The numbers 1234 is part of my pw and those numbers won't work! So I can't get in my laptop but the other numbers woek
My laptop was working just fine this morning and I was just updating my computer for the osx new update and now those numbers don't work and idk how to get the onscreen laptop
It is possible, but you had better call Verizon Financial Services to let them know what you intend to do. Unless you do so, you have the possibility of having your service cut off and having to pay a reconnect fee on each line.
Verizon Financial Services can be reached at the following #'s
866-266-1445 or 800-754-0961
Another thread on the subject can be found here...
Similar Messages
-
I put my card num in here so I could buy sum things wen I didn't have the money but I don't have any money on my card so I went n bought a $25 card n now it won't work cyz I can't get my 1 card num off here it won't let me.. How do I get that card num off!!
i the top right corner of the iTunes store click on your account, log in and go to billing info. Hope this helps
-
My "Weather" on the dashboard no long works. I have deleted it and added it anew and it still does not work. How can I get it back?
You must get 10.6 if they still have it, install it & update to 10.6.8 so you have the App Store to buy & download the huge 10.8 Installer.(10.9/Mavericks is the only download avaiable now without specially calling Apple).
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA -
the material of all apple charges are awful and start to disintegrate. They are very expensive to replace. Great product but the charger and USB cords are awful my Mac book charger he rubber like material starts to break apart exposing your wires.
Yes Apple knows this and will replace, take both machine and charger in.
https://support.apple.com/kb/ts4127 -
Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks
Yeah, it´s happening in normal 3g coverage area, in fact, i used the 3g to download the iOS but after installing it, the phone doesn't get the 3g anymore.
I tryed the reboot pocess, but it didn't fix it
I haven't tryed the restore to factory settings process,
Is there a way to downgrade to iOS 5.1 again?
Thaks -
I just downloaded the ios 6 on my iTouch 4th gen, and my email won't work, my wifi won't connect, my iPod is more sluggish, and honestly I'm really frustrated. Is there anything I can do?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Downgrading the iOS is not supported by Apple. -
My iPhone 4S ios5 has suddenly stopped letting me connect to any wifi. The wifi line in settings has gone grey, reads 'no wifi' and does not respond to touch. How do I get reconnected?
HI there,
You may want take a look at some of the troubleshooting steps found in the article below.
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Hope that helps,
Griff W. -
HOW wireless works? I can`t get conected to ANYWHERE WITH THE IPOD TOUCH
I do not know how get into itunes with the ipod touch, or you tube or anywhere. Safari only displays can`t get conected to the server. I have a wireless at home Belkin 54b and i connect 1 PSP,2 Wii, 2 laptops, 1Xbox 360, 2 Nintendo DS and they all work.
I have put in all the wireless information and I have the wirelss signal, but all I get when I try to click on safari or itunes is a error message. The message is can not connect to server. I have 2 laptops and a wireless printer connected and they all work fine. What could be the problem.
-
HOW can I get a GOOD copy of the iTunes software for my desktop?
I solved MY corrupt firmware file problem!
A little background- I deleted all Apple, iPod, and QuickTime software from my desktop PC and reloaded iTunes for the (I don't know how many) time. Same thing! Downloaded it again and used the "erase iTunes" option then reloaded again and had the same result. I then cranked up my old laptop and when I got to the Apple website, I was offered an opportunity to download QuickTime and took it. It came with iTunes if I wanted, so I took that too. After the download, I plugged in the Nano and it restored to Windows format. I did not want it to sync to the laptop, so I took it to the desktop and was able to sync with Nano and downloaded my tunes. TALK ABOUT HOKEY!
WHY does the restore program have to be resident on MY PC or MAC anyway? Seems like I could just as simply download a current copy from Apple every time I want to restore.
WHY doesn't Apple do something about this problem and let users know about the solution? Do they not want to grab a share of the Windows business? Here is an excellent opportunity!
Now for my question.
HOW can I get a GOOD copy of the iTunes software for my desktop? I now know it works! Is there a hidden file or folder I should delete before I make my next attempt to cleanup and download? Why isn't this information public?
I spent over 30 years in the DP industry. PC is not my area of expertise, but this must be the most frustrating experience of my years.
desktop Windows XPI THINK I have solved the problem. Can't be 100% because I don't want to try a restore. At least the Apple home page lites up correctly with quicktime now. It hadn't in the past.
Thank you for your assistance. - LRB
desktop Windows XP -
Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.
Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh -
After I downloaded the new version of iTunes 11.0.1 and i try to open it it says: ''There is no application set to open the document ''iTunes 11.0.1.dmg.part''. How can i install this without paying for an app to do it? What apps can i download to do this type of work.
.dmg.part is not a complete file.. It usually indicates that the entire file has not been downloaded yet. Are you sure you downloaded the entire file? (i recommend updating itunes through > Software Update
Alternatively, you can download it from here: http://support.apple.com/kb/DL1614 -
How can I get my IMac to recognise the scanner part of the HP printer/scanner? It prints!
