Texting through messages does not work

I am unable to send any text messages from the iPad2.  

Check under settings->messages at top " learn more." You cannot send text messages to anyone who
does not have ios5 on their iphone. So if they don't have an iphone you cannot send them a message.

Similar Messages

  • After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out

    After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out.  There is no function at all.

    Ok I fixed the issue, turns out a couple of weeks ago, I downloaded a program that was suppose to help shrink some of your stuff to use less data, it was called Onavo.  It was suppose to show you how much data you use to help keep you within your limits.  If you have downloaded this, go through your settings and delete it and it will fix the problem.  At least it did for me.  I can now send photo's to non Iphone users via text no problem.

  • The two finger cycle through apps does not work?

    Hello,
    I don'nt know what is wrong, but it seems that the two finger gesture allowing to cycle through apps does not work for me. I  am using a standard mac Bluetooth mouse. 
    Can anyone help me with this?
    Thank you
    Sebastien  Dion
    from Quebec city, Canada

    Download a free app. It reauthorizes your device for use of your apple id.

  • Fetch new mail messages does not work

    On my notebook the fetch new mail messages does not work
    Settings:
    - Fetch new messages:     every minute
    - Play sound Purr
    I need to us the manual button.
    On my imac it works fine with the same accounts

    My mail sounds are all screwed up. I hear the plane fly when I send an email but when I receive mail, no sound. I have rules set up which worked in Tiger. One rule is for mail to play a message "You have a message from "John Doe" when I receive an email from "John Doe" but it only plays when I send "John Doe" and email. Assbackwards.
    Sometimes when reading new mail, it just disappears. I have to click on it again. I find this version of email to be very flaky!
    Dave Brenneman

  • Audio in video messages does not work

    When I record a video message for someone, the audio does not work properly. It either doesn't work at all (silence is recorded), or cuts out after a 1-2 seconds. The problem seems to be confined to the MP4 video/audio encoder used by Skype for video messages.
    My webcam (Logitech HD615) works properly when used for Skype calls (including the built in microphone), and when used in other applications. With other applications, I can also record videos and the audio is captured and encoded correctly. Although the problem does not seem to be the webcam, I have re-installled the webcam drivers and I have tried changing USB ports for the webcam.
    I have re-installed the latest version of Skype and verified that Windows has the latest updates (I'm using Windows 7).  I have tried re-booting a number of times when debugging this issue.
    I have looked at the mp4 file that's created in the temp folder when Skype records the message - the audio is missing/broken regardless of what player I use. This, and the fact that the webcam works makes me believe that the problem is in the Skype use of the audio/video encoder, or the encoder itself.
    Any ideas on how to solve this problem?
    Thanks,
    K.
    Solved!
    Go to Solution.

    When you change the USB ports, make sure not to use USB 3.0 ports. I had a very similar issue with Logitech c920 webcam. Changing the port to USB 2.0 has solved the issue.
    http://community.skype.com/t5/Windows-desktop-client/No-sound-on-video-messaging-playback/m-p/274382...

  • Encrypt Message does not work with new Plug-in 7.3

    I installed the new Email Security Plug-in 7.3 but now the Encrypt Message button does not work.  It is grayed out and unavailable when I attempt to create a new message. 
    I first tried installed 7.3 over the previous version but every time I opened Outlook I received an error message about XML not loading.  I uninstalled the plugin, rebooted and installed it clean and that took care of the XML message.  But I then found the encrypt button issue and have not been able to solve that issue.  This is not isolated to my machine as I have tried installing it on another machine that never had the plug-in installed before.                  

    My understanding is that they completely rewrote it, which is probably why an upgrade doesn't work well...
    I did get one way of deploying figured out, the stuff on page 3-20 has some errors. 
    Here's what I did that works:
         Do a clean install on a machine that doesn't have any plugin installed.
         Copy the C:\Users\All Users\Cisco\Cisco IronPort Email Security Plug-In\Common directory and its contents to a network accsible share, say \\fs1\share\pluginconfig, so you now have \\fs1\share\pluginconfig\Common, etc...
         Copy your BCE_Config_Signed.xml file to the Common folder
         Rename that to config_1.xml
         Edit the CommonEncryptionConfig.xml to have the following XML:
          Now you can push the install with a command line that references the folder (the example on page 3-20 is wrong, no 's' ):
                CiscoIronPortEmailSecurity-7-3-0-102.exe /exenoui /qn UseCustomConfig="\\fs\share\pluginconfig"
           (if you're doing it on the same machine you did the clean install with, you should uninstall it first...)
    Message was edited by: Ken Stieers

  • Loading flash through ajax does not work in IE 6.

