The built-in iSight on my iMac no longer works on Skype an camera booth. Is that a software or hardware problem. the video screen shows no picture but just horizontal line. Any suggestions?

Hello,
The built-in iSight camera stopped working for Skype and Camera booth giving each screen the same horizontal lines. Is this a software or hardware problem. What insight and advicecan you give me. I would be greatful. Thanks
Georges

Is the little green light on?
Open Console in Utilities & see if there are any clues or repeating messages when trying one of those Apps.

Similar Messages

The home button on my iPad is no longer working. To get to a new app I have to turn off the iPad and restart it.

The home button on my iPad is no longer working. To get to a new screen or App I have to turn the iPad off and then restart it.

Try calibrating the home button and see if that works. If it doesn't, you could also try restoring with iTunes. Try this first.
Calibrate the home button
1. Open a stock iOS app, such as Contacts
2. Press & hold the sleep/wake button at the top of your device until the red slider control appears.
3. Immediately release the sleep/wake button and press & hold the home button. Hold until the red slider disappears.

I can access my music library, but not the Itunes store. Just getting a white screen. It starts to connect but just stops. Any suggestions?

I can access my music library, but Itunes Store is not opening. I am just getting a white screen. Any suggestions?

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that didn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter the Wi-Fi password.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
No data is lost due to a reset.

I am new at this. Cannot send out pdf's from my computer. They receive message that says "cannot open this file" or corrupted file. I can receive just fine. Any suggestions?

Everytime I try to send out a pdf file, on the receiving end it shows they cannot open it or it shows corrupted. I send to large companies so I know it is not on their end. I can receive them fine. Don't know if this could be an adobe issue or a Norton's issue. Any ideas I can check out?

lrfrustrated wrote:
I just downloaded Adobe XI onto my macbook air and now I cannot save or print any PDF files. Will not let me do Print-Save as PDF, and if i do Save as i get a message saying that the file is corrupted. I had NO PROBLEMS at all doing this many times until i downloaded the new version. I have uninstalled and reinstalled, to no avail. I am super frustrated.
Print>Save as PDF - uses Preview (part of OS X), so Adobe Reader should have no effect on that at all.
As to the "damaged file" error, simply uninstalling the Reader app won't affect it. Do the following:
Mac HD/Library/Internet Plug-ins
Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin files
Mac HD/Applications
Trash the Adobe Reader app
[user]/Library/Preferences
Trash the com.adobe.Reader.plist file
To access the [user]/Library, hold the "Option" key and click "Go" from the FInder menu.
Mac HD/Library/Application Support/Adobe
Trash the Reader folder (the whole folder)
Empty the Trash.
Download the FULL installer here: http://get.adobe.com/reader/enterprise/
Quit your browser and reinstall Reader.
Launch it from the Applications folder and accept the license agreement.
You should have no problems downloading PDFs with Safari.
Unfortunately, ANY PDF that says it's damaged.... is. You'll have to trash them.

Can I use the color splash app on my imac instead of my iphone? How do you do that?

can I use the color splash app on my imac instead of my iphone? How do you do that?

Software written for the iPhone and other iOS devices can't be run on a Mac.
(61491)

My Contracted SIM is for an android phone, but when i put the sim in an iphone my 3g no longer works?..

My Contracted SIM is for an android phone, but when i put the sim in an iphone my 3g no longer works?.. Is it because my 3g is only active on the android os and not the ios platform? Texts, Calls and Wifi work fine but the 3g doesn't work. My phone only shows 'GPRS' in the top left corner. Also I get a message come up saying "Could not activate mobile data network. You are not subscribed to a mobile data service".
Any advice would be great.

Hi hexonxonx, I'm on o2. Thanks for your advice. You are right. All I had to do was change one of my APN settings to mobile.o2.co.uk and reboot my phone and this sorted it out straight away! Thanks again. Much appreciated . I was thinking I was going to have to go back to an android phone to use my 3g again but this eliminated that need. Thanks.

Can you adjust the tint on the built-in isight camera on an iMac?

Can you adjust the tint on the built-in isight camera on an iMac? It is curently too red on my iMac.

