Texting on a Pearl is worse than getting teeth pulled..

The only way I can type a text message is to hit space after every letter then go back and delete the spaces. If I do not put the space in and continue to the next letter the BB will change the entire word. Any suggestions?
Even typing "ttyl" is quiet a task. Often the BB provides me a list of words that are completely unrelated to what I am typing. For example, if I try to type “gtg” when I hit the “g” the first word that comes up is ghost.. Are you kidding me!?
Has this issue been addressed to someone of importance at BB?
Kate McCormack

Welcme t the Frums!
If you are not used to suretype the pearl is definitely different kind of texting. Especially if you come from Multitap or t-9.
Here is a couple of links to see if this might help you switch yours from sure type.
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB10261&sliceId=SAL_Pub...
Nurse-Berry
Follow NurseBerry08 on Twitter

Similar Messages

Support getting even worse than before

3 days, and support haven't even acknowledged my SR. Does anyone else feel that its getting even worse than it already was?

"Sorry but the analyst is in the US and won't be available for another 6 hours".
Not good enough, I asked for it to be treated by someone in Europe.
Why not propose that someone in Europe looks at it instead of saying that the analyst isn't available? Plus, she said that she'd look and see if they had enough resources to deal with the SR. Sorry but this bs didn't happen 3 or 4 years ago. I can't say to MY clients that Oracle haven't got the resources to fix a problem.
Good product, bad support.
Matt

Video output quality worse than AppleTv 1

Anyone else who owns an atv1 found video looks worse?
I'm not talking about actual video playback but the video output on 2
AppleTV1 looked great through my plasma even though it's not full HD
1080p over hdmi on 1 scaled by the plasma consistently looked best, with crisp but smooth edges to text and GUI.
Atv2 720p over hdmi looks consistently worse - it all looks oversharpened and over contrasty, with text in particular looking very jagged as well as the spinning timer wheel looking pixellated now
Watching a slideshow there seemed to be visible artefacts as some images moved or scaled whereas atv1 just looked silky smooth
Maybe the current GUI text and icons are not as smooth, maybe less antialiasing, poorer quality gpu
Maybe my plasma downscales 720p worse than 1080p - I need to check on the full HD set in another room but first impressions are not that good
Video playback seems strangely artificial too, almost as though the frame rate has been sped up slightly
Weird as the set should handle 50/60Hz without issue

So a few days in it's growing on me.
There's definitely something different about menu graphics but actual video quality for playback is excellent though I'm not sure it's not dropping/catching up frames at times.
I've watched some HD movie trailers and they look excellent.
Video navigation is considerably improved over ATV1, with FF / RW actually working reasonably well when they didn't before over the same connection. Changing chapters gives immediate starts and buffering seems considerably quicker - at least some of this must be due to newer hardware.
I don't like the top level menu much and preferred the older system but you can pretty much stay in Computers to watch own content.
Video playlists don't work properly which is poor but it took ages to get them enabled on ATV1.
There are many glitches but hopefully they'll get ironed out over time.

The quality of built-in camera on macbook pro with retina display is far worse than any other mac. Why?

I just got the new macbook pro with retina display like a week ago and I've been noticing that the quality of the built-in camera on it is so bad.
It's even worse than my 2009 iMac or my sister's 2012 13" macbook pro. I don't get why this is a facetime HD built-in camera when i can obviously see that is not even near HD. Or is it just my computer. Do i have to bring it to the apple store??

it's advertised 720p so yes it is the same as all the other MBP. it may just be the resolution of your monitor is stretching the pixels. Don't worry about bringing it to the apple store.

