The %5BOut%5D gets Stuck to Parameter name in Additional Results

The in or out tag from a LV VI gets added to the parameter name
any method to remve it

%5B = [
[In]
[Out]

Similar Messages

Why does the ipod "restore" get stuck ???

everything was working fine until I updated iTunes to version 7.5
now when I start iTunes and attach my iPod, it tells me I need to do a restore
so I do and it never gets to the point where it copies the songs from iTunes to the iPod ???
i am going around in circle (and getting dizzy)...any suggestions, folks ?

Hey iPod touch users 101, Have you done trouble shooting 101? (couldn't resist, the 101 thing just screaming to be done, anyway...) Most often the little switch inside the headphone port gets stuck open, so your iPod thinks the headphone jack is still pulled in. Try looking the port with your iPod turned off, do you see anything, pocket lint is most often the culprit. If you see something attempted to blow it out, or use a probe to carefully remove the foreign debris. If that does not work, or you do not see anything, try quickly plugging / unplugging the headphone jack several times about 12 times, free the switch, if contacts are corroded this action should clean them. Check for foreign debris again, may need to repeat this action. Hopefully this solves your issue. You can also try resetting, press and hold the power and home buttons together until the Apple logo appears then release both buttons, or go into Settings>General>Reset, then tap Reset All Settings, but I think from what you have described you problem is hardware not software. If problem continues, contact your Apple store or the Apple Genius Bar, and set up an appointment to have your iPod evaluated. Good luck, Cheers.

On doing a full Restore on my iMac from A time capsule, I am getting a permanent white apple screen with permanent loading wheel. This is my second attempt to restore with the same outcome. Seems like the last stage of the restore is getting stuck. Any ti

On doing a full Restore on my iMac from A time capsule, I am getting a permanent white apple screen with permanent loading wheel. This is my second attempt to restore with the same outcome. Seems like the last stage of the restore is getting stuck. Any tips on how to sort this out please.
iMac, Mac OS X (10.7.3)

It just means some spammer is using your email address as the sender address for their spam. This is very easy to do - anyone can do it simply by changing the From email address in their email program. It does not mean your account was hacked or you have a virus (there are no current Mac viruses on the loose anyway, nor has there been for years).
There's nothing you can do about it. It can happen to anyone and the spammers will move on to using someone else's email address before long.

The Downloads keep getting stuck in the Browser download section

Even when they're completed it tells me "a few seconds remaining" yet I can find it in my PC. The download's Complete as in 5MB/5MB But it doesn't get off the Library and some times It Disappears from its destination(very Rarely). It's just that the downloads getting stuck in the Download Library and then the download starting again every time I start Firefox Again(I cant cancel the download it Just Pauses) sucks.

hello, this is a bug in the latest 32 beta 9 version which will be addressed in the release candidate 1 build which should be deployed via auto-updates to beta users later today.
a workaround for the moment would be to enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up), right-click somewhere on the page and create a new string setting with the name '''browser.safebrowsing.appRepURL''' and value '''https://sb-ssl.google<i></i>.com/safebrowsing/clientreport/download?key=%GOOGLE_API_KEY%'''
for reference see [https://bugzilla.mozilla.org/show_bug.cgi?id=1057764 bug #1057764] (please don't post in bug reports, but vote for the bug if you want to see it fixed)

HT1560 If diagnostics says appletv is working properly, why does the install keep getting stuck on pairing with the computer then back to select resolution over and over.

First gen Appletv suddenly stopped working from one night to the next. This has happened in the past once and the usual restore, reboot, etc, tinkering finally snapped it back into working quite unexpectadly. The symptom is, after restore when it gets to the screen to pair with itunes by entering the numbers in itunes, the number is briefly up on the tv screen and then quickly is gone returning to the select resolution page. This happens over and over with each try while the Appletv never shows up in itunes and the number box never appears either to pair the computer with the Appletv. It does the same thing with my intel macbook so I don't think it's the Imac. I have dumped itunes 10 and reloaded itunes 9 with no change in the problem. My IP scanner picks up that the Appletv is on our network as soon as it turns on. I have used wireless, which it finds and logs into, and ethernet which also has it finding my network. I can't test whether it is actually on the network by trying to play a trailer or something because it will not go past that pairing screen in the initial setup. Are the built in diagnostics reliable when they say your appletv is working correctly. The hard drive isn't making any exceptionally loud noise as it spins up. I am stuck with this unit because I use it with a G4 Imac running Tiger 10.4 for a video/audio jukebox at the bar. New ATV won't work with the Imac unless it's running leopard I believe. The thing runs like molasses already so attempting leopard which I don't have anyway would really make it crawl. I love a good mystery/problem but this thing is driving me crazy. If I just could know for sure what component inside was shot I would replace it. Could a hard drive boot up to a degree and then get stuck at one part of the install, or would it have to be the logic board, or something else. Bad juju in the house or something

Had same problem this finally stopped it for me.
FINDER
APPLICATIONS
UTILITIES
DISK UTILITY.app
select your main hardrive
REPAIR DISK PERMISSIONS
Message said repairing estimated time 1minute, yeah okay we all know how accurate those are process took about 5 minutes with nothing showing then all of a sudden printer permission repaired notations were flying onto screen in actions box. Do restart for heck of it sign on and so far no message has apeared where it did regularly. I hope this is indeed the fix. In meantime it never hurts to fix permissions so give it a try.
George in NY

I was trying to use the Matlabscripting VI, but it says it is for instructional purpose and not for research and the system is getting stuck.When I used it two days back it worked.Could U plz tell me what the problem is??

