The default value of purchasing group in "carry out Sourcing "
Dear , expert :
I work in SRM7.0 ,ECS!
I have two questions about the screen of "carry out Sourcing ":
1,How can set the default value of purchasing group ?Now the default is empty .
2.The purchaser can select many purchaser group here ,I want to know what controls this .in the group responsibility ?
Thanks!
Hi Alex
If there are more purchase group responsible for one product category. the end user (requestor) can select which purchase group before he order a cart.
so that sc goes to respective purchaser cockpit in the sc ?
if you have only one purchase group responsible . no probem
or
redistribute workload
you can distribute your cart to another purchaser
for eg. initailly ALEX is purchase group in the sc.
now you can transfer MASA purchase group via redistribution workload
so now the sc shows in the MASA cockpit with new purchase group as MASA instead of ALEX purchase group name
br
muthu
Similar Messages
-
Defaulting value of Purchasing Group based on Company Code
Hi All,
Currently we have two company codes C1 and C2 each have one - one purchasing org(PO1 and PO2) and purchasing group(PG1 and PG2). So Now hierarchy is as below: -
C1
PO1
PG1
C2
PO2
PG2
Now user of company code C1 can shop for C2 and vice versa but whenever he shops for C1 his Porg and Pgroup should be PO1 and PG1 only and same in the case for C2. Currently on shopping cart screen both company code C1 and C2 are appearing and like wise values of PO1 : PG1 and PO2 : PG2 is appearing in drop down list.
Now client is asking that whenever he selects C1 as company code PO1 : PG1 should appear as default entry and for C2, PO2 : PG2.
Can anyone tell me how this can be achieved and which BADI we are suppose to use to implement this solution?
Thanks
SiddarthSiddarth,
You shouldn't require a badi, look into the users attributes and extended attributes to see if that is where the extra information is stored. -
ME22N: Default value of address group field when searching for an address
Hi,
ME22N --> in the «Item» section --> «Delivery address» tab --> «Address» field --> «Adress group» field
Which transaction in SPRO allows me to set the default value for «Adress group» ?
Thanks a lot for your help.
JulienThe MM Super user realized during a traning with a new employee that this user did not had the default address group ME01 while trying to enter a delivery address in the Purchase Order. So when this user searches for a delivery address, he has to to through ALL the delivery addresses, and not only the adresses included in address group ME01. (This can lead to delivery problems if the user doe snot enter the right address)
We have SAP R/3 Enterprise 4.7, with SP: SAPKB62065 (Basis), SAPKA62065 (Cross-application), SAPKH47031 (Logistics and accounting), SAPKE47087 (HR).
Thanks a lot for your help.
Julien -
Default Values in Purchase Requisition
Hi MM Experts,
I want to set default values for Purchasing Organisation and delivery address for a particular user in transaction ME51N(Purchase requisition creation).
Can someone please advise me on how to do it?
I tried using the "Default Values" button, but the fields Purch Org and Delivery address are not there.
Thanks in advance.
cheers,
RandiHi Randi,
In ME51N, once the source of supply is assigned, the purchasing org will default to the porg defined for the vendor that is
assigned. For MRP, Purchase Organization will only be taken from the Source List. The POrg. cannot be dopted automatically due to the reasons mentioned in the Note 73241.
73241 ME51: User parameter EKO is not generated
Regards,
Purnima -
Can you set default values for person/group picker fields? To current user?
Two-part question/issue . . .
Part 1:
In InfoPath 2013 in use with SharePoint 2013, how do you set a Default Value for Person/Group Picker fields? Other field types like Text Boxes have a Default Value section in the Data tab of Properties. There doesn't appear to be any equivalent for
the Person/Group Picker field type in Properties. I'd like to set a default person for a few fields in a form I've created. Is this possible?
Part 2:
The default user I want to set for one of those Person/Group fields is the "current user." I want a user to log into our SharePoint 2013 intranet, load a new form for edit/creation, and have one of the Person/Group fields in that form to
automatically populate this particular user. Is this possible?Hi Stephen,
You can auto populate your InfoPath farm with current user Name and all other property that you have in your User profile, you have couple of options.
First you can make a secondary connection in your InfoPath form with user profile and can use the UserProfileService.asmx and call the GetUserProfileByName method. Here is the steps you can follow.
