The edited picture becomes very small and I can't change it.

I edited a photo in Elements 11 and that went good. When I finished with the editing I saved it however when I checked it later it was so small and I couldn't keep it at the larger size. When I edited it I zoomed it larger for working on it and it goes larger if I zoom in but after it is saved it is small again.

O.K. I have the picture with the bear and it has the 1824 pixels and then I go to the other picture with the two people in it. I cut the people out of that picture and then I clicked on copy and then I go back to the picture of the bear and then I click paste. The two people appear on the picture with the bear. I then make them the size that I want and also position them where I want them. I then went to the eraser and erased out the background that I did not want in the picture. I did zoom in to make the picture larger when I was erasing the background and then when I was finished I zoomed back out. I saved the picture and then that was when it became about half the size of the original picture and the pixels changed for the width from the 1824 to 2552 but I was left with this very small photo.
Maybe it is the picture that I am trying to do this with or maybe it is me I have no idea.

Similar Messages

Some of my apps on my ipad open but become very small and i cant use them

Some of my apps on my ipad open but become very small and i cant use them
Has someone encounter thsi problem?
Any solution?

These apps are probably meant for the iPhone/iPod touch. Some apps are universal, and other have dedicated iPad versions.
http://support.apple.com/kb/HT4082
Here is a support article addressing this.

Can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter

can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter ???

Right click one of yur clips in the event browser and choose Transcode Media. Make a test project and playthat clip. See whether that solves your lag.
Russ

My hard drive needed to be replaced for my iMac. When I move the photos from my portable hard drive back into iPhoto, the pictures show up small and I can't adjust them. How do I fix the pictures so they are full size again?

My hard drive needed to be replaced on my iMac. When I try to move the photos from my portable hard drive back onto the Mac, they are small and can't be edited or made any larger. How can I fix them?

YOu restore your phone from your icloud backup.
http://support.apple.com/kb/HT1766

I am inputting my guitar tunes(.wav files) and I am trying to do an FFT on this. Wen I do, the FFT signals are very small and are not on the right frequency scale. However I am able to simulate a sine wave and get an accurate FFT plotted as a cluster.

My .wav file has about 8100 samples and has a sample rate of 11050. I pass the samples into FFT. The output I devide by the size of the array(8100??). This I seperate into 'real' and 'polar'. The 'real' I use to plot. My plot has a starting value of '0' on the X axis. My problem is with the other value for the cluster, i.e; To plot this I need 1. 'real' part of the FFT output. 2. the 'x' axis starting value(0) and 3. how do i get this value? I tried deviding the sampling rate by the size of the samples, but
the FFT plot is really wrong. Anybody has an example vi to convert .wav files to FFT? Thanks alot!!!

Mark! Thanks again for the extended answer!!! I have learned alot from that example you gave me. Here is a simple VI which I am trying to plot as an FFT plot. I have also included a 0.5 sec .WAV file. If you have the time, I will appreciate it if you can tell me how to plot the FFT. This vi is very simple. You can open the included .wav file on the included VI, and you will understand why I am unable to plot an FFT. I am doing this to process my music. Appreciate it!!!
Attachments:
fft_test.vi ‏85 KB
guitar.wav ‏8 KB

I purchased my iMac used. When I try to update my apps the computer automatically fills in the previous owner's Apple ID and I can't change it. Any ideas?

I purchased my iMac used. When I try to update apps in AppStore, the computer automatically fills in the previous owner's email address and it won't let me delete it to enter mine. I have been using my own apple ID and password on this computer for other things without a problem. Any ideas?

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

Where does the "Submit Form" button get created and how can I change the associated email address?

I've created a pdf form using Adobe Live Cycle ES 8.2 and it has been working fine. Now I need to change the email address it gets sent to when the user clicks on the "Submit Form" button.
How can I change this email address?
Thank you in advance

Yes, that is correct.
I did not manually add this button, so I am assuming it was somehow automatically created.
It worked great up until now that I need to change the "To:" email address.
I've look through the XML code associated this this email address and changed it every where I could find it, but it still hasn't changed my results. So, I have no idea how to change this and as stated above, if I create a new form it automatically sets it up to be sent to the wrong email address. Not sure why or how to change it?
Let me know if you need further info to help me out.
Thanks again

Why is the Thunderbird main screen message list text so small - and how can I change it

I see lots and lots of complaints but NO suitable answer! Most answers don't even answer the question but instead tell how to increase MESSAGE font size - not the main screen "message list". Suggestions to change screen resolution are common but are ludicrous. One would have to change resolution every time they went in or out of Thunderbird! CTRL+ is also suggested but does not work on the message list. Creating and inserting CSS into the profile is a ridiculous suggestion for most users.
Why is there no user friendly setting provided for text size on this screen?

