The document could not be saved error when Saving to a SharePoint Document Library

I am having an error when opening and commenting on Adobe PDF's that are stored in SharePoint 2010. When I attempt to save a PDF I have commented on I get the following error:
The Document could not be saved. The server said:
"The operation failed because an unexpected error occurred. (Result code: 0x80020005)"
This seems to happen in a Document Library that is based on a custom template with Managed Metadata columns, when we remove the columns it seems to work and when we create a library with a standard document library template and manually add the manage metadata columns it also works fine.
We would make this change to all document libraries where this issue occurs however this template is applied to 100's of libraries with thousands of documents stored in them. Is there anything we can look at to attempt to resolve this issue?
Word, Excel, PowerPoint, etc. documents seem to work fine in these libraries.

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

Similar Messages

"The operation could not be completed" error when starting VS 2013 (premium)

It was running fine and then msbuild wouldn't stop so I had to kill VS. After that I get the above error every time I try to start VS.
Same result with the various console invocation devenv options (/safemode, /resetuser, ...)
My path is < 2048 chars. I've also re-registered actxprxy.dll and oleaut32.dll to no avail.
I've run the VS2013 repair a couple times, no errors reported but I still get the error.
Errors in the activity.xml log file are:
<entry>
<record>28</record>
<time>2015/02/13 18:54:31.800</time>
<type>Error</type>
<source>VisualStudio</source>
<description>SetSite failed for package [Task Scheduler Package]</description>
<guid>{00CD9DDA-7350-457C-A240-71BD667FC4DE}</guid>
<hr>80131534</hr>
<errorinfo>The type initializer for 'Microsoft.VisualStudio.ErrorHandler' threw an exception.</errorinfo>
</entry>
<entry>
<record>29</record>
<time>2015/02/13 18:54:31.800</time>
<type>Error</type>
<source>VisualStudio</source>
<description>End package load [Task Scheduler Package]</description>
<guid>{00CD9DDA-7350-457C-A240-71BD667FC4DE}</guid>
<hr>80131534</hr>
<errorinfo>The type initializer for 'Microsoft.VisualStudio.ErrorHandler' threw an exception.</errorinfo>
</entry>
and
<entry>
<record>32</record>
<time>2015/02/13 18:54:31.810</time>
<type>Error</type>
<source>VisualStudio</source>
<description>SetSite failed for package [Environment Package Window Management]</description>
<guid>{5E56B3DB-7964-4588-8D49-D3523AB7BDB9}</guid>
<hr>80131534</hr>
<errorinfo>The type initializer for 'Microsoft.VisualStudio.ErrorHandler' threw an exception.</errorinfo>
</entry>
<entry>
<record>33</record>
<time>2015/02/13 18:54:31.810</time>
<type>Error</type>
<source>VisualStudio</source>
<description>End package load [Environment Package Window Management]</description>
<guid>{5E56B3DB-7964-4588-8D49-D3523AB7BDB9}</guid>
<hr>80131534</hr>
<errorinfo>The type initializer for 'Microsoft.VisualStudio.ErrorHandler' threw an exception.</errorinfo>
</entry>

Hello Charlie,
Based on the error info, 'Microsoft.VisualStudio.ErrorHandler' is used as "Provides methods for dealing with common COM error codes". Some components send this error out but I seems cannot find the info about the specific component. Do you have
any more error info in your ActivityLog.xml log?
If you do not have any info, we may need to use process monitor tool:
https://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Please open this tool and then open Visual Studio to reproduce the error.
After that, please filter the Visual Studio related process and upload the log to OneDrive and share the file to here.
I think it will contains some info about the specific corrupt dll or any com components. Then we can try register it again.
By the way, may I ask why you register actxprxy.dll and oleaut32.dll here? Do you have any error info about them?
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"The attempted operation failed. An object could not be found" error when double clicking on an ics file

Operation System: Windows 8 Pro
System Type: 64-bit Operating System
Office: MS Office Professional Plus 2013
I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
1-) Open up the Control Panel and go to Mail section
2-) Click "Show Profiles"
3-) Click "Add" and give a name to your profile.
4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
5-) Finally, set that profile to be used always.
Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
Is this a known issue or specific to me?
Thanks!

yes, I have the same problem.
The workaround of saving the ICS file and then importing it into the current calendar
works,
but the ICS calendar
displays in other section, NOT in the section of my old events.
why ??

How do I resolve a "This document could not be signed" error?

