"The file or directory could not be found" video problem
I have embedded a YouTube link into one of my pages and it plays fine when I preview and publish it, however, when it is exported as HTML, I get a grey box with the message:
Here is the link to the published page: http://clickevents.businesscatalyst.com/about-carmichael.html
This is the HTML for the video link within the page:
<iframe width="560" height="315" src="//www.youtube.com/embed/D1y_lp2a1lE" frameborder="0" allowfullscreen></iframe>
Does anyone know how I can resolve this issue?
I ended up finding someone else who was having this problem and it turns out that you just need to add "http:" to beginning of the source url:
<iframe width="560" height="315" src="http://www.youtube.com/embed/D1y_lp2a1lE" frameborder="0" allowfullscreen></iframe>
Similar Messages
-
Photoshop CC: Save for Web- The file or directory could not be found.
I've seen similar questions but have not found a solution that works.
So far, these are the steps I have taken with a MacBook Pro OSX 10.9.2, 16G, SSD:
1. Uninstall and re-installed both Photoshop CC and inDesign CC. (Figured there were shared libraries)
2. Opened PScc with default preferences by using Ctrl+Alt+Shift buttons
3. Uninstalled a couple of plugins that I thought might have been the culprit (Enigma64, GuideGuide)
None of these have worked and I don't know what other steps I can take to fix this problem.
Any ideas????http://forums.adobe.com/community/photoshop
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
I will GUESS that is a permissions problem... over on the Windows side, those kinds of errors are often fixed by right clicking the program icon and selecting RUN AS ADMINISTRATOR from the pop up option list... I have no idea how permissions are handled on a Mac -
The file aqq12s0m.sys could not be found during Win XP installation
When I try to reinstall XP pro I receive message "The file aqq12s0m.sys could not be found. press any key to continue." and when I press it, comp restarts.
Any clue about that file?Hi,
is this the original recovery CD or a genuine Windows XP installation disk??
Following reasons for that problem:
- Disc is damaged or scratched or warped or simply not working
- CD/DVD drive has some problem
- Some piece of hardware does not work properly
- Memory could be faulty
Try to exclude these points and you will get the answer on that file.
Usually, such problem appears (I mean with a non-working file) when the CD is scratched or the drive does not work like it should..
Cheers -
After restoring from Time Machine onto a new Mac, all images in Aperture are now just outlined. Aperture can't find the volume of the master images because that was the volume of my old Mac. Is there any way to tell Aperture to reconnect with the master images in the new volume? I've tried everything I could think of, with the Alt+Cmd upon opening Aperture and the trying all of the repair and rebuild choices, but nothing has worked.
Sorry to hear that this isn't working for you. In all my experience it has always behaved correctly.
Just to be certain the correct procedure is being followed
You select all the missing images in Aperture before running Locate Referenced Files
In the window that opens all the selected images are in the upper part of the window in red
You select one of these images then click in the lower half of the window
In the lower half of the window you locate the file that you've selected in the upper half of the window
the reconnect all button becomes active and you select it
But at this point only the file selected and those in the same folder get reconnected? The overall layout of the file system on the new disk is the same as the old disk?
In your secon post you mentioned needing to use the alt key to make the reconnect buttons active. Is this still the case or do they become active when you go through the above steps? -
Hi,
Installed a new update iTunes Saturday - My file directory could not be found, so I reset the directory path, and 'it' asked me if I would like 'it' to re organise my filing, foolishly (as a beginner, without checking) I selected yes - Many tunes have been duplicated, some have disappeared? Trawled through lots of misleading help files, mailed friends, tried many back routes into Apple web sites and they all wasted my time. Can anyone help?
I have discovered since then, that this resorce has been down over the weekend, which probably explains why I have had so many contradictory responses, so apologies if you all know what the prolem is.
My question is, my TIME MACHINE (which has not been used yet) was tried but looked nothing like that of the U Tube demo, so I am assuming that it needs setting up, however, it has been saving, I just do not know how to recover the data. Can anyone help?