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx
Secondly you can use JQuery and SPServices ,
$().SPServices.SPGetCurrentUser function to populate the values with script to achieve the same in this case you no need to use InfoPath form just create simple text type column in SharePoint
list and auto populate it with getting the current user Name from User Profile here is the scripts
<script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery-1.4.2.min.js"></script>
<script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery.SPServices-0.5.4.min.js"></script>
<script language="javascript" type="text/javascript">
$(document).ready(function() {
var userCurrentName = $().SPServices.SPGetCurrentUser({
fieldName: "CurrentUser"
$("input[Title='CurrentUser']").val(userCurrentName);
var userPhone = $().SPServices.SPGetCurrentUser({
fieldName: "WorkPhone"
$("input[Title='Phone']").val(userPhone);
</script>
Krishana Kumar http://www.mosstechnet-kk.com -
Cannot set the default value of an item in the detailed table
Hi,
I have Master-Detail group, both are Table formats.
I need to set the default value of an item in the details row to the value of an item in the selected row in the Master table.
I tried Default Display Value=#{row.MasterItem}, but it seems it is trying to access current details row instead of the Master.
I tried #{bindings.MasterGroupColumnName.inputValue}, but it does not work.
Any ideas
Thanks in advance
MohamedI think I now what I'm doing differently, I had the "New Rows" JHS property of the detailed table group "empty" instead of the default "2" value.
It seems that "Default Display Value" expression works only for the new records specified in the "New Rows" property. But when I try to "Add" new record using the "Add Row" button, the new record inserted does not have the default values generated, only has values populated for the items of the FK (in the view link) but not the ones set through the property.
I guess in a nutshell, how I can get the details item to behave like the FK columns?
Thanks much
Mohamed -
Set Default Values on Purchasing Scheduling Agreements
Good day All.
I need to ensure that the Confirmation Control Key(EKPO-BSTAE) , Unlimited Over delivery indicator (EKPO-UEBTK), Creation Profile (EKPO-ABUEB) and Jit indicator (EKPO-FABKZ) is automatically updated with default values when a scheduling agreement is created for a specific purchasing organisation. Please advise if this is possible via config (SPRO).
Many thanks, Yumna
Edited by: Yumna Abrahams on Aug 10, 2011 2:58 PMHi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel. -
Default buyer in purchase group
Hi all,
i need to set default buyer in purchasing group. Totally there are three buyers in purchasing group. i need to assign the third buyer as default buyer ( when ever user raises the shopping cart, the third buyer should be fetched to the shopping cart)......please note all the buyers are responsible for all the product categories.Hi,
Refer the bellow link which help in getting some idea on your post.
http://www.sap-img.com/materials/purchasing-tips.htm
Regards,
Goutam Kolluru. -
How to config the Default Values in IT 2006
Dear Gurus,
My Client requirement is if i create Absence quota they want default quotas values
eg PL= 40
CL=7
SL=5
Then how to config the Default Values in IT 2006
Other wise where i have to assign in Quotas limit
Please advised
Regards
MHPOConfigure ur Absence Quotas with Selection group and assign the value of that selection group in Quomo
and run RPTQTA00
Time Data Personnel Time Management IMG Managing Time Accounts Using Attendance/AbsenceRecording and Administration Define Absence Quota Types. Time Quota Types Quotas
PersonnelIMG Managing Time Time Data Recording and Administration Time Management Calculating Absence Entitlements Accounts Using Attendance/Absence Quotas Permit Quota Generation Without TimeAutomatic Accrual of Absence Quotas Evaluation.
Time Time Evaluation Personnel Time Management IMG Set Personnel Subarea Groupings for Time Recording.Evaluation Settings
PersIMG Time Data Recording and Administration onnel Time Management Calculating AbsenceManaging Time Accounts Using Attendance/Absence Quotas Set Base Entitlements Rules for Generating Absence Quotas Entitlements Base Entitlement for Absence Quota Generation.
Personnel TimeIMG Managing Time Accounts Time Data Recording and Administration Management Rules for Calculating Absence Entitlements Using Attendance/Absence Quotas Determine Validity and Deduction Periods.Generating Absence Quotas
IMG Managing Time Data Recording and Administration Personnel Time Management Calculating Absence EntitlementsTime Accounts Using Attendance/Absence Quotas Define Set Base Entitlements Rules for Generating Absence Quotas Generation Rules for Quota Selection.
