The problem of profiling a multi-thread flash game using adobe scout cc
I have a multi-thread flash game code, it can run perfectly. The main swf creates another swf which will connect to a remote server. I can get profiling information of the main swf using adobe scout cc, but the problem is that I can't get profiling information of another swf ! The scout complains " can't start a session because the telemetry data isn't valid" for another swf. Although some times, the scout does not complain, the Summary Panel of scout provides information“We encountered an error while processing this session: Some of the data we present may not be correct". And the scout log file shows:
Log file created: 2014/11/20 15:35:08
11/20/2014 15:35:08.395 Scout starting up.
11/20/2014 15:35:08.471 InitDNSService failed
11/20/2014 15:36:47.055 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [100000,200000] is greated than its parent
11/20/2014 15:36:47.057 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [200000,300000] is greated than its parent
11/20/2014 15:36:47.058 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [300000,400000] is greated than its parent
11/20/2014 15:36:47.058 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [400000,500000] is greated than its parent
11/20/2014 15:36:47.061 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [500000,600000] is greated than its parent
11/20/2014 15:36:47.062 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [600000,700000] is greated than its parent
11/20/2014 15:36:47.063 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [700000,800000] is greated than its parent
11/20/2014 15:36:47.063 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [800000,900000] is greated than its parent
11/20/2014 15:36:47.064 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [900000,1000000] is greated than its parent
11/20/2014 15:36:47.064 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [1000000,1100000] is greated than its parent
11/20/2014 15:36:47.064 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [1100000,1200000] is greated than its parent
11/20/2014 15:36:47.065 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [1200000,1300000] is greated than its parent
11/20/2014 15:36:47.065 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [1300000,1400000] is greated than its parent
11/20/2014 15:36:47.065 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [1400000,1500000] is greated than its parent
11/20/2014 15:36:47.066 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [1500000,1600000] is greated than its parent
11/20/2014 15:36:47.066 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [1600000,1700000] is greated than its parent
11/20/2014 15:36:47.066 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [1700000,1800000] is greated than its parent
11/20/2014 15:36:47.067 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [1800000,1900000] is greated than its parent
11/20/2014 15:36:47.067 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [1900000,2000000] is greated than its parent
11/20/2014 15:36:47.067 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [2000000,2100000] is greated than its parent
11/20/2014 15:36:47.068 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [2100000,2200000] is greated than its parent
11/20/2014 15:36:47.068 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [2200000,2300000] is greated than its parent
11/20/2014 15:36:47.068 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [2300000,2400000] is greated than its parent
11/20/2014 15:36:47.069 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [2400000,2500000] is greated than its parent
11/20/2014 15:36:47.069 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [2500000,2600000] is greated than its parent
11/20/2014 15:36:47.069 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [2600000,2700000] is greated than its parent
11/20/2014 15:36:47.070 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [2700000,2800000] is greated than its parent
11/20/2014 15:36:47.070 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [2800000,2900000] is greated than its parent
11/20/2014 15:36:47.070 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [2900000,3000000] is greated than its parent
11/20/2014 15:36:47.071 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [3000000,3100000] is greated than its parent
11/20/2014 15:36:47.071 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [3100000,3200000] is greated than its parent
11/20/2014 15:46:30.931 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [100000,200000] is greated than its parent
11/20/2014 15:46:30.933 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [200000,300000] is greated than its parent
11/20/2014 15:46:30.936 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [300000,400000] is greated than its parent
11/20/2014 15:46:30.937 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [400000,500000] is greated than its parent
11/20/2014 15:46:30.937 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [500000,600000] is greated than its parent
11/20/2014 15:46:30.937 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [600000,700000] is greated than its parent
11/20/2014 15:46:30.937 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [700000,800000] is greated than its parent
11/20/2014 15:46:30.938 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [800000,900000] is greated than its parent
11/20/2014 15:46:30.938 <2896> <telemetryCore.Query> <1> Incorrect data: Memory category 7 for frame stats query over time interval [900000,1000000] is greated than its parent
I run flash code directly on flash_player_11_7_sa.exe. I think the problem may have something to do with ActionScript Sampler of scout, because I can get the correct profiling information without ActionScript Sampler.
But I don't know what the information in the log file means.
