>09/2007</Bulan>
.. </Header1>
.. <Header2>
.... <IC>ABC0002</IC>
.. </Header2>
.. <Details>
.... <Jenis>P</Jenis>
.... <No>0001</No>
.... <Deskripsi>Gaji Pokok</Deskripsi>
.... <Jumlah>2,744.09</Jumlah>
.. </Details>
</Payslip>
There are 2 payslips as for the top payslip node...Header1 tag is missing. It means that during the file sender step....the first line of my record which is :-
"H1|DIZ1                          |A0016507    |10000020|09/2007"
is not read into the xi pipeline. Basically this is the problem i faced.
Has somebody facing the same problem before? Currently I have no choice but moved the First line of the text into Second line and left the first line of the text become null/ empty line. As such both records can be successfully read by the XI.
However what I wondered is sometimes clients will do insert the records into the first line and this might made some data loss.
Thanks...

Cant do a file get from external server using file sender adapter with ftp

Hi all,
Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
I have a requirement to do an ftp file get from an external server
From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues and communications are fine
Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
No messages appear in the RWB
Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
Regards,
Mike

Thanks for your responses.
I have found the error messages in the File Adapter Monitor
Scenario 1
When I prefix the source directory with a forward slash, eg <b>/Folder/Subfolder</b> the error message is as follows
<b>EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified</b>
Scenario 2
When I DO NOT prefix the source directory with a forward slash, eg <b>Folder/Subfolder</b> a different error message is returned
<b>Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified</b>
At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
Questions
I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
I thought that being a Sender adapter it would inherently execute a Pull or Get command
To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
Has anyone experienced these issues?
Please advise on next course of action?
Regards,
Mike

Adapter file sender doesn't split file into multiple message

Hi everybody.
We are in PI 7.0 SP10.
In adapter file sender, I want to split a file into multiple file.
We use protocole "file content conversion"
in the field "recordset per message", I put the value 10 to test.
The file content 30 records .
The result we have is the treatment is not split into multiple message .
The treatment is made but with one message.
I need to treat big files.
Is there some one who have an idea why t doesn't work ?
Thanks in advance for your help.
Regards
Edited by: Eric KOralewski on Jun 25, 2009 3:14 PM

Hi,
have you specified recordset name......if not, then specify it.............
in recordset structure, specify like RECORD,1 and not RECORD,*
again test your scenario......if still your file data is not getting split, then ask your basis guys to do a full CPACache refresh using PIDIRUSER..........your basis guys will know how to do it..........then again test your scneario............
Regards,
Rajeev Gupta

ATTRIBUTE_IDOC_RUNTIME error in File-IDOC Scenario

Hi,
I got this error in FIle-IDOC scenario.
ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPMMX, client , RFC destination contain errors
There are many threads on same issue. Almost in all threads, the suggestion given was, we need to check the Channel Definition(Port should be SAP<SYSID> and not SAP<SYSID>_<CLIENT>)
I have given the proper values for RFC desitnation and port. Even then, I m getting this error.
Is there any other suggestions?

Hi aarthi,
I suggest u chk all d settings dat u hav done..
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
Step 6)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 7)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
reward points if helpful...
MenoN

