Testing the File sender from local computer

Hi Gurus,
I know that this is a very low level question. I am working on a File-XI-IDOC interface. I wanted to keep the file on my computer. How to set the file adapter sender which can pick up the file from my machine.
I have downloaded WS-FTP Server on my machine and given my computer's IP address in the file sender communication channel. Where to keep the file so that XI can pick it up?
Please help.
Thanks
Kalyan

Hi Shabarish,
I have installed Guild FTP tool on my machine and placed the file in the root directory as per your blog. My file is not being picked up by XI at all. When I checked in adapter monitoring it says, the connection timed out. The following is the message I am getting.
Sender Adapter v2727 for Party '', Service 'BS_KSV_CM':
Configured at 2006-10-10 18:57:56 CEST
History:
- 2006-10-10 20:08:00 CEST: Processing started
- 2006-10-10 20:07:18 CEST: Error: Error connecting to ftp server '10.197.97.20': ConnectException: Connection timed out
- 2006-10-10 20:01:00 CEST: Processing started
- 2006-10-10 20:00:18 CEST: Error: Error connecting to ftp server '10.197.97.20': ConnectException: Connection timed out
- 2006-10-10 19:54:00 CEST: Processing started
Earlier I don't see this error even though I don't have FTP Server running on machine.
Please help me how to resolve this issue. Is it firewall not allowing it to connect?
Thanks
Kalyan

Similar Messages

There was a problem connecting to the server "my server.local" this file is available on your computer. Access the files and volumes locally.

Hi,
I have a strange problem connecting one of the office laptops (Macbook Pro 10.7) to the disk in the Apple Time Capsule. It's just one laptop that has this problem and the other 3 no problems at all and they all run OS X 10.7 Lion, I can access the Time Capsule disk over WAN on all machines but locally on the problem machine i get this message "There was a problem connecting to the server "myserver.local" this file is available on your computer. Access the files and volumes locally." Now from this message it sounds like the problem laptop thinks the network drive (Time Capsule) is the same as it's self in the way of name or address however they clearly have different IP addresses locally.
Any ideas on this would be apreciated as I can only think a clean install but don't want to do this if not necessary.
Thanks
Jarrah

I think I gave you some bad info in the above, where i enterered the text "myserver.local" & "example.local" this was the host name of the server (Time Capsule) so not local on the computer.
No i didn't try your method, I'll give it a go - I thought the folder option was for local files and not on a server ?

"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"

Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?

I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8

Is there an easy way to run an Ajax function from input type=file to test the file name in DB?

I've had the <input type="file"> ... <cffile ...> thing going for a few years now.
There is a database where the uploaded file names are stored once the files are uploaded to the server. It sees things in terms of problems and stores uploaded file name accordingly with the ProbID prepended onto the file name; e.g., MyPicture.jpg would end up in the designated directory and databawe as P416_MyPicture.jpg. This allows user to store pictures with the same name in different problems without a conflict. There has been an issue with certain characters (e.g., spaces, +, #, etc.) causing problems when they are in file names so we have come up with a way using the <cffile ... rename> to replace these chars with _. This means that MyPic+.jpg would end up being P416_MyPic_.jpg.
     This is where the problem appears. If someone were to upload MyPic+.jpg after someone else uploaded MyPic_.jpg in the same problem, then the + file would overwrite the _ file before the system knew they had a problem. And there is now way to restore the original file without going to the system backup and doing so – which is a whole other story … especially, if the person doesn’t tell anyone.
     The logical solution would be to be able to test the new final file name (the name after making the substitutions mentioned above) against the existing files in the database before you went from the page where the <input type=file> control to the associated _action.cfm page where the <cffile> object is located. Given that this seems to be the province of Ajax, this would seem like a natural use of the really interesting technology. I have can determine the file name from the onChange action on the <input type=File> so that this would be the place for Ajax to come to the rescue by looking up the final file name and then letting the user know whether the resultant name is a unique within the database or not. If so, I'll just enable the Add button which sets right next to the <input > control and let them upload it. If not, I'll put up an error message telling them that this file already exists in the system.
     This would be the perfect solution. It would let me do some Ajax stuff like I've wanted to do for the past year, but never have had the time to do because this is the project that won't go away. This is, in fact, the last thing of any consequence that remains to do on this 2-1/2 year nightmare – be careful what you wish for. If I can get this done this week, then maybe I can finally take a weekend off … maybe it will finally come to an end.
     Which finally leads to my question: I'm looking for some tips on how to get this thing going since I can barely spell Ajax. I've got a book and looked at some stuff online about CF and Ajax, but a good example or two or three would be worth a day's worth of poking around on the web and in my books.
     Thanks in advance for any suggestions, ideas, help, whatever.
Len