When i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it

when i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it help

Hello Todd:
I had this very same problem when trying to activate iMessage and Facetime on my iPad. When I signed into my account, I actually wasn't even presented with the option of a phone number - notwithstanding the fact that I was contacting others (and being reached by others) by my phone number on my iPhone. Having both the iPad and the iPhone on, I kept trying to turn off and on both iMessage and Facebook in Settings on both my iPad and iPhone, hoping that that they would eventually sync. But this proposed solution by others was unsuccessful for me.
Then, I found out what the problem was: When my iPhone was activated, it automatically registered my phone number for contact purposes. I was using iMessage on my iPhone for quite some time without actually being signed into my Apple ID account. When another device - such as an iPad or iPod - is being used for iMessage or Facebook, you are prompted to sign into your Apple account, using your username and password. These two devices will not register your phone number as an option for contact unless your iPhone is signed into your Apple account as well. In other words: your phone number will not be synced.
Go into your "Settings" on your iPhone and click on "Messages". Scroll down and click on "Send & Receive" (which should be followed by your phone number). On the next page, you will be able to determine whether or not your iPhone is using the Apple ID for messaging purposes. (Note: This information applies for Facetime as well.) If it is using your Apple ID for messaging, than at the top, you will see "Apple ID: <your particular e-mail account>" in Blue text. However, if you are not using your Apple ID for messaging, than you will see the words: "Use your Apple ID for message". Even though below this you will see your phone number checked as the contact source, you will want to click the tab that says, "Use your Apple ID for message". Sign into your account (just as you must sign in for iMessage on your other devices), and just choose your phone number as the "Send & Receive" contact. (The option of the e-mail will be there too, but you don't have to check it. And later on, you can delete it as an option.)
Now that all of your devices are signed in using your Apple ID, the other devices should register your phone number as a choice. It may take a little while, however. What I did was sign out of iMessage on my iPad, and then sign in again. If the option didn't appear, I just went back and signed in again, and kept doing this until the option for the phone number appeared.
Again, this will work for Facetime as well. The solution is to sync your iPhone account with the other devices by using your Apple ID for messaging (and Facetime) purposes.
I hope that this works for you, Todd! ~ Brian

Premiere Elements 8 is worse than useless to me

I have to admit, I can't explain why I'm still trying to make Premiere Elements 8 work. I should have given up and moved to another software program by now. I've been on the phone twice with the Customer Service group in India, for over half an hour at a time. Each time they insist they've solved my problem, yet it keeps getting worse. Now, I'm not only having uncontrolled and unexplained system crashes, but hours and hours of work are now corrupted and totally wasted.
Here is a list of the problems I'm having:
1. The primary problem is that Premiere Elements 8 crashes and shuts down in the middle of work with no warning or notice. It happens after about 3-5 minutes of using the software, so I've gotten in the habit of saving my work every time I do anything, no matter how small. Needless to say, you can chart my progress with a sundial. Tedious does not do the process justice.
2. When I save the work, I will get a Project Save Error. It tells me to save to a new location. Of course, it won't let me do that, so I have to exit the program without saving my most recent work. Again, this happens about every 3-5 minutes.
3. Occasionally, when I'm working with a timeline, as I move the cursor up to the menus at the top of the screen, if I am selecting the File or Edit menu, the timeline will scroll left on its own - if I move the cursor off of the Edit or File menu, the scrolling stops.
4. When I am working on a timeline, I will get a "System Memory Running Very Low" warning, along with advice to save immediately and proceed with caution. Of course, when I get that warning, it is already too late, as any attempt to save the work causes the program to crash.
5. Today, we've seen a new thing, and it's completely destroyed two entire projects. When I try to open projects I've previously worked on, large sections of them appear as blood red with the words "Media Offline" in a number of languages. These red sections appear not only on the organizer, but in the timeline as well. It's as if Premiere Elements 8 can't find the media I copied into the timeline even though I've been working on the project for days and have not moved the media from the folder where it always sits.
Saving work after every task - no matter how small - makes doing anything painfully slow and mind-numbingly tedious, but at least it worked - until today. Now, hours and hours of work have been rendered absolutely wasted. I've never encountered a software program with so many fundamental problems. It's almost as if it was created by amateurs. I can honestly say that it does nothing well.
As I said, I've been on the phone twice now with the problem solving group in India, and while they are very nice and courteous, they've done nothing to solve the problems. In fact, the problems have become worse, although I can't say it's because of anything they've done. Both times, they've assured me that they've fixed the problems, and the software works fine while I am on the phone with them - for about 2 or 3 minutes. But then, it works fine for me for the same length of time.
To be honest, I'm not sure why I would call them back. I'll spend an hour clicking on tabs only to be assured that my problems have been solved. Then, 5 minutes later I'm dealing with the same situation - or worse.
I've tried every solution listed on-line for the crashes. I have the 8.01 update, I have the latest video drivers, I've done all of the steps it recommends. Every day that I use the software, it performs worse than the day before.
I'm not sure why I'm writing this - I think I've reached the end of my rope. I doubt these problems can be fixed - maybe I just have a defective copy, who knows. But, I am very close to demanding my money back and saying goodbye to Adobe products for the future.
Thanks for the forum in which to vent.