We are using Microsoft SQL Server 2008 . but it's well with MySQL & JBoss
Similar Messages
-
My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off 2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.
My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off 2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.
-
I have installed Adobe Reader 11.0.07 for Mac OS 10.9.3. Have asked this question numerous time without results. The problems I am having are: I cannot scroll using the side slider on downloaded PDF files, nor can I fill in fillable files. Also, and this is extremely irritating, I cannot re-initialize the same file or initialize and another PDF file after I have initialized the first file. If you cannot help please let me know if should use an earlier version of Reader or find anther company that has the appropriate software.
Perhaps you missed that you started a discussion at I have OS 10.9.2 and have downloaded latest version of Reader 11. I can no longer fill in form or scroll using the side bar. and you did not respond to the last post there.
-
People Please help, I forgot my security questions answers but I know how to reset them but the problem is my rescue email is not longer used ( DELETED ) so what can I do please help me??????????
EZZTHEKILLER wrote:
is there any other way ...
Not in your case.
EZZTHEKILLER wrote:
I forgot my security questions answers but I know how to reset them but the problem is my rescue email is not longer used ( DELETED ) -
Create a flash video using adobe media encoder cc 2014
How to create a flash video using adobe media encoder cc 2014?
removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro
-
I am too having the same error code come up. I am using adobe Muse version 7.0
I am too having the same error code come up. I am using adobe Muse version 7.0
Hi KarmaM
There is scheduled maintenance running as we speak.
During the maintenance procedure the Admin Console Access, Partner Portal, FTP, Dreamweaver extension, Muse, Business Catalyst APIs, Partner registration and Trial site creation will experience service interruptions impacting sites on ALL datacenters.
Also, there might be several intermittent website front-end interruptions for some sites on the United States datacenter
For live update please check status page: http://status.businesscatalyst.com/ -
i don't remember my security answer and it's not my 1st time for using this device,i using this before..but the last time I try to buy some games using iTunes card its saying this is your 1st time using this device so I need to answer the security questio
https://expresslane.apple.com/
-
Clarification of the handle/body idiom in multi threaded applications
Hello
As some DBXML classes use the handle-body idiom (handle/body idiom in some docs), could someone please clarify the consequences of that in a multi threaded application like a web container?
For 100% Java people, like me, this is known in the Java world as 'programming towards interfaces', or as the Bridge pattern; which is seen as good practice.
Let's take an example. The class XmlQueryContext is not thread safe, but it has a copy constructor. Imagine that your web application has one XmlQueryContext, that we never use in a query, but that we prepare only to be copied in new threads. Is it thus safe to instantiate various new XmlQueryContexts using that copy constructor in various new threads and use them simultaneously?
Thank you
Koen
PS What I am really asking here is if somebody could please translate the following to Java parlé:
A copy constructor is provided for this class. The class is implemented using a handle-body idiom. When a handle is copied both handles maintain a reference to the same body.As a Java user you do not have to worry about how the C++ copy constructors behave. In the Java API if a copy constructor exists for the object, then the copy constructor will copy all of the original object's data into a new object (XmlContainer is the one exception to this rule, generally one should not use that copy constructor at all). So in short, what you plan to do will work.
Lauren Foutz -
The CPU utilization is 0% for the other remaining processes when multi threading is used
I am new to AE ,so I am trying to render a project enabling multi threading process the additional processes are present but their utilization is 0% .
I want to juice out every single CPU utiliaztion .
ANy help is greatly appriciated,.
My system specs:
AMD 9690 4.7 Ghz 8 core
32 GB DDR3
C:\256 GB Solid Satte Raid 0
GeForce 780 Ti DDR5 3GBIt is very tempting to try and use all of your system resources and multiprocessing for all your projects, but this is not the way After Effects works. Many third-party plug-ins, many codecs, and many operations do not respond well to multiprocessing. All it takes is one process in your entire thread that is not MP aware to foul the whole thing and give you longer render times.
You are also leaving zero processors for the rest of your computer. Not a wise idea.
After effects renders one frame at a time. One HD frame even with multiple layers of pixel processing just isn't that much data. It does take a while to do the calculations, but expecting to have every one of your CPUs jacked up at 100% to render a single frame of video is expecting an awful lot.