Define Public Holiday Work Schedules Personnel Time Management IMG Classes
Personnel Work Schedules Personnel Time Management IMG Group Personnel Subareas for the Work ScheduleSubarea Groupings
IMG Group Personnel Subarea Groupings Work Schedules Personnel Time Management Personnel Subareas for theDaily Work Schedule
Daily Work Schedules Work Schedules Personnel Time Management IMG Define Daily Work Schedules
Work Personnel Time Management IMG Define Period Work Schedules. Period Work Schedules Schedules
IMG Define Day Day Types Work Schedules Personnel Time Management Types.
Day Types Work Schedules Personnel Time Management IMG Define Day Types.
Day Work Schedules Personnel Time Management IMG Define Special Days.Types
Work Personnel Time Management IMG Define Employee Subgroup Work Schedule Rules and Work Schedules Schedules Groupings
Work Work Schedules Personnel Time Management IMG Define Groupings for the Public HolidaySchedule Rules and Work Schedules Calendar.
Work Work Schedules Personnel Time Management IMG Set Work Schedule Rules and WorkSchedule Rules and Work Schedules Schedules.
Work Work Schedules Personnel Time Management IMG Generate Work Schedules ManuallySchedule Rules and Work Schedules
IMG Set Planned Working Time Work Schedules Personnel Time Management Default Value for the Work Schedule.
Personnel Time Management IMG Set Default Value for Time Management Planned Working Time Work Schedules Status.
Time Data Recording and Personnel Time Management IMG Define Personnel Subareas for Substitution Substitutions Administration Types.
Time Data Recording and Personnel Time Management IMG Set Defaults for Substitution Types. Substitutions Administration
IMG Absences Time Data Recording and Administration Personnel Time Management Group Personnel Subareas for Attendances and Absence Catalog Absences.
Time Data Recording and Personnel Time Management IMG Define Absence Types. Absence Catalog Absences Administration
IMG Absences Time Data Recording and Administration Personnel Time Management Define Counting Classes for the Period Work Absence Counting Absence Catalog Schedule.
Time Data Recording and Personnel Time Management IMG Rules for Absence Counting Absence Catalog Absences Administration Group Employee Subgroups for Time Quotas.Absence Counting (New)
IMG Absences Time Data Recording and Administration Personnel Time Management Group Rules for Absence Counting (New) Absence Counting Absence Catalog Personnel Subareas for Time Quotas
Time Personnel Time Management IMG Absence Absence Catalog Absences Data Recording and Administration Define Rules for Rounding Counted Rules for Absence Counting (New) Counting Absences
Time Data Recording and Personnel Time Management IMG Rules for Absence Counting Absence Catalog Absences Administration Define Counting RulesAbsence Counting (New)
Personnel TimeIMG Absence Catalog Absences Time Data Recording and Administration Management Define Counting Rules Rules for Absence Counting (New) Absence Counting Deduction rules for Absence quotas
Time Personnel Time Management IMG Absence Absence Catalog Absences Data Recording and Administration Assign Counting Rules to Absence Types.Counting
Personnel TimeIMG Attendances/Actual Working Time Data Recording and Administration Management Define Attendance Types.Times
Time Personnel Time Management IMG Attendances/Actual Working Times Data Recording and Administration Assign Counting Rules for Attendance counting (New) Attendance counting Rules to Attendance Types.
Time Data Personnel Time Management IMG Managing Time Accounts Using Attendance/AbsenceRecording and Administration Define Absence Quota Types. Time Quota Types Quotas
PersonnelIMG Managing Time Time Data Recording and Administration Time Management Calculating Absence Entitlements Accounts Using Attendance/Absence Quotas Permit Quota Generation Without TimeAutomatic Accrual of Absence Quotas Evaluation.
Time Time Evaluation Personnel Time Management IMG Set Personnel Subarea Groupings for Time Recording.Evaluation Settings
Time Data Recording and Administration Personnel Time Management IMG Managing Calculating AbsenceTime Accounts Using Attendance/Absence Quotas Set Base Entitlements Rules for Generating Absence Quotas Entitlements Base Entitlement for Absence Quota Generation.