This is aimed at Premiere Pro, but may help
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0

I have the iPhone 4 and just updated to iOS 6 and all my text messages are gone. Can I get them back?

I have the iphone 4 and just updated to iOS 6 and all my text messages are gone. Can I get them back?

Group messaging simply puts all replies in one conversation in Messages. It doesn't prevent the behavior you experienced.
My suggestion which would be much easier in my opinion, is rather than do a text, send out an email and use bcc: , which will keep the audience hidden from each recipient.
Otherwise, if you're determinted to do only texts, the only way is to send your message to one person at a time. You can of course copy/paste your msg each time which might be helpful.

Just Updated to Firefox 26.0...Hanging Worse Than Ever.

I just updated to FireFox 26.0 a few hours ago, and now when I visit a site like Wonkette.com, the browser hangs are worse than ever before...and they were bad before. My browser is hanging (becomes completely unresponsive) minutes at a time before it either loads the page, or tries to load it and I get a script error (which takes more minutes to pop up while the browser's unresponsive) before it loads.
God help you if you go anywhere with an IntenseDatabase commenting system or any kind of embedded video player. I have on no add-ons or plug-ins, so it is not that (and they are all up-to-date, anyway, but that's irrelevant).
No, this is not something solved by going into Safe Mode - the seeming catch-all cure that never works, either - so don't even offer that up as a solution. Thanks.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

New replacement battery worse than old one

My Ibook 12" and battery were on the recall list. I didn't notice to much in the way of heat or bad battery life before the recall, but I thought this was a good chance to get a new battery. Well the new one came and it is way worse than the old one. Fan is running almost constantly, poor battery life, the hard drive side is getting very hot, Charger is running hot. I don't think I want to keep the new battery, any advise.
Thanks in advance

Hi josh and welcome to Apple Discussions.
Firstly, check to see if your new battery is also on the recall list. It has happened…
Secondly, your new battery is subject to Apple's standard 90 day warrantee. If it is defective, irrespective of its recall status, then it should be replaced. Contact your local Applecare and explain, calmly and politely, the problems that you are having and your concerns for your own safety and that of your iBook. An iBook's fan shouldn't run constantly and the charger shouldn't be uncomfortably hot.
You'll do no harm, and might do some good, by doing a PMU reset:
1. If the computer is on, turn it off.
2. Reset the power manager by simultaneously pressing and then releasing Shift-Control-Option-Power on the keyboard. Do not press the fn (Function) key while using this combination of keystrokes.
3. Wait at least 5 seconds.
4. Press the Power button to restart the iBook
Good luck,
Adrian

Is my iPad 2 screen dead, or is it worse than that?

My iPad 2 has suddenly stopped responding. I had put it to sleep by closing the cover, and when I opened it, the screen was black. There have been no drops or other obvious mistreatment.
So I held down the power button, ostensibly to shut it down. No response. Held down the button again, ostensibly to start it up: no response. Tried that many times with same result. Charged the iPad overnight. Still no response (and no little chime sound that usually happens when I plug in to AC power).
iTunes can see the iPad, so maybe the screen is dead. But with the absence of all responses of any kind, I'm wondering whether it's worse than that.
I'm running iOS 7.0.4, so I suppose I could update to 7.0.6 and see if that helps, but since updates can be dodgy, I thought I'd save that as a last resort. (And yes, my AppleCare coverage is history.)
Any thoughts?

