The data has been updated-loaded upto PSA only

Hi,
The data has been updated-loaded upto PSA only even though the processing type
has update into PSA and then into data targets. Please let us know what can be problem and what will be the solution for this.
Regards,
Raghav

Hi Kolli,
Do you have the further update from PSA process in your process chain? You will need this if the InfoPackage has the 3rd option on the Processing tab (PSA and then to data targets).
Hope this helps...

Similar Messages

HT4623 I've updated my Ipad to IOS 7,0, the problem I'm is the Ipad has been updating Icloud settings for the past two days and it's not allowing me to do anything else. How do I cancel the Icloud update?......HELP

I've updated my Ipad to IOS 7,0, the problem I'm is the Ipad has been updating Icloud settings for the past two days and it's not allowing me to do anything else. How do I cancel the Icloud update?......HELP

Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download

"SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run." What is this all about?? Shall I give up on Firefox?

When I tried to use Firefox this morning I got this message with exclamation marks.
"SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run."
What is this all about?? Shall I give up on Firefox?

Sorry to hear that. I understand your frustration and I hope they send back a better working N78-3.
Myself, I count myself lucky. Everything works perfectly for me right now...email, bluetooth, maps, gps, 3rd party apps, battery life, 3G, wifi, etc. etc.
The only issue I've been having is the dreaded reboots but I believe that may have to do with 3rd party apps. I recently uninstalled Google Search app from my N78 and since then it hasn't rebooted or shown any issues. This seems odd at first but makes sense if you think about the fact that the Google Search app loads itself into memory and runs in the background at all times.
I did this this past Tuesday night and so far no reboots, crashes or any problems. I'm sure I just jinxed myself but I've been using it heavily over the last few days with no issues. Prior to this, it would usually reboot every 2 days. If it doesn't reboot for another few days I'll be happy.
I would normally not stand for this but I just love the phone and if I got something else it'd probably be the iPhone 3G which has perhaps more software bugs and issues than the N78-3!!
Best of luck. Here's hoping they release an update soon.

Since the cloud has been updated, I can not see my files on safari. Why?

Why can I not use safari to open my creative cloud page? I used that browser for months and since the cloud has been updated, I can only use google chrome.

Found it in link from https://discussions.apple.com/message/20431895#20431895, Or press ctrl + S to get the left sidebar showing!!!

Is there any way to know that the UI has been updated due to a bind change?

Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
      c.fill=Color.RED;
printNodeAsImage(filename) //to a file
}

Oops..Got posted before I could finish the query
Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
      c.fill=Color.RED;
      printNodeAsImage(c, filename) //to a file
}Let us assume that printNodeAsImage(c,filename) saves the circle node with the current color to a file. See http://rakeshmenonp.wordpress.com/2010/04/26/javafx-1-3-save-as-image/ for a implementation of this function
What we notice instead is that printNodeAsImage(c, filename) actually saves the node with the color YELLOW instead of RED. Is there any way to know deterministically when the UI has been updated due to a variable value change (or because of binding). (In this case the transition from Yellow to Red) So that we can perform other operations on the UI state - like saving it to a file
Regards,
Dhruva Ray

Creating a Materialized View Log After the Data has been instered

Hi,
I am trying to create a method of replication from Oracle to MySQL using the Materialized View Log table.
This has been done before and works quite well, the only problem is that I am trying to impliment the log after the table has been created and populated and wish to push all the existing data through the log file...
Does anyone know if it is possible to refresh the Materialized View Log and not a Materialized View.
The way the replication is intended to work is:
Oracle> Data inserted into table
Oracle> writes the vector data to the MVL
Script> Monitors the MVL and can see the changes being made to the Oracle Table
Script> Updates MySQL with the data and removes the rows from the MVL
MySQL is then used with other unix systems
Currently we export the data from the table using Triggers and a cronjob running every x minute to check for changes in the TriggerTables
Many thanks for your time on this, I have been checking for almost a whole working day and not found the answer to this problem.

Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
Many thanks for your help.

The phone has been updated. Now insists on 'restore'. This will lose all the contacts. Help!

The phone has been abroad for 4 months using a local sim card. Now home, it has been 'updated' from itunes and now insists on 'Restore'. This will delete all contacts. Backup unavailable, the screen shows only the sign to plug in to itunes. Have tried turning off and on. Same.

Although contacts are included with your iPhone's backup along with a significant amount of other data which is updated by iTunes as the first step during the iTunes sync process, contacts are designed to be synced with a supported address book application on your computer. Not a good idea to depend on your iPhone and your iPhone's backup or on any cell phone along for your contacts, which can be lost or stolen, or suffer hardware damage from being dropped in water or liquid, etc.
How do your know your iPhone's backup is unavailable?

Request batch process until all data has been updated to BW

Hai Experts,
This is the check box available in the info package scheduing screen
in the schedule tab.
Why this check box is used.Can any body explain the need of this one.
Thanks in Advance.
Regards.
Vikram Singh

Hi
If you schedule an InfoPackage later in the batch, you can specify that the background job for the request runs as long. That means it is active until all data is posted in BW.
For example, this gives external scheduling tools the option of monitoring the request job. The job then runs with a request from an SAP source system as long as the source system has sent the data to the BW system and has posted this or until the monitor sets the request to red. In the job log, a success or error message is displayed, depending on whether the request was successful or had error
Mannev
Assigning points is the way to say thanks in SDN.

I have an iPod that when I try to update the Apps that are shown to need update-ding and when I indicated to have them updated I get a message "can not connect to App store". The ipod has been updateing until recently. I came still down load new App and

I submitted my question but ran out of room in the box. I can still down load new Apps to my iPod touch AND update them but CAN NOT update the older Apps. that was on the iPod before the problem.
I have been to Three Apple Service Center stores - In Tulsa OK, Oklahoma City OK, Tacoma WA and NO ONE could tell me what is the problem OR what to do to correct it. The Tech then tells me to get hold of the main Apple Service Center number. I tell them I already have and they still recommend going to them.
I have erased all information and started over as a new iPod Touch but the problem persists.
I have called the Apple Service number and they tell me to do everything that the the Tech's at the Apple Service center stores tried to do but DID NOT work.
After I spend a lot of time on the phone, I get told to make an appointment at a Apple Service center store so they can physically have hands on assistance. Come on folks I have already done that and they were of no help. When I say that, I get told that may be the only way I can get the problem resolved.
Surely there is someone out there that knows something about what is happening OR not happening with my iPod and provide a solution.
Thank You for your concideration

I submitted my question but ran out of room in the box. I can still down load new Apps to my iPod touch AND update them but CAN NOT update the older Apps. that was on the iPod before the problem.
I have been to Three Apple Service Center stores - In Tulsa OK, Oklahoma City OK, Tacoma WA and NO ONE could tell me what is the problem OR what to do to correct it. The Tech then tells me to get hold of the main Apple Service Center number. I tell them I already have and they still recommend going to them.
I have erased all information and started over as a new iPod Touch but the problem persists.
I have called the Apple Service number and they tell me to do everything that the the Tech's at the Apple Service center stores tried to do but DID NOT work.
After I spend a lot of time on the phone, I get told to make an appointment at a Apple Service center store so they can physically have hands on assistance. Come on folks I have already done that and they were of no help. When I say that, I get told that may be the only way I can get the problem resolved.
Surely there is someone out there that knows something about what is happening OR not happening with my iPod and provide a solution.
Thank You for your concideration

I am trying to set up a hp desk jet 3520 wireless printer. I have recently upgraded to os x 10.9. My apple software for the printer has been updated to version 2.16.1 but according to os x: Printer scanner software the hp desk jet 3520 should be 4.2.4

I am having trouble setting up the wireless connection on a hp deskjet 3520. I upgraded to os x.10.9 recently. I have updated to the most recent HP software update which is version 2.16.1. However, according to the os x: printer and scanner software listed at http://support.apple.com/kb/HT3669 it should be version 4.2.4. How do I get the correct version so I can get the printer set up for wireless??