Adam,
     Thank you for your suggestion, but, after spending the night working with Ben Forta's CF8, vol 2, Chap 34, working with <cfajaxproxy>, I was able to do exactly what I wanted and it appears, after some testing, to work exactly as I had envisoned it should.
     I am now calling a JavaScript function (testFileName) from the onChage event on the <input type="file"> or Browse button, which calls my proxy.cfc that contains the server side of the equation. This funciton testFileName (I've run out of cleaver function/file names). The query contained therein hits the database to see if the passed in parameters can pull up an existing file. If they do, the particulars (file name, data attahced, etc.) are returned to the JavaScipt procedure that puts up the error notice. The user can then chose to either overwrite the file or quit. Quiting leaves the your on the Attachment PopUp where he/she started with nothing being uploaded.
     Thanks again for your suggestion. I appreciate your taking the time to do so.
Len

My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message.

My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message. I also tried to remove iTunes from the add/remove sector on Control Panel but it also refused for the same reason. Help, please.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Gpedit , My computer not the local computer; from local computer access others ..

gpedit , My computer not the local computer? Since it put auto at the Other's like place.
From local computer search access others pc, nothing empty to chose neither.

Whatever the Following Computer in the up photo is not the LOCAL=My Computer is an arcane of the OS .
You right, mmc / domain as the capture would work for PC manage. That implying this PC had
been worked on a domain by default since i did searchable other PCs on the SPACE of workgroup ! Four months ago.
To have the domain configure got error below , Router configured Dynamic dns successfully , why reminded a 192.168.1.1 on the DNS IP ? It is router's defaulted. Sharing IP with DNS remote server ?AC DC not forwarded , how to ?
Program on powershell how to run well for getting _ldap._tcp.dc._msdcs.domainname.domain by the way, for weight, port, priority result etc ?

I am having trouble sending an audio signal from my computer (mac pro early 2009) to my TV. Is there some interface or adapter that allows /enables the audio input from my computer to be sent to the TV (R,L signal?) any suggestions

I am having trouble sending an audio signal from my computer (mac pro early 2009) to my TV. Is there some interface or adapter that allows /enables the audio input from my computer to be sent to the TV (R,L signal?) any suggestions

just the audio, eh?. If you were using DVI or DisplayPort that might be different, but for audio alone, it shouldn't be that hard. Just grab a 3.5 mm stereo plug to 2 rca cables adapter. Plug the smaller end into the back of your Mac Pro (or the Front), where you see either the headphone or speaker icon). Alt-click on the speaker icon at the top of your screen to show all audio inputs and outputs. Make sure it's set to Line Out. Plug the red and white end into the audio in jacks on the back of your tv and set it to the correct input. I don't know if your tv will allow just the audio to play. Usually one has to connect up something else, but hopefully I'm wrong. If you were using DVI, or DisplayPort, you'd need an active DVI--HDMI adapter or a DisplayPort to HDMI adapter, but
I don't know for sure
J B

Can I export my sidecar files to two or more hard drives at the same time from one computer?

Can I export my sidecar files to two or more hard drives at the same time from one computer? How do I do this, if it is possible?