I would suggest that you read up on optimizing After Effects for your computer. Do not expect to be able to utilize 100% of your system resources at all times. That's just not the way processing video on a pixel by pixel basis works.
Just a little FYI, for 99% of my projects in After Effects I have render multiple frames simultaneously turned off. It just doesn't work with most of the things I do. Sorry for the disappointment. -
Multi-threaded performance server using 2 ports to two-way communication
Hi, I'm new in the forums so welcome everyone. I'm developing now an online computer game based on orginal Polish board-game, but it doesn't mean. Important is that I need to develope a high-performance multi-threaded server, which can serve... let's say few hundres of games, and a thousend of players simulateously. My server works on two ports/sockets.
First one is represented by "ServerSocketChannel clientConSsc" in my code. The main thread in my server class which invokes the method "run()" (which You can see below), registers clientConSsc with Selector and then repeatingly accepts incoming connections from clients on this socket. When connection(channel) is estabilished and clients wants to write some request to this channel, the main thread on server creates a new instance of class "RequestHandler" which extends Thread and handles this request (reads the request from channel, makes some changes on server, spreads some new messages to other clients in the same game and so on... everything on the same socket/port/channel). Then the channel/connection is closed by the server - I call such connections: "a short connections". In the same time the main thread continues the loop and is still able to accept connections from another players. That's the idea of multi-threaded server, right? :) And to this point, everything works fine, but... what if the server wants to trigger some new command, write new information to client?
Server could have tried to open a SocketChannel to client's IP address, but then the client programme would have to create and ServerSocketChannel object, bind it to some InetAddress and then... and then client becomes a server! - that breaks the idea of client-server cooperation and demands on players of my game to have routed some port on their machines. To resolve this problem I made some sort of "system" which, when some player/client is logging into my server, accepts second (this time constant, not "short") connection on the second port I mentoined on the beginning. This connection is held in variable "SocketChannel serverCon" of class "Player" - which reflects a player logged onto server. Server maintains every such connection till the client logs off. After the connection is accepted, the player whom connection it was is added to collection called "playersToRegisterToWrite". After the Selector.selectNow() is invoked (as You can see in the code below), each and every player's connection is registered in selector (with selection key - OP_WRITE and attachment pointing on owning player). In the same time client's code is trying to read some bytes from this connection and blocks on it until some bytes are written to this connection. When server wants to "tell" something to client, deliver some message/command, it creates a new instance of class which extends an abstract class called "ServerAction" (another new thread) and adds it to collection "actionsToDo". In ServerAction's method "run()" there are whole code to interact with client (e.g. send an update of players' list, an update of games' list, a chat message). Finnaly when Selector informs the server that some connection is writable (some client is waiting for commands), then server checks if there's any "actionToDo" involving this client/player. If there is, it unregisters the connection from Selector (so no other ServerAction (thread) can write on this connection) and starts the action. At the end of every "run()" method of subclass of ServerAction there's a code, which again adds the player to collection "playersToRegisterToWrite", so the player's connection can again be registered in Selector and the player can again receive informations from server - after it consumed THIS "ServerAction".
It looks to me like it should be working fine, but it's not. When I test my server and clients on the same machine (no ping/latency) everything seems to be working fine. But when it comes to play my game with somebody even on LAN or through the Internet there comes the problems. My first socket I describe (and first type of connections - short connections) works perfectly fine, so the requests triggered by client are delivered and handled properly. But the second socket is cirppling. For example: the server triggers a command refering to an update of clients logged to server' list. It is triggered by Selector so the client should be ready to read data from server, so the server sends data! And the client never receives it... Why?
It experimented a whole lot of time on SocketChannel's method "configureBlocking(boolean)", but it never helps. I think the client should always block it's listening thread on connection, contratry to server which is ment to be fast, so it should send the data through non-blocking channels. Am I right? Are there any rules refering blocking configuration of SocketChannels?
I will be grateful for every answer. To help You out I attach also drafts from run()'s methods of my classes.
