The question about "Merge"

I created a Sequences (24fps),Captured video and imported audio files.After set inport,I used the command "merge".But that merged clip's inport presented offset--video's inport and audio's inport are not superposed. that's Why?
waiting your answer.
ps: video have been conformed.

Is there a way to merge the 12 movies into one?)
Import them into iMovie HD and build a sequence with chapter markers.
What determines the order in which the movies are being played?
Sequence of you adding them to the main menu.
tried to view it on a Windows computer
Seen many problems on Windoze computers. Does it work on your Mac?

Similar Messages

I want to ask the question about phasor measurement.

I want to ask the question about phasor measurement.the first one is that how can I accomplish the sychronized sampling with GPS?The other question is that how can I adjust the sampling rate for DAQ when the system frequency alter continuously.(if I used the DFT,due to the altering of frequency,I can't get the completed waveform)"

Synchronising DAQ with GPS depends on the DAQ sampling rate. If the rate is higher than 2 Hz you can sample the 1PPS pulse of your GPS receiver together with your data.
You change the sampling rate with the AI Clock Config.vi. You cannot do this on the fly so you must stop DAQ with AI Control.vi reconfigure the sampling rate and then start it again.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Check exception list of your Firefox password Manager and check if your site is there or not?
* http://kb.mozillazine.org/User_name_and_password_not_remembered#Password_Manager_settings

HT5312 In itune I need to fill up the questions about card but i dont have credit card,what can i do?

In itunes i need to fill up the questions about card but i dont have a credit card, what can i do about that?

Hi Huyen1110,
You can use the steps in this article to create an iTunes Store account that does not use a credit or debit card for payment -
Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

The question about parameter in ECC 6.0 system.

hi
T-code RZ10 , I checked the parameters about DEFAULT.
but there are one error and three Warns.
---one error
     there is [E:j2ee/dbname changes not permitted]   below the parameter of j2ee/dbname.
     PS: the background is red.
---three warns
     j2ee/scs/host
     W: Unknown parameter j2ee/scs/host , a check cannot be performed
     j2ee/scs/system
     W: Unknown parameter j2ee/scs/system , a check cannot be performed
     j2ee/ms/port
     W: Unknown parameter j2ee/ms/port , a check cannot be performed
     PS: the three parameters are not in T-code RZ11.
could you help me solution these question.
thanks and regards

hi,MIchael
   ---one error
        there is E:j2ee/dbname changes not permitted below the parameter of j2ee/dbname.
        solution:
                  the value of j2ee/dbname was BS2.   just now, i deleted the value of j2ee/dbname.
                 the error message does not come out,now.
   ---three warns
       j2ee/scs/host
       j2ee/scs/system
      j2ee/ms/port
    solution:
              there is not the scs in the system. but there is the ms in system.
              why they are specified , i dont konw.
              if those parameter doesn't exist, would i be going to delete those parameter.
    thanks and regards.
    chu

The question about the sharepoint server 2010 install

Hi Friends,
i have a question about the sharepoint server 2010 install.
my computer is used the windows server 2008 service pack 1. in order to install the sharepoint 2010 server, i need to choose to windows server 2008 service pack 2. my question is when i install the windows server 2008 service pack 2,whether the inside
of my computer information will be lost or change?
thank you in advance.
Qearl

Hi ,
No data will be lost either from your Windows program files or other drives as long as it is an upgrade.
After upgrade you will still be able to see your old program files under windows.ol folder in the C: Drive of the new OS.
The data will be lost only when you perform a clean install like complete formatting the HArd disk and installing from scratch.
As mentioned it always good to maintain a backup preferable important files in a skydrive as there is a good chance of external drives crashing.

The question about portlet customization and synchronization

I have a question about portlet customization and synchronization.
When I call
NameValuePersonalizationObject data = (NameValuePersonalizationObject) PortletRendererUtil.getEditData(portletRenderRequest);
portletRenderRequest.setPortletTitle(str);
portletRenderRequest.putString(aKey, aValue);
PortletRendererUtil.submitEditData(portletRenderRequest, data);
Should I make any synchronization myself (use "synchronized" blocks or something else) or this procedure is made thread-safe on the level of the Portal API?