How do I resolve a "This document could not be signed" error? I received this error when trying to sign a document with multiple signature boxes. This particular box locks down most of the document. It's normally not an issue, but periodically we have a copy of this same form that does not work.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

TS1470 hi i have an iphone 4s i did an update to ios 7 , after few days i got message to update it againe to 7.0.2 but i got a message to connect my iphone to the itune.and in my computer i got a message the iphone could not be restored error occurred 29

hi i have an iphone 4s i did an update to ios 7 , after few days i got message to update it againe to 7.0.2 but i got a message to connect my iphone to the itune.and in my computer i got a message the iphone could not be restored error occurred 29

l3az wrote:
... got a message the iphone could not be restored error occurred 29
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart

The memory could not be written error

Hi Hussain
when I am trying to run select * from hz_locations through TOAD, it is gigiving me error as" Application error: The instruction at "0*77c46fa" refrenece memory at "0*12540000" The momory could not be written. but when I checked from backend this query is working fine,
please suggest
Regds
Bilal

Hi Bilal;
when I am trying to run select * from hz_locations through TOAD, it is gigiving me error as" Application error: The instruction at "0*77c46fa" refrenece memory at "0*12540000" The momory could not be written. but when I checked from backend this query is working fine, I belive you should restart your pc, if you have still have same problem from TOAD, try to repair or reinstall it! This error related wiht toad
Regard
Helios

ITunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined error message

I've been getting the "iTunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined" error message for a while. I have tried restoring my iPod but as soon as I try to sync it again (even with nothing changing in iTunes or on the iPod) I get the same error message. Whenever I want to add music to my iPod I have to delete everything and then wait hours for it to restore which is ridiculous. Anyone have any other suggestions for fixing this problem?
I'm using a 3rd generation iPod touch with 4.2.1 software and iTunes 10.5.3.3

The fact that there is so many discussions with no clear answer is the problem.
I went back and looked through all the different suggestions and and tried them all to make sure I didn't miss anything. What finally worked for me was making sure all apps were updated on the iPod and making sure all apps were updates in iTunes (under the Library>Apps tab NOT under devices) and then syncing.

Hello, I have bought an iphone two weeks ago. Now I have a big problem. Whenever I receive a phone call, the caller could not heare me only when I switch to the handsfree speakers phone. The same issue accurs, when I call somebody.

I have an iphone and whenever I receive a phone call, the caller could not hear me only when I switch to the hansfree speakers phone. the same issue occurs whenever I call somebody. Could anybody help me?

Hi
You should ask your relative to physically take the iPhone to the store rather than shipping it because as diesel vdub has said:
"No Apple store will accept an iPhone shipped to them"
All you have to do is safely pack and ship your iPhone from the Philppines to your California-based relative.
HTH?
Tony

Configuration could not be verified error when connect to Cox

Hi,
I'm trying to connect to Cox but keep getting the "configuration could not be verified" error. I can access my Cox account through web mail and I've retyped and retried my email address and password enough times to be confident that it's correct. I've also verified my account settings (incoming/outgoing server and ports) with Cox support, and I've checked the my firewall and antivirus settings (norton 360). No luck with anything.
I'd really appreciate any thoughts anyone has!
Thanks,
David

I should have added that my Cox connection has been set up several years now with no problems but suddenly quit working. I checked everything I know to check, including firewall settings, and finally deleted email account and tried to set it up again. Still getting the same error.

SQL2310N the utility could not generate statistics: error "-911"

Hello,
we have a 46c system with DB V.8.2.2. Everytime we planned over db13 the runstat_all we get an error message.
Errormessage: Error -2310 in dmdb6upd.c(687):
SQL2310N the utility could not generate statistics: error "-911"
Regards,
Alexander Türk

Here some more information:
07.01.2007 13:00:31 Ausführung des logischen Kommandos REORGCHK_ALL auf Rechner b0d0m102
07.01.2007 13:00:31 Parameter: -t all -n PH0 -z 3600 -m b -l 1800
07.01.2007 20:01:09 pct_long_lob has been set to 10 percent
07.01.2007 20:01:09 Checking for old entries in db6treorg/db6ireorg ...
07.01.2007 20:01:09 Reading table names for runstats ...
07.01.2007 20:01:09 Tables to process: 26350 ...
07.01.2007 20:01:09 ERRORMESSAGE: Error -2310 in dmdb6upd.c(687):
07.01.2007 20:01:09 SQL2310N The utility could not generate statistics. Error "-911"
07.01.2007 20:01:09 was returned.
07.01.2007 20:01:09
07.01.2007 20:01:09 table: SAPR3.DB6PMHT
07.01.2007 20:01:09 ERRORMESSAGE: Error -2310 in dmdb6upd.c(687):
07.01.2007 20:01:09 SQL2310N The utility could not generate statistics. Error "-911"
07.01.2007 20:01:09 was returned.
07.01.2007 20:01:09
07.01.2007 20:01:09 table: SAPR3.DB6PMHT_HD

