The PGA was inadequately sized

Let me get the specs out of the way
OS: Windows Adv Srv 2003 SP2
Oracle: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
Memory: 10 GB
When I run ADDM report (in OEM), I'm constantly getting "The PGA was inadequately sized, causing additional I/O to temporary tablespaces to consume significant database time."
this is my sga params
SQL> show sga
Total System Global Area 264241152 bytes
Fixed Size 1412268 bytes
Variable Size 99185492 bytes
Database Buffers 159383552 bytes
Redo Buffers 4259840 bytes
I have Automatic Shared Memory Management enabled.
total SGA is 252 MB
Aggregate PGA Target is 1536 MB
what else can I do? I'm sitting around 1.75 GB between sga and pga and its pushing close to the 2 GB Windows per process memory limit.
any suggestions????
thanks in advanced
ku

Check v$pga_target_adivce what would be the proper size of PGA_AGGREGATE_TARGET
[email protected]> select * from v$pga_target_advice;
BTW. You can overcome the 2GB limit on windows.
Best Regards
Krystian Zieja / mob

Similar Messages

The SGA was inadequately sized, causing additional I/O or hard parses.

Dear all,
We are using 10g RAC On Solaris 5.10
Very freuently,we are getting the below message in DB Console
The SGA was inadequately sized, causing additional I/O or hard parses.
Additional Information
The value of parameter "sga_target" was "15360 M" during the analysis period.
Under recommendations,
I found that
Increase the size of the SGA by setting the parameter "sga_target" to 30720 M.
Findings Path
Findings Impact (%) Additional Information
The SGA was inadequately sized, causing additional I/O or hard parses. 27 Additional Information
Wait class "User I/O" was consuming significant database time. 13.2
Hard parsing of SQL statements was consuming significant database time. 4.9
Contention for latches related to the shared pool was consuming significant database time. 0.6
Wait class "Concurrency" was consuming significant database time
Can I rely on this info alone and increase SGA.. Is there any other way I confirm this ?.
Dear Seniors,
Please ignore this Thread if you find this question silly..
Please advise
Kai

Hi Kai,
Can I rely on this info alone and increase SGA.. Is there any other way I confirm this ?.Yes. Oracle has specific "cache" advisors to say if your data buffers of shared pool regions are too small.
I have my notes here:
http://www.dba-oracle.com/art_builder_buffers.htm
The besy way to see them is to run a STATSPACK or AWR report . . .
if you find this question silly..It''s not silly at all, it's a VERY common question!
http://www.dba-oracle.com/t_estimating_sga_size.htm
If you are running Oracle on a dedicated server, it's wasteful NOT to allocate all of the RAM to Oracle, less 20% for the OS . . .
Lastly, remember that Oracle has an insatiable appetite for RAM, but there is a point of diminishing marginal return . . .
Hope this helps . . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference"
http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm

Error : SGA was inadequately sized, causing additional I/O or hard parses

Friends ,
I got the Following error in my Production server's (Oracle10g with AIX 5.3 platform ) PERFORMANCE ANALYSIS part of OEM :
"The SGA was inadequately sized, causing additional I/O or hard parses." And it shows the Impact result of Database 1.4% .
In present my SGA size is = 9584 MB , And oracle itself recommended to increase it to = 19168 MB (that means twice time of the present value) .
And my total OS Ram size = 32 GB
In this moment , can anybody plz suggest me ,
For increasing the SGA Size , which things(or Database related matters) I need to consider .
OR
Can I face any major problem If I increase the SGA size ?
ORacle version : ORacle 10g
Platform : AIX 5.3 unix server
Number of Database : One
Waiting for ur kind reply .. ...
Edited by: shipon_97 on Oct 19, 2008 6:45 PM

Hi..
>
For increasing the RAM Size , which things(or Database related matters) I need to consider .
OR
Can I face any major problem If I increase the RAM size ?
>
What is the oracle version you are using??
Why do you want to increase the RAM size.Its already 32GB.Why don't you increase the SGA.How many databases are installed on the server.Is there some other applications running on the server.
Anand

The new credit card-sized MP3 player:

My head phone jack on my ZEN Micro finally came loose and I can't find any place that will solder it, any suggestions would be welcomed. So I was wondering if there is: an official, announced, projected, speculated, anticipated, rumored?release date for the new credit card-sized MP3 player that I think is being called the ZEN?Thanks,?Bob B?

Hi Cat,?I have the same problem like this guy in this forum... http://forums.creative.com/creativel...essage.id=7666, I just don't know what happen cause the thread stops without confirming that neither one of the advice really works. Just got your new product (ZEN) from the?IT?show in Singapore,?some guys are talking about. My ZEN is about 3 days old, I'm so despirate that I couldn't maximize the capacity of this gadget. I didn't buy the ZEN?just for music alone. The main reason was the good quality of the video,?thought that I can use?watching my favorite movies. Please help me find the solution. Thanks!

