Text wrap while sending a form by email

Hi,
I have sent a form by e-mail.But the text in the form is getting wrapped. If I compare the PDF document in the e-mail with the normal print output the text is not in a readable format in PDF. Can anyone know what's the reason for this.
Regards,
Asha

Hello Asha,
can you tell us a litle bit more about your enviroment? Are you using ABAP or Java? What Web AS Version?
Regards
Gregor

Similar Messages

  • I just got the new Iphone 5 and when I send a message in a group text it keeps sending it as an email and as my phone number. The people in the group text are complaining that it is creating a new group message everytime I text. How do I fix this?

    I just got the new Iphone 5 and when I send a message in a group text it keeps sending it as an email and as my phone number. The people in the group text are complaining that it is creating a new group message everytime I text. How do I fix this?

    Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  t worked, but only for those with PC.  I could not get it to work with Apple Yosemite even with reader installed .  is there a way i can make it work for apple /

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However,  I could not get it to work with Apple loaded with Yosemite even with reader installed .  Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
    Thanks

    LiveCycle = XFA forms.
    afaik - These cannot be used in Apple OSs.
    Be well...

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for thos

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for those with adobe pro.  i could not get it to work with reader.  is there a way i can make it work for reader?

    Noted.
    The LiveCycle user to user forum is across town at:
    Adobe LiveCycle 
    Be well...

  • Need to send Smart form via email through Driver program

    Hi All,
    We need to send smart form via email through a new driver program (z program). Can you please guide me on this.
    I have used the following code to achieve this. We are getting message saying 'Mail request has created' when executed, but the mail is not sent.
    lvs_comm_type = 'INT'.
    lvs_comm_values-adsmtp-SMTP_ADDR = e_mail.
    lvs_comm_values-adsmtp-R3_USER = 'X'.
    lvs_comm_values-adsmtp-ENCODE = '0'.
    call function 'CONVERT_COMM_TYPE_DATA'
    exporting
    pi_comm_type = lvs_comm_type
    pi_comm_values = lvs_comm_values
    pi_screen = ' '
    pi_newid = 'X'
    importing
    pe_itcpo = lvs_itcpo
    pe_device = lvf_device
    pe_mail_recipient = p_mail_recipient
    pe_mail_sender = p_mail_sender
    exceptions
    comm_type_not_supported = 1
    recipient_creation_failed = 2
    sender_creation_failed = 3
    others = 4.
    if sy-subrc ne 0.
    raise COMMUNICATION_ERROR.
    endif.
    control_parameters-device = 'MAIL'.
    output_options-TDIMMED = 'X'.
    output_options-TDDELETE = 'X'.
    CALL FUNCTION fm_name
    exporting
    CONTROL_PARAMETERS = control_parameters
    MAIL_RECIPIENT = mail_recipient
    MAIL_SENDER = mail_sender
    OUTPUT_OPTIONS = output_options
    USER_SETTINGS = space
    EXCEPTIONS
    FORMATTING_ERROR = 1
    INTERNAL_ERROR = 2
    SEND_ERROR = 3
    USER_CANCELED = 4
    OTHERS = 5.
    Thank you

    Hi,
    For sending smartform output into mail you first have to generate spool request and convert it into PDF and then
    only it can be sended into mail, please find the sample code in the mail below:
    http://wiki.sdn.sap.com/wiki/display/sandbox/ConversionofSpoolRequestDataintoPDFandExcelFormatandSenditintoMail
    Mansi
    Edited by: Matt on Jan 29, 2010 8:25 AM - removed code, instead point to wiki that Mansi authored.

  • Sending sapscript form through Email

    Hi,
         I modifyed a std sapscript form for customer statement and that output i want to send to the customer through Email.So now i need a help for further what are the steps need to be do for sending that form by email.Pls be in details so that for me easy to solve this.
    Thanks,
    Rajendra.