HI Dimitry,
I dont think you have to synchronize the block. i guess the code is synchronized internally.
regards,
Harsha

Answers of the questions about verification ID? I can't remembered!

I can't remember the answers of questions about verification Id and now I can't down more music.

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

The question about EDI in scenario 'Cross-Company Code Sales Processing'?

I'm doing the exercise with IDES system for the scenario 'Cross-Company Code Sales Processing'.
But when posting the EDI, it gave me the error as followings:
there are related data in table EDPP1, including customer and vendor data, but it still informed me the questions.
pls help!
Object 0090033869
Output type: tst IV for MM by ken
Processing log for program RSNASTED routine EDI_PROCESSING
EDI: Partner profile not available
EDI: Partner profile not available
    Message no. E0332
Diagnosis
    A partner profile could not be found with the following key:
    /0000000000/LI/
    This involves the key fields of the table EDPP1:
    -PARNUM partner number
    -PARTYP partner type
Procedure
    Please check the EDI partner profiles.
    Execute function

Hi
Partner profile is not seems to be maintained in tcode WE20.
Please maintain in WE20.
Kind Regards
sandeep

The question about vlan,acl of SWR224P

i find a strange thing.when i configure vlan,i find i can not write the english word in the "VLAN Name "
if i do,when i reboot this machine,the configration about vlan will bo lost??????????so,is there anybody can tell
me why.....
another problem,when i configure the ip acl,for example, Source IP Address1.1.0.0 Wildcard Mask0.0.7.255
destination any ,protocal any
but it tell me the date is wrong.so is the format i configure wrong.
thank you........body

hi,
I also tried to configure VLAN for my switch, you may check on this link on how to create VLAN. This link is for SRW224G4P but it might work on your SRW224P
http://kb.linksys.com/16824;
Another thing to consider is the fimware of your switch, check the version of the firmware and if it's a lower version you may update it.
Regarding your second inquiry about ACL, you may try to reconfiguring your ACL again once you updated the firmware.

The question about AppStore

When I buy something asked me the question I dont know why I want to change the question or I've forgotten the question this is in AppStore

Rescue email address and how to reset Apple ID security questions

The question about the callbackdata parameter in the function PostDeferredCallToThread()

I find if using a local variable to pass to the PostDeferredCallToThread(), then in the callback function, it cannot be recevied correctly. But as NI document said, this variable is a user-defined, will avoid declaring the data object as a global variable. how to interpret the question?
David

If you provide a pointer to the function the variable pointed by the pointer must be still in memory if you want to access it from that thread function.
One way of keeping the variable "alive" when you leave the scope of a function is to define it as static.
Dynamically allocated memory (malloc/calloc) is also accessible if not freed.
Suggested reading:
http://gribblelab.org/CBootcamp/7_Memory_Stack_vs_Heap.html
S. Eren BALCI
www.aselsan.com.tr

The Question about stock transfer between HU-Management and WM-Management

Hi,
There is a scenario about stock transfer between HU-Management and WM-Management storage location. I use transaction MB1B , movement type 313 , 315. After Good issue from WM-management storage location, outbound delivery will genarated, then Pack, Create/Confirm TO, at last post goods issue for the outboud delivery. But when i do movement type 315, there is a warning message "Data of preceding document was not transmitted", and from the F1 help i find this system reponse "You can maintain an indicator that makes information about preceding documents in this delivery available under delivery type in Customizing. For some characteristics of this indicator, the type of preceding document and the related document and item numbers must be transmitted to delivery creation. At least one of these parameters is missing.".
So, My questions are:
1. Generallily, Outbound delivery is created by SO, inbound delivery is created referenc PO, but how the stock transfer for 2 steps generate the outbould delivery and inbound delivery? Could you pls tell me the where i can config this in the IMG?
2. What's "Data of preceding document was not transmitted" mean ? how to fix this issue ?
Best Regards
Boxer Du
I am the SAP fans, focus on MM and WM. I am interesting TRM Yard Management and Cross Docking now.Very Gladly to talk you about these areas. I want to exchange the knowledge with you, and want to be a good friend of you. Pls contact me. You can find My MSN in the profile. Thanks.