Regads,
Cyfrommayo(If you have a Time Machine backup, go to your User folder/Music/iTunes and select iTunes. Enter Time Machine and go to a backup of iTunes before the above happened. Then select 'Restore' on the bottom right.)
Eric,
Many thanks for your help.
Apologies for not being as skilled as you. I am unable to see what you are saying, can I ask, should I be in TIME MACHINE when I go to User folder/Music?iTunes or iTunes or Finder?
Cyfrommayo -
The cartridge directory could not be found.
Error:
"We couldn't get data from the Data Model. Here's the error message we got:
The cartridge directory could not be found. Use the Windows Installer to repair the application. Exception of type 'Microsoft.Office.PowerPivot.BackEnd.StorageException' was thrown."
Using Office 2013 Standard Edition.
Ran the Windows Installer repair on Office.
I get this error when I attempt to execute Globals.addin.ActiveWorkbook.RefreshAll via an application-level add-in.
I Bing'd the error and came up with nothing (thanks, Bing).
Has anyone seen this error and/or can make any suggestions?
Thanks.
RossHi,
>>We couldn't get data from the Data Model
Have you tried to use the hotfix to resolve this issue? You can download it and fix your application.
https://support.microsoft.com/kb/2837666
And Excel will crash if you have recently applied updates for the PowerPivot add-in, but have not also updated Excel.
To resolve this issue, you should apply this update together with the update from KB
2850006
https://support.microsoft.com/kb/2850006
Best Regards
Lan
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
CFAJAXPROXY: "The specified CFC proxy could not be found."
{ColdFusion 8, latest, Windows.}
The following statement occurs (in an included CFM file):
<cfajaxproxy cfc="crv2_js" jsclassname="ServerProxy">
The "crv2_js.cfc" file is indeed located in the same directory. (If you request it at the same URL, and enter the administrator password, a nice formatted description of the library and its methods dutifully appears, so it is there...)
But the error is:
The specified CFC proxy could not be found.
The path to the CFC must be specified as a full path, or as a relative path from the current template, without the use of mappings.
Looking also on the Administrator screen, I confirm that the directory is not mapped.
Other, <cfinvoke> calls have been used to a sister CFC-library in the same directory without incident. So I am confident that the message that I am seeing is somehow bogus ... but I do not yet know what sort of "bogosity" it must be.Now here is something I didn't expect to see. When I turned on "extended error information" (or whatchamacallit...) I got this additional information in the displayed log:
The specified CFC proxy could not be found.
The path to the CFC must be specified as a full path, or as a relative path from the current template, without the use of mappings.
The error occurred in C:\Inetpub\wwwroot\NCPT\CRV2\cr_PrototypeManager.cfm: line 235
<cfgridcolumn
name="DefinitionIsLocked"
233 : header="Is In Use"
234 : type="boolean"
235 : select="no">
236 :
237 : </cfgrid>
(Ooh... formatted! Now ain't that slick!)
I took the liberty of pasting-in lines 231-232, which the debugging-output did not include. In fact, here is the entire block of code:
<cfgrid name="datagrid" pagesize="5" format="html" width="100%" height="200"
"cfc:proxy.GridSource_ReviewPrototypes({cfgridpage},{cfgridpagesize},{cfgridsortcolumn},{c fgridsortdirection},getPageSize())">
<cfgridcolumn
name="ID"
header="ID"
display="false" >
<cfgridcolumn
name="TemplateName"
header="Template Name" >
<cfgridcolumn
name="PrototypeClassName"
header="Prototype Class" >
<cfgridcolumn
name="Description"
header="Description">
<cfgridcolumn
name="Enabled"
header="Enabled"
type="boolean">
<cfgridcolumn
name="DefinitionIsLocked"
header="Is In Use"
type="boolean"
select="no">
</cfgrid>
So... why on earth would an error like that be showing up at a place like this? (Removing the "select='no'," on the wild-guess theory that it might be "the odd man out," as-expected had no useful effect.)