Ralph Landry1 Maryland Re: Is my iPad 2 screen dead, or is it worse than that? Apr 14, 2014 6:11 PM (in response to gyandev) Placing your iPad in recovery mode erases all content and settings, why you would do that in your case is a total mystery. You lose everything doing that.
There are alot of problems that could have caused you to have to do this. And no you do not loose everything is you have made regular backups.
Here are some reasons
1) itunes makes a new update for your device, there system is so overloaded with people downloading it that some people who downloaded it our missing packets of information this causes an incorect installation and leads to many pieces of hardware malfunctioning
2)usb conection will sometimes turn on and off during some updates, the program itunes dosent seem to check to make sure all the information went through to complete the installation
when either 1 or 2 occurs it is typically in my expereice that a traditional plug it into itunes and do a recovery will not work, you need to bypass several glitchs the IOS update has caused, which may appear to be hard ware glichs IE battery, screen or even after every attempt the update will just stop.
Their are several key components that make up electronic devices
Ram and catch, they require power or electricty to store data, you either need to drain or remove the battery (sometimes residual charge is left in electronic devices... or you may be able to by pass it or in some situations cause the device to ignore the miss writen data.
The battery may say bad on a basic diagnostic test that apple does, but in fact its perfectly fine.
another piece is the storage media, flash and rotaional drives do not need power to store information only to read/write. Individual sectors will go bad over time, and sometimes falsh data that wasn't caught before this point will be written here.
some batters actually have memory,, HDD and storage media and cpu's all have catch which may need to be wiped clean to make a device functioning the method for doing this is differnt for every piece of hardware and sometimes you do not need to take it apart to do it.
There is also ram, which again needs power to store data and will also make bad sectors over time..
if there your device is fully functioning but seems to be a bit slower/ not as good than when you first recieved it, you may need to consider a complete reset. You might notice when your done that the ram size is different that the storage drive has decreased, those are some of the bad sectors that the computer with its long use produced.
In most cases where there is some type of glich that cannot be solved simply by plugin it into Itunes, you might just need to do this. There are several methods posted, and i have tried them all, and most of the time when i needed them they do not work... I had to think, about this..
I needed to do a full recovery, itunes will crash half way through/ will not do the recovery, i need to provide power while placing the device in DFU mode(what i call a hard rest because its like hitting the master reset), because there is a problem/ glich when i try it pluged into a computer I need to use land power, than i need to conect it to itunes..
IT always works, the other methods do not account for the multitude of malfunctions an operating system can cause. This helps to ignore any catch problems, when you conect to itunes it will finish it without a hitch. than you can place all your apps, photos songs ect back in there.
I have had to do this for my own IOS device as well as several others. I typically do this even for random people or i tell them how to do this. Most of them come to me after being poorly disapointed with what the apple tech said.. for me its like if i took my car in for inspection and they said we had to replace the head piston, headmanifold ect, when whats wrong is just a loose wire...
This method should be done prior to doing any expensive fix's as some of the problems you have "fixed" where never really there..
when i was 8 my farther gave me a SCSi hdd that the technitions at his work couldnt fix/ get to work.. He though i would take it apart and see how it worked.. I read the manual, and power scematic, and i came up with my own fix.. plug a jumper into the - and the + jumper to clear the catch while power was going through.. it worked I had a working scsi.. that thing was bigger than an airport extreme curently on the market. I have always had the ability to trouble shoot sense i was alittle boy... I have fixed garmiin GPS as well i wish they still had the physical power switch and not the analog (it was so much easer to reboot them... I was an aircraft maintainer, i have fixed several other computer problems network issuse, hard ware and so on.. Although i have never taken classes in any of it i have learned on my own, and i understand how the device work rather than being told steps to fix it I can find solution where others cannot because i know how they work.. I think that is better than any colledge grad with no reall world experience in true problem solving.

First 6 core MP results with Logic...and they're worse than the quad

Starting a new thread for this...
Here's the first report I've seen of 6 cores on Logic. Logic shows 6 bars in the CPU meter. But he ran the "evan" benchmark and performance was worse than on a quad at a lower clock speed, only 47 tracks. For comparison, 4 cores (with HT enabled) at 2.26 gave 50 tracks - the new machine has two more cores and 47% higher clock speed.
http://macperformanceguide.com/Reviews-MacProWestmere-LogicStudio.html
For comparison, a while back I simulated six cores by disabling two on my eight core MP 2.26 and got 32 tracks. The difference matches the difference in clock speed. In my test the result for six cores was identical to that of four cores with hyperthreading disabled. My guess is that with the current version of Logic, the six core machines might get a big speed boost if two of the cores are disabled, basically turning it back down to a quad - my estimate would be about 73 tracks.
Logic has lacked support for new machines before, but this is the first time I've actually seen performance get worse with a new machine with more cores (and much faster clock speed). If this doesn't provide incentive for Apple to update for better support of cores, I don't know what will.

