"The license agreement was not accepted. The application will now quit"

I downloaded Adobe Reader 8.1.2 with successful install on Vista. I keep getting the message box above from Adobe tho I "agreed" with license before download. Program won't start when I try to read a file. What do I need to do ? Thanks !

http://www.adobeforums.com/webx/.3bc424c7/

Similar Messages

Error: " The licence Agreement was not accepted. The application will now quit"

Hello friends,
My name is yan. I am adobe acrobat 8 profesional user. Last week, when i try to open up a pdf file, my acrobat suddenly not working at all. An error message occured " The licence agreement was not accepted. The application will now quit". I have been trying to uninstall and reinstall the application for fifth times. The same error occured while i try to open the acrobat.
So, for those who was facing this problem before...pls let me know. I really...really need your helps... Tq

See if one of these links helps
License not working for any CS3 product http://kb2.adobe.com/cps/405/kb405970.html
or http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528&sliceId=1
or http://www.adobe.com/support/downloads/detail.jsp?ftpID=3750
or http://www.adobe.com/support/contact/licensing.html
or http://forums.adobe.com/thread/542377?tstart=0
or http://forums.adobe.com/thread/483928?tstart=0

"The license agreement was not accepted"

We just bought Autocad 2007 LT and I suspect the ALM in 8.1 standard is conflicting with Autodesk's. The error message comes up every time and then the application quits. I'm a complete novice at this and don't have time to search every forum question for clues. Any suggestions?

Update on my post:
I did a maintenance check for errors on the main drive and lo and behold, I can now open pdfs. Perhaps you can try doing that and see what happens.
You can check for errors on your drive by opening "My Computer", and then right click on the main drive (usually "C"). Then, click on "Properties" and choose the "Tools" tab. The first option on that page will be "Error Checking". When you click on that, it will tell you that it will check for errors on the drive the next time you reboot or start the computer again. On my computer, it takes about 20 minutes to go through my whole drive, check for errors and repair them. Yours may take a lot less time if you have little in the computer.
I hope this will help you like it helped me, but I am certainly no expert. Good luck!
Hedda

Every time I download a PDF I get a message that says There was a RAISE without a handler. The application will now close. What does this mean?

I work on a Power Mac G5 running OSX 10.5.8.
We recently had to upgrade Java.
Now every time I download a PDF I get the message "There was a RAISE without a handler. The application will now close."
I downloads the PDF OK, but then Safari closes and I have to start it back up to get to my email.
What is the message telling me? It did not do this before we upgraded Java.

I'm having the same issue. Again, unfortunately. And of course you will find through various searches that it is a reoccurring issue, one that Adobe seems to have failed to acknowledge.
You can delete your preference files. Same thing. RAISE blah blah crash.
You can even go and do a restore from an uncorrupted backup from over 4 months ago, and yet it still doesn't solve the problem, thus there is a compatibility issue.
The program is battling with another program (of which there really is no telling) and therefore crashing the moment you open it. The software itself is clean and uncorrupted, yet somewhere deep within OSX there is a problem that won't allow the software to open.
The only temporary solution i've found to solve the problem is a clean adobe install. Just delete and uninstall all and any traces of Adobe Acrobat, then reinstall to find a working adobe product. For a small while, at least.
I've never tried creating a new account, but from what others say it works. Not worth my time though.
If anyone was wondering I have zero third party plugins. Its straight from Adobe CS4. Pro version.
Someone above mentioned using the drop down menu in acrobat to reset the software. I can't even do that! The "RAISE" window pops up before that actual software! Its ridiculous!
Its really quite peeving to know that this issue has been around for years and Adobe seems to just ignore it. I know I don't want to pay for a company that fails to meet their customers needs. This is your problem Adobe, not ours to deal with. Fix It.

There was a RAISE without a handler. The application will now exit/

Can someone help me figure this out, I can open Acrobat and run it for about 5 seconds, then this message pops up "There was a RAISE without a handler. The application will now exit." and Acrobat Pro closes.
I am running Mac OSX 10.5.8 and Acrobat Pro 9.3.3. I have tried going back to a previous version of Acrobat but I get the same error. I am using Firefox, someone suggested it is a Safari thing, but I have never used Safari, not sure why it would be associated anyway, but trying to give as much info as I can.
Help please?

