The parameters specified by the step do not match the sequence parameters

In TestStand 4.0, is it possible to search for all step/sequence parameter errors prior to running the sequence?
Solved!
Go to Solution.

Hi,
That sounds interesting.
I tried a small example which calls a Sequence which passes two paramaters, one number and one string. I then linked these two locals except I specified them as one string and one number. I changed the load setting of the SequenceCall Step to Preload when sequencefile opened. I saved and closed the file.
When I opened the file, no warning or error was flagged. When the Sequence was run it errored on the call to the step with "Type of argument expression 'Locals.arg1' is incompatible with parameter 'Arg1'. Expected Number, found String".
It would be quite envolved to a find all the sequences in a file, get it's arguments, get the Expression, check if its not a constant and if not get the type of the variable in the expression and check it against argument parmater type. Repeat this for all parameter arguments. Repeat this for all sequences.
Then how do you report an errors. How do you handle SequenceCalls that call sequences contained in different sequencefiles.
You can find the arguments in the Step.TS.SData.ActualArgs.
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

SQL Query - The number of columns specified in "SQL Query" does not match t

I am creating new UDM for tablespace alert, below is my query,however its failing with error
SQL Query - The number of columns specified in "SQL Query" does not match the value specified in "SQL Query Output"
I selected Metric type is number
SQL Query Format : Two columns
Query:
SELECT d.tablespace_name,round(((a.bytes - NVL(f.bytes,0))*100/a.maxbytes),2)
used_pct FROM sys.dba_tablespaces d,(select tablespace_name, sum(bytes) bytes, sum(greatest(maxbytes,bytes)) maxbytes from sys.dba_data_files group by tablespace_name) a,(select tablespace_name, sum(bytes) bytes from sys.dba_free_space group by tablespace_name) f
WHERE d.tablespace_name = a.tablespace_name(+) AND d.tablespace_name = f.tablespace_name(+)
AND NOT (d.extent_management = 'LOCAL' AND d.contents = 'TEMPORARY');
Any clues why i am getting error.

SQL> SELECT d.tablespace_name,round(((a.bytes - NVL(f.bytes,0))*100/a.maxbytes),2) used_pct
2 FROM sys.dba_tablespaces d,(select tablespace_name, sum(bytes) bytes, sum(greatest(maxbytes,bytes)) maxbytes from sys.dba_data_files group by tablespace_name) a,(select tablespace_name, sum(bytes) bytes from sys.dba_free_space group by tablespace_name) f
3 WHERE d.tablespace_name = a.tablespace_name(+) AND d.tablespace_name = f.tablespace_name(+)
4 AND NOT (d.extent_management = 'LOCAL' AND d.contents = 'TEMPORARY');
TABLESPACE_NAME USED_PCT
MGMT_TABLESPACE .82
SYSAUX 1.52
UNDOTBS1 .32
RMAN .02
CORRUPT_TS 10.63
USERS 0
SYSTEM 2.26
MGMT_ECM_DEPOT_TS .04
MGMT_AD4J_TS 0

MY CLIPS ARE NOT MATCHING ME SEQUENCE SETTINGS.

I have had the misfortune of having to convert some Flip camera files into FCP for a presentation. As I am dragging them into my Timeline (which has a standard DV NTSC 48kHz preset) I get the message that my clip and sequence are of "different
formats" and I get an instruction box whihc asks me if I'd like to switch the sequence settings to match the clip. My question is, How can I see the specs of the clip I'm importing and locate the reasons why the two don't match. I also have sometimes used MPEG streamclip to convert to a DV file to be imported into the sequence, and I get, often the same message. I know something is over my head here.
Thank you for any suggestions.

You can see the clip specifications in item properties. What are the original specifications of the media? Please provide complete and exact information. You can find that in movie info in the QT player. It's possible in the conversion is Streamclip was not done correctly.

[Forum FAQ] Troubleshooting error "The specified SQL server instance is not valid" when installing SCOM reporting service