I have Labview 7.0 and Matlab 6.5 installed on all the computers at my School. When I tried to use the Matllab Scripting Window for the first time, it worked, but after two days when I was trying to run the program, there was a meesage saying that the License is for instructional Purpose only and not for Research or commercial use and the Labview is getting totally stuck. I need the Matlab Scripting VI for my Project,could anyone suggest what I shd do or is there any other method by which I could do that.

Hello Medha,
Thank you for contacting National Instruments.
From the information you have provided, I am not sure what is causing your problem. Make sure that you do not have an evaluation license for LabVIEW.
What, if anything, was changed in your VI before it stopped working? Will it run without the Matlab script?
If you continue having trouble getting your VI to work, please respond with more information. If you like, you can post your VI (along with any necessary sub-VIs) and I will take a look at it.
Have a great day,
Sean C.
Applications Engineer
National Instruments

When I open new tabs, their names will get stuck at whatever name they are first given and will not change as I navigate within them. For example, a tab will stay named "New Tab" or "Connecting..." Any advice/solutions to fix this behavior?

My problem is as the title suggests.
When I open a new tab, the title displayed on the tab will stay stuck at whatever the tab is first titled after it is opened- usually "New Tab" or "Connecting..."
The names will stay stuck at those names even if I navigate within the tabs to different pages or refresh the tabs/pages.

I only had to disable TabRenaminizer, and everything is working just fine now. Thanks a bunch!

The current search engine in the search box gets 'stuck' in beta 11.

I have various search engines set up to use with my search box. Since beta 11 it occasionally gets 'stuck' on a search engine if I change.
i.e. if I change from Google to IMDB, I can get stuck on IMDB and am no longer able to go back to Google (or any other engine).
Wasn't a problem in earlier betas.
Error console displays this:
Error: uncaught exception: [Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIBrowserSearchService.currentEngine]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chrome://browser/content/search/search.xml :: set_currentEngine :: line 0" data: no]

Can anyone nail down some steps for reproducing this problem? I don't see it immediately after opening Firefox, but it often appears after browsing normally for a while.
A workaround for me is to open a new window (Ctrl+N). Change the search engine in this new window, then close it.
After doing that, the search bar in my original window works again.

Mail App stops responding and the whole system gets stuck!!!

I'm using an iMac 3.06 GHz Intel Core i3 computer with 4GB of RAM.
For the past year or so I have noticed the Mail app stops responding. When I try to close it, it still can't be closed. Even when I try to Force quit it, still it stays the same. When this happens the Safari and other internet based apps can't download data and all I can see is black web pages trying to download data forever.
Then I'm left with the option to restart the computer. When I try to restart the machine. It start closing down all the other running apps and gets stuck when closing down the Mail app. It says "The Mail app does not respond. Please try to close it down Manually" but, still it can't be closed. So I'm only left with the option to shut down the computer by pressing down the power buttion for 4 seconds and start the computer again.
I have been noticing this problem for a while (I think about a year) I was using OS Lion. I recently updated to the new OS X Version 10.9 Mavericks (I believe this is the latest) but, the problem seem to remain unsolved.
Kind Regards
Francis

From the CONSOLE log:
6/1/09 12:12:29 PM Mail[11918] Error: I/O error for database at /Users/stephenpower/Library/Mail/AvailableFeeds. SQLite error code:1, 'SQL logic error or missing database'
6/1/09 12:12:29 PM Mail[11918] SyncServices[ISyncSessionDriver]: Caught top level exception: I/O error for database at /Users/stephenpower/Library/Mail/AvailableFeeds. SQLite error code:1, 'SQL logic error or missing database' Stack trace: (0x924680ab 0x94c54e3b 0x92467bd1 0x691f2a 0x6921c8 0x94c54e3b 0x9067bf0a 0x9067b3e8 0x9067717b 0x906ace40 0x906a1c2d 0x906a17da 0x90680ff1 0x3869d0 0x3868e1 0x38686e 0x9066b2f2 0x906b1260 0x906b0ad4 0x906b07ff 0x9066d3b8 0x9066cf89 0x9066be90 0x386657 0x3867e2 0x18ab9029 0x96f75d28 0x96f61d7d 0x96ffb7d6 0x95c58e0d 0x95c589b4 0x92594155 0x92594012)

Spotlight/Finder can't find a file, yet when I search the timecapsule for they find it. If I try to restore the file I get "file with that name already exists...." What is wrong?

