The backup disk image "/Volumes/Edward Malloy's Time Capsul/Edward's MacBook Pro.sparsebundle" is already in use., The backup disk image "/Volumes/Edward Malloy's Time Capsul/Edward's MacBook Pro.sparsebundle" is already in use.
How do I delete the "open" backup?
thanks in advance
Please look over to the right of this page under the heading of More Like This for multiple answers and solutions.
Or, see #C12 in Time Machine - Troubleshooting
http://pondini.org/TM/Troubleshooting.html
Similar Messages
-
I noticed today that my last back-up was this a.m. and it has tried several times to back up since but I keep getting this message
Time Machine couldn’t complete the backup to “TimeCap”.
The backup disk image “/Volumes/Data/ MacBook Pro ."sparsebundle” is already in use.
I have never had this problem before and don't know what to do. I am not that great around computers so if anyone can help I would appreciate it. I did try to do some research but could not understand any of the content I read. I sure don't know what "sparsebundle" is and this is the first time I ever heard the term.
If anyone can help woold appreciate it.
I have Version 10.9.1This is a standard issue..
Been around since LION but you missed out.. !! Well the old rule applies.. there are three types of Mac users.
1. The bugs have bitten you, and you have done the work arounds.
2. The bugs are biting you and you are now trying to find out what is going on.
3. The bugs will bite you. And in the meantime you laugh at everyone with problems and say it must be all their fault. Doesn't happen to my system.
You were simply in the last group.. now, with the wonders of mavericks to help, you got bit.
The solution is simple.. unplug the power cord from the TC .. count to 10.. power up the TC again.
No luck look at the more technical help.
C12 here. http://pondini.org/TM/Troubleshooting.html
Your naming might also be an issue if this continues to happen.. see C9. -
MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image “/Volumes/Data/Jerry Booher’s MacBook Pro.sparsebundle” is already in use." error when Mac Pro tries to back up
It is standard Mountain Lion error due to the networking ability which is comparable to wet string. (actually that was lion.. it dried out some with Mountain Lion.. higher in the hills perhaps!!)
See C12 and C17
http://pondini.org/TM/Troubleshooting.html
But many people are suffering the same issue..
And the above is even a little out of date.. you might need to do a reset to the TC.
Welcome to Apple's beta program for everyone. -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
Time Machine did not back up:
Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
How do I correct this issue?
Thanks!You need to be careful Bob.. people might take this literally.
Bob Timmons wrote:
How do I correct this issue?
Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
https://discussions.apple.com/thread/5222487?tstart=0 -
I'm getting the following error message from my Time Machine for two days now:
"The backup disk image “/Volumes/Backup Files/Burke iMac.sparsebundle” is already in use."
I haven't changed anyting lately and can't find the problem...Try just rebooting the TC.. or restart of the whole network, in correct order.. modem.. router/TC.. clients.
Read C12 here.
http://pondini.org/TM/Troubleshooting.html
Look at the more like this on the right. it is a very common problem.. especially since ML we have this question 5 times every day. -
I have a MacBook Pro 13" 2010 model running Mountain Lion. I have always been able to use Time Machine with my Time Capsule. Just today I have been receiving the same error message whenever I would back up my computer:
I removed my name before "MacBook Pro". It takes a long time "Looking for backup disk..." first. The disk I put with the time capsule is called Huge Backup, and in Huge Backup there is my sparsebundle file called "----- MacBook Pro." When I open Finder, open my time capsule, and then open my sparse folder, it should mount a drive where I can see my computer's backups. That doesn't work. Then I get this message:
I once again removed my name before "MacBook Pro" but I can open my sister's sparsebundle who is running Mountain Lion on the same network and her backups work fine. I have researched this topic and have tried to repair the disk in Disk Utility, remount all the drives, remove the drive and restart the backups, and even restart my computer and the Time Capsule. Nothing worked. It just was working yesterday, but now I get this in the settings along with a caution symbol in my menubar:
Is there anything I could do to fix this? Reconnecting it in AirPort Utility (5 or 6) didn't work. Also, for some reason, the error renamed Huge Backup to Huge Backup-1 as you can see above and below in the messages. I downloaded the Time Machine Buddy widget and this is the error report I got. I replaced my names or private info with [-----]. By the way, the network is called NDR Network, and the Time Capsule is alled NDR Time Capsule. Here's the error I keep getting:
Starting manual backup
Attempting to mount network destination URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
Mounted network destination at mount point: /Volumes/Huge Backup using URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
Disk image already attached: /Volumes/Huge Backup/[-----]'s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a483e6c0 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
Mounted network destination at mount point: /Volumes/Huge Backup using URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
Disk image already attached: /Volumes/Huge Backup/Rohan's MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a343d430 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
Mounted network destination at mount point: /Volumes/Huge Backup-1 using URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
Disk image already attached: /Volumes/Huge Backup-1/Rohan's MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a34410c0 {MessageParameters=(
Ejected Time Machine network volume.
Giving up after 3 retries.
Backup failed with error: 31
[SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
Failed to eject volume (null) (FSVolumeRefNum: 0; status: -35; dissenting pid: -1)
Failed to eject Time Machine disk image: /Volumes/Huge Backup-1/Rohan's MacBook Pro.sparsebundle
Please help!I didn't remove all of my names, so just ignore that...
