The mecanism of reading an aggregation

Dear experts,
I have a question regarding as the aggregation.
In which case the OLAP will read the aggregation when a query is launched?
If the aggregation is active but isn't filled with data yet, the OLAP will read the infoprovider or display no data?
What I met here is the system display no data when the aggregation is active but empty.

Hi,
Check whether the Infoprovider has data for your selections given for the query.
If the Aggregates are not filled OLAP will fetch the data from the Infoprovider only, but perfomacne goes down.
There could be some other problem that is why it is showing No Applicable data.
Check your selection critieria.
Veerendra.

Similar Messages

  • Error : Reading from Aggregation Level not permitted

    Hello Gurus,
          Could somebody please give some help or advice regarding this?
    I have a multiprovider on a regular cube and an aggregation level, for some reason the multicube gives me the following error message when I try to display data using listcube.
    Reading from Aggregation Level is not permitted
    Message no. RSPLS801
    Also the  Query on the multicube does not display data for any of the KF's in the Agg Level but when I create a query on the Agg level itself it is fine.
    Any suggestions?
    Thanks.
    Swaroop.
    Edited by: Swaroop Chandra on Dec 10, 2009 7:29 PM

    Hi,
    transaction LISTCUBE does not support all InfoProviders, e.g. aggregation level are not supported. LISTCUBE is a 'low level' to read data from the BW persistence layer, e.g. InfoCubes. Since aggregation level always read transaction data via the so called planning buffer and the planning buffer technically is a special OLAP query LISTCUBE does not support aggregation level.
    Regards,
    Gregor

  • MORE THAN 1 OF THE DETAIL FOLDERS USES NON-AGGREGATED ITEMS

    What does this join configuration message mean? I am a user not an administrator but I notice that sometimes I get this message when I am trying to create reports in Discoverer.
    Currently I have a report that is using a control table and a detail table. I need to link to another table (not a detail table). The join did not exist but I was able to take a transaction and join to the table with sql. I asked that this join be created in Discoverer so I can link to the other table in the report and it was created, but when I go to pull in the field I need I get this message:
    Join configuration cannot be resolved. Reason: more than 1 of the detail folders uses non-aggregated items.
    Can this be resolved and if so how? We seem to get this message fairly often.

    I am always leery of disabling fan traps, as it can cause errors with aggregation (and by errors, I mean including values multiple times). Make sure you check the documentation (the Disco user guide) for an explanation of fan traps, and the types of problems that can occur, and the check the results of your queries (or have the data owners do it) to make sure the results are valid.
    I use the fan trap warning as an indication that there is something amiss in the BA, and then try to find the problem there. Sometimes the solution is changing a join (you can check the box that states there is a 1 to 1 relationship and that will also eliminate the fan traps), other times it is creating a view or custom/complex folder to specify how the data is to be joined. Rarely is the only solution to disable fan traps (and while I am on my soapbox, I'll add that I use it as a last resort).
    Sometimes removing fan traps is the correct solution, but you need to test your reports to make certain the results are valid.

  • What is the Difference between Consolidation and Aggregation

    Hi Masters
    What is the difference between Consolidation and Aggregation? i think both are same, what is the exact difference in-terms of HFM and Essbase?
    regards
    Taruni

    The differences lies in the mechanism used to calculate and store the value. Dynamic members such as parent accounts or customs, derived views, parent periods, or <Total> members in the value dimension are performed on the fly in the HFM app server's memory without any discrete action on the user or adminisrator's part. These are aggregations in this context, and are distinct from amounts that are calculated and then stored in the HFM database which are either the result of direct data entry (from data loads or journals) or calculated amounts resulting from HFM's rules. "Consolidation" in your question would be one of the stored, calculated amounts in HFM.
    --Chris                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Cant open PDF files..It says the adobe acrobat reader that is running can not be used to view files in a browser..plz suggest the solution.thanks

    Whenever i try to open a PDF file it says " The adobe/acrobar reader that is running can not be used to view files in a web browser. Plz exit adobe/acrobat readerand exit your web browser and try again." Wt do i need to do, plz suggest.
    Regards
    Aditya Bhargava

    Hi adityabhargava01-
    My first suggestion is to upgrade to the most recent version of Firefox by going to this link:
    http://www.mozilla.org/en-US/firefox/new/
    My second suggestion is to read this article on how to many your preferences on how Firefox deals with PDFs and all other file types:
    [[Options window - Applications panel]]
    I hope that helps!