My hypothesis here is that the "failure location" actually has nothing to do with anything: this is simply the last clause in the CFGrid construct, and the computer is now trying to place a call to this function:
<cffunction name="GridSource_ReviewPrototypes" access="remote" returntype="any">
<cfargument name="page" required="yes">
<cfargument name="pageSize" required="yes">
<cfargument name="gridsortcolumn" required="yes">
<cfargument name="gridsortdirection" required="yes">
<cfargument name="customPageSize" required="no" default="0">
Uh huh... straight out of a demo.
I thought I had just-now discovered the problem, as I was writing this, because the "bind" expression had two additional parameters which are not listed in <cfargument> tags. But, much to my surprise, it didn't fix it.
To be absolutely complete in my description:
In an included header-file, we have: <cfajaxproxy cfc="crv2_js" jsclassname="ServerProxy">
On this (Windows) host, the file-name of the CFC file is "crcv2_js.cfc" and it is located in the same directory as both the cfm and the included cfm.
In the <head> portion of the main page, we have (in an in-line <script> tag):
var proxy = new ServerProxy();
proxy.setErrorHandler(showError);
proxy.setCallbackHandler(handleResult);
I'm starin' at this thing and starin' at this thing and everything I see is screamin' at me, "bogus!" 'Cept I know it can't be.
The generated page-source code includes the following, including a bit which I have highlighted in bold face. I don't know where that bit came from.
<script type="text/javascript">
ColdFusion.Ajax.importTag('CFAJAXPROXY');
</script>
<script type="text/javascript">
var _cf_crv2_js=ColdFusion.AjaxProxy.init(
'/CRV2/crv2_js.cfc','ServerProxy');
but it does seem plausible since the URL to the site-page (on case-insensitive Windows) is, indeed:
http://tlcapps/crv2/cr_PrototypeManager.cfm
and, again, if I type in "http://tlcapps/CRV2/crv2_js.cfc" and prove that I do know the proper ColdFusion admin-password, I get a nice pretty-printed description of this library and its methods... including the one I am trying to call. It does exist. -
Trying to sync voice memos I get "was not copied to the iphone because it could not be found"
I recorded some "voice memos" on my iPhone 5 (iOS 6.1.3). I now just want to get them onto my computer. I have followed the instruction from other posts and selected the "Include Voice Memo" checkbox and also the "Voice Memo Genre" checkbox located on the Music tab. I then click on Sync and get the following error ... "Some of the items in the iTunes library, including ----- were not copied to the iPhone because they could not be found". So I understand that the memos were not copied to the phone ... this is good since I already have then on the phone. I want, instead for them to be copied FROM the phone to the computer. So what's the problem I thought that SYNC'ing meant copying new files from the iPhone to the computer as well as vice versa.
The Voice Memo is toolarge for me to simply email to myself so I need to understand what is causing this so that I can get around it. I have noticed that when I attempt to "Organize Library" and check "Consolidate Files" (suggested by some forum somewhere) when I close the dialog box and sync again, that when I return to the "Consolidate Files" checkbox i see that has actually cleared itself and is no longer checked. I am not sure if this is related or not.
I have a very business recording that is on my iPhone and MUST get this audio off the phone ASAP. Any help would be appreciated.
Sincerely,
gstenstromThe dialog tells you the path to the song is wrong/not there. Make sure you can play it in iTunes.
-
HP scanning error: “An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.” Dr. Google finds others with this problem. Some claim that this is caused by an upgrade of Apple OS10 (which I did do). One claims that HP has a "patch" for this problem. If I try to quit HP scan, it won't quit and freezes my computer. Here's the odd thing. I have no problem scanning in a colored page from Scientific American either before or after this error (after rebooting each time), but simple black and white documents started just today to give the error message above.
