The first day that I got my iphone 5s touch ID worked flawlessly. However, now it gets into these fits where it will say try again or unrecognized print. I have tried re-entering my fingerprint many times. Still doesn't work all the time though. Any help?
Starting to think I should take it to the apple store, however I want to see if anyone else has been having the same problem because so far touch id has been more annoying than useful.
I have the same issue, it works for a while then won't work hardly at all. Then start working again. I wish it would just work like it supposed too. I hear it has trouble with wet or clamy hands but mine are rarely like that. I do work outside with my hands and the are kind of tough and callused up. I wonder if that effects it some. Anyway let me know if you figure out how to make it work reliably
Cheers
Similar Messages
-
Hey, I've tried to install the new iOS 7.1 but it says that the installation cannot be completed and doesn't say why. I have more than 50% battery left but it still doesn't work, help?
It probably means you don't have enough available storage on your phone. It takes space to store the download - THEN unpack it. Best method is to use a computer with iTunes (This allows you to back up on your computer as well).
PLEASE: Do not purchase iCloud storage space - this will not give you more room for the iOS 7.1 installation. -
The + sign to add a new tab suddenly stopped working a while ago. I tried uninstalling and re-installing and it still doesn't work. What may have happened and how do I fix it?
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)" I have tried many many times and keep getting the same message. How do I resolve?
First take the steps recommended in this support article. If there's no change, continue as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Cookies/com.apple.appstore.cookies
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Hey guys I need help I am trying to get ios 7.0.4 on my iPod touch 5 gen but every time I try downloading it it says download faild and I've rebooted it reset it and cleared storage but it still doesn't work
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
- Then try on another computer -
my iphone wont find wifi anymore, in settings the wifi button is off and it won't turn on. tried resetting and erasing phone and it still doesn't work. ???
Follow all the steps in the article below:
http://support.apple.com/kb/ts1559
If the issue remains it would be best for you to back up your phone then book an appointment at an Apple Retail Store to be evaluated.
Hope this helps -
I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???
This sorted it for me:
Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up. -
I have downloaded my latest flash player and it still doesn't work, why?
I have downloaded my latest flash player and it still doesn't work, why?
Lightroom doesn't use the Camera Raw plug-in. All of the Camera Raw technology is part of the Lightroom program. You will either have to upgrade to Lightroom 5 or use the DNG converter to create digital negative copies that can be used with Lightroom 4.
-
I've upgraded to itunes 11.1.4 Now my ipod and my wife's will not connect/ sync. Itunes says it can detect an ipod but it can't be identified correctly. I have uninstalled and re installed ITunes but it still doesn't work
I too am having the same problem. I'm glad to know it's not just me
-
I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.
Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0 -
my iPod nano has stopped working. It is fully charged. I have tried to reboot and restore, and it still isn't working.
What do you mean it is not working? Does it power on? Is it recognized in iTunes? Need a bit more detail in order to assist you here.
B-rock -
When turning on my imac, it loads to a blue screen with a spinning wheel. It never gets passed that screen. I have tried power up to safe mode and it still doesn't work. I have music files saved on the computer and I don't want to lose any of my files. Can someone help me?
Zap the PRAM and Reset the SMC, and see if that fixes it. BTW. detailed computer and OS info goes a long way to solving problems.
-
I am a long time user of Macs. 20+ years.
This is my granddaughters 13" MacBook Pro we purchased for her in 2010 for college.
I have tried everything I know including firewire connection to my iMac while holding the T key, two different utilities CDs (will not open them) and held various key combinations as recommended while start up. Computer just beebs ever four seconds.
Battery is built-in but fully charged.
Any ideas?Hello,
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/HT1547 -
My ipod touch is "disabled" because I forgot my password and have tried to type it in too many times. I have not ever synced it to itunes or backed it up. Is there a way for me to back it up before I restore it back to its original state?
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New -
Executable Jar? - Googled for hours, tried many solns, still doesn't work!
I am fairly new to Java, and I'm just simply trying to create an executable jar that will run when I double-click on the icon.
I have created my very basic program that uses java swing on Netbeans. I have right-clicked on the project, selected properties, and checked the packaging section to make sure that it creates a jar file. I also selected compress jar file, which some tutorial told me to do as well. (I've also tried not checking compress jar file to see if it made a difference... it didn't).
I then went to folder options to make an association with the jar file to javaw.exe so that when I clicked on the icon, it would know to use javaw.exe to open it. When I double click on the jar file, it now just makes the error noise and nothing happens. Before I made the assocation, it would open up ultimatezip which would show me the original source code, the class file, and the manifest.mf file.
In any event, I'm just playing around with creating an executable jar file and any advice on how to make it so that the GUI launches when I double click on it would be extremely helpful.
Edited by: bigbamboo on Oct 13, 2009 8:41 AMbigbamboo wrote:
Thanks for your prompt response. I just tried your suggestions. 1 & 2 both worked for me. I have fiddled around some more with my file association and have looked at several sites that go through it step-by-step and I have tried them all. I went to tools, folder options, and I have changed the association to javaw.exe
I just can't figure out what's wrong.Good. So at least you know that it is the file type association that is not working correctly.
On my Windows PC, when I edit the open Action for .jar files, the command string is
"C:\Program Files\Java\jre6\bin\javaw.exe" -jar "%1" %*Maybe that will help. Of course, the path to your javaw.exe may be different.
Maybe you are looking for
-
Error while running BIP report, in one of our ST environments
we are getting this exception while running one of our BIP report(RTF template). the same code is working in the other ST environments NOTE: we observed some special cases if the report contain any Graph(chart) then this error is coming, with the pla
-
End of contract is near, what happens to my unlimited data plan
For past years I have upgraded my phone and signed a new contract, however since the last time I agreed to a contract Verizon did away with upgrading and keeping your unlimited data plan, so need-less-to-say I haven't upgraded. I have the Nation wide
-
Call alternating between earpiece and loudspeaker
I have a Sony Z1The last few days when i answer a call I will start the call using the ear speaker (phone held to ear) however after a while the phone begins to alternate between the ear speaker and the loudspeaker and eventually after about 15 secon
-
Hi All, can anyone tell me difference between the xml report and rdf report i know some difference 1) in the xml report we separate the data source with layout 2) we can generate EXCEL output 3) using single data source file we can build many layout
-
Hi I am implementing Marketing Online now. Could anybody tell me which API is called when creating a product from Marketing Online? Is Inventory API directly called? Thanks in Advance!