  • How do I reset the furthest page read in iBooks from an HTML Widget?

    Our training department just got a bunch of iPads and I'm writing some custom HTML widgets for iBooks for them for testing, in-class activities, etc.
    On the last page I have a link to clear all the forms and return to the first page.  Like this: <a href="ibooks:///#page(1)">Click here</a>
    That all works fine but the next time the book is opened it auto-syncs to the FURTHEST page read (the last page with the test on it) instead of the LAST page read (the first page- from the link mentioned above).
    Basically we want the link to reset the furthest page read to the first page of the book when they finish the test so that the next person to use the iPad goes to page one automatically.
    Does anyone have an idea of how to do something like completely clear the iBook cache?
    Much obliged!

    This was hand-coded HTML, CSS, jQuery/Javascript with a PHP file on our server that processes answers and emails them to our training director.
    I use Brackets exclusively for coding.
    Hope this helps you.

  • HT2443 loops are in the browser when you the loop message reads this file type is not supported

    loops are in the browser when you the loop message reads this file type is not supported

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • I am using the Adobe Acrobat Reader on a mac and I followed all the directions to copy an image but when I press paste only half of the image appears or it appears as an empty square. What can I do to fix this?

    I am using the Adobe Acrobat Reader on a mac and I followed all the directions to copy an image but when I press paste only half of the image appears or it appears as an empty square. What can I do to fix this?

    Hello,
    I would like to inform you that not all the browsers and online PDF readers support copying text from a PDF. If you have opened the PDF online, please download PDF file to your computer and then open the file in Adobe Reader.
    Please share a screenshot if the issue still persists.
    Regards,
    Nakul

  • I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file re

    I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file readers as well, and for some reason they won't work either. I have 5 computers running top end processors and RAM. By this I mean I have one, this one which I am using that has an AMD Phenom Black 3.2 Quad-core with 8 GBs of Corsair top DDR2 RAM, my other two AMD have either an Athlon II triple core with 4 GBs of DDR2 Corsair RAM, one with the Phenom X4 965 3.4 GHz Quad-core with 8 GBs of their best DDR2 RAM, and two Intels with the i7 920 Processors using the triple channel 1366 socket processors and one with 8 GBs of low latency DDR3 RAM and the other with 4 GBs of the same RAM. I am getting the message on this one, which has a fresh install of XP Pro X64 operating system, as do the other 4 as well. I have run Avast Business Pro Anti-virus on this one, which I am getting the message on with a single result which I deleted, and also both Spybot Search and Destroy, which came back clean as well as Malwarebytes Antimalware, which got a lot of tracing cookies now removed, and SuperAntiSpware which also found a few cookies also now deleted. Can you tell me what I need to do to get these files to show as .pdf files rather than as a clean blank page. One other issue is that I wish to know how to turn off my downloads so they are saved and Mozilla will give me the option of returning them instead of me losing them all together as it does now. Thanks for your assistance. If there is another Adobe reader I should download and install, could you provide me with the link to it? I appreciate your assistance here
    == When I download and try to read a .pdf file and when I am asked to turn off all Firefox files and if I do, I lose them since I need to know how to save them without rebooting my computer.

    Brilliant! Problem solved! Thanks so much.

  • When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close.  Sorry for the convenience."  When I click to see the error, it reads "AppName: itunes.exe      AppVer: 10.5.2.11      ModName: msvcr80.dll"  Why ?

      When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close.  Sorry for the convenience."  When I click to see the error, it reads "AppName: itunes.exe  AppVer: 10.5.2.11  ModName: msvcr80.dll"  Why ?  I am overly frustrated.  Please help.  Not exactly sure which operating system I have.  It is a dell laptop with xp.
    AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
    ModVer: 8.0.50727.6195 Offset: 00026b72
       AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
    ModVer: 8.0.50727.6195 Offset: 00026b72

    Well I was able to successfully revert back to iTunes8. Here's my steps:
    1. In Add/Remove Programs I deleted all Apple products (iTunes, QuickTime, Safari, Bonjour, etc.)
    2. I then check C:\Program Files\ and made sure all folders were deleted (QuickTime, etc.)
    3. I then ran a Registry Cleaner program to make sure all entries from Apple products were removed.
    4. I then rebooted my PC
    5. I then downloaded iTunes8.0.2 from here: http://www.apple.com/downloads/macosx/apple/ipod_itunes/itunes802forwindows.html
    6. After it installed it said it could use my iTunes library file because it was created with a newer version. So I re-created my library by following these steps: http://support.apple.com/kb/HT1451
    It took some time but iTunes is now back up and running. And I have all my playlists, etc. I haven't tried to sync anything yet. I'm just thrilled to have my iTunes back!