I was trying to find a file (iTunes Backup). When using finder/Spotlight they couldn't find the file.
I then opened up my timecapsule and searched for the file....tick-a-de-da it found it in yesterdays backup. I attempted to restore the file and got the prompt "A file with that name already exists in this location, would you like to keep both, replace the file or cancel the request.
So if the file is there why can't spotlight/finder find the file??
If it helps I get this from the terminal when checking if indexing was enabled.
$ mdutil -s -a
Indexing enabled.
/Volumes/Data:
2014-11-18 18:09:39.542 mdutil[1472:572531] Metadata.framework [Error]: mdsCopyStoreAttributes failed: (8) (os/kern) no access
No index.
/Volumes/Time Machine Backups:
Indexing and searching disabled.
/Volumes/Time Machine Backups/Backups.backupdb:
Indexing enabled.

Hi Danielle,
Is there any possibilty that some of your files (a VI or DLL?) have been moved, renamed, or deleted? Also, what version of LabVIEW are you using and are you using any .NET DLLs? Another option to consider would involve VISA or DAQmx property nodes. Are you using any of these property nodes in your code? Here is a KnowledgeBase article to describe more about the VISA and DAQmx property nodes in a source distribution:
Error Creating Source Distributions Involving rc Files: http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C?OpenDocument
I hope this is able to help.
Anna L
Applications Engineer
National Instruments

Why does the installer keep getting stuck but no error messages appear in the log?

So as of I think recently, I've been having problems installing things. I'm using installer version 2.1.
I found myself having to re-install a driver for my tablet awhile ago, and every time I tried to install it the installer got stuck in the 90%s somewhere. However, no error window popped up and when i went to look at the log, it didn't show any errors.
I again encountered this same installing problem today when I went to install a newer slightly updated version of Java which would work on os x 10.4 and the installer got stuck at 99% again showing no errors.
Help? I have no idea what the problem could be, I believe it's way beyond me.

Hello, took me awhile to find this out, but...
Get the combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reapply the Combo Update.
Repair Permissions afterwords, reboot.

A iPhone 4S (currently in possession of it) was dropped into the ocean and we can get it into DFU and recovery mode, but we can't get it to go to the lock screen or home screen the phone just gets stuck on the apple symbol, how can I fix this?

Hey, apparently this iPhone 4S was dropped into the ocean and the light for the camera and a light where the 3G/4G bar is are both glowing. The iPhone 4S, I assume, was on iOS 5.1.1 I need help getting off info from it WITHOUT RESTORING IT. I'm not sure if Apple has any third party apps that they are allowed to suggest to us or if I'm on my own on this one, but if you guys can help I would greatly apperciate it.
Thanks!

Those are definitely features of liquid damage. First step after completely drying the iPhone would be battery replacement. The camera circuitry and proximity sensor circuitry are surging because you are seeing these lights.
New battery may get this booted back up so you can recover data, or even get the iPhone working again.

Updates for my apps from the Android Market get stuck on the download often.

Its as if they are perpetually downloading or installing. It happens at least a couple of times a week.

I think it's a problem with the market app that is installed. they need to update their market version.
Using a different rom, and market works fine. I'll leave it at that.
- Signature Starts Now -
I don't work for Toshiba, so please consider my advice Free; like Open Source.
*OH HAIZ! I rooted teh Thrives*
- End Signature -

IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play

I am having trouble burning DVDs. Everything seems to be working fine during the iDVD project creation. I can watch the movie and select scenes within iDVD. Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left. Yet it ejects the DVD and the DVD won't play when inserted into a DVD player. It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play. I have already uninstalled and reinstalled iDVD. The problem persists. It seems like the burner itself is the problem. What can I do to fix it? I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

How can I get parameter name?

ODatabase odb("test", "scott", "tiger");
OParameterCollection params = odb.GetParameters();
-------> and next how can I get parameter name?
I hope get stored procedure parameter names and settiing parameter Add just like below.
Plz tell me how can I get parameter name?
I'm Korean, and my english is poor. sorry : )
// add a parameter named 'DEPTNO'
params.Add("DEPTNO", 20, OPARAMETER_INVAR, OTYPE_NUMBER);
// add a parameter named 'EMPCURSOR'
params.Add("EMPCURSOR", "", OPARAMETER_OUTVAR, OTYPE_CURSOR);
//Execute the SQL statement
odb.ExecuteSQL("BEGIN Employee.GetEmpData (:DEPTNO, :EMPCURSOR); END;");

ok, alright. I'm trying to write a program to easily test EJBs with a user giving input and directly seeing the results of function calls to the Bean. The user gives the JNDI name of the EJB, I instantiate the bean, give the user a list of function calls from the bean, and then he/she chooses the function they want to execute and give input of the parameters values they want. Everything is done remotely and at runtime, and the only real problem is that the user only sees "myFunc ( String )" and it would be confusing if there are several parameters of the same type.
Yes, I do realize there are other ways to test, I was developing this to try a new method that I thought could be beneficial to me.

The %5BOut%5D gets Stuck to Parameter name in Additional Results

Similar Messages

Maybe you are looking for