Each image is imported into the LR Catalog from just one stated location on disk. And that is where the sidecar gets written.
But if you want, outside of LR, you can have a file sync utility replicate all physical changes within those folders on disk, into other corresponding locations on other drives - which hold a copy of all the same images, and a copy of the sidecars too. This might happen continuously, periodically or on demand depending on the particular tool you use... for example, the Dropbox desktop app.
If you also want to have your LR Catalog replicated, I think this can only be done when LR is not running and using that.

Setting up a Form Application to write to an XML file on a local computer

First, I'm using Flash CS3, and Actionscript3.
I'm trying to set up a data collection form that will save
the results to a file that can later be imported into a database.
This is going to be in a Kiosk at a tradeshow and it won't have
internet access, so I can't send it to an online PHP or ASP, etc,
script.
The form also has several screens, so i thought I'd try to
use the Form Application (I know I can only have one frame on the
timeline when using this flash template with the data components).
I want to try and write the data to a XML file. All the information
I've found is for importing data from an XML file to a web server
rather than sending data to an XML file on a local computer.
I'm trying to use the XML connector,and an XML file that
resides in the same folder as my Flash file, but so far I've had
very little luck writing to that XML file. Do I need to set up a
dataset to send the form data to that will then send the data to an
XML Connector component that will then send the data to the XML
file. Should I use LoadVars instead, and if I do, will I have to
write to a script, or can it also write to an XML file.
If any one has a better idea to do this, please let me know.
Thanks.

Hi,
Flash itself has no filewriting capabilities other then the
SharedObject
stuff.
But why can't you call a php script? You could install
apache, PHP and
MYSQL on the computer running the Flash app and get it all
into the
database in one go.
Otherwise you either need to get going with AIR (Adobe
Integrated
Runtime), or use a wrapper application like Adobe Director
(which has
tons of ways to write to file through it's plethora of
Xtras.) Director
may be 'a bit' hard on your budget if you only use it for
this purpose
though.
The XMLSocket is for connections to some server, local or
remote, not to
a file.
Manno
graphic_pawn wrote:
> First, I'm using Flash CS3, and Actionscript3.
>
> I'm trying to set up a data collection form that will
save the results to a
> file that can later be imported into a database. This is
going to be in a Kiosk
> at a tradeshow and it won't have internet access, so I
can't send it to an
> online PHP or ASP, etc, script.
>
> The form also has several screens, so i thought I'd try
to use the Form
> Application (I know I can only have one frame on the
timeline when using this
> flash template with the data components). I want to try
and write the data to a
> XML file. All the information I've found is for
importing data from an XML file
> to a web server rather than sending data to an XML file
on a local computer.
>
> I'm trying to use the XML connector,and an XML file that
resides in the same
> folder as my Flash file, but so far I've had very little
luck writing to that
> XML file. Do I need to set up a dataset to send the form
data to that will then
> send the data to an XML Connector component that will
then send the data to the
> XML file. Should I use LoadVars instead, and if I do,
will I have to write to a
> script, or can it also write to an XML file.
>
> If any one has a better idea to do this, please let me
know.
>
> Thanks.
>
Manno Bult
http://www.aloft.nl

I have error while testing the system created from a sap business objects template in SAP portal

I have error while testing the system created from a sap business objects template in SAP portal. Error text:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
I configure integration SAP portal and SAP BW system. All system requirements are complied.
Environment
SAP Business Objects 4.0
SAP BW 7.31
1.     I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
2.     Next I setting integration SAP PORTAL with SAP BW system
3.     I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
4.     In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
5. Select Export entry button and binary format file certificate for download. Press download.
6.     Save certificate file in local PC folder
In next step need export certificate file to SAP system. Sequence of step:
1.       Run STRUSTSS02 transaction .
2.       Chose certificate ->import.
3.       Select downloaded certificate file
4.       Select Add to certificate list button and Add to ACL button
5.       Inter System ID and Client(000)
6.       In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
7.       Result – downloaded iview.
8.       In next step I create system from template. System administration->system landscape.
9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
10.   When I created the system and test the connection error occurred: See screen_3
This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.