Thank you for the link however if I understood all of the instructions I would still be reluctant to try this on my own especially from a third unknown party where some of the information may be wrong and/or lost in translation. (Google translation at the end of this comment). The instructions say to uninstall the software. So if I uninstall the original HP software am I using the original disk to reinstall and then personalize again?What about all of the updates since I originally installed the software? I found the Disk Utility but what is "gatekeeper"And I am using OS X 10.9.1 that is current because I downloaded the latest upgrade. How would I reinstall it?And at what point do I go to the URL for the software drivers and the patch? This is just not practical for someone who is not proficient in troubleshooting applications.I switched to Apple because I don't want to have to go through this kind of process, take my time to fix the application and potentially mess up my system . WHy should I have to try to figure out how to retrieve the normal function in this case, of my All-In-One. If it is so simple why can't HP develop the fix and make it available? Unfortunately right now I have to find an alternative to scan some important business documents that are due today. Since I am using an older printer by technology standards even though it is working fine I may be looking for a replacement and HP may no longer be at the top of my list given that the problem appears to affect other HP models. No need to answer my questions, I'm not going to try this fix based on these instructions. Please HP provide a fix for this problem with the scanner and MAC OS X 10.9.1 compatibility! Translation of the information on the suggested link: We hereby send you a guide that should help you in solving the problem .Please carry the following: 1 Please uninstall the software again .Goto -> Programs - > Hewlett -Packard - > HP Uninstaller 2 Please repair permissions on your Mac .Go -> Utilities -> Disk Utility - > Repair Disk Permissions . 3 Please disable ' gatekeeper ' on your Mac . 4 Reinstall the full software for MAC 10.6 and patch for 10.7 / 10.8 / 10.9. HP Scanjet Software and Drivers for Mac OS X v10.6 features :http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/ ? sp4ts.oid = 457 534 & spf_p.tpst = swdMain & spf_p.prp_swdMain = wsrp - navigationalState 3Di % dx % 253D % 257CswItem % 253Dsj_78355_5 % 257CswEnvOID % 253D219 % 257CitemLocale % 253D % 253D % % 257Cs wLang 257Cmode % 253D % 257Caction % 253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken
Scanjet software patch to Use OS X 10.6 Software and Driver on OS X:http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/ ? sp4ts.oid = 457 534 & spf_p.tpst = swdMain & spf_p.prp_swdMain = wsrp - navigationalState 3Di % dx % 253D % 257CswItem % 253Dcs_97791_1 % 257CswEnvOID % 253D219 % 257CitemLocale % 253D % 253D % % 257Cs wLang 257Cmode % 253D % 257Caction % 253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken -
I recently uploaded the Maverick operating system. I wanted to scan some things on my HP Printer/Scanner and could not . This is the error message I received: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. I am a novice with the computer and have no one to help. I hope someone knows an easy fix.
Thank youThis worked for me:
"Although it is not a 'fix' for the HP issue, I did find a workaround that helped me. In the Preferences Panel in MacOS X you can pull up the Printer/Scanner preferences and scan directly from OS X. I'd not known of this prior to posting here and it worked like a charm."
"Of course, HP should still update their software, but it's good to know that Apple has it covered for them."
I found it here:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/MAVERICKS-WONT-SCAN-HP-C3 09A/td-p/3052105 -
Error 445: The Credential Security Service could not be found:
Hello,
We are trying install Adobe LifeCycle Reader Extensions 6.1 on WebSphere 5.1. But when we access the web page: http://hostname:9080/ares, upload a file, click next, web page generate an error:
An Error Has Occurred
Error 407: An unexpected internal error occurred: 'java.lang.IllegalStateException: javax.servlet.ServletException: Error 474: The credential permission settings could not be processed: 'com.adobe.solutions.ares.ARESException: Error 445: The Credential Security Service could not be found: 'javax.naming.NameNotFoundException: Context: ISDAPP15/nodes/ISDAPP15/servers/server1, name: /ejb/com/adobe/solutions/credentialsecurity/CredentialSecurity: First component in name CredentialSecurity not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0]'.'.'.
I check Adobe website, there is one article (http://www.adobe.com/support/products/enterprise/knowledgecenter/c4690.pdf). But the solution in this article does not work for me.
Any help will be appreciated.