    Hi ,
        I  am using the below code to send the form output by mail but it is not working for me.pls correct my code where i want to change so that i can solve my issues.
    DATA: itcpo LIKE itcpo,
    tab_lines LIKE sy-tabix.
    Variables for EMAIL functionality
    DATA: maildata LIKE sodocchgi1.
    DATA: mailpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
    DATA: mailhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
    DATA: mailbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
    DATA: mailtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
    DATA: mailrec LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
    DATA: solisti1 LIKE solisti1 OCCURS 0 WITH HEADER LINE.
    parameter: p_email1 like somlreci1-receiver .
    PERFORM send_form_via_email.
    FORM SEND_FORM_VIA_EMAIL *
    FORM send_form_via_email.
    CLEAR: maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
    REFRESH: mailtxt, mailbin, mailpack, mailhead, mailrec.
    Creation of the document to be sent File Name
    maildata-obj_name = 'TEST'.
    Mail Subject
    maildata-obj_descr = 'Subject'.
    Mail Contents
    mailtxt-line = 'Here is your file'.
    APPEND mailtxt.
    Prepare Packing List
    PERFORM prepare_packing_list.
    Set recipient - email address here!!!
    mailrec-receiver =  p_email1.
    mailrec-rec_type = 'U'.
    APPEND mailrec.
    Sending the document
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    document_data = maildata
    put_in_outbox = ' '
    TABLES
    packing_list = mailpack
    object_header = mailhead
    contents_bin = mailbin
    contents_txt = mailtxt
    receivers = mailrec
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    operation_no_authorization = 4
    OTHERS = 99.
    ENDFORM.
    Form PREPARE_PACKING_LIST
    FORM prepare_packing_list.
    CLEAR: mailpack, mailbin, mailhead.
    REFRESH: mailpack, mailbin, mailhead.
    DESCRIBE TABLE mailtxt LINES tab_lines.
    READ TABLE mailtxt INDEX tab_lines.
    maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
    Creation of the entry for the compressed document
    CLEAR mailpack-transf_bin.
    mailpack-head_start = 1.
    mailpack-head_num = 0.
    mailpack-body_start = 1.
    mailpack-body_num = tab_lines.
    mailpack-doc_type = 'RAW'.
    APPEND mailpack.
    Creation of the document attachment
    This form gets the OTF code from the SAPscript form.
    If you already have your OTF code, I believe that you may
    be able to skip this form. just do the following code, looping thru
    your SOLISTI1 and updating MAILBIN.
    PERFORM get_otf_code.
    LOOP AT solisti1.
    MOVE-CORRESPONDING solisti1 TO mailbin.
    APPEND mailbin.
    ENDLOOP.
    DESCRIBE TABLE mailbin LINES tab_lines.
    mailhead = 'TEST.OTF'.
    APPEND mailhead.
    Creation of the entry for the compressed attachment
    mailpack-transf_bin = 'X'.
    mailpack-head_start = 1.
    mailpack-head_num = 1.
    mailpack-body_start = 1.
    mailpack-body_num = tab_lines.
    mailpack-doc_type = 'OTF'.
    mailpack-obj_name = 'TEST'.
    mailpack-obj_descr = 'Subject'.
    mailpack-doc_size = tab_lines * 255.
    APPEND mailpack.
    ENDFORM.
    Form GET_OTF_CODE
    FORM get_otf_code.
    DATA: BEGIN OF otf OCCURS 0.
    INCLUDE STRUCTURE itcoo .
    DATA: END OF otf.
    DATA: itcpo LIKE itcpo.
    DATA: itcpp LIKE itcpp.
    CLEAR itcpo.
    itcpo-tdgetotf = 'X'.
    Start writing OTF code
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
    form = 'Z2006FICSE'
    language = sy-langu
    options = itcpo
    dialog = ' '
    EXCEPTIONS
    OTHERS = 1.
    CALL FUNCTION 'START_FORM'
    EXCEPTIONS
    error_message = 01
    OTHERS = 02.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    window = 'MAIN'
    EXCEPTIONS
    error_message = 01
    OTHERS = 02.
    Close up Form and get OTF code
    CALL FUNCTION 'END_FORM'
    EXCEPTIONS
    error_message = 01
    OTHERS = 02.
    MOVE-CORRESPONDING itcpo TO itcpp.
    CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
    result = itcpp
    TABLES
    otfdata = otf
    EXCEPTIONS
    OTHERS = 1.
    Move OTF code to structure SOLI form email
    CLEAR solisti1. REFRESH solisti1.
    LOOP AT otf.
    solisti1-line = otf.
    APPEND solisti1.
    ENDLOOP.
    ENDFORM.
       Hope i can expect the feedback soon from you guys.
    Thanks,
    Rajendra.