Exactly. You would think that if the app wasn't programmed to support four cores, the worst case scenario would be that it would just use four of them and provide the same performance as a quad. But instead it seems like the extra cores confuse the app and it actually performs considerably worse than a quad.
No question they are due for a Logic update asap or get some bad press once word gets out.

Camera Raw 6.1pre - scrolling performance worse than in CR6 for me

Hi
I like the quality of the new processing in CR6, but the performance is much worse than in CS4/CR5.x. This is especially annoying when you try to scroll in a Raw file using the hand-tool. But then I saw the 6.1 prerelease announced containing "performance enhancements designed to improve the responsiveness of the controls and the scrolling mechanism relative to Camera Raw 6.0". Happily I immediately decided to give the new prerelease a try...
But unfortunately I don't see a performance gain when scrolling in CR6.1pre. It is actually worse for me in 6.1 than it was in 6.0. It is now almost impossible to scroll out to the corners of a Raw file using the hand-tool. It fells like it get stuck. And I know never know if I have actually have reached a corner or it is just stuck somewhere on the way out to it. So now if I want to go to a corner, I find it much easier to zoom out by double clicking the hand, and then zoom into the corner by clicking the magnify tool in the corner.
But the new lens correction is great ! :-)
Win XP Pro x64 Edition.
/Stig

Stig N wrote:
If you double-click you open CR hosted by Photoshop, ie. 64 bit (Or at least that is the default, you might be able to change it in the settings). But if you right-click a raw file in Bridge and choose "Open in Camera Raw" it is hosted by Bridge.
Oh? Was not aware of this; and, come to think of it, I cannot see the reasoning behind not always opening in the faster/better mode.
Or am I missing something?

FCE export quality worse than iMovie with same settings

Hi, I'm having real problems exporting video from FCE. If I import an HD clip from my Panasonic sd200 into iMovie and export it as a .mov and do exactly the same in FCE using the same export settings, the quality of the exported movie from FCE is much worse than the same from iMovie. I have been struggling with this problem for months and cannot seem to get any sort of decent quality export from FCE (using H264) and spent hours trying different settings.
Also, the colours in the exported videos from iMovie and FCE are less saturated and look really bland next to the same clip in FCE canvas.
Please can anyone help? Even the guys in the Apple shop could not figure this one out.

Sorry the camera is actually a Panasonic HS200.
The native format is .MTS and films in 1920x1080 50i. Imported via iMovie as a .MOV which gives the same quality footage as if I imported via Log and Transfer.
I will expand on the problem I am experiencing. When I export from FCE4 using "QuickTime conversion" I use the following settings:
Codec: h.264 Key Frames: every 25
Frame rate: 25fps Frame Reordering: on
Data Rate Restricted to: 10mbps
Optimised for: Download
Quality: High Encoding: Best quality (multi-pass)
Dimensions: 1920x1080
Deinterlace Source Video: ticked
When the deinterlacing is ticked, the final exported video appears ghosted, with two of the same images projected side by side rather than one on top of the other, creating a very bad image. However when deinterlacing is not ticked the final exported video ends up with horizontal lines across the entire image. This is seen even more clearly when not in full screen.
When I export from iMovie 09, using Share>Export using QuickTime using the same settings as in FCE4 (deinterlacing ticked) the footage is very clear and there is no noticeable ghosting or horizontal lines.
When I export footage from FCE the video also end up desaturated and washed out, with low contrast. The same happens when I export from iMovie, but to an even greater extent!
My 'Easy Setup' for FCE4 is:
Format: Apple intermediate Codec Rate: 25fps
Use: AVCHD- Apple Intermediate Codec 1920x1080i50
These are the problems I experience; described above.
I do no know whether the problem is something to do with my export settings; settings in FCE; or whether FCE exaggerates the quality of my images (which i highly doubt); or if it is because FCE4 is now around 4 years old, and iMovie is from 2009, and therefore has more advanced settings for AVCHD?
I am by no means a professional when it comes to talking video jargon.
Any help is truly appreciated as i have completed over 150 test exports in FCE and the Final Cut experts at the Apple store spent almost 2 hours trying to work something about, but could not think of anything!
Thanks in advance.