Help. Windows 7: The application was unable to start correctly (0xc0150002).

I just got a new computer. Windows 7. Toshiba. Intel 13-3110M Processor. 6GB DDR3 Memory. 1TB 5400rpm Hard Drive. Intel HD Graphics 4000. 2.40 GHz. 64-bit operating system.
I installed CS5 Creative Suite on it (which worked perfectly fine on my two previous computers--Windows 7 and Windows 8). Since then Photoshop and Illustrator have been giving me the same error message. "The application was unable to start correctly (0xc0150002). Click OK to close the application." The programs still open and remain open after pressing okay, but the message comes back every minute or so.
Then, with InDesign, the program won't open at all. It gives me the error message of "Cannot load the PDF.RPLN plug-in. It is dependent on the EPS PAGE ITEM.RPLN plug-in, which failed to load. Please check documentation for the EPS PAGE ITEM.RPLN plug-in." Then InDesign stops responding and closes itself.
I have to live with this computer for two more weeks (and then I go home and can use my old one again/return this current laptop), and I have schoolwork that counts on me being able to use these programs. If anybody could help me, I would be super grateful!
Oh, and I've already tried installing and uninstalling it.

Without system information nobody can say anything. also check the logs in the Event Viewer.
Mylenium

Hi Guys, I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
Alex

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

"open project was cancelled or the application was unable to load database for..."

I'm doing a project for my Professional Writing course and I
have to use RoboHelp to create an online help document. The
professor provided templates for us to use but when I go to open
the project file I get the following error: "open project was
cancelled or the application was unable to load database
for....(then the directory)"
I know the project file isn't corrupted because the members
of my class are using the same one without issue. I tried
re-downloading the file, I also re-installed the program itself,
still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
The only other suggestions I have seen are that I don't have
edit perms for the system, but it's my personal laptop and I have
full admin privs. I thought at first that the folder was read-only,
but when I opened it up all it displays is the little green box in
the checkbox (which doesn't mean the folder is read-only, it's just
some stupid windows default, it's only read-only if the box is
actually checked). I tried making the entire directory read-only
and then turn it off but still get the same error.
Any suggestions?

There's a topic on my site about Opening Projects that
includes the method of deleting the CPD and XPJ files but I didn't
cover that as the project is good for everyone else. Anything is
worth a try at the moment though.
Another thing to try is to rename the course folder, then
create a new folder with the same name plus all sub folders. Then
move the files across. That will ensure the folder properties are
good and not read only. Yes I know what you said but again anything
is worth a try.
Also, in the last post you are saying the directory is not
read-only. I assume the files are all good?
Ref my previous post, is it the case that now you are getting
an error before the original error would have popped up?

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode.

How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode. Where can I find this, or is there a general number I can use?

Hello, and welcome to Apple Support Communities!
Try entering four zeroes.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

The installation was interrupted message after iTunes upgrade

I would appreciate help with my problem. I'd like to use iTunes but it doesn't work.
Description of the problem: I was happily using iTunes for more than a year. I received a notice that a new version was available and I upgraded. When the installation was complete I received the following message:
"The installation was interrupted before iTunes could be completely installed."
iTunes is not listed in the Programs menu and there are no files at c:\program files\itunes (itunes folder is not there).
After subsequent downloads and installs, I get the same error. When I do the iTunes standard install, QuickTime is
available and works well. I went back to the previous version, but it continued to give me the same error. I found very old versions of iTunes on the web and they too had the same problem.
During the install the iTunes icon briefly appears on my desktop and then disappears. The message box indicating that the installation was interrupted occurs right after that.
I've tried to describe the problem in quite a bit of detail below to help avoid suggested fixes that have been tried and failed.
1. I have followed the steps in the KB article. Please see the details of that work below.
http://docs.info.apple.com/article.html?artnum=93976
2. I have Administrator access. I have verified that I'm part of both the Adminstrators and SERVICE groups under Impersonate a client after authentication. This process is found in the following doc:
http://docs.info.apple.com/article.html?artnum=300361
3. Windows is fully updated through the Windows Update utility. See Windows version info below.
4. I can install any other application. I use this computer for work and I can install and uninstall any other application
I try. No other known errors or problems. I've installed other applications that use Microsoft Installer and InstallShield installers without problems.
5. I tried the Quicktime standalone install and I received the notice that "The installation was interrupted..." Quicktime is now not found on the machine and there is no Quicktime files in the Program Files. During the middle of the installation, I received the following error. Error during QuickTime Standalone (7.1.0.210) install:
Error 1905.Module c:\program files\QuickTime\qtuiPanelControl.dll failed to unregister. HRESULT -2147220472 Contact your support personnel.
When I attempt to install iTunes from the standard install, Quicktime installs properly and works. It only fails during the standalone install.
6. No strange characters in the folder. There is no itunes folder so it contains no folder. The download exe is on my desktop.
7. Temp Folder emptied and machine restarted (many times)
8. Uninstall older versions - They are not listed as installed so there is nothing to uninstall. The Windows Clean Up utility does not list them so I can't use that tool to remove them. It appears that iTunes is cleaning itself up when the installation fails so there are no files. There is no iTunes folder at c:\program files\.
9. iPodService alert is not there so I don't need to delete it.
10. Redownload software - It has been downloaded many times. Each time I'm careful to permanently delete the previous install exe so it is redownloaded.
11. AntiVirus software has been disabled. I'm using McAfee VS Enterprise 8.0.0. I have also checked the AV logs to see if it has blocked an install or other event around that time - there is nothing in the AV logs to show any blocked or prevented activity. No activity at all because the software is disabled.
12. Registry - A search of "itunes" in the Registry Editor finds a lot of references. Too many to list, but most are in keys that apply to file types.
13. I have downloaded and attempted to install the Windows Installer 3.0 package from the following URL:
http://www.microsoft.com/downloads/details.aspx?FamilyID=5FBC5470-B259-4733-A914 -A956122E08E8&displaylang=en&Hash=9PV3FS4
I'm told by a box during the install that the version I have installed is newer than the one on the website and there is no need to install it.
14. The version of iTunes that I'm trying to install right now is 6.0.4.2. I've had this problem for at least three months so I've been trying many versions before its release.
15. Other than the mentioned AV program, I don't have a third-party firewall, anti-spyware or monitoring program installed.
System:
IBM ThinkPad T42
Windows XP Pro
1 GB RAM
McAfee VirusScan Enterprise 8.0.0
Microsoft Windows XP Professional
Version: 5.1.2600
Service Pack: 2.0
Location: C:\WINDOWS
Hot Fix: KB913446
IBM T42 Windows XP Pro