  • Sending sapscript form by email

    dear experts
    i want to send  sapscript forms by email from sap. how is it done. is there any configuration that needs to be done

    Hello,
    I have done in case where we are sending to an external mail id.
    Check the code it may help u.
    REPORT Z_SCRIPT .
    DATA: itcpo LIKE itcpo,
          tab_lines LIKE sy-tabix.
    Variables for EMAIL functionality
    DATA: maildata   LIKE sodocchgi1.
    DATA: mailpack   LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
    DATA: mailhead   LIKE solisti1 OCCURS 1 WITH HEADER LINE.
    DATA: mailbin    LIKE solisti1 OCCURS 10 WITH HEADER LINE.
    DATA: mailtxt    LIKE solisti1 OCCURS 10 WITH HEADER LINE.
    DATA: mailrec    LIKE somlrec90 OCCURS 0  WITH HEADER LINE.
    DATA: solisti1   LIKE solisti1 OCCURS 0 WITH HEADER LINE.
    PERFORM send_form_via_email.
          FORM  SEND_FORM_VIA_EMAIL                                      *
    FORM  send_form_via_email.
      CLEAR:    maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
      REFRESH:  mailtxt, mailbin, mailpack, mailhead, mailrec.
    Creation of the document to be sent File Name
      maildata-obj_name = 'TEST'.
    Mail Subject
      maildata-obj_descr = 'Subject'.
    Mail Contents
      mailtxt-line = 'Here is your file'.
      APPEND mailtxt.
    Prepare Packing List
      PERFORM prepare_packing_list.
    Set recipient - email address here!!!
      mailrec-receiver = '[email protected]'.
      mailrec-rec_type  = 'U'.
      APPEND mailrec.
    Sending the document
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           EXPORTING
                document_data              = maildata
                put_in_outbox              = ' '
           TABLES
                packing_list               = mailpack
                object_header              = mailhead
                contents_bin               = mailbin
                contents_txt               = mailtxt
                receivers                  = mailrec
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                operation_no_authorization = 4
                OTHERS                     = 99.
    ENDFORM.
         Form  PREPARE_PACKING_LIST
    FORM prepare_packing_list.
      CLEAR:    mailpack, mailbin, mailhead.
      REFRESH:  mailpack, mailbin, mailhead.
      DESCRIBE TABLE mailtxt LINES tab_lines.
      READ TABLE mailtxt INDEX tab_lines.
      maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
    Creation of the entry for the compressed document
      CLEAR mailpack-transf_bin.
      mailpack-head_start = 1.
      mailpack-head_num = 0.
      mailpack-body_start = 1.
      mailpack-body_num = tab_lines.
      mailpack-doc_type = 'RAW'.
      APPEND mailpack.
    Creation of the document attachment
    This form gets the OTF code from the SAPscript form.
    If you already have your OTF code, I believe that you may
    be able to skip this form.  just do the following code, looping thru
    your SOLISTI1 and updating MAILBIN.
      PERFORM get_otf_code.
      LOOP AT solisti1.
        MOVE-CORRESPONDING solisti1 TO mailbin.
        APPEND mailbin.
      ENDLOOP.
      DESCRIBE TABLE mailbin LINES tab_lines.
      mailhead = 'TEST.OTF'.
      APPEND mailhead.
    Creation of the entry for the compressed attachment
      mailpack-transf_bin = 'X'.
      mailpack-head_start = 1.
      mailpack-head_num = 1.
      mailpack-body_start = 1.
      mailpack-body_num = tab_lines.
      mailpack-doc_type = 'OTF'.
      mailpack-obj_name = 'TEST'.
      mailpack-obj_descr = 'Subject'.
      mailpack-doc_size = tab_lines * 255.
      APPEND mailpack.
    ENDFORM.
         Form  GET_OTF_CODE
    FORM  get_otf_code.
      DATA: BEGIN OF otf OCCURS 0.
              INCLUDE STRUCTURE itcoo .
      DATA: END OF otf.
      DATA: itcpo LIKE itcpo.
      DATA: itcpp LIKE itcpp.
      CLEAR itcpo.
      itcpo-tdgetotf = 'X'.
    Start writing OTF code
      CALL FUNCTION 'OPEN_FORM'
           EXPORTING
                form     = 'Z08V3_COLLI'
                language = sy-langu
                options  = itcpo
                dialog   = ' '
           EXCEPTIONS
                OTHERS   = 1.
      CALL FUNCTION 'START_FORM'
           EXCEPTIONS
                error_message = 01
                OTHERS        = 02.
      CALL FUNCTION 'WRITE_FORM'
           EXPORTING
                window        = 'MAIN'
           EXCEPTIONS
                error_message = 01
                OTHERS        = 02.
    Close up Form and get OTF code
      CALL FUNCTION 'END_FORM'
           EXCEPTIONS
                error_message = 01
                OTHERS        = 02.
      MOVE-CORRESPONDING itcpo TO itcpp.
      CALL FUNCTION 'CLOSE_FORM'
           IMPORTING
                result  = itcpp
           TABLES
                otfdata = otf
           EXCEPTIONS
                OTHERS  = 1.
    Move OTF code to structure SOLI form email
      CLEAR solisti1. REFRESH solisti1.
      LOOP AT otf.
        solisti1-line = otf.
        APPEND solisti1.
      ENDLOOP.
    ENDFORM.
    I am sending to [email protected].
    So proceed in similar manner and let me know if u face any problem.
    Regards