-
My Time machine won't back up. Recently updated to OS x 10.7.5. Error message is as follows: "The backup disk image “/Volumes/Time Machine Backup/Scott’s MacBook Pro.sparsebundle” is already in use." What is wrong and how do I fix it? Thanks.
Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.
-
The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.
Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474 -
My Time Machine is not backing up and gives me this error report:
The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
Time Machine could not complete backup
Can anyone help me?Look at the discussion on the following forum:
https://discussions.apple.com/thread/3882138?start=0&tstart=0
The responses given there may help. -
This is the second time I've encountered this issue with Time Capsule using Time Machine automatic backup. I haven't found the following specific error message in the list of troubleshooting issues: "Time Capsule cannot complete the backup. The backup disk image “/Volumes/Data/MacBook Pro.sparsebundle” is already in use."
I'm not certain what causes this issue. I think it may have something to do with having to force shutdown with apps still open when the beachball hangs and the MacBook has to be rebooted.
Has anyone else dealt with this issue?Welcome to Apple Support Communities
Restart your Mac and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html -
I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.
Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again. -
"The backup disk image “/Volumes/Data/Neil-MacBook Pro (171).sparsebundle” is already in use"
OS X 10.8.1 (12B19)
" error message just started
Mountain Lion
OS X 10.8.1 (12B19)
MacBookPro 2.53 Corei5
All software update installed
Time Capsule : 1TB, 599 of 998GB used
What causes it?
How do you fix it?
How do you stop it happening again?
Any ideas pleaseThanks for fast response.
I already tried C12, no luck. I did read C17, but that did not help either.
I agree that Apple should really spend a bit more time on ensuring this common problem is resolved more quickly
But where to do you sent this request to? Doesn't seem easy to find a person to send it to.
I dumped by corporate wIn-pc environment that I was forced to use for the past ...forever. Have been delighted with the Mac experience..... for 24 months..but these type of un-resolved matters with terse error messages reminds me of the bad old days.
I had the problem 2 weeks ago and solved it by "clicking about" after reading the forum Can't remember what i did though. V. V. V. frustrating when the Mac is a business tool. I don't want to be a mechanic, I want to be a driver.
Thanks again for your help -
i am running 10.7.5 on an older MacBook and getting Time Machine error The backup disk image “/Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use. what do i do now?
See Pondini's TM FAQs, for starters.
-
"The backup disk image 'Volumes...sparsebundle' is already in use" error message
Since upgrading to Lion, I seem to be able to back up my MacBook over Wi-fi to an external hard drive attached to my Airport Extreme just fine. However, if Time Machine is in the middle of a backup and I interrupt it by closing my MacBook hence putting it to sleep, next time my MacBook attempts a backup I get the message "This backup disk image "/Volumes....Macbook.sparsebundle" is already in use. I've tried disconnecting all users from the hard drive in the Airport Utility, and then unplugging the hard drive and plugging it back in, and then it seems to backup fine, until I interrupt another backup, then the problem starts all over again.
I never had this problem before upgrading to Lion. Suggestions?NateCook, I'm experiencing the exact same issue. I'd previously been enjoying how seamless Time Machine worked, wirelessly and automatically, to backup my MacBook Pro to a 2 TB drive attached to my Airport Extreme. I also liked that I had the flexibility to plug that drive directly to my Mac, via FW800 or USB 2.0, if I needed to. It would always work too, regardless of whether or not I interrupted a backup in progress. Now, with Lion, I'm constantly getting the same "This backup disk image "/Volumes....Macintosh.sparsebundle is already in use" error. I fix it by restarting the Airport Extreme but that's a pain in the butt to have to do all the time.
Can you verify whether or not the recent OS X 1.0.7.1 update helps fix this in any way? Or is the situation the same for you?
I'm loathe to "give in" and buy a Time Capsule to replace this setup, but I will if I have to... I want everything to work like it did before and I'm not willing to downgrade fom Lion back to Snow Leopard over this. I was hoping Apple would fix it properly, but since this isn't a "supported configuration" (even though we know full well it works just fine) I was afraid Apple wouldn't focus on this as a priority.
I'm also a bit fearful that the same issue will occur with a Time Capsule.. hmm... my hunch is I'll be finding out soon enough.
Maybe you are looking for
-
How can i heal a "transparent" area in an LR-created pano?
When I shoot handheld pano's, there are usually "missing" areas in the sky or ground because of my handheld sloppiness. In theory, these can often be fixed with the healing or cloning brush if the sky or ground is reasonably consistent. Using PTGui
-
Where in migration process does old server stop functioning as primary server?
I am migrating from a SBS 2003 box to a new WS 2012 R2 Essentials box - following the instructions from "Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience". What I need to know is where in
-
How much volume can this server handle?
Post Author: mronquillo CA Forum: General Feedback I'm not really sure where to post this. If I posted in the wrong section, please forgive me.I am running Business Objects Enterprise XI R2 on a rack-mounted server with the following specs:Quad Core
-
Lost system administrator password
I've lost the password for account "System Administrator". How can I reset the "S A" account password? Googling finds ways to reset root or non-admin passwords, but no mention of the account called System Administrator. I have root / root password.
-
How do I on IPHONE 6 have audio message option not just have the option it seems for other people with Iphones. Even Nokia phones have this very BASIC function/? Also how can you BULK DELETE Emails, I get hundreds of junk ones per day, and simply wan