It is a miracle - After about 9 months without itunes, the new release installed on my machine today and appears to be working.
7.0.0.70 is the verion I just installed.
Another note to add to this now resolved issue. I bought an AirPort Express and I was not able to install the Admin software on the CD. I received the same error as I received with iTunes and Quicktime. This leads me to believe that this problem is in the registry or some other installer issue that is specific to Apple installations. I will have to go home and try to re-install that software. Maybe the new iTunes version cleared up the problem.

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

How do I wipe everything off, and go back to the way the phone was set when I got it?

How do I wipe everything off, and go back to the way the phone was set when I got it? I am thinking that might be the only way to fix my wifi issue. Thanks!

Hello, if you havent tried the doesktop manager option, you can do it from the device aswell... Just make sure you save all your contacts to your SIM.
you can go into your Security Options (in Options menu) and select wipe handheld.
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on

Why am I unable to update my Firefox 3.0 when the pop-up menu tells me that the download was complete?

I am repeatedly told to upgrade my version of Firefox.
Each time I attempt this, whether I disable my anti-virus software (AVG) or not, I get a pop-up menu telling me the download was completed but I still seem to be on the 3.0 version.

You appear to have upgraded to a supported version. I will also attempt to answer your other question. [/questions/885242]

I am trying to email pictures from my ipad to my email address on my computer and I have been going along nice but now I get a message that says "cannot send mail the message was rejected by the server" can't see to figure out why it stopped sending now.

I have been emailing pictures from my ipad to my computer and have been going along nicely and now when I went to send 5 pictures to my computer from my ipad I am getting a message that says " cannot send mail The message was rejected by the server" cannot understand why this is happening and have not been able to fix. Now when I try to send pictues even to another email address I am getting the same message.
Help.

Email may not be the best way to move pictures.
There are lots of ways of moving files.
A simple and popular way to copy files and share files among your devices.
https://www.dropbox.com/
"Box lets you store all of your content online, so you can access, manage and share it from anywhere. Integrate Box with Google Apps and Salesforce and access Box on mobile devices" Rated the most secure cloud storage by SkyHigh Networks.
https://www.box.com/
Using iTunes to transfer files:
http://support.apple.com/kb/HT4094?viewlocale=en_US&locale=en_US
Files Connect -- "Cloud Storage services like Dropbox, MobileMe iDisk, Google Docs/Picasa, Facebook photos, FTP, SFTP, WebDAV ... AFS (Apple File Shares) SMB (Windows shares) protocols"
https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
Windows File server
http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
"The kiteworks mobile file sharing solution provides secure creation, viewing, and sharing of enterprise content on smartphones and tablets while providing IT and security teams the administrative controls to manage user privileges and access rights necessary to ensure enterprise security and compliance." " Includes choice of private cloud on-premise."
http://www.accellion.com/solutions/mobile-enablement/mobile-file-sharing
"Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
http://www.tidal.it/?page_id=309&lang=en
http://www.msec.it/blog/?page_id=11

The PGA was inadequately sized

Similar Messages

Maybe you are looking for