  • Error occured while sending a form in test in HCM Process & Forms

    Hi
    An error occured while testing my process in Design Time Tool. All the process, form, and workflow are consistent and activated, however when I send the form in test program available in Design Time Tool I get a Short Dump (as below) followed by the error "Workflow Item Not Found, Workflow Not Started."
    Category               ABAP Programming Error
    Runtime Errors         MESSAGE_TYPE_UNKNOWN
    ABAP Program           CL_POBJ_CASE==================CP
    Application Component  PA-AS
    Date and Time          23.02.2012 09:38:34
    Short text
    Message type " " is unknown.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_POBJ_CASE==================CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    Only message types A, E, I, W, S, and X are allowed.
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_UNKNOWN" " "
    "CL_POBJ_CASE==================CP" or "CL_POBJ_CASE==================CM00D"
    "IF_POBJ_CASE~CREATE_CASE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    Looking forward to your expert advice to resolve this error.
    Best regards
    Imran

    This can be a few things....
    1. Make sure you set up your number range for CASE Mgmt (t-code SCASE_NUMBERANGE)
    2. if the POBJ_MODEL is missing in your CASE Mgmt environment
    3. if the doc id for your object models (process, scenario, case) are somehow "out of whack" (not matching) between CASE mgmt, SCASE_CUSTOMIZING and SRMREGEDIT
    4. authorization issues (which it more likely is)... I know it sounds weird, but even giving you SAP_ALL will not do it (even it is missing some of the auth objects). You have to be able to read/write to CASE Mgmt (so the related auth objects are needed....look for ones with S_SRM* or S_SCM*). Also, WF-BATCH user needs this auth as well!
    This part can be a PAIN to get sorted out.

  • Error while sending PDF file by Email

    Hi All,
    I have a requirement to send multiple files by Email attachement from SAP to internet address.
    All files sent correctly, except one PDF file.
    I have 2 spools, and I am using FM CONVERT_OTFSPOOLJOB_2_PDF to get PDF data for Spool.
    Then I am converting the 134 length PDF data to 255 Email Attachement binary table.
    Now I have 2 file F1.PDF and F2.PDF, in SAP Office outbox and in receivers email, F2.PDF opening fine, however for F1.PDF I am getting some error no 109 in Adobe, which says "There was an error processing a page.There was a problem reading this document. (109)".
    Please help in figuring out the reason for this.
    Additional Information F2.PDF has some text data (SAP Script output) and F1.PDF has some text data with logo (SAP Script Output)
    Thanks in advance