How can I get my iMac to recognise the scanner part of the HP printer/scanner? It prints!@
I had a similar problem right after the first update to 10.6.7, which happened to quite a few people. It took a couple of software updates and then an HP printer update to fix it. So make sure that all your software updates are up to date. Mine is an older printer: C6280 All-in-one but scans fine now that my mac recoginises it. You might want to check on the HP site also.
It was really frustrating because it had worked fine before.
laverne's mom
Message was edited by: laverne's mom -
my iphone fall in the sea and now it's not working how i can take off my photo and numbers ? and do u thing it will be work or what plz help me !!!!!!!!!!!!!!!
Sea water and electronics don't mix. The salinity fries the internal circuitry of the phone. Your phone is toast.
Certainly the user of any device which can be lost, stolen, or dropped in the sea would be smart enough to have had the data backed up, rght? Your photos and numbers should be safely backed up on your computer or in the cloud.
If you didn't do this, there's no way to recover those data now. Backups are meant to be done BEFORE disaster strikes, not after. -
Between the 2 fusion drives , 1 is 1tb 5400RPM and 1 is 1tb 7200RPM, will you see much difference in speed as I understand the speed comes from the ssd part..?
Will it not be noticeable?It would not be as noticable as one would think. The speed of the OS will come from the SSD portion of the drive. The SATA portion is mostly used for data storage which the drive only has to access as needed, not constantly. So over all, there is a bit of a difference but not enough to make a big impact.
-
How can you get an applet to obey the CSS z-index attribute?
How can you get an applet to obey the CSS z-index attribute?
I have a DHMTL page with a panel that I want to slide back and forth. But another part of the requirement is to have the panel look like it is sliding under another panel.
The problem is that an applet is on the panel that slides. When the sliding panel move under the stationary panel the applet does not go under the stationary panel, but the reset of the sliding panel does render looking like it is sliding under.
See below.
- ~~~~~~~~~~~~~~~~~~~~~~~~ ^^^^^^^^^^^^^^^^^^^^^^^^^^^ -
- ~ ~ ^ ^ -
- ~ ~ ^ ^ -
- ~ #############*************** ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ #############^************** ^ -
- ~ ~ ^ ^ -
- ~ ~ ^ ^ -
- ~ ~ ^ ^ -
- ~~~~~~~~~~~~~~~~~~~~~~~~ ^^^^^^^^^^^^^^^^^^^^^^^^^^^ -
~ has a z-index of 1
# and * have a z-index 2
# shows above ~ and below ^
^ has a z-index of 3What I am getting with the applet on the panel with a z-index of 2 is the following
- ~~~~~~~~~~~~~~~~~~~~~~~~ ^^^^^^^^^^^^^^^^^^^^^^^^^^^ -
- ~ ~ ^ ^ -
- ~ ~ ^ ^ -
- ~ #############*************** ^ -
- ~ # ^ * ^ -
- ~ # @@@@@@@@@@@@@@@@@@@@ * ^ -
- ~ # @ @ * ^ -
- ~ # @ @ * ^ -
- ~ # @ @ * ^ -
- ~ # @ @ * ^ -
- ~ # @ @ * ^ -
- ~ # @ @ * ^ -
- ~ # @@@@@@@@@@@@@@@@@@@@ * ^ -
- ~ # ^ * ^ -
- ~ # ^ * ^ -
- ~ #############^************** ^ -
- ~ ~ ^ ^ -
- ~ ~ ^ ^ -
- ~ ~ ^ ^ -
- ~~~~~~~~~~~~~~~~~~~~~~~~ ^^^^^^^^^^^^^^^^^^^^^^^^^^^ -
--------------------------------------------------------Where @ is the applet. Notice how the applet is on top of the ^ but the panel under it, ^, is under like it should be. All the panels are 1x1 tables with a border. So how can I get the applet on the drawing shown with # and * to follow the rendering of the z-index of 2?Hi,
I have the same problem, and don't know how to solve it, So, i had tried to put my applet in a div tag wih z-index=0, but it still hide my other Dhtml divs with bigger Z-index (z-index =1000)
Have you any idea to solve this.
Thanks
Hakim
Maybe you are looking for
-
Sharing FAT-32 External HDD across network with a PC?
I have an External Driver that is formated as a FAT-32. I have it connected to my Mac. Would it be possible to share this driver across the network (not a wireless network) so that my PC can see the drive?
-
How do I save a spreadsheet in the cloud, for access by iPhone?
The subject says it all.
-
Does anyone have any suggestions about the best LiveType tutorial and/or literature regarding this application. I'm having a hard time moving through the help guide provided with the software by Apple. Thanks! Jim
-
Help with making a interest program
hi i am trying to make a program that calculates simple and compound interest.... I KNOW I HAVENT done the compound part yeat but im having problems compiling the simple interest part.. please help.. here is the code : import java.util.Scanner; publi
-
Hi All, Suddenly i am getting this error In JCo application type connections com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'password' missing How to resolve this error? Regards, Phanikumar