The iSight has no mechanical parts. The iSight will adjust to the light by changing the sensitivity of the sensor's receptors. It is possible to manipulate the picture with software routines and simulate slow shutter speed. For photography look [here|http://www.boinx.com/fotomagico/overview>.
Message was edited by: CodLBi

Once upon a time, I shun down the camera(built-in isight) on my Imac, now I don't know how to restart the camera.

I can see the built-in iSight at the device manager, and its property is "normal". But how can I get it work again?

From apple help:
Using your Mac’s built-in camera
If your Mac computer or display has a built-in iSight, FaceTime, or FaceTime HD camera, you can use it to take pictures or videos with the Photo Booth application, create movies with iMovie, or video chat with your friends and family over the Internet.
The microphone (see A above) transmits and records sound. The location of the microphone may vary depending upon your computer model. The camera (see B above) takes pictures in Photo Booth or captures video in iChat or iMovie. The indicator light (see C above) glows when the camera is on.
To turn off the camera, close the active application window. The green indicator light turns off, showing that the camera is off and video has stopped.
So open the application you want to use the camera with. The program will control the camera. TRY: Open PhotoBooth. Click the red button. Watch for the green light next to the lens (C above)

Can the built in isight camera be used on msn mesenger

can the built in isight camera be used on msn mesenger if yes then how?????

iChat/AIM is seldom used here in Europe. It's all MSN here i'm afraid. Is there software that we can use to videochat with MSN-users? What other videoconferencing software works with the build-in iSight?
Kind regards,
Dimitri
iMac G5 (iSight) 20" Mac OS X (10.4.2) 1,5 Gb RAM

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

I have a the Spring 2011 iMac and I am looking to connect both my Bose Companion 2's with my new Companion 20's together to have one single audio system, any suggestions on how this can be done?

I have a the Spring 2011 iMac and I am looking to connect both my Bose Companion 2's with my new Companion 20's together to have one single audio system, any suggestions on how this can be done?

FIxed my problem!
After years the problem was solved somply!
Go to System preferences
Go to Ethernet
Go to Advance
Go to Hardware
The just make the changes like in the pictures below

Photo Booth and iChat etc. aren't reading the built in iSight

I've got the new Macbook, but for some reason whenever I go to iChat or Photo Booth or anything else that requires the built in iSight it gives me the message: There is no connected camera. So the LED light won't go on and I can't figure out how to turn the camera on. I recently got Flutter and it turns the camera on, but for some reason even when the camera is on for Flutter iChat and Photo Booth still don't read the camera as on. I'm very confused and I'm hoping you might be able to tell me how to get it working.

Try this
http://docs.info.apple.com/article.html?artnum=93240
and try a reboot.
Best of luck.

Using the built-in iSight for flash video applications

The main question I have is how do I get my camera to turn on with my browser to use a Flash movie application? I know you can use it for the like: iChat, Photo Booth, iMovie. But I have no idea how to get it to work with the internet. Any suggestion would help me in any direction.
Thank you
MacBook Pro Mac OS X (10.4.10)

I like the idea to put a camera in the computer.
I have not seriously used a macintosh since 1992, when I was in 2nd grade. Ever since I tinkered on my dad's mac now and then when he was not looking. But, I need to know where in the settings do I go to enable the built-in iSight camera to work on the web or any flash application
MacBook Pro Mac OS X (10.4.10)
MacBook Pro Mac OS X (10.4.10)
MacBook Pro Mac OS X (10.4.10)
MacBook Pro Mac OS X (10.4.10)

Video recording using the built in iSight camera on a MacBook Pro

Hello,
Where do I find directions to record video using the built in iSight camera on a MacBook Pro?
Thank you,
Deb

Hi macosxlover,
Those are the instructions.
Open iMovie
Move the slider to the camera (use it as a drop down if more than one cam is available)
Press the record button to add the video feed as a clip.
Edit as required.
12:00 AM Monday; June 12, 2006

Disable the built-in ISight Skype?

Hi
I downloaded today the latest version of Skype 5.0.0.7980 (mac)
and in the preference there isn't any option to enable/disable camera...
could you tell me how can I disable the built-in ISight Skype camera please?
thank you

This is really a Skype Question but do have skype go to preferences in skype and under video, uncheck enable skype video.

The built-in iSight on my iMac no longer works on Skype an camera booth. Is that a software or hardware problem. the video screen shows no picture but just horizontal line. Any suggestions?

Similar Messages

Maybe you are looking for