The data could not be saved because the server could not be contacted - Error

Hello, I'm a beginner in ligthswitch, so, I made a couple of screens and I made the database and attach to the application but when i want to save the new records shows me this error:
The data could not be saved because the server could not be contacted. Please check your network connection and try saving again.
The operation has timed out.
I verify the database, the record is saved but the application show me the error.
Please help me I have to deliver this screens today.
Thanks!
Boanerges. Mr 3: 17

Hi Elmer,
I researched this error message, I think you can try the methods below:
Increase the timeout of the connection between the client and the server
Increase Client timeout, and it is set in the Application class in the Client Project
For further information: Error message: Unable to save data

Acrobat X Pro shows "The document could not be printed" error

I used Acrobat X Pro to open an PDF file and then re-print it to another PDF by Adobe PDF printer. It shown a dialog with "The document could not be printed" message.
Why do some PDF files occur this error ? How to fix this problem ? Thanks.

Hi,
Thanks for reporting the problem.
It seems you are unable to print any pdf from Acrobat. You mentioned that you are able to print the same PDFs from iphone and other devices.
Are you able to print from any other application(e.g. word, notepad) from the same machine where you are seeing the issue. It looks to me that your machine is not able to establish contact with the printer but your other devices are able to.
Please confirm.
Thanks,
Atul

"The operation could not be completed" Error

Every time i try to open the pixel bender filter I get an error that says "The operation could not be completed" Any Ideas? Windows 7 i5 processor and 8 gb of ram. I tried re installing, and several images from small to max size.
Thanks

Perhaps your issue has been resolved by now. I read all the responses as I was also having the Error:
The operation could not be completed." message and this is how I resolved it. I have Win XP with
3Gb Ram,and the same graphics card you referenced, by Nvidia. I looked as the document size and it was at 370 dpi so I dropped it down to 72 and saved it. Then I had no problem opening Pixel Bender and using the various filters in it.

Disk utility reports "Device could not be opened" - error when trying to format a new drive in a Mac Pro 1,1

MacPro 1,1 Quadcore 3 GHz (2006 "Woodcrest")
32 GB RAM
ATI Radeon HD 5770
OS X 10.7.5 Lion
I have encountered the following behavior when trying to format a new drive with disk utility. This description has also been send via the Mac Pro feedback as a bug report to Apple.
On searching the web and forums with this particular error message and behaviour I could not find any usful results. So maybe the following description may be helpful for some users.
Best regards.
1. Drive Bay 1 contains the original 250 GB Startupdisk. It works without errors.
2. Drive Bays 3 and 4 contain each a WD Caviar Black 2 TB SATA 3 HDD. They work without errors.
3. I have purchased a third WD Caviar Black 2 TB HDD.
4. In Drive Bay 2 there has been a Seagate 750 GB HDD, which worked in conjunction with all the other drives without error.
5. I exchanged the Seagate HDD in Drive Bay 2 with the new WD Caviar Black 2 TB HDD.
6. On starting the system, it will report to initialize the new drive.
7. On trying to initialize the new drive with disk utility it reports the error [translated from German] "Erasing of the volume has failed. The device could not be opened."
8. I thought that the drive is faulty. Thus I created an RMA-Case at WD. They exchanged the drive without problems.
9. On getting the exchanged WD Caviar Black 2 TB drive I put it in Drive Bay 2 as before.
10. On trying to erase and format the exchange drive I got the same error message "Drive could not be opened."
10.1 On selecting the physical drive in the devices list, disk utility reports all information in the bottom area of its window as usual, e. g. hard disk description, connection bus, type and place, capacity, write status, SMART-status, partition scheme.
10.1 On leaving that drive selected in the devices list and clicking the info-button, disk utility will also report additional information as usual, e. g. Name, Type, partition scheme, media-identification, media name, media type, device tree, … , number of relocated sectors, etc.. All this information appears to be valid, as can be compared to the other devices information inside the other Drive Bays. Also the disk numbering scheme appears to be standard - 4 HDDs give the numbering disk0, disk1, disk2, disk3.
10.2 From that information I conclude that the SATA-bus and connectors electrically work properly, the drive has spun up and can be accessed by the system normally.
11. I powered down the computer, took out the HDDs from Drive Bays 3 and 4 and put the caddy with the new exchange drive in Drive Bay 4 [Maybe, I could have also just left it alone in Drive Bay 2, or 3].
12. After powering on the system, disk utility will quick format the exchange drive without any error message. Also, when erasing again by selecting the option to write zeros to the drive, disk utility will finish without error.
13. After disk utility finished formatting, I put back the original drives into Drive Bay 3 and 4 and put the now newly formatted drive back into Drive Bay 2.
14. After switching on the computer the system start and login proceeds without any error message. All drives appear as expected on the desktop.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

The document could not be saved error when Saving to a SharePoint Document Library

Similar Messages

Maybe you are looking for