Server's main method - main thread :
public void run() {
try {
selector = Selector.open();
clientConSsc.configureBlocking(false);
clientConSsc.register(selector , SelectionKey.OP_ACCEPT);
while(serverRunning) {
try {
selector.selectNow();
Iterator it;
synchronized(playersToRegisterToWrite) {
it = playersToRegisterToWrite.iterator();
while(it.hasNext()) {
Player player = (Player)it.next();
it.remove();
player.serverCon.configureBlocking(false);
player.serverCon.register(selector , SelectionKey.OP_WRITE , player);
Set keys = selector.selectedKeys() {
it = keys.iterator();
while(it.hasNext()) {
SelectionKey key = (SelectionKey)it.next();
if(key.isAcceptable()) {
it.remove();
clientCon = clientConSsc.accept();
clientCon.configureBlocking(false);
clientCon.register(selector , SelectionKey.OP_READ);
continue;
if(key.isReadable()) {
it.remove();
key.cancel();
new RequestHandler(this , (SocketChannel)key.channel()).start();
continue;
if(key.isWritable()) {
if(key.attachment() != null ) {
ServerAction action = null;
synchronized(actionsToDo) {
Iterator aIt = actionsToDo.iterator();
while(aIt.hasNext()) {
ServerAction temp = (ServerAction)aIt.next();
if(temp.getPlayer().equals((Player)key.attachment())) {
action = temp;
aIt.remove();
break;
if(action != null) {
key.channel().configureBlocking(false);
it.remove();
key.cancel();
action.start();
continue;
} catch(Exception e) {
statusArea.append(e.toString() + "\n");
e.printStackTrace();
continue;
} catch(ClosedChannelException e) {
statusArea.append(e.toString() + "\n");
} catch(IOException e) {
statusArea.append(e.toString() + "\n");
A part of server's RequestHandler's class' method run() - the method which handles requests triggered by client on first port:
public void run() {
boolean served = false;
try {
channel.configureBlocking(true);
retryCount++;
retry = false;
String command = ns.readText(channel).trim();
ns.statusArea.append("ktos przesyla komende: " + command + "\n");
if(command != null && !command.equals("ERROR")) {
String[] cmd = command.split("�");
ns.statusArea.append("komenda: " + cmd[0] + "\n");
if(cmd[0].equals("CHAT")) {
if(cmd.length != 5) {
retry();
} else {
if(cmd[2].equals("NOGAME")) { // jezeli nie ma okreslonej gry czyli rozsylamy do wszystkich
for(int i = 0 ; i < ns.loggedPlayersListItems.size() ; i++) {
Player current = (Player)ns.loggedPlayersListItems.get(i);
if(current.state == Player.CHOOSING && !current.equals(new Player(Integer.parseInt(cmd[1])))) // jezeli gracz jest w okienku wybierania gry to wysylamy mu broadcast
ns.actionsToDo.add(new SendMsg(ns , current , "CHAT�" + cmd[1] + "�" + cmd[3] + "�" + cmd[4]));
} else {
Game game = (Game)ns.gamesListItems.get(ns.gamesListItems.indexOf(new Game(Integer.parseInt(cmd[2]))));
for(int i = 0 ; i < game.players.size() ; i++) {
Player current = (Player)game.players.get(i);
if(!current.equals(new Player(Integer.parseInt(cmd[1]))))
ns.actionsToDo.add(new SendMsg(ns , current , "CHAT�" + cmd[1] + "�" + cmd[3] + "�" + cmd[4]));
served = true;
} else if(cmd[0].equals("GETGAMEINFO")) {
if(cmd.length != 3)
retry();
else {
int gameID = Integer.parseInt(cmd[2]);