I am having trouble setting up the wireless connection on a hp deskjet 3520. I upgraded to os x.10.9 recently. I have updated to the most recent HP software update which is version 2.16.1. However, according to the os x: printer and scanner software listed at http://support.apple.com/kb/HT3669 it should be version 4.2.4. How do I get the correct version so I can get the printer set up for wireless??

Help! When I turned it on this morning all the data has been deleted fro m my mac book pro- its as it was when I bought it!

Help! When I turned on my Mac Book Pro this morning, everything had disappeared, even settings on trackpad, desktop photo etc were back to when I bought it 2 months ago.

I'm a big believer in backups - I keep two drives with Time Machine backups and 4 (actually 5, if you count the one in my banks vault now) clones of my internal drive.
You can never have too many backup schemes!
Clinton

HT4623 The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back to the main iPad screen. Any suggestions on how to fix this - all software has been updated to iOS 5.1.1 and no other updates are

The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.

This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Check if a certain file has been updated in last X days and error if is hasn't

I need to test if a file has been updated within the last few days (it's updated monthly) and proceed if so, but error if it hasn't been updated.
I used the following to check if the file has been updated:
Get-Item c:\temp\junk.txt | Where{$_.LastWriteTime -gt (Get-Date).AddDays(-7)}
It returns the file:
But I couldn't get that to work in a If/Else statement, so I tried Test-Path:
$path = "c:\temp\junk.txt"
If(Test-Path -path $path | Where{$_.LastWriteTime -gt (Get-Date).AddDays(-7)})
"File exists"
Else
{“No file” }
Although this always returns "No File".
Any idea what I'm doing wrong??
-Al H

Hi,
Here's how I'd do something like that:
If ((Get-Item c:\temp\junk.txt).LastWriteTime -gt (Get-Date).AddDays(-7)) {
Write-Output 'Less than 7'
Else {
Write-Output 'Too old'
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Recording stopped mas duration for the file has been reached

Has anyone else seen this message, "Recording stopped because the maximum duration for the file has been reached" this is happening on 10.6.2 server and client all updates applied. The File from podcast capture is not saved, it just disappears We are using a Hitachi camera. Any ideas?

This problem has been reported before, here: http://discussions.apple.com/thread.jspa?threadID=1704655 . For some reason, that thread was marked as "answered", even though it doesn't seem to have actually been answered.
I've just experienced the problem myself. I'm using OS X 10.6.3 with QuickTime Player 10.0 (113), capturing audio and video over FireWire from a PAL VHS deck via a Canopus ADVC-55. I'm using the "High" setting to record in QuickTime Player.
Sometimes I'm able to capture indefinitely long amounts of video; sometimes, though, I get a "Recording stopped because the maximum duration for the file has been reached" error after capturing only a few seconds. This variability occurs not only between VHS tapes; it also can occur when using the same source VHS tape (the same parts of the tape, even!) repeatedly.
Apple, this appears to be a QuickTime bug. Please investigate and fix it!

Topic has been updated since your last login

Is this message some kind of new improvement, or didn�t I simply notice that before? I think they should fix the current bugs before adding new features here.

Why can't you use a base-table block? You are sure trying to do things the hard way!
But if you insist... To make the comparison, you FIRST need to save the database value of each column in your block as you populate the block -- so you need a displayed/updateable value PLUS a hidden value of the same field. Then, to emulate Forms automatic processing, when you select and lock the row (after the user has made a change to one of the fields) you need to fetch all the values from the database again, and compare these against the hidden saved values. If any one compares not equal (and you must check for both null, also), then the row has been updated by another user.
Good luck.

The data has been updated-loaded upto PSA only

Similar Messages

Maybe you are looking for