    hi check out following code..
    REPORT ZRICH_0003.
    DATA: ITCPO LIKE ITCPO,
    TAB_LINES LIKE SY-TABIX.
    Variables for EMAIL functionality
    DATA: MAILDATA LIKE SODOCCHGI1.
    DATA: MAILPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
    DATA: MAILHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
    DATA: MAILBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
    DATA: MAILTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
    DATA: MAILREC LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
    DATA: SOLISTI1 LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
    PERFORM SEND_FORM_VIA_EMAIL.
    FORM SEND_FORM_VIA_EMAIL *
    FORM SEND_FORM_VIA_EMAIL.
    CLEAR: MAILDATA, MAILTXT, MAILBIN, MAILPACK, MAILHEAD, MAILREC.
    REFRESH: MAILTXT, MAILBIN, MAILPACK, MAILHEAD, MAILREC.
    Creation of the document to be sent File Name
    MAILDATA-OBJ_NAME = 'TEST'.
    Mail Subject
    MAILDATA-OBJ_DESCR = 'Subject'.
    Mail Contents
    MAILTXT-LINE = 'Here is your file'.
    APPEND MAILTXT.
    Prepare Packing List
    PERFORM PREPARE_PACKING_LIST.
    Set recipient - email address here!!!
    MAILREC-RECEIVER = '[email protected]'.
    MAILREC-REC_TYPE = 'U'.
    APPEND MAILREC.
    Sending the document
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    DOCUMENT_DATA = MAILDATA
    PUT_IN_OUTBOX = ' '
    TABLES
    PACKING_LIST = MAILPACK
    OBJECT_HEADER = MAILHEAD
    CONTENTS_BIN = MAILBIN
    CONTENTS_TXT = MAILTXT
    RECEIVERS = MAILREC
    EXCEPTIONS
    TOO_MANY_RECEIVERS = 1
    DOCUMENT_NOT_SENT = 2
    OPERATION_NO_AUTHORIZATION = 4
    OTHERS = 99.
    ENDFORM.
    Form PREPARE_PACKING_LIST
    FORM PREPARE_PACKING_LIST.
    CLEAR: MAILPACK, MAILBIN, MAILHEAD.
    REFRESH: MAILPACK, MAILBIN, MAILHEAD.
    DESCRIBE TABLE MAILTXT LINES TAB_LINES.
    READ TABLE MAILTXT INDEX TAB_LINES.
    MAILDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( MAILTXT ).
    Creation of the entry for the compressed document
    CLEAR MAILPACK-TRANSF_BIN.
    MAILPACK-HEAD_START = 1.
    MAILPACK-HEAD_NUM = 0.
    MAILPACK-BODY_START = 1.
    MAILPACK-BODY_NUM = TAB_LINES.
    MAILPACK-DOC_TYPE = 'RAW'.
    APPEND MAILPACK.
    Creation of the document attachment
    This form gets the OTF code from the SAPscript form.
    If you already have your OTF code, I believe that you may
    be able to skip this form. just do the following code, looping thru
    your SOLISTI1 and updating MAILBIN.
    PERFORM GET_OTF_CODE.
    LOOP AT SOLISTI1.
    MOVE-CORRESPONDING SOLISTI1 TO MAILBIN.
    APPEND MAILBIN.
    ENDLOOP.
    DESCRIBE TABLE MAILBIN LINES TAB_LINES.
    MAILHEAD = 'TEST.OTF'.
    APPEND MAILHEAD.
    Creation of the entry for the compressed attachment
    MAILPACK-TRANSF_BIN = 'X'.
    MAILPACK-HEAD_START = 1.
    MAILPACK-HEAD_NUM = 1.
    MAILPACK-BODY_START = 1.
    MAILPACK-BODY_NUM = TAB_LINES.
    MAILPACK-DOC_TYPE = 'OTF'.
    MAILPACK-OBJ_NAME = 'TEST'.
    MAILPACK-OBJ_DESCR = 'Subject'.
    MAILPACK-DOC_SIZE = TAB_LINES * 255.
    APPEND MAILPACK.
    ENDFORM.
    Form GET_OTF_CODE
    FORM GET_OTF_CODE.
    DATA: BEGIN OF OTF OCCURS 0.
    INCLUDE STRUCTURE ITCOO .
    DATA: END OF OTF.
    DATA: ITCPO LIKE ITCPO.
    DATA: ITCPP LIKE ITCPP.
    CLEAR ITCPO.
    ITCPO-TDGETOTF = 'X'.
    Start writing OTF code
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
    FORM = 'ZTEST_FORM'
    LANGUAGE = SY-LANGU
    OPTIONS = ITCPO
    DIALOG = ' '
    EXCEPTIONS
    OTHERS = 1.
    CALL FUNCTION 'START_FORM'
    EXCEPTIONS
    ERROR_MESSAGE = 01
    OTHERS = 02.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    WINDOW = 'MAIN'
    EXCEPTIONS
    ERROR_MESSAGE = 01
    OTHERS = 02.
    Close up Form and get OTF code
    CALL FUNCTION 'END_FORM'
    EXCEPTIONS
    ERROR_MESSAGE = 01
    OTHERS = 02.
    MOVE-CORRESPONDING ITCPO TO ITCPP.
    CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
    RESULT = ITCPP
    TABLES
    OTFDATA = OTF
    EXCEPTIONS
    OTHERS = 1.
    Move OTF code to structure SOLI form email
    CLEAR SOLISTI1. REFRESH SOLISTI1.
    LOOP AT OTF.
    SOLISTI1-LINE = OTF.
    APPEND SOLISTI1.
    ENDLOOP.
    ENDFORM.

  • Send PDF form to email address user enters in textfield on form.