  • I am in the process of expanding a database of chemistry journal articles.  These materials are ideally acquired in two formats when both are available-- PDF and HTML.  To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

    I am in the process of expanding a database of chemistry journal articles.  These materials are ideally acquired in two formats when both are available-- PDF and HTML.  To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read.  Both formats are, of course, readily recognized and indexed by Spotlight.  Journal articles have two essential components with regards to a database:  the topical content of the article itself, and the cited references to other scientific literature.  While a PDF merely lists these references, the HTML version has, in addition, links to the cited items.  Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight.  Embedded URL's are, of course, ignored by Spotlight.  As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them.  Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
      In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight.  This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items"  (along with "Get URLs From Web Pages") give unsatisfactory results.  When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step.  A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed.  Is there a way for Automator to do this?

    Hi,
    With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
    That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
    "I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson  EMP-TW2000 projector. This projector is HD compatible.
    To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
    I prefer option 2, so my question is: which would be the preferred export preset?
    Project specs:
                        - 1920x1080 sq pix  (16:9)
                        - 25 fps
                        - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
    To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video  (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
    So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
    I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
    Please give it a look.
    Thanks,
    Jef

  • In the privacy policy, it states that percentages and durations of books read are being collected to ensure that publishers can have a metered price model, prices depending on how the book was read. Give me an example of a company with such a price model?

    In your privacy policy, you state that the percentages and durations of books read are being collected to ensure that publishers can choose a metered price model. Prices which depends on the duration for which the book was read.
    Give me an example of a company with such a price model? Are the information being collected even where the companies have not asked for the information, even when the metered price models are not being used?
    Here is an extract från the privacy policy:
    What information does Adobe Digital Editions collect and how is it used?
    The following information may be collected when an eBook with DRM is opened in Adobe Digital Editions software. If an eBook does not have any DRM associated with it, then no information is collected.
    User GUID: The User GUID is a unique value assigned in place of your User ID and is used to authenticate you.
    Device GUID: The Device GUID is a unique value generated to identify your device. It is used to ensure that the eBook may be viewed on your device and that the number of devices permitted by the license is not exceeded.
    Certified App ID: This ID represents the application that is being used to view the eBook, in this case Adobe Digital Editions. It is necessary to ensure that only a certified application may display an eBook. This helps to minimize piracy and theft of eBooks.
    Device IP (Internet Protocol): This identifies the country you are located in when you purchase an eBook.  It is used by eBook providers for the enablement of localized pricing models. Only the country identifier of the Device IP is stored.
    Duration for Which the Book was Read: This information may be collected to facilitate limited or metered pricing models entered into between eBook providers, such as publishers and distributors. These models are based on how long a reader has read an eBook. For example, you may borrow an eBook for a period of 30 days. While some publishers and distributors may charge libraries and resellers for 30 days from the date of the download, others may follow a metered pricing model and charge them for the actual time you read the eBook.
    Percentage of the eBook Read: The percentage of the eBook read may be collected to allow eBook providers such as publishers to implement subscription pricing models where they charge based on the percentage of the eBook read.
    Information provided by eBook providers relating to the eBook you have purchased: The following information is provided by the eBook provider to enable the delivery of the eBook to your device:Date of eBook purchase/download
    Distributor ID and Adobe Content Server Operator URL
    Metadata of the eBook, such as title, author, language, publisher list price, ISBN number
    How is the information transmitted?
    The data is sent periodically to Adobe via a secure transmission using HTTPS.
    How is the information used?
    Adobe uses the information collected about the eBook you have opened in Adobe Digital Editions software to ensure it is being viewed in accordance with the type of DRM license that accompanies that eBook. The type of license is determined by the eBook provider. For more information on how each piece of data is used, please see above.