Symptom
If you have failed to install SCOM reporting service, you may encounter below error when you reinstall it:
“The specified SQL server instance is not valid”.
(Figure 1)
Figure 1.
Reason
This issue may be caused by multiple reasons, for example the reasons in Figure 1.
However, you may find that SSRS and Report Server website are configured correctly and no SSL or proxy Server is used. In these scenario, you can open the log file under path
to find the root reason:
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Later, you will find the error as below:
ERROR: Throwing Microsoft.ReportingServices.Library.ReportServerDisabledException: , Microsoft.ReportingServices.Library.ReportServerDisabledException:
The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. ---> System.Runtime.InteropServices.COMException
(0x80090016): Keyset does not exist (Exception from HRESULT: 0x80090016)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSManagedCrypto.RSCrypto.ReencryptSymmetricKey(Byte[] symKeyBlob, Byte[] pPublicKeyBlob)
at Microsoft.ReportingServices.Library.ConnectionManager.<GetEncryptionKey>b__2()
--- End of inner exception stack trace ---;
Solution
According to the error message, you can delete encrypted content by following the steps below:
Open SQL Reporting Services Configuration Manager.
Select “Encryption Keys”.
Click “Delete” to delete all encrypted content. (Figure 2)
Figure 2.
After that, we can install SCOM reporting service again, after successfully install reporting service, we should see the SCOM operation console as below:
Figure 3.
In addition, you may also encounter other errors when installing SCOM reporting service, and the troubleshooting steps may be different. However, we can also check SQL reporting
service logs to find the root reason.
Here are some articles that would be helpful for SCOM reporting service installation and troubleshooting:
How to Install the Operations Manager Reporting Server
http://technet.microsoft.com/en-us/library/hh298611.aspx
Unable to install SCOM 2012 Reporting Services
http://blogs.technet.com/b/mdegre/archive/2013/05/27/unable-to-install-scom-2012-reporting-services.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support

]The server name server_migration_2 specified with -Dweblogic.Name does not

Hi!
I followed the following steps to configure a clustered environment with two machines:
- installation of Oracle WebLogic Server 11g (10.3.3) in machine A and B
- creation of a domain using configuration wizard (in machine A)
- distributed domain using pack (machine A) and unpack (machine B)
- startup of node manager in both machines (both reachable)
- creation of a Managed Server 1 in machine A
- creation of a Managed Server 2 in machine B
- startup of the Managed Server 1 in machine A (it works fine)
- startup of the Managed Server 2 in machine B , it fails with the following error:
<Nov 30, 2010 12:39:28 PM WET> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name server_migration_2 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:803)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:493)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<Nov 30, 2010 12:39:28 PM WET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
The config.xml file located at ../user_projects/domains/mydomain/config/ in Machine 1 has the full environment setup, however the same file on machine 2 only has admin server configuration.
Why it happens? These two files must be synchronized? The config.xml in the Machine 2 is used by who? Admin server uses this file?
Thanks a lot
A.

If your newly created managed server is on a 3rd machine you will still need to 'pack/unpack', to transport the configuration files to the new machine.
If your 3rd managed server share domain_home with an already existing managed server you wont need to do this. In this case when a new managed server is created in the admin console, the admin server will propogate the change to the existing managed server which will update its configuration files in its local domain_home. The new server when starting will pick up this updated details from the shared location and will be able to start.
You were doing the pack after creating admin server alone. So the config files transported to remote machine has only details of Admin Server and using that you were trying to start the managed server, where i it clearly failed saying that it can't find that managed server name in its configuration.
If you have adavance knowledge of how many managed servers you need to create , at the time of domain creation, the right way is to configure all the man servers in the domain configuration wizard and then use pack/unpack to distribute the configuration files to each of the remote machine where the managed servers run.
Hope it makes sense.

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the n

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!

Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel

I have a disconnect between my external hard drive and lightroom 5.6. The recommended steps do not connect 11000 photos on the hard drive. How can I connect? I am concerned I have lost my edits in lightroom.

I have a disconnect between my external hard drive and lightroom 5.6. The recommended steps do not connect 11000 photos on the hard drive. How can I connect? I am concerned I have lost my edits in lightroom.

after some sorting out your article, I clicked on a question mark with the message find the missing folder. This brought me to a page where I could choose a folder by year and click on it. The question marks disappeared and the photos were available. In some cases I had to click on the year folder for each subfolder by date.
The find missing folders message did not bring me to the finder window in which I could click on folders in the hard drive itself. I appreciate your help big time!!

How can i get my imac proceed to home page from restarting endlessly? it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

how can i get my imac proceed to home page from restarting endlessly? it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

Hi
My Powerbook was the same. Only fix is to reinstall OSX from the install CD but be sure not to pick the Format and install clean. Once you boot with the install CD pick the preserve user data and settings.
On My machine the reinstall looked perfect. My network, email, files and all the programmes were all there. Most apps worked fine but Adobe CS2, Virtual PC and NetBarrier all needed reinastallation as they reported a few files or registration was missing. I went for the 10.4.3 upgrade again and it worked fine.
Good luck
D

When i run a sequence with ivi step types in simulation mode i get the error code number BFFA0015 - Types do not match.

When i run the sequence with ivi step types in simulation mode i get the error Types do not mathc. The step that generates this error is an IviScope step type and is configured as a measurement. Th weird thing is that in real mode is working perfectly. I have three measure steps and i get the error in all of them. The exact error message is:
UUT Result: Error, Error executing substep 'Post'. An exception occurred calling 'RunStep' in 'ISubstep' of 'TestStand Ivi Step Types 1.0 Type Library' An error occurred while executing the step. Component Works IVI Control Error: The IVI Read operation failed on channel '1' for logical name 'SampleScope'. Details: (1
) Types do not match. [IVI Error Code: BFFA0015] Source: TSIviStepTypes [Error Code: -30721, User-defined error code.]
Can someone tell me how to fix this problem?. It seems to me that the simulation generates a diferent type of measurement of that generated in real mode.