Did you find a solution?

Windows could not start the Server service on local computer Error 193:0xc1

Hello,
Not able to start Server (lanmanServer) Service in Windows Server 2008 R2
Its a VM and on logging into the Server it sometimes shows as started and then will stop by itself,
If we try to start manually it always gives the error --Windows could not start the Server service on local computer Error 193:0xc1
All dependent services are fine and running ,did sfc,did copy svchost and svcsrv.dll files from a working Server of same.but no help,no shares of this server are accessible since this service is not running
on checking the event log its shows an error "Server is not a valid win32 application"
Please help
Thanks and Regards
Jose

Hi,
Thanks for posting your question in the forum.
I noticed that you have created the same question in another thread. Please understand that we should focus on only one thread for the same question at the same time, please focus on the thread
below you created in the forum. Thanks for your understanding.
http://social.technet.microsoft.com/Forums/en-US/5ba43477-9626-4fdf-872a-d3ecd12835c5/windows-could-not-start-the-server-service-on-local-computer-error-1930xc1?forum=winserverNIS
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

How to handle flat file with variable delimiters in the file sender adapter

Hi friends,
I have some flat files in the ftp server and hope to poll them into XI, but before processing in XI, I hope to do some content conversion in the file sender adapter, according to the general solution, I just need to specify the field names, field seperator, end seperator, etc. But the questions is:
The fileds in the test data may have different amount of delimiters (,), for example:
ORD01,,,Z4XS,6100001746,,,,,2,1
OBJ01,,,,,,,,,,4,3
Some fileds only have 1 ',' as the delimiter, but some of them have multiple ','.
How can I handle it in the content conversion?
Regards,
Bean

Hi Bing,
Plz do refer the following blogs u will get an idea:
File content conversion Blogs
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Vinod.

How to get the FILE COUNT from File directory

Hello,
i have to develop a scenario like, get the file count from source file directory and validate whether the file count is 5 or not. if 5 files exist i need to process those 5 files to DB tables. if file count is not equal to 5 then i need to send a mail to customer that files are missed at source directory. (subject as files were missed at source directory and in content i need to display the file names exist at source file directory. So that missed file will be generated by the customer based on this mail).
Could you please let me know how to get the count of files from source file directory. if it is possible only with UDF please provide the Java code
Best Regards,
SARAN

Do these files have some fixed names?
Can you try to use the option Advanced Selection For Source File to make XI pick all 5 files in one shot?
Check this blog on the same -
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
If this is not a option - BPM sounds the only possible way.
Regards,
Bhavesh

Dynamic Send Port : The FILE send adapter cannot open file C:\Temp for writing. Details: Access is denied.

Hi All,
We have requirement of using ESB toolkit and transforming incoming xml file to edi format. So, we are using ItinerarySelectReceiveXML pipeline for receiving the input from the input location and "EDISend" pipeline for transforming it into EDI and
send it to destination.
Now, the receive pipeline is picking up the file, but it is not processed and sent to destination.
And, we are getting an Access Denied error from Dynamic send port.
Error Description :
The FILE send adapter cannot open file C:\Users\Public\Temp for writing.
Details: Access is denied.
Any Immediate solutions/suggestions are appreciated...Thanks.
Anand

The difference between dynamic and static port would be send handler. For dynamic port, default send handler will be used and for static port the one configured on the port will be used, could you validate this configuration.
Also sometimes, administrative privileges are not "real" administrative privileges and company admins will have limited permissions on C Drive folders. Try writing to some other folder to isolate the issue.
Regards, Ajeet Kumar MCTS Biztalk Server

Testing the File sender from local computer

Similar Messages

Maybe you are looking for