Hi,
Sure, The inbound delivery type is set up in the IMG->Logistics General -> HU management -> Basics ->Delivery type -> Delivery type determination.
For Inbound delivery type 'HID' is maintained in this view.
Best Regards.
Some One want to discuss the details , can contact me. Thanks.

The question about the HA installation on ECC6.0

Hi Experts,
We are about to implement a project with HA environment on the ECC6.0 in the near future, which is just about the ABAP stack. After reading the Installating Guide, I stil have several questions related to the procedures of HA installation.
In the guide document, I got the following steps to process for realizing the HA of ECC6.0:
1. Run SAPinst to install the central services instance (ASCS) using the virtual host name on the primary cluster node, host A.
2. Prepare the standby node, host B, making sure that it meets the hardware and software requirements and it has all the necessary file systems, mount points, and (if required) Network File System (NFS), as described in Preparing for Switchover .
3. Set up the user environment on the standby node, host B. For more information, see Creating Operating System Users and Groups Manually. Make sure thatyou use the same user and group IDs as on the primary node. Create the home directories of users and copy all files from the home directory of the primary node.
4. Configure the switchover software and test that switchover functions correctly.
5. Install the database instance on the primary node, host A.
6. Install the central instance with SAPinst on the primary node, host A.
7.If required, install additional dialog instances with SAPinst to replicate the SAP system services that are not a SPOF. These nodes do not need to be part of the cluster.
My Question is that does standby node(host B in above context) need to install the ASCS, database instance and Central Instance?
If host B does not need to install the database instance, how about the whole system would be when the primary cluster node (Host A in above context) totally crash, such as power failure.

Hi Rong,
I would try to explain it in simple words...
My Question is that does standby node(host B in above context) need to install the ASCS,
database instance and Central Instance?
If host B does not need to install the database instance, how about the whole system would be when
the primary cluster node (Host A in above context) totally crash, such as power failure.
1. You don't need to install ASCS on Node B. You are installing it using a VIRTUAL HOSTNAME which represent cluster not individual node. VIRTUAL HOSTNAME is assigned to cluster package, so whichever Node is the owner of the package, will have the VIRTUAL HOSTNAME. (it will switch with cluster switchover)
2. It is actually a cluster package configuration magic. When Node A is active, cluster package owner is Node A. So all mount points (which is on SAN disk) is mounted on Node A. When you switchover the cluster, those packages will be mounted on Node B.
Some time single cluster package is used (which includes mount points for SAP instance + Database directories). You can also use 2 cluster package seperating SAP and Database directory structure.
Only OS related directories should be on servers local disk. All other application related mount points should be on SAN disk which is configured in "Cluster Package". (For example /sapmnt, /usr/sap, /oracle etc.)
You only need identical users and their enviornment settings on both Nodes.
In simple words, When primary node fails or crashed only users and thier enviornment setting will be lost. On second node, because of identical users and their profiles, same settings will be available to bring up the SAP system. Your all SAP and Database data is intact as it is on SAN Disk.
I hope, your confusion is cleared now...
Regards.
Rajesh Narkhede

The question about Interface Mapping in BPM

Hello,
I am a few confused about an Interface Mapping in BPM at the Design step.
I have a task to transmit and trasform two messages of two sender file adapter to two IDOCs messages and then to send them to SAP system.
I use BPM.
But I don't understand what types of message interfaces should I use for source and target interfaces in Interface Mapping? As to the target interface I understand it must be abstract but which of interfaces exactly?
Actually there are some questions here:
1) If the source interface should be abstract or real in Interface Mapping?
2) If the target interface should be the abstract interface of Receive Step object or the abstract interface of Send Step object?
3) And what the message types should I use for the source and target message interfaces in Interface Mapping? If I understand correctly that these message types

hi igor,
you have to import the IDOC Types under the imported objects in the integration repository objects,
what are all the data that coming out from the file adapter, you design the datatype.
the target IDOC should be real and you do the mapping for the all necessary fields.
refer: --
File to IDOC:
Re: how to Sending XML data to idoc
IDOC Mapping:
http://help.sap.com/saphelp_crm40/helpdata/en/77/a1d48b1ce06d40932e0a26f3c117ce/frameset.htm

The question about "Merge"

Similar Messages

Maybe you are looking for