ns.statusArea.append("poproszono o informacje o grze nr: " + gameID + "\n");
Game checkedGame = new Game(gameID);
if(ns.gamesListItems.contains(checkedGame)) {
Game game = (Game)ns.gamesListItems.get(ns.gamesListItems.indexOf(checkedGame));
channel.configureBlocking(true);
ObjectOutputStream oos = new ObjectOutputStream(channel.socket().getOutputStream());
oos.writeObject(game);
oos.writeObject(game.players);
oos.flush();
ns.statusArea.append("wyslano informacje o grze nr: " + gameID + "\n");
} else {
ns.statusArea.append("brak gry o nr: " + gameID + "\n");
served = true;
} catch(IOException e) {
e.printStackTrace();
if(!served) {
ns.findAndDisconnectPlayer(channel);
try {
channel.close();
} catch(IOException e) {
e.printStackTrace();
}An example of ServerAction's subclass - the class which triggers server commands to client on second port:
class UpdateLoggedPlayersList extends ServerAction {
public UpdateLoggedPlayersList(NeuroServer ns , Player player) {
super(ns , player);
public void run() {
try {
serverCon.configureBlocking(true);
ns.sendText("UPDATELOGGEDPLAYERSLIST" , serverCon);
if(ns.readText(serverCon).equals("OK")) {
ObjectOutputStream oos = new ObjectOutputStream(serverCon.socket().getOutputStream());
oos.writeObject(ns.loggedPlayersListItems);
oos.flush();
synchronized(ns.playersToRegisterToWrite) {
ns.playersToRegisterToWrite.add(player);
} catch(IOException e) {
e.printStackTrace();
}A part of client's CmdHandler's class' method run() - the method which handles commands triggered by server:
public void run() {
try {
while(works) {
String command = nc.readText(nc.serverCon);
System.out.println("Server przesyla komende: " + command + "\n");
String[] cmd = command.split("�");
if(cmd[0] != null && !cmd[0].equals("ERROR")) {
if(cmd[0].equals("CHAT")) {
if(nc.chooseGameDialog != null && nc.chooseGameDialog.isVisible()) { // jezeli na wybieraniu gry
newChatEntry(cmd[2] , null , cmd[3] , nc.chooseGameDialog.chatPane);
} else if(nc.readyDialog != null && nc.readyDialog.isVisible()) { // jesli na przygotowywaniu
Player sender = (Player)nc.actGame.players.get(nc.actGame.players.indexOf(new Player(Integer.parseInt(cmd[1]))));
newChatEntry(cmd[2] , sender.fraction , cmd[3] , nc.readyDialog.chatPane);
} else if(nc.ng != null) { // jesli w grze
Player sender = (Player)nc.actGame.players.get(nc.actGame.players.indexOf(new Player(Integer.parseInt(cmd[1]))));
newChatEntry(cmd[2] , sender.fraction , cmd[3] , nc.ng.inGameChatPane);
} else if(cmd[0].equals("UPDATELOGGEDPLAYERSLIST")) {
nc.sendText("OK" , nc.serverCon , false);
nc.serverCon.configureBlocking(true);
ObjectInputStream ois = new ObjectInputStream(nc.serverCon.socket().getInputStream());
DefaultListModel players = (DefaultListModel)ois.readObject();
nc.chooseGameDialog.updateLoggedPlayersList(players);
} catch(IndexOutOfBoundsException e) {
System.out.println(e);
} catch(IOException e) {
System.out.println(e);
} catch(ClassNotFoundException e) {
System.out.println(e);
}And two methods I used in codes above: sendText(String text , SocketChannel sc) and readText(SocketChannel sc) - they are my "utility" methods, which I use to send and receive Strings through specified SocketChannels.