J2SE File Sender Adapter Error

Hi Experts,
I am doing a scenario on J2SE. Like this: J2SE File Sender -> XI -> J2SE File Receiver.
On File Sender adapter, it has an error, like this "ERROR: Finished sending to Integration Engine with error u201Cjava.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Foundu201D. Skip confirmation and quit this loop"
And this is the full log:
D:\Thach\Input\xi_test.xml
16:51:45 (4052): Start processing u201CTXTu201D file u201CD:\Thach\Input\xi_test.xmlu201D size 190 in u201CEO mode
16:51:45 (4058): Start converting to XML format
16:51:45 (4061): Converted complete file content to XML format
16:51:45 (4062): Sending text message u201Ce1ffc9e0-71e5-11de-8306-0019d12044f1u2033 type u201Capplication/xmlu201D to Integration Engineu2026 (message size: 633 bytes, URL: u201Chttp://host:50200/sap/xi/engine?type=entryu201D)
16:51:45 (4076): ERROR: Finished sending to Integration Engine with error u201Cjava.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Foundu201D. Skip confirmation and quit this loop
16:51:45 (4077): Retry mode - wait 10 sec, 0 msec interval before retry
And this the content of xi_test.xml:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Material_toPPS xmlns:ns0="http://gml.com/xi/XI/Tutorials">
   <Material>
      <Text>Test</Text>
   </Material>
</ns0:MT_Material_toPPS>
And this the configuration of J2SE File Sender:
mode=FILE2XMBWITHROWCONVERSION
XI.TargetURL=http://host:50200/sap/xi/engine?type=entry
XI.User=PISUPER
XI.Password=*********
XI.QualityOfService=EO
XI.SenderParty=
XI.SenderService=BS_PlainJ2SE_Sender
XI.ReceiverParty=
XI.ReceiverService=BS_FileRecv
XI.Interface=MI_Material_toPPS_OB
XI.InterfaceNamespace=http://gml.com/xi/XI/Tutorials
file.type = xml
file.sourceDir=D:
Thach
Input
file.sourceFilename=xi_test.xlm
file.processingMode=test
file.pollInterval=10
#Content conversion parameters in PlainJ2SE Adapter
xml.documentName = MT_Material_toPPS
xml.documentNamespace = http://gml.com/xi/XI/Tutorials
xml.structureTitle = Material
xml.processFieldNames = fromConfiguration
xml.fieldNames = Text
Please help to solve the issue.
Thanks so much,
vn thach

The URL of the Integration Server is wrong or you cannot access the server from the host, where the J2SE adapter is running:
XI.TargetURL=http://host:50200/sap/xi/engine?type=entry
If the Client of the Integration Server is not 000, then you have also to add that line:
XI.Client=XXX

Triggering file sender process from backend system

Hi,
We have implemented a file transfer using SAP PI to move a file from one of our business partner's FTP server to our SAP ECC backend system.
The integration scenario is file sender (using the SFTP protocol) to proxy receiver with an asynchronous service interface.
The file contains payment information which we wish to pull into our SAP ECC system once daily.
The scenario is currently working using the Runtime Workbench Availability Time Planning option which is set to activate the file sender communication channel accordingly.
To aid testing and to permit adhoc processing of the interface (let's say if there are additional payment runs required after the scheduled run) we'd like to be able to trigger the interface at the user side from the SAP ECC system.
As they don't have access to SAP PI the most appropriate solution would seem to be an ABAP program in SAP ECC that calls an outbound proxy that could link to the file sender mentioned above.
What options are there for creating this integration - can we implement BPM or is there an alternative?
As I've no experience of this type of scenario any blogs or example configuration would be useful.
Thanks,
Malcolm

You can control the CCs externally.
http://help.sap.com/saphelp_nwpi711/helpdata/en/45/0c86aab4d14dece10000000a11466f/frameset.htm
The users will need the two roles mentioned there. You can just create 2 links (one for start, one for stop) and add as favorites in the user's browser. Or if you have portal you could encapsulate this so the links are transparent to the user (also, the roles would be added just to the technical user, not the end user, and the user mapping would be handled in portal layer).
BR,
Henrique.

SOAP Sender replacing file sender

Hi All,
I had a working file -> RFC scenario.
The sending system was upgraded and it can send WS now.
I created a SOAP sender and changed the sender agreement accordingly.
I can see the message in the SXNB_MONI but it is stuck in the "Message Split According to Receiver List" section with no error.
The payload looks ok.
The status of the message stays an empty circle, it doesn't turn into any of the signs.
in the adapter log I get the following error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error
any ideas?

Couple of suggestions... Dont know how do you test??
a) Create WSDL and import in soap UI or xmlspy and test it and see what do you get? Still looks like some issue.
b) Go to ID and do configuration test. I want you to make sure visit all the ID objects and see the changes made are sync with all ID objects.
Check this thread
Queue stopped in sxmb_moni
Hope that helps

Testing a File sender Scenario

Similar Messages

Maybe you are looking for