I'm having the same issue. Again, unfortunately. And of course you will find through various searches that it is a reoccurring issue, one that Adobe seems to have failed to acknowledge.
You can delete your preference files. Same thing. RAISE blah blah crash.
You can even go and do a restore from an uncorrupted backup from over 4 months ago, and yet it still doesn't solve the problem, thus there is a compatibility issue.
The program is battling with another program (of which there really is no telling) and therefore crashing the moment you open it. The software itself is clean and uncorrupted, yet somewhere deep within OSX there is a problem that won't allow the software to open.
The only temporary solution i've found to solve the problem is a clean adobe install. Just delete and uninstall all and any traces of Adobe Acrobat, then reinstall to find a working adobe product. For a small while, at least.
I've never tried creating a new account, but from what others say it works. Not worth my time though.
If anyone was wondering I have zero third party plugins. Its straight from Adobe CS4. Pro version.
Someone above mentioned using the drop down menu in acrobat to reset the software. I can't even do that! The "RAISE" window pops up before that actual software! Its ridiculous!
Its really quite peeving to know that this issue has been around for years and Adobe seems to just ignore it. I know I don't want to pay for a company that fails to meet their customers needs. This is your problem Adobe, not ours to deal with. Fix It.

I have CS4 installed on two computers however none of the applications will now open on one machine and I get the error message 150:30

I have CS4 installed on two computers however none of the applications will now open on one machine and I get the error message 150:30

Your best bet is probably to start over by cleaning off the old software with the Adobe Cleaner tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then reinstall from your original media, or download it here:
http://www.adobe.com/downloads/other-downloads.edu.html

This Device is not Compatible with Creative Media Explorer, the application will now qu

The message pops up when the device is connected to the PC. Brand new Zen V 4Gb. M$ Windows XP?Tablet PC Edition 2005Version 2002Service Pack 2?WMP ?All latest greatest patches for the PC and the brand new Zen.

here try this, works for melink

When using Acrobat - Adobe Software License Agreement Pops Up - Accept doesn't seem to work - Application then automatically closes when existing the License Agreement pop up - Whats going on?

When using Acrobat - Adobe Software License Agreement Pops Up - Accept doesn't seem to work - Application then automatically closes when existing the License Agreement pop up - Whats going on?

Please try :
Software License Agreement reappears after you click Accept
Adobe's "accept license agreement" pops up way too much and ruins UX
Repeatedly asked to accept license agreement
Hope it helps you.
Regards
Rajshree

I have iOS7 on my iPhone4. I turned on the Voice Over option and now my phone is not working at all. At first it was freezing and not accepting any commands. Now all I have is a blank sceen. I can't get back into it. Any ideas what happened here?

I have iOS7 on my iPhone4. I turned on the Voice Over option and now my phone is not working at all. At first it was freezing and not accepting any commands. Now all I have is a blank sceen. I can't get back into it. Any ideas what happened here?

Hi Jeffny01,
If your iPhone is not responding, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Regards,
- Brenden

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem

I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP.

The techs wiped my computer and now I can not get iPhoto it tells me my computer can not accept this application. How do I get iPhoto so I can transfer my backed up photos

How do I get Iphoto. After resetting up my computer and trying ot manually transfer my iphoto library the app store says I can not accept this application on this computer. How can I get it back?