    Hi all,
    I am having some problems on a site I'm developing. When I
    load a video from youtube, etc, and do so dynamically through ajax,
    it does not work on IE 6. Mind you it does work on all other
    browsers. This problem happens with multiple copies of IE 6 so it
    is reproducible. Not sure if there are any web devs here but any
    help would be greatly appreciated.

    Well, this probably belongs over in the Flash forum. That's
    where the developer questions go.. It's surely a matter of the way
    the code is written (or possibly the paths to the different
    components. There are security restrictions on certain types of
    loading that may also come into play. Hard to tell without more
    detail.

  • Smartview v11.1.1.3 drill through reports does not work in grids?

    Hi,
    I'm using v11.1.1.3 and know there is a drill through function to FDM from Smartview grids. I've tried but it does not work in the grids, only works in the forms. However, I'm able to drill through to FDM from workspace grids. Does anyone encounters the same?? Appreciate any kinds advices. Thanks!

    Are you certian that the report is showing an input level cell? Often reports are designed to run at Total dimension members, i.e. <Entity Curr Total> which you can not drill into.

  • HT1414 My vocal texting and Siri does not work...why?

    ANy thoughts on why my Siri on my iPhone 5 does not work?

    A reset will not cause any data loss.
    A restore from backup should not result in any data loss.
    A restore as new will put the device in a "fresh out of the box" state.
    If you are using the device as designed (i.e. syncing contacts and calendars to a supported app on the computer or a cloud service) then there is no risk.
    Pictures are designed to be moved to a computer regularly.  Any that the user desires to have on the device should be synced via iTunes.
    All media on the device should exist in iTunes on the computer.
    Frankly, it would be really unintelligent to rely on any device, especially one as easily lost/stolen as a phone as sole storage of content.

  • FaceTime and Messages does not work.

    Hi, I have a Macbook pro 13" (early 2011) I have the latest OS X Yosemite 10.10 update and have tried every troubleshooting step I can think of. I have made sure my date and time are set automatically and are correct. I have toggled FaceTime on and off. It's logged in just fine and gives the appearance that it works but everytime I try to FaceTime it instantly says FaceTime failed. I can FaceTime the same person from my phone with no problems. Also my Messages is having the same issues they will not send although I'm signed in to my apple ID and verified with the code from my phone as soon as I opened the app. Also my Apple ID is valid and verified so there's no issue there. I cannot figure out why it will not work and I've done every troubleshooting step that apple offers on the website. I even downloaded and reinstalled the latest OS. Any suggestions? Thanks, Phil

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Rule created to monitor a single line entries in a text.log file does not work

    Hi All,
    I have this strange issue. I created a script which generates .log file and i have configured a rule to monitor it. Whenever the .log is altered the alert does not come at all in SCOM 2012 R2.
    I want this alert to be raised when one specific line in the center is altered from LISTENING to NOT LISTENING.
    I have configured it. It triggered a alert for the first time and again it did not trigger at all.
    I created this rule and disabled it and overrided the value to true only to the MS acting as the watcher for this log file.
    The log file generates in the local drive of the MS itself.
    Changed the log watcher to a different server and also mentioned the application data source to a network location when the watcher was changed so it can pull the log accordingly.
    The log is generated in the MS itself. Tried using both local location where the log is located as well as converted the same to a network location still didn't help.
    C:\Port_checker is the directory where the .log file is located also there is no other log file present only 1.
    I also changed the parameters such as "Contains, Wildcard matches etc but nothing worked.
    Screenshots:
    2. 
    The SCOM Action account has Full permissions on all servers over the entire forest itself.
    Target used to create this rule is "Windows server operating system"
    Can any one help me please.
    Gautam.75801

    Since you have a script that updates a file line from "LISTENING" to "NOT LISTENING"
    you might want to try and configure a Two State Script Unit Monitor rather then a rule. So your script just need to check say every 5 minutes the content of the log file and generate an alert when it matches "Not Listening" and clear when
    it changes to "listening".
    http://www.systemcentercentral.com/wp-content/uploads/2009/04/HOW-TO_2-state_ScriptMonitor.pdf
    Cheers,
    Martin
    Blog:
    http://sustaslog.wordpress.com 
    LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Hi, I am trying to verify my Acrobat XI Pro and the serial number I was given through email does not work.