boolean sendText(String text , SocketChannel sc) {
ByteBuffer bbuf = ByteBuffer.allocate(BSIZE);
boolean sendRetry;
boolean sent = false;
do {
sendRetry = false;
try {
StringBuffer cmd = new StringBuffer();
cmd.setLength(0);
if(text.length()+4 < 100)
cmd.append("0");
if(text.length()+4 < 10)
cmd.append("0");
cmd.append(Integer.toString(text.length()+4) + "�");
cmd.append(text);
cmd.append("\n");
bbuf = charset.encode(CharBuffer.wrap(cmd));
sc.write(bbuf);
bbuf.clear();
int n = sc.read(bbuf);
if(n == 1) {
bbuf.flip();
Byte re = bbuf.get();
if(re == 1) {
sendRetry = true;
} else {
sent = true;
} catch(Exception e) {
findAndDisconnectPlayer(sc);
try {
sc.close();
} catch(IOException f) {
f.printStackTrace();
return false;
} while(!sent && sendRetry);
return true;
String readText(SocketChannel sc) {
ByteBuffer bbuf = ByteBuffer.allocate(BSIZE);
int readRetryCount = -1;
boolean readRetry;
do {
readRetry = false;
readRetryCount++;
StringBuffer cmd = new StringBuffer();
cmd.setLength(0);
bbuf.clear();
try {
readLoop:
while(true) {
int n = sc.read(bbuf);
if(n > 0) {
bbuf.flip();
CharBuffer cbuf = charset.decode(bbuf);
while(cbuf.hasRemaining()) {
char c = cbuf.get();
if(c == '\r' || c == '\n') break readLoop;
cmd.append(c);
} else break;
statusArea.append(Thread.currentThread().getId() + " readText() odczytuje: " + cmd.toString() + "\n");
if(cmd.length() < 3 || Integer.parseInt(cmd.substring(0 , 3)) != cmd.length()) {
sc.write(ByteBuffer.wrap(new byte[] {1}));
readRetry = true;
} else {
sc.write(ByteBuffer.wrap(new byte[] {0})); // length OK
return cmd.toString().substring(4 , cmd.toString().length());
} catch(Exception e) {
findAndDisconnectPlayer(sc);
try {
sc.close();
} catch(IOException f) {
f.printStackTrace();
return "ERROR";
} while(readRetry && readRetryCount < 3);
findAndDisconnectPlayer(sc);
try {
sc.close();
} catch(IOException e) {
e.printStackTrace();
return "ERROR";
}Edited by: Kakalec on Jul 23, 2008 11:04 AMYou seem to be using a horrendous mixture of PrintWriters, BufferedReaders, ObjectOutputStreams, and no doubt ObjectInputStreams. You can't do that.
Some rules about this:
(a) Whenever you use a stream or reader or writer on a socket, you must allocate it once for the life of the socket, not every time you want to do an I/O.
There are many reasons for this including losing buffered data in the old stream and auto-closure of the socket on garbage-collection of the old stream.
(b) You can't mix stream types on the same socket. (i) If you're writing objects, use an ObjectOutputStream, you must read with an ObjectInputStream, and you can't read or write anything that isn't supported by the API of ObjectOutputStream. (ii) If you're writing lines, use a BufferedWriter and a BufferedReader at the other end. If you're writing characters, use a Writer and a Reader. (iii) If you're writing primitive data or UTF strings, use a DataOutputStream and a DataInputStream. (iv) If you're writing bytes, use DataOutputStream and a DataInputStream or an OutputStream and an InputStream. You can't mix (i), (ii), (iii), and (iv).
(c) Don't use PrintWriter or PrintStream over the network. They swallow exceptions that you need to know about. They are for writing to the console, or log files, where you don't really care about exceptions.
(d) Call flush() before reading.
(e) Always close the 'outermost' output stream or writer of a socket, never the input stream or the socket itself. Closing any of these closes the socket and therefore makes the other stream unusable, but only closing the output stream/writer will flush it. -
Force a multi-threaded client to use more than one proxy.
I have a multi-threaded client app. that I'm using to test our proxy throughput. I've run into the same problem I've seen other people run into where the client application threads all get sent via the same proxy (in my case, I have 16 proxies available and configured in the client config.)
Now I've seen threads like this one: Re: How to dynamically connect Extend client to proxy server?
I just wondered, has a solution appeared since that time? I guess Coherence 3.6 and 3.7 have appeared in the interim. I'm on 3.6.1.4.
My "Coherence specific" code is all localised in each thread and nothing is shared, so I guess the behaviour I'm seeing is something to do with the way Coherence initialises it's client classes within the JVM, rather than something it defers until a cache connection is established.
Any solutions to this problem, so I can get my multi-threaded client (where each thread opens a NamedCache connection and then establishes a CQC against it) to use all (or at least more) of the available 16 proxies?
Cheers,
SteveI have a multi-threaded client app. that I'm using to test our proxy throughput. I've run into the same problem I've seen other people run into where the client application threads all get sent via the same proxy (in my case, I have 16 proxies available and configured in the client config.)
Now I've seen threads like this one: Re: How to dynamically connect Extend client to proxy server?
I just wondered, has a solution appeared since that time? I guess Coherence 3.6 and 3.7 have appeared in the interim. I'm on 3.6.1.4.