Thanks,
GraceWell ticket system seems slower.
samsung |
kadın |
saç modelleri -
Selected file system item could not be found
I have an issue with a volume that seems unrelated to the other post to which I replied here. This particular volume is an extra slice/partition on the primary software RAID drive (simply made up of two internal drives).
When I select the Volume from the Volumes tab/list in Server Admin I receive an exclamation mark at the bottom with the error: "The Selected file system item could not be found"
Each time that I try to press the Share button and actually set the properties for it and Save and then refresh the shares, that volume is never shared. Seems like an odd issue as there do not appear to be any problems with the volume otherwise.
II am getting the same error message, but only on my Xserve RAID volume. I'm able to adjust permissions on anything else. I currently do not have the option of reformatting the RAID volume right now.
What my initial assumption is that this RAID used some complicated permissions and was connected to a OS X 10.4 Server. I did not do an upgrade to the server but a full format and reinstall of OS X 10.5 Server. My workaround to date has been to change he permissions in the Finder but that's a real pain.
I've tried renaming the volume and a few other tricks.
I'm not sure what to do next to get the OS X 10.5 Server Admin to work with the permissions on my RAID. -
Get message " The local repository database could not be found or is corrupted"
Hi
I want to update the System drivers , but constanly getting the massage
"The local repository database could not be found or is corrupted"
not sure what to do
cannot find any reference to the error
Please assist
This is getting to me
JohanHi,
I have the same issue (on a windows 2008 R2 SP1)
I want to do a backup from my automation (a simple batch .cmd)
I'm doing this command:
C:\Users\Administrator>wbadmin start backup -backuptarget:s:\backup -exclude:s: -allCritical -include:C:,R: -quiet
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
Retrieving volume information...
This will back up volume System Reserved (100.00 MB),New Volume(R:),DISK_S(S:) (Selected Files),Local Disk(C:) to s:\backup.
ERROR - The specified backup location could not be found or is not a supported backup storage location.
The only way to get this working, is working via UNC to the local drive S-drive
C:\Users\Administrator>wbadmin start backup -backuptarget:\\myserver\s$\backup -exclude:s: -allCritical -include:C:,R: -quiet
However, the backup succeeds with these warnings:
Retrieving volume information...
This will back up volume System Reserved (100.00 MB),New Volume(R:),DISK_S(S:) (Selected Files),Local Disk(C:) to
\\myserver\s$\backup
and giving a warning
The backup of volume DISK_S(S:) could not be completed. Error: The requested operation could not be completed due to a file system limitation
The backup operation completed with errors.
Looks like the wbadmin does not read the -exclude option?
Regards,
David -
I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKSHello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I am getting an iCould error message at PC startup: The procedure entry point_objc_init_image could not be found in the dynamic.....
i ahve same problem
Maybe you are looking for
-
Is there an enterprise version of Adobe Forms Central subscription that allows multiple users?
I have found many online form tools. Adobe is reputable so I am inclined to use it, however I can find little information. I need a forms system that stores results in the cloud for export. It must store more than 10,000 responses (how many does the
-
HT5019 Can I turn off my macbook Pro when using a Thunderbolt external display?
I have attached a Thunderbolt disply to my MacbookPro when not traveling. Is there a way to turno off the Macbook screen and only have the Thunderbolt running? Thanks!
-
IWeb 09 display issues in IE - HELP!
Hello all, Creating a very simple website for my wife (normadees.info). Not going through MobileMe. No blogs, no albums, one picture, two link nav menu. Everything looks OK in all browsers, except IE on PC. Display is awful, as if top of text is chop
-
ESS Business Package Configuration
Dear all, This is the first time i work with Business Packages. I downloaded and imported the ESS BP 4.6C - 4.7 into the SAP EP 6.0. I am using ECC 5.0 as backend. Could you please tell me the next steps i need to follow to configure the services. It
-
I have to make print cards for my job. Print cards being a 1 page version of the Larger package layout that the place I work manufactures. On this print card is a section for customer info on top, and the print representation on the bottom. What I've