    In your privacy policy, you state that the percentages and durations of books read are being collected to ensure that publishers can choose a metered price model. Prices which depends on the duration for which the book was read.
    Give me an example of a company with such a price model? Are the information being collected even where the companies have not asked for the information, even when the metered price models are not being used?
    Here is an extract från the privacy policy:
    What information does Adobe Digital Editions collect and how is it used?
    The following information may be collected when an eBook with DRM is opened in Adobe Digital Editions software. If an eBook does not have any DRM associated with it, then no information is collected.
    User GUID: The User GUID is a unique value assigned in place of your User ID and is used to authenticate you.
    Device GUID: The Device GUID is a unique value generated to identify your device. It is used to ensure that the eBook may be viewed on your device and that the number of devices permitted by the license is not exceeded.
    Certified App ID: This ID represents the application that is being used to view the eBook, in this case Adobe Digital Editions. It is necessary to ensure that only a certified application may display an eBook. This helps to minimize piracy and theft of eBooks.
    Device IP (Internet Protocol): This identifies the country you are located in when you purchase an eBook.  It is used by eBook providers for the enablement of localized pricing models. Only the country identifier of the Device IP is stored.
    Duration for Which the Book was Read: This information may be collected to facilitate limited or metered pricing models entered into between eBook providers, such as publishers and distributors. These models are based on how long a reader has read an eBook. For example, you may borrow an eBook for a period of 30 days. While some publishers and distributors may charge libraries and resellers for 30 days from the date of the download, others may follow a metered pricing model and charge them for the actual time you read the eBook.
    Percentage of the eBook Read: The percentage of the eBook read may be collected to allow eBook providers such as publishers to implement subscription pricing models where they charge based on the percentage of the eBook read.
    Information provided by eBook providers relating to the eBook you have purchased: The following information is provided by the eBook provider to enable the delivery of the eBook to your device:Date of eBook purchase/download
    Distributor ID and Adobe Content Server Operator URL
    Metadata of the eBook, such as title, author, language, publisher list price, ISBN number
    How is the information transmitted?
    The data is sent periodically to Adobe via a secure transmission using HTTPS.
    How is the information used?
    Adobe uses the information collected about the eBook you have opened in Adobe Digital Editions software to ensure it is being viewed in accordance with the type of DRM license that accompanies that eBook. The type of license is determined by the eBook provider. For more information on how each piece of data is used, please see above.

  • I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one?

    I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.

    This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
    I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked  OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks!

  • Everytime firefox updates I loose my Blue Mountain access. the pop-up reads Create & print plug-in could not install because it is not compatable with firefox 4.0.1

    went to use create & print in bluemountain got "In order to use create & print in Mozilla you must download and install latest version. Do you want to install plug-in?" (clicked OK). Next message was "Firefox prevented this site (www.bluemountain.com) from asking you to install software on your computer" (clicked Allow) Next message "Create & Pring plugin could not install because it is not compatible with firefox 4.0.1" -- this sound like a firefox problem not bluemountain. Please help... I am paying to use bluemountain and firefox is not letting me get my $$$$ worth out of that site.

    Launch Disk Utility in /Utilities. Then, click on the volumes under the top-level disk. The one that has this listed on the bottom is the boot volume.

  • Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd.    Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart.  Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows u

    Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd. 
    Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart.  Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows up on the desktop where I can then eject it.
    I have checked and double checked the finder prefs and all looks normal showing a check mark on CDs,DVDs etc. (the ones I want to show up on the desktop)
    I have reset the PEAM, repaired permissions with both the disk utility on the computer and the disk utility when I start up in the Recovery Disk.  I did notice that sometimes the permission repeat the same correction several times before it moves on, and sometimes it doesn’t. I have Windows installed on a partition but I keep it unmounted until it is needed for my wife’s work.  The dock seems to be just fine and all the apps seems to run just fine.  When I insert a photo CD iPhoto does not open but when I insert a music CD iTunes does open. 
    Also, most every time I open iPhoto it takes a long time(sometimes as long as 2 minutes) for it to load.
    Sometimes my Mail (Mail 5.3) does not post new mail but most of the time it does. 
    Once and a while it seems like the computer slows way down but then it seems ok ten minutes later.
    All  of these ‘things’ seemed to have happen suddenly and I have not downloaded anything from the internet in some time.
    Of course the warranty and extended warranty are both no longer in effect having had this computer for more than three years.
    I am running Java and Adobe Player because some of the sites I go to a lot require both.

    I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
    http://www.crucial.com/store/drammemory.aspx
    I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
    I hope you'll post here with your results!

Maybe you are looking for