My "Coherence specific" code is all localised in each thread and nothing is shared, so I guess the behaviour I'm seeing is something to do with the way Coherence initialises it's client classes within the JVM, rather than something it defers until a cache connection is established.
Any solutions to this problem, so I can get my multi-threaded client (where each thread opens a NamedCache connection and then establishes a CQC against it) to use all (or at least more) of the available 16 proxies?
Cheers,
Steve -
It seems that no browser will work. Firefox is my preferred browser but IE wont work either unless I use the restore function and then they work fine. However if I close my computer down for any reason they wont work and again I have to use the restore function. My email program works just fine (I use Agent) my ISP says there is no problem with my connection. My Firefox on my laptop works just fine and it uses the same connection as my desktop where the problem is.
This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore
See also:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]] -
HT201303 I dont know what is the problem to bye some thing frome some games
I dont know what is the problem to bye some thing frome some games
I don't know either, more information would be helpful.
-
Looking for someone good at building flash games using stratus
if you know how to take a flash game and turn it into multiplayer with stratus, we have a small hack we want to discuss, pls reply
thanksMany persons buy used items on Craig's List or eBay, however, sometimes they are selling stopen iPads. If there are problems with a purchase you can get a refund on eBay. Make sure when you purchase a used iPad that it has been "wiped clean" and reset to factory settings.
Below are some places wher you can sell used iPads. The sources also sell used iPads.
Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
Sell Electronics for Cash - Next Worth http://www.nextworth.com/
Buy My Tronics http://www.buymytronics.com/
Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
Totem http://www.hellototem.com/
Cheers, Tom -
Having problems attaching a transcript to a Video clip using Adobe Story and Prelude.
The company I work for is about to begin editing a documentary with several large interviews so we thought attaching the interview transcripts to the video clips would improve our workflow. Today we began testing the process with some of our old media and transcripts. We are able to attach the transcript we created in Adobe story Script to the video clip in prelude as well as run the speech analysis command. But the problem is that the speech analysis completely ignores/changes the transcript we attached to the video file and creates its own (incorrect) transcript, with at best only a string of a few words matching the audio and the rest is jibberish created by the program.
I was under the impression that the program would match as many key words as possible and then kind of fill in the blanks with the provided transcript but it is actually creating its own transcript. Is this how the program works or am I missing a step or two? Any help and suggestions would be greatly appreciated.It seems that the Clip metadata has the script info because you are able to see the 'Shot Location' field populated by the Scene heading info.
In the Dynamic Media section of the metadata panel where you see the Shot location field, if you scroll down, you would see the 'Script' section, you would be able to see the 'Dialog' metadata embedded there. This is important, please do check and let me know.
About how this works: "Speech Analysis engine uses the Adobe Story script as a reference script. When Adobe Premiere Pro finds enough matches with the embedded script, it replaces the analyzed speech text with the embedded script text. Adobe Premiere Pro carries over the correct spelling, proper names, and punctuation from the reference script, benefits that standard speech analysis cannot provide."
FInd more info here > http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d0fa .html
Having said so please note that the quality of the speech analysis also depend on the clarity of the speaker, background noise in the footage and the quality of the recording.
Maybe you are looking for
-
Foreign key fields not getting populated in datacontrol palette for EJB app
Hi, I am quite new to ADF and EJB.I developed a jdeveloper application with JSF and EJB tiers.(I am using jdeveloper 10.1.3.5) For database the default HR database is used.I created the entities for the EMPLOYEES and DEPARTMENTS table. I also created
-
Hi, I have a web service in my BPM. This web service is an automated activity to send an e-mail based on user's decision. Everything works fine, except the e-mail is not triggered. I configured this e-mail using Logical Destination and when I tested
-
Can I ask InDesign to resample as it exports to PDF?
When I export an InDesign CS document to PDF I'd like to know what InDesign does to the images that it exports. InDesign Help, in this case, was no help. I'll give a preamble so you know what I'm on about. Originally when I first started this project
-
I have been working on a training project for a while. Last night things seemed to be fine as they have been for the couple of months I have been doing this. Today when I open the project and events, the clips from certain events are not showing up i
-
I I have changed my email address so I changed my Apple ID and password. Just realised haven't changed icloud details and now can't access as don't know password or security questions. Want to delete and set up on new Apple ID. Help please???