Contact the Techs and get them to sort out this account issue.
Regards
TD

I downloaded the i07. My id had changed a year ago and I forgot my password and my answer to the security question was not accepted. Tech support say nothing that can be done. I can no longer access my iphone. Any suggestions

I downloaded the i07. My id had changed a year ago and I forgot my password and my answer to the security question was not accepted. Tech support say nothing that can be done. I can no longer access my iphone. Any suggestions

I believe part of the recovery process is you get an e-mail allowing you to reset questions. If that e-mail isn't correct either because your son set it up then you really have no option but to ask Apple again. They are getting strict abotu security and given the number of "My iTunes account got hacked" posts here I can guess why. They have no way of knowing you really are the owner of the account. It's like me going to a policeman and saying, "See that car over there? That is mine, can you open the door for me?" and the police opening it on that basis alone.
Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37 --> Can I change the answers to the security questions for my Apple ID? --> Yes. You can change the answers to the security questions provided when you originally signed up for your Apple ID. Go to My Apple ID (http://appleid.apple.com/) and click Manage your account.
Forgotten security questions - https://discussions.apple.com/message/18402551 and https://discussions.apple.com/message/18625296
More involved forgotten question issues - https://discussions.apple.com/thread/3961813
Kappy 09/2012 post about security questions - https://discussions.apple.com/message/19569468
John Galt's tips (09&11/2012) - https://discussions.apple.com/message/19809294 and https://discussions.apple.com/message/20229239
If none of the above work, contact iTunes Support at http://www.apple.com/support/itunes/contact/ and follow the instructions to report the issue to the iTunes Store.

My iPhoto is not working, it quit unexpecly and it shows this message- The application "iPhoto" unexpectedly quit while trying to restore its windows. Do you want to try to restore its windows again?

i can't open my iPhoto, it was working very slow and now its not working at all, when i try to open it it shows this message: The application “iPhoto” unexpectedly quit while trying to restore its windows. Do you want to try to restore its windows again?
how can i fix this problem?

There are 9 different versions of iPhoto and they run on 10 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Parallels Desktop does not run - the application parallels desktop quit

Keep getting the popup error "The application Parallels Desktop quit unexpectedly" Ignore report or relaunch. I have reinstalled parallels numerous times to no avail. I have reported this issue numerous times to Mac over the last couple months and nothing yet.
Is the application conflicting with something or does it just not work. I have also went to the parallels website and got the latest version.
Any help or guidance greatly appreciated.

I had the same frustrating problem. I found the answer here and it worked perfectly!
First I ran the uninstaller from my original Parallels Desktop 3.0 for Mac cd and got rid of the application completely.
Then I went to http://forum.parallels.com/pda/index.php/t-22328.html and looked at the post for 8/13/2008 10:28 PM
It says:
Build is to old
Please download build 5608 following link bellow:
http://download.parallels.com/v3/en/GA/Parallels-Desktop-5608-Mac-en.dmg
and reinstall Parallels Desktop as described in kb
http://kb.parallels.com/en/4790
As per directions, I repaired the disk permissions.
Then as per the directions, I downloaded the build 5608 which is a Parallels Desktop 5608 application installer.
Lastly, you should know that I did NOT follow the directions for the terminal section. I was not comfortable messing around in there. I skipped it, ran the Parallels Desktop 5608 installer and I was up and running very quickly. Even though I skipped the terminal step, it works perfectly. I think it's because the uninstaller had already deleted the files that were referred to in the terminal directions.
J.A.L.

I successfully installed Adobe Digital Edition but the application will not open

I installed Adobe Digital Edition for Windows on a Windows 7 PC. It successfully installed, but the application will not open. I double click on the icon and it gives the borders, but never opens. I have waited 30 minutes and still nothing.

It is on Windows 8.
From: shreya <[email protected]>
To: Marilyn Kelly <[email protected]>
Sent: Thursday, March 26, 2015 1:06 AM
Subject: I see Adobe Digital Editions on desktop but when I click on it it will not open. I have uninstalled and re-installed Adobe Digital Editions but it still will not work. I used it a few days ago and it worked but won't now.
I see Adobe Digital Editions on desktop but when I click on it it will not open. I have uninstalled and re-installed Adobe Digital Editions but it still will not work. I used it a few days ago and it worked but won't now.
created by shreya in Adobe Digital Editions - View the full discussionYou are facing this problem on Windows or Mac ? and which version? Please let us know. Thanks If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7351396#7351396 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7351396#7351396 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Digital Editions by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

"The license agreement was not accepted. The application will now quit"

Similar Messages

Maybe you are looking for