Personnel TimeIMG Managing Time Accounts Time Data Recording and Administration Management Rules for Calculating Absence Entitlements Using Attendance/Absence Quotas Determine Validity and Deduction Periods.Generating Absence Quotas
IMG Managing Time Data Recording and Administration Personnel Time Management Calculating Absence EntitlementsTime Accounts Using Attendance/Absence Quotas Define Set Base Entitlements Rules for Generating Absence Quotas Generation Rules for Quota Selection. -
Date Picker has to submit the default value after the page load???
Hello All,
I have 2 date pickers 'Start' and 'End' on a screen with report that has a where clause using above values. Start defaults to current date, End defaults to current month end date, I have another radio group with default to Monthly......
Now when the page loads, I see the default values for 'Start' and 'End' date pickers but the report doesn't reflect those values. I added an on change dynamic action, and so when I change the value of 'End' date picker, it submits the page and now the values are reflected in the report........
I tried creating another dynamic action > with event On Page Load.....and disable fire on page load, and to submit the page, this is causing an infinite loop of submitions........can you please tell me how to achieve this with out putting an exclusive submit button on the Screen.......
Thanks for your time.
DKuser12296343 wrote:
Hello All,
I have 2 date pickers 'Start' and 'End' on a screen with report that has a where clause using above values. Start defaults to current date, End defaults to current month end date, I have another radio group with default to Monthly......
Now when the page loads, I see the default values for 'Start' and 'End' date pickers but the report doesn't reflect those values. I added an on change dynamic action, and so when I change the value of 'End' date picker, it submits the page and now the values are reflected in the report........
I tried creating another dynamic action > with event On Page Load.....and disable fire on page load, and to submit the page, this is causing an infinite loop of submitions........can you please tell me how to achieve this with out putting an exclusive submit button on the Screen.......
Thanks for your time.
You don't have to submit the page here.
What version of apex?
What report is it? i.e. Interactive report/Classic report
Depending on your version of apex you can simply use the Page Items to Submit attribute to set the session state -
Why the default value is not the Oracle recommended?
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?>
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?
The default database blocksize of 10g is 8k.
>
8 * 128 = 1024
128 >= 2
At least twice the size does not mean exactly the doubled size.
There is no contradiction between the documentation and your observation in this case.
Kind regards
Uwe
http://uhesse.wordpress.com -
Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu NHey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS) -
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF -
How to set the default value of a LOV that is found in a view criteria
HI,
I need to set the default value of an LOV that is found in a view criteria. I tried to set a groovy expression but unfortunately it wasn't read. i also tried to bind the LOV to a bind variable and set the value of the bind variable in the constructor of my backing bean but unfortunately the default value appeared the second time i entered the screen and not on page load.
Can anyone advise where can i set the default value,
Thanksif you want some default value in LOV. you go to edit list of value wizard-> UI hint->include no selection Item checkbox -checked.use labeled item first of list- and beside that put the label. but when you try to get value, it will show null.but you can manipulate in ur java , if it default value
-
How can I change the default value of a command ?
I want to be able to change the default value of a comand when the vi
is running. (I know how to do that with a right click when the vi is
not running).
In fact I would like the user of the vi to be able to choose a new default value for a command.
How can I do that ?You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
Try to take over the world!
Maybe you are looking for
-
Kernel task is using many resources on my mac
Hi I was working on my Mac but is coming very slow sometimes so I found the problem is the kernel task. Lex I already use the Clean My Mac and since the first time I delete a lot of things I don't even remember how many. Should I format my drive? Abo
-
How can I put text on individual photos
I would like to put text on some of my photos,,,,How?
-
Feedback:Error when trying to save a site
I'm new to Muse and yesterday I tried saving a new site I'd created (I'd actually created two and had them both open at the same time if that matters?) Anyway when it came to save them it told me that I could not as the file was either open somewhere
-
Table entry in production asking to create a transport number
Hello, I have created on transparent table with delivery class A and data class DATA0. created its table maintenance and created a tcode of that. and moved all this to production. Now, when I am creating entries in that table through tcode, its askin
-
TS1702 Phone stuck on the updating screen. Black with the apple and loading bar.
Updated to iPhone ios6. It started uploading the software. Iphone screen black with the apple and the loading bar. It's stuck there. Won't do anything. Itunes doesnt even recognize it anymore.