The ENVY 110 is connect to the internet thru the router, how do I direct print too?

I have a desk top computer next to the HP Envy 110, and am having trouble figuring out how to use the printer. It's connected to the router, but it disconnects when the USB port is plugged in. Is there a way to print from the desktop directly without plugging in? The desktop does not have wireless, but there is a Netgear N300 adapter plugged in to connect to the router. I would appreciate any ideas.

Connect the printer to the router usung the Wireless Setup Wizard on the frot of the printer.
Your computer will be able to connect to the printer as long as the computer is connected to the same rouer (yes, even with an Ethernet cable, it will be able to communicate with the printer).
Let me know what operating system you have and what router you are using and I can provide more specific help.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Cannot get envy 110 to connect to web services, although when first plugged in no probs

as above, product worked perfectly out of the box but now will not connect to web services, on my home network everything else works fine, any ideas???

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I cannot print from my iPad using airport express. My printer is not AirPrint compatible but is connected to airport express thru USB port. My laptop can print with no problem thru the express unit. My lap top is no a mac.

Good day, my iPad does not seem to pick up my printer. My printer is not AirPrint compatible but is connected to my airport express thru the USB port. My laptop which is windows type connects to the printer via airport express thru bonjour and this work well. My iPad does not pick up my printer thru the airport express. I have read about different software that you can download but this seems to be only if you are using a mac. I know my express is working fine as I can use airplay thru my iPad. Any ideas? I do not want to go to the expense of changing my printer, when there was no mention in the express details that your printer had to be AirPrint compatible or indeed wireless.

See this article to learn how to print from an iPad to your USB printer when you have a PC. The PC will need to be running when you want to print from the iPad.
Print from your iPad with PrintCentral | How To - CNET

Orarrp: How to suppress the extra formfeed in a direct printing.

We are using ORARRP 1.3.4 to print rrpt files directly to a line printer. After report, the ORARRP mechanism send an extra form feed (as we see at ORARRP debug file). Is there a way to avoid this form feed ?
Thanks.

Please help ! I tried the "send_form_feed" and "postscript_dos_print" parameters without success. The extra form feed is always there. Thanks.

Do you have the ability to send an imvie via email and then send it to someone else with an apple product. Once they recieve the email, how to they edit it too?

In IMovie how do you send the whole presentation, then share it to another apple id. After that, when they open it from their apple product, are they able to edit it?

Take a look at this.
Rescue email address and how to reset Apple ID security ...

I use MACBOOK , APPLE AIRPORT AND EPSON PRINTER. I AAM GETTING MESSAGE "PRINTER OFFLINE". PRINTER WORKS WELL AND INTERNET WORKS WELL. How can I get printer to respond

I use a macbook, apple airport and epson printer. After several printer jobs, I get a message "printer offline". I have tried restarting computer. restarting printer and still cannot connect, I can print directly with a USB cable. How can I connect to my printer via the airport?

Delete the printer in System Preferences and re-add it. You may also want to restart the Airport.

Cannot get an IP from the Router - Limited or No Connection

Help!
Hello,
I have a Linksys Wireless G router and 2 XP computers that were
working fine.
I am using it wired - no wireless being used.
Now one get an error that is there is low network connectivity and
cannot connect to anything.
The other computer - fine. So X - no connection, Y - connected
I tried swapping cables - same situation (different ends, new cable,
the one from Y) - X no network, Y is fine. Switched router ports -
same situation X-no, Y - yes
Plugged in modem directly into X - works FINE.
I did check the security center in the control panels - in both cases
the fire wall is on, but the windows firewall is off. I cannot
disable the firewall from X - it must be the router firewall (I tried
removing any filtering from the router - same issue). Again, Y works
fine.
Only when going through the router does this cause a problem.
Direct connection is fine.
To top it off, when computer X is booted up in safe mode and going
through the router - it is fine. An IP address is taken. In regular
mode the computer boots up and shows an IP address of 169.254.x.x. I
tried power cycling the mode, router, both, reboots - same issue
169.254.x.x. I tried hard coding the IP address to the one found on
the router and in the range of the router - no dice.
Why can't I get an IP address from DHCP?
Computer X does not Norton Antivirus on it - I disabled it in regular
mode - same problem. I do not want to uninstall it.
I read about a Service Pack 2 problem with XP - but the problem does
not appear in Safe Mode with Networking and I did try the fixes my MS
about it - to no avail. The underlying issue is that computer X
cannot get an IP address from the router.
Computer X work when:
- there is a direct connection from the modem (DSL) to the computer
in regular mode
- booted up in Safe Mode and attached to the router - can ping it,
surf the net
Computer Y is fine with the Router.
Suggestions on how to proceed?
Help!
Thanks!
Tmuld
Computers make it easier to do a lot of things, but most of the things they make it easier to do don't need to be done.
- Andy Rooney

Hi,
I tried it - same problem.
Did the netsh command and reboot.
Did the mtu change.
Same problem.
Reset the router and tried all over - same situation.
The DHCP client list shows 2 ip addresses - one for the computer that does not work and one for the one that does not.
Same IP addrsses as before.
192.168.1.100 - does not work - but the MAC address hows, and so does the computer name.
192.168.1.101 - does work.
Again, the computer works in safe mode (and connected to the router) and with a direct connection. The issue has to be with the router.
Is there any way I can for the computers to swap router IPs?
Thanks,
Tmuld
Computers make it easier to do a lot of things, but most of the things they make it easier to do don't need to be done.
- Andy Rooney

Does the route list gets reset when adding route pattern in version 9 of CUCM?