    The Acrobat manager does not accept letter formation while entering the serial number. Where my serial number does contain letters and numbers. How do I enter my verified code ?

    Was this a purchase from Adobe?

  • Dynamic action on text box change does not working

    i have a page with following components.
    a report that has and edit link.
    a text box to catch the primary key from report link when it is clicked
    a number of elements (text boxes, check boxes and LOVs) which are used as data entry form.
    Now my design is that user enter values save them and no sooner did they save, the report depicts new
    values. if user want to edit any record, they click on edit link and the data entry form elements
    should now bring all those values from DB on page. i m successful to pick primary key and bring
    it in a hidden text box and wrote a dynamic action on its change event that will bring values from
    DB and set all page elements. but but but.........the change event doesnt work. it only work
    when focus is lost from the text box...!! offcourse user wont want to click in that "hiddent" text
    box and then click some where else to bring values in page data entry form......
    help is humbly requested from forum or if any other solution approach is to be used easier than
    one i m using, would be appreciated.
    thanks in advance for reading my bore question :)

    bundles of thanks for reply. i m going to elaborate.
    1. My page no is 3.
    2. Hidden Item name is P3_EDIT_ACTIVITY_ID
    3. Data entry form, hidden item and the report are on the same page.
    4. on the edit link of report, i have used following settings.
        Target: Page in this application
         Page: 3
         and i set hidden item as follows......
         Item 1   P3_EDIT_ACTIVITY_ID         Value #ACTIVITY_ID#
       well, when i click the link on report it does bring Activity_Id in the hidden box (which is not yet hidden for debugging purpose)
    Next i wrote Dynamic action which fires on the change event of P3_EDIT_ACTIVITY_ID and run PL/SQL code with in it which is as follows
      declare
      Dept varchar(50);
    begin
       select my_dept into Dept from activity_main ACTIVITY_ID = :P3_EDIT_ACTIVITY_ID;
       :P3_Dept := :Dept;          (i did use :P3_Dept := Dept also but this wont work)
      insert into testdynamic (stamp) values (Dept);  (I did this to check whether correct value is brought from DB, yes it works correctly, correct Dept is being inserted in stamp column)
    end;
      i have created another true action to check when the dynamic action is fired. its very simple alert. and the problem is, it only fires when focus is lost from the P3_EDIT_ACTIVITY_ID. i mean, when u keep changing value inside the text box, nothing happens, when u go outside, the alert is fired and so the pl/sql procedure. but the line
        :P3_Dept := :Dept;       OR      :P3_Dept  := Dept;         arent working which is the actual requirement.
      I m not using set value here as i have to set a lot of values on page not one. further. plz let me get rid of this lost focus thing as i want the form to be populated with correct values related to P3_EDIT_ACTIVITY_ID as the user click on any edit_link in the report.
    Thanks for persistence. i hope i have provided all the details.
    looking forward.

  • I message does not working

    i have tried all the things they said andstill can not getit t wrk

    iMessage allows you to send unlimited text, photos, videos, locations, and contacts using Wi-Fi or 3G* from your iPhone, iPad, or iPod touch to other iOS 5 users. For more information on how to use iMessage, see theuser guide for your iOS device.
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755

  • Sound through HDMI does not work on eeebox eb1501p

    So, as the topic states I can't get sound to work through HDMI.
    aplay -l says:
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    When trying to play a wav file:
    aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    No errors, but no sound either, and this is true on all nvidia devices listed in aplay -l.
    So what do I do next?
    EDIT: The channels are all unmuted in alsamixer.
    Last edited by jarrett (2011-12-17 23:20:26)

    On my laptop, I have to add "options snd-hda-intel probe_mask=0xffff,0xff2" to a modprobe.d conf file. You can try that.
    sudo su
    echo "options snd-hda-intel probe_mask=0xffff,0xff2" >> /etc/modprobe.d/sound.conf
    exit
    After that, restart and hopefully it will work.
    Last edited by vbim0nk (2011-12-17 14:52:20)

Maybe you are looking for