Official Apple reseller says "iPhone 5s's camera is much worse than the other"

Hi Apple support and fans,
I am writing to ask you and maybe get Apple's attention to what happened to me. I bought an iPhone 5s 8 days ago. I bought it from official Apple reseller in Warsaw, the capital city of Poland. And then my adventures began.
First, the plug is British, not Polish, because as the reseller said "we have some iPhone not from official distribution, but it will work". Because I needed to buy an iPhone5s fast, I accepted that. However, the question is still there - is it legal to sell British iPhones "from unofficial distribution channel" in Poland?
Second, and more important, my iPhone 5s makes horrible blurred pictures. I mean they are really blurred... I read all the posts on this forum and I tried everything. Finally I decided to visit the reseller and here is what their representative said: "These pictures are totally fine. They are blurred, as this is not a professional camera". Wow! What a discovery. I know that this is not a professional camera, but I know how photos from an iPhone (4 and 4s) might look like. So I replied that something is strange and I wanted to give my iPhone back to check it (under warranty). The representative replied: "We will not take it, and I'm telling you the pictures are all fine. The camera in iPhone 5s is much worse than it was in iPhone 4s and hence the blurred photos. Just live with that".
And now my questions:
1. Is it true that the pictures must be blurred in iPhone 5s, just because it works so? I can't bvelieve it.
2. Isn't the fact that they sell iPhones from "unofficial channels" the reason why they don't want to take the iPhone under warranty?
If anyone from Apple wants to take a closer look at this issue and maybe discover some "strange" actions from Polish official Apple reseller, I'm open to provide you much more details on the purchase, the store location, etc.
Looking forward to hearing from you,
Kuba

iPhones are ONLY sold by Carriers and Apple an Apple reseller is unlikely to be authorised for iPhones and certainly would not sell an iphone with a foreign plug
You have clearly purchased a grey import a genuine Polish sourced iPhone sold by a legitimate iPhone reseller would have the correct plug for the Country
Big issue you have is warranty you need to take to an Apple authorised repairer
https://locate.apple.com/pl/pl/
luckily as long as iPhone came from UK you do have warranty ,EU is one "country" for Apple warranty purposes

Performance of Standard much worse than Premium?

After recently using up my 60 days of the premium trial, I decided I didn't need any of the additional features of premium and decided to purchase a license for standard instead. Everything went smoothly and once I'd upgraded to the latest AIRSDK, I was able to point to my previous workspace and all my projects built and ran fine, straight away.
Everything was good until I went to install one of the projects onto my Android phone (16GB Nexus 4). With the premium trial, I'd gotten accustomed to this only taking a few seconds for simple debugging, and a little longer for a release build. Since I've come to standard this is taking *much* longer, as in 2-4 minutes on average.
I'm still within my cancellation period for this, so I *can* take the decision to get premium instead, but the financial hit is... unwanted. If it is a case that the performance of standard is plain and simply just *worse* than premium, I may choose to go back to that, but I'd like to be 100% and get confirmation of that, before doing so.

From here:
http://www.adobe.com/products/flash-builder/faq.html
"Why use Flash Builder Premium Edition over Flash Builder Standard Edition?
Flash Builder 4.7 Premium adds professional testing tools, including profilers, network monitoring, an automated testing framework, integration with Flex unit testing, and command-line build support"
The only thing I could think of would be the command-line support. If Premium builds with the command line and Standard version doesn't that might explain the speed differences - but that seems very odd for them to do. If you deactivate your key I think it restarts your trial and if you restart Flash Builder it should load in Premium mode so you could try that and see if it builds faster. (You can always reactivate your standard key later with no issues since you just deactivated it before this)

Texting on a Pearl is worse than getting teeth pulled..

Similar Messages

Maybe you are looking for