Please stay with one thread per issue. Continue In your original thread here.
https://support.mozilla.org/en-US/questions/1038776

After changing from IE to Firerfox mozilla, the fonts on email are too small and I can't change them

After changing from Internet Explorer to Firefox Mozilla, I noticed the font size, like this one, was the standard font in everything. I want a larger font in '''everything''' I read and type, including emails.

My two suggestions would be find an epub editor, (never seen one sure one exists)
or use Zoom on your device. It's not the best solution, but it shold at least make it readable.
You can enable Zoom under Settings.

My default downloads folder is on my server at work, so when I'm at home the downloads window won't open and I can't change my download settings.

I've tried resetting my downloads folder to default, but it just goes back to the downloads folder on my work server that I won't be able to connect to until next month. When I try to select a different download folder, the "browse" button doesn't work. I've also tried selecting the option to ask me where to save each time, but nothing pops up when I try to save something.

hey jessicats86, please enter '''about:config''' into the locationbar of the browser (you might have to confirm the info message in case it shows up) and search for the preferences named '''browser.download.dir''' & '''browser.download.lastDir'''. right-click each of them and reset the value to the default. then restart firefox and try to set the download folder again in the options panel.

Fontsare to small and I can't change them and unable to submit feedback in help

Am really upset. I submitted a question and tried to browse through questions asked and answers given. There appears to be no way to do that from the help screen. What trash. I even went to Feedback to complain but coud not even get Submit feed back to work What a waste of my time.

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(108901)

What is the default swapiness of Arch? And how can I change it?

Actually, i'm only assuming my swap is even working, because it never seems to use it, except when I hibernate/suspend.
Does Arch use a "swapiness" value like Ubuntu does? What is it by default? I think Ubuntu's was either 60 or 80.

I'm not sure what the default swappiness is, since I've modified mine. If you've got a system installed and haven't touched anything you can find the default swappiness by doing
cat /proc/sys/vm/swappiness
as root. To adjust the swappiness, put
vm.swappiness = N
in the file /etc/sysctl.conf where N is between 1 and 100 (I believe.) Lower swappiness means that Linux will require higher memory pressure before it starts swapping things out.
Regards,
j

Why downsizing the edited picture while saving?

After saving edited pictures with the app for Android, it seems like the pictures are saved with lower resolution. Is there a possibility to save full resolution? How and where to change this setting?
I did not know this until I came back from holiday. Because I liked my edited pictures better, I deleted the original once. When showing them to friends and family the edited pictures where much smaller as the deleted original once. Is it possible to change this in the future?
Thanks for information,
Ans

I did some testing and got the following result: the orginal picture is 2592 x 1944. After only cropping a little piece from the original and then pressing the save icon the picture is saved 889 X 740. The same original picture edited by changing the exposure and pressing the save icon is saved 1024 x 768. I tested with a second picture, with the same result. It happens as well if you select first the pic and then edit, or first edit and then selecting the pic.
It would be great if you could find a solution. The free app has a lot of feature. Hopefully we can use them in the future and keep the orginal seize of our picture.
Greetings,
Ans

I am using a Mac and when I save my files as a jpeg, the files become much smaller, and consequently darker and blurrier. What can I do to fix this?

I am using a Mac and when I save my files as a jpeg, the files become much smaller, and consequently darker and blurrier. What can I do to fix this? I have tried to figure out how to chat with someone at Adobe, but they certainly don't make it easy to do. At the moment, this program is useless to me. Very depressing....

Hello,
I would like to inform you that not all the browsers and online PDF readers support copying text from a PDF. If you have opened the PDF online, please download PDF file to your computer and then open the file in Adobe Reader.
Please share a screenshot if the issue still persists.
Regards,
Nakul

I have a Windows 8.1 machine. I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?

I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?

There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?

The edited picture becomes very small and I can't change it.

Similar Messages

Maybe you are looking for