Update:
The simulation driver appears to be raising the error. By switching to specific driver simulation the error does not occur. This may be a problem in either the class simulation driver or the specific driver.
Scott Richardson
National Instruments

HT201263 these steps is not working it will go the when it's down restoring it with tell me to connect to itunse

these steps is not working because every time it down restoring it will still say ipod disable connect to itunes

Try placing the iPod in DFU mode and then restore:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Datetime value does not match the specified format

Hi All,
I am writing this function for a template
case when "Employment Events (Current)"."Most Recent Hire Date" is NULL then NULL else CAST(TIMESTAMPDIFF(SQL_TSI_YEAR,cast(cast("Employment Events (Current)"."Most Recent Hire Date" as char)as timestamp),Cast(Cast(@{EndDate}{CAST('2011-01-01' AS DATE)} AS CHAR) AS TIMESTAMP)) AS CHAR)||' year(s) ' end
but when it runs, it throws me this error
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 46046] Datetime value 2011-01-01 does not match the specified format. (HY000)
What am I doing wrong? "Employment Events (Current)"."Most Recent Hire Date" is set to max - aggregation in the rpd.

I found the solution as well.
The ODBC driver on the Windows server was old (Version 6). I upgraded that to SQL Server Native Client 11.0 and everything works fine.

The affinity mask specified does not match the CPU mask on this system.

We are having a problem with one of our SQL servers, and in comparing it to the backup server which is working fine, I noticed some differences. I attempted to correct the differences, but no luck.
The dell server has 4 dual-core processors and at one point hyper-threading was enabled. One of our DBAs recommended that it be turned off. We didn't have any major problems until recently and it seems that getting this setting right is the lynchpin. Any suggestions?
John
EXEC sys.sp_configure N'show advanced options', N'1' RECONFIGURE WITH OVERRIDE
GO
EXEC sys.sp_configure N'affinity mask', N'0'
GO
EXEC sys.sp_configure N'affinity I/O mask', N'0'
GO
RECONFIGURE WITH OVERRIDE
GO
EXEC sys.sp_configure N'show advanced options', N'0' RECONFIGURE WITH OVERRIDE
GO
Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
Msg 5832, Level 16, State 1, Line 1
The affinity mask specified does not match the CPU mask on this system.
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51
The configuration option 'affinity mask' does not exist, or it may be an advanced option.
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51
The configuration option 'affinity I/O mask' does not exist, or it may be an advanced option.
Msg 5832, Level 16, State 1, Line 1
The affinity mask specified does not match the CPU mask on this system.
Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.
Msg 5832, Level 16, State 1, Line 1
The affinity mask specified does not match the CPU mask on this system.

I had P2V'd a SQL 2008 server and was having this issue. I tried everything I could find to get the affinity corrected; setting the Lock Pages security policy, trying the affinity commands in Single User mode, etc.
Then wrighbar's response got me headed in the right direction, but I ran into an issue where the previous engineer had set the Physical SQL server to have affinity on procs 9-16 of a 16 proc box, I could only set up to 8 procs on my VM. After searching
for a while for registry keys or config files that might be editable to change the affinity I couldn't find where SQL got that information from. Finally it hit me, maybe it's stored in the master or msdb datatbases.
SOLUTION: I was able to go back to the original Physical machine, change the affinity settings there, Stop SQL on both boxes, then copied MASTER, MODEL, MSDB, TEMPDB from the original Physical machine to the new virtual machine. All services started
OK on the virtual machine now and affinity was set the way I needed it.

Creating EO: The specified schema object name is not an existing object.

Hi Experts,
I am Using Jdev 11.1.2.2
I am connecting to Mysql DB, When am creating a EO with in the same schema, am getting following error:
The specified schema object name is not an existing object. Unselect Existing Object or enter an existing schema object.in jdev
If i unchecked the existing schema its creating empty eo, it is unable mapping the attributes. So how can resolve it.
Pl help out me.
Best Regards
Bittu.

try prefixing the objectName with the schemaName when you create the EO in mySQL , as mentioned at end of this thread -
Error creating EO- The specified schema object is not an existng object

Error the entered value does not match the specified field type

Hi,
When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
Any help would be appreciated.
Thanks in advance.
Sudha.

Hi Sudha,
It probably have to do with how you defined the field.
Is Null value allowed?
What are the field definitions?
Thanks,
Jesper

The parameters specified by the step do not match the sequence parameters

Similar Messages

Maybe you are looking for