Hi All,
I created a new route pattern in call manager version 9 and then associated it to an existing route list. But when I was trying to save the route pattern. I was prompted with the message saying " Any updates to this Route Pattern automatically resets the associated gateway or Route List"
I was not able to see this message on CUCM version 8.6 however on CUCM version 9 it is there.
Does that mean that the route list/gateway will be reset and the existing calls will be dropped?
Or is it a bug?
A response will be greatly appreciated.
Thanks

Hi Farhad,
It does pop up when we modify the Route Pattern in CUCM 8.6 too.
If you asociate the GW/Trunk directly to Route Pattern, yes, it will reset them and calls will be interrupted. To avoid that, we need to associate the Route List to Route Patterns.
//Suresh
Please rate all the useful posts.

Connecting iPad to dlink DIR-600 router

I wish to connect my iPad to a DIR-600 router so I can print wirelessly. The printer and router have successfully connected but I have no idea what settings to put into the iPad to get it to connect. There is no internet involved due to location (building site). I also realise that the router in use is perhaps 'outdated', should I just be looking at upgrading that to solve my issue? Any help greatly appreciated!

Lack of internet is irrelevant to printing. If your Printer is Air Print enabled, the iPad should pick it up when connected to the wireless network provided by the router.
Look for your Printer here: http://support.apple.com/kb/ht4356
If it appears in the list, then simply go into Settings on your iPad, and tap on Wi-Fi. Search for the Dlink Wifi network and connect to it. If your Printer is configured on that same network and is airprint compatible, your iPad should pick it up to Print from any App with the ability ot Print.

My envy 110 works but the web services and eprint services give "connection error". what to do?

My family use Macs and Apple Deskbook and a BT Homehub network. The HP troubleshooting instructions do not always match what is on computer screen. The menu paths that HP gives sometimes do not exist.
The Envy 110 printer was working fine but it often could not be found by the computers so I followed HP instructions to set a Static IP Address on the Printer. But now the Web Service and ePrint Service give a "connection error". Any suggestions? I am annoyed that HP don't give a phone number to help.

When you set that static IP on the printer, make sure of 2 things:
1. The IP address is outside the DHCP range of the router.
2. Use an external DNS, like Google DNS: 8.8.8.8 and 8.8.4.4
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to print from Ipad3 on HP Envy 110 mobile out in the field?

I have bought an Ipad3 and a HP Envy 110, in order to be able to print PDF document mobile, having the printer in my car, so I don't want to use a WiFi network. How do I get it working? If I just put power on the printer, the IPad doesn't "see" the printer. Who knows what to do? Thanks in avance, Peter

If the ad hoc printer mode is not available for the envy, there are some reasonably cheap ways to get a wifi network in your car. A cheap router from best but will generate the wifi network. Does not matter if you have Internet or not. A ifi device will also work, and most/ all of them run on batteries. Lastly, if you have a smart phone or I phone that generates a wifi hotspot, that may be enough to support the printing function. ( I need to test my I phone later today to see if that works.)

If the wifi on my iPod Touch is on nothing else on the router will connect to the internet

Ever since I updated my iPod Touch 4th Gen to iOS 6, If the wifi on my iPod Touch is on nothing else on the router will connect to the internet..
It's the weirdest thing.
My Wired and WiFi computers are experiencing DNS errors, unresolved URLs and in general having difficulty connecting to the internet...
That is.... UNTIL I SHUT OFF THE WIFI ON MYiPOD 4th Gen TOUCH!!!
Then everything works fine.
I've reset my router, several times.
I've reset my Cable Moden, several times.
The problem persists until I disable the WiFi on my iPod

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhateja

Hi，
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support

When I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?

when I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?

Does the iPod connect to other networks?
Do other device connect?
Did the iPod connect to this network before?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Having a hard time connecting to my internet server. it says can't find the server. I'm using ethernet cable and I know that the cable is OK can somebody please help

I'm trying to get on the internet and it is saying unable to connect to your server any ideas what I have to do to get on the internet I know the ethernet cable is OK.

Disconnect the ethernet cable from your mac,
disconnect the modem and the router from the power,
wait for at least 30 seconds,
connect the power to the modem, wait for at least thirty seconds,
connect the power to the D-Link, wait for at least thirty seconds,
connect the ethernet cable to the mac.

The ENVY 110 is connect to the internet thru the router, how do I direct print too?

Similar Messages

Maybe you are looking for