    I would like to be able to allow the person using the form to choose what email address the PDF form is emailed to. I read this post which sounds like what I want but I keep getting a Submit Cancelled error. The email does get generated and the form is attached as a PDF so that part works okay.
    http://forums.adobe.com/message/4167414#4167414
    This is the code I am using as I only need the To: address populated.
    form1.Page1.Button1::preSubmit:form - (JavaScript, client)
    var strToAddress
    //Capture the values from the form fields.
    strToAddress = txtToAddress.rawValue;
    event.target.submitForm({cURL:"mailto:"+ strToAddress,cSubmitAs:"PDF",cCharset:"utf-8"});

    Hi,
    There is an example here: http://assure.ly/eUR4wJ.
    // Declare the variable
    var vEmail;
    // Check that the email field is not null
    if (txtToAddress.rawValue !== null) {
         vEmail = txtToAddress.rawValue;
    // Send email
    event.target.submitForm({cURL:"mailto: " + vEmail + "?subject=&body=",cSubmitAs:"PDF",cCharset:"utf-8"});
    Niall

  • How to send offline forms as email in Portal level.

    hello friends,
    i am struck with a task.I need to send adobe forms as attachment to email to non sap users(i,e offline mode).this task has to be configured for managers using mss service(i.e through portal)...
    how this can be done?
    any material will be highly appreciated.

    Hi,
    Try to use this one
    CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
    Hope it can solve your problem!
    Good luck!
    Tao

  • Send Smart Forms within emails (html) Problems with format

    Dear all,
    the ABAP report SF_XSF_DEMO1 is a demo report which converts a certain smart form into HTML and then sends it as an email in html format.
    Sending the email is possible without any problems but I am wondering about the email format.
    <a href="http://www.imgbox.de/show/img/e4QvgzsS4L.jpg" title="Bilder hochladen">This screenshot shows how the email looks like.</a>
    I am not happy with the email layout as the Smart Form "SF_XSF_DEMO1" is designed in a different way.
    What do I have to adapt within the report in order to send an email that really looks like the Smart Form? Or is it a customizing issue?
    (I would like to avoid having to send the Smart Form as PDF attachment...)
    Thanks for you help!
    Kristian Kindler

    Hi Kristian,
    When ever you send a smartform output as an HTML email, the system generates automatic style sheets which are not supported in many email clients such as Outlook 2007, hence you will face a formatting issue. We faced the same issue and had do it it like this:
    Build a BSP page similar to the output which you want to send as an email. Now you can use the BSP URL to send the html email using cl_bcs class.
    I have documented this in my article below-
    http://divulgesap.com/blog.php?p=NDA=
    Hope it helps.
    Regards,
    Ravikiran

  • Send ADOBE FORM as email

    hi all,
    Does anybody knows what all parameters to be passed to FM 'FP_JOB_OPEN' to send the adobe form as an email .

    Jay,
    Have a look at this [thread|Re: Sending PDF forms (created using SFP) as Email Attachment;
    Chintan

  • Sending Adobe forms through Email and Fax

    Hi ,
    I have created an Adobe Form i.e. PO Form,
    whose print/driver  program is customised / based on SAPFM06P and routine used is ADOBE_ENTRY_NEU.
    So , now I use the transaction ME22N and use the External Send option i.e sending Email , but the Email is getting sent to Spool instead of SOST.
    So what changes do I need to make .
    Can anyone tell me how do we send an Adobe Form through email * in which routine is based on Adobe_entry_neu .
    Thanks  in advance,
    Rohit

    Hi,
    Thanks for reply
    The link u mentioned utilises Objects.. but can we send internet mail using this?
    As we cannot change RECIPIENT TYPE in this case in the object.
    I used this format in the program but the attachment is going to EXpress inbox. and goes to my SAP Inbox instead of Email .
    So what changes we need to do for this.
    Alternatively,  can we use FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' for this purpose?
    Edited by: Rohit Pareek on Feb 3, 2009 3:36 PM

  • Unable send ADOBE form through email as attachment

    Hello experts,
    I was trying the [tutorial |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed] on ADOBE interactive form through GP.
    I am not able to send a form as an attachment as specifies in the document.
    I have checked for all the required settings mentioned in the document and all seems to be ok.
    Can anyone please provide a ray of help on how do I enable a ADOBE form to be passed as an attachment through email.
    Thank you.
    Ashutosh

    Hi,
    just use a "Standard button", select it and go to the "Object" -> "Field" tab. Set the control type to "Submit". Go to the "Submit" tab. Set the submit format (e.g. PDF) and set the URL to "mailto:<receiver's email address>".
    This will work fine without any JavaScript.
    Take care,
    Thomas

Maybe you are looking for