The SAPinst GUI could not be started because a Java Runtime Environment

Hi all,
I AM TRYING TO INSTALL THE ECC 6.0 ON HPUX AND WHILE STARTING SAPINST GETTING THIS ERROR:
The SAPinst GUI could not be started because a Java Runtime Environment (JRE) could not be found.
Either the JRE is not installed correctly or the environment variable SAPINST_JRE_HOME is not set to the JRE installation home.
Be aware the SAPinst server is still running! You need to start SAPinst GUI standalone on this or another host as described in the installation guide.
103 controller.errorStartingGuiUnix  1697
Please help

Can you do a
java -version
as root?
Did you install the Java runtime from http://www.hp.com/go/java for your platform?
Markus

Similar Messages

  • The server process could not be started because the configured identity is incorrect

    Good morning
    I have the same problem as here, every moning i must writing pasword.
    https://social.msdn.microsoft.com/Forums/en-US/f95ee480-dda1-42fd-96af-596531e7ac2e/the-server-process-could-not-be-started-because-the-configured-identity-is-incorrect?forum=windowstransactionsprogramming
    But my configuration is the same as was answer in this post, may be you can help me with another idea?. Thanks.
    Windows 2008 R2 64Bit

    Both machines start with an automatic login so technically there is an interactive user.
    Nevertheless, it is an interesting point. i will try to configure the applications to run under a particular user and see if that changes anything.
    Thank you
    Peter

  • Virtual Machine could not be started because the hypervisor is not running

    Hi
    I have installed Windows Server 2012 Standard Edition with a GUI. Default configuration, nothing special.
    Whenever I want to turn on any machine inside of Hyper-V, the following error message appears:
    "Virtual Machine could not be started because the hypervisor is not running"
    Whenever this happens, I run the following command:
    bcdedit /set hypervisorlaunchtype Auto
    and reboot the Server. After a reboot, all Virtual Machines can be started without Problems. However, as soon as I shut down the Server instead of rebooting it, the Problem happens again and I need to enter the command again and reboot.
    Now my question is how to solve this Problem. I never had this Issue with Windows Server 2008 R2, maybe there are some differences regarding the Hypervisor in Server 2012. How can I make sure the Hypervisor is always on, even after a Shutdown? Thanks in
    Advance

    Hi,
    Please check whether you have event log with ID 3112.
    Hyper-V requires hardware support, including: an x64 CPU; VT (Intel) or AMD-V (AMD) hardware extensions; No eXecute (NX)/eXecute Disable (XD) and full BIOS support for hardware virtualization.
    Check if the computer meets the hardware requirements, use the appropriate utility for your CPU manufacturer.
    If the computer meets the requirements for Microsoft virtualization software, see the video titled
    Hypervisor is not running error: How to fix
    , which demonstrates how to change the system BIOS on a computer to enable support for virtualization. Make sure DEP and CPU virtualization is enabled in BIOS. (http://go.microsoft.com/fwlink/?LinkId=163578
    Also, check that
    Boot Configuration Data (BCD) store is set to start the hypervisor, and then restart your physical computer.
    The BCD store contains boot configuration parameters and controls how the operating system is started in Windows Vista and Windows Server 2008 operating systems. These parameters were previously in the Boot.ini file (in BIOS-based operating
    systems) or in the nonvolatile RAM (NVRAM) entries (in Extensible Firmware Interface-based operating systems).
    You can use the Bcdedit.exe command-line tool to update BCD store with the correct launch options as referenced in the error, and then restart the server. Bcdedit.exe is located in the \Windows\System32 directory by default.
    For more information please refer to following MS articles:
    Event ID 3112 — Hypervisor Operation
    http://technet.microsoft.com/en-us/library/dd581879(v=ws.10).aspx
    You receive the error message "virtual machine could not start because the hypervisor is not running" in Windows Server 2008 or Windows Server 2008 R2
    http://support.microsoft.com/kb/2490458
    Troubleshooting Event ID 3112 "The virtual machine could not be started because the hypervisor is not running."
    http://social.technet.microsoft.com/wiki/contents/articles/194.hyper-v-troubleshooting-event-id-3112-the-virtual-machine-could-not-be-started-because-the-hypervisor-is-not-running.aspx
    Lawrence
    TechNet Community Support

  • Virtual machine could not be started because hypervisor is not running

    I am having trouble starting a VM.  I am suspecting that it might be due to my hardware.  I have a Dell Optiplex 755 A09.  Processor is Intel Duo Core E4500 @2.2Ghz Hyperthreading = No and 2 mb cache.  I had this computer given to me, but would like to run Hypervisor on it if possible.  Can the processor be upgraded, if so, what would I have to purchase in order to make hypervisor work? 

    I m using HP Prolient BL460C Blade Server with Intel Xeon(R) E 5450 @3.00 GHz.
    and facing problem with the error "the
    virtual machine could not be started because the hypervisor is not running"
    I tried following in BIOS:
        - No-Execute Memory Protection - Enabled
        - Intel Virtualization Technology - Enabled
    but I get Blue Screen, after that I came through link below to change the registry setting mentioned by Rajiv as above, and thx to him I did not face  Blue Screen after that...(Dont really know what Blue Screen has to do with Hibernate/sleep mode)
    http://www.computers.nepalesemap.com/index.php?topic=1554.0
    I shutdown and cold-booted the server properly.
    But still I am still at the same point "the
    virtual machine could not be started because the hypervisor is not running"
    Some
    more suggestions ?
    Warm
    Regards

  • Win8 Pro Hyper-V Error : Virtual machine could not be started because the hypervisor is not running

    Hello,
    Recently in Dec I bought a new desktop PC.
    HP ENVY Desktop h8-1420t
    CPU & ChipSet:   Intel Core i7    Intel Z75
    I have Windows 8 Pro and installed Hyper V but cannot start the virtual machines. I get the following error message: Virtual machine 'zzzz' could not be started because the hypervisor is not running
    I followed these steps to enable Hyper-V:
    1. Upgraded to Windows 8 Pro
    2. Tried to add Hyper-V feature but Hyper-V Platform was grayed out
    3. Enabled Virtualization in the BIOS - security configuarion
    4. Cold booted Computer
    5. Added the Hyper-V Platform Feature
    6. During the restart machine was in forever state spinnign state, did a manual reboot
    7. Disabled Virtualization in the BIOS again
    8. Successfully Re-Booted the Computer now Hyper V manager was available
    9. Configured Hyper V network to use external network
    10. Created a new VM through the Hyper-V Manager
    12. Tried to boot up teh newly Created VM and I get this error message:
    Virtual machine 'zzzz' could not be started because the hypervisor is not running
    Any solutions for the error I am seeing above?
    Similar problems are discussed here:
    http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/Cannot-boot-if-HP-ENVY-Bios-Virtualizatio...
    Thanks!!

    Same Problem Here - did you discover any answers?  I may have to return the system if it can't do hyper-v

  • The iPod "iPod" could not be restored because it is busy

    My 20g ipod started giving me trouble a few weeks ago after I loaded some post-Christmas purchases. It wouldn't load the last few songs, and it was half-empty, so capacity wasn't an issue.
    I next tried to restore the iPod, but my mac mini then seized up, and the restart hung, so I had to do a hard restart.
    Upon restart, the iPod was obviously now corrupted, with only a half-completed restore, so I tried again.
    This time, and every time since, I get the following error message: The iPod "iPod" could not be restored because it is busy
    So, I next followed the 5 R's, to no avail.
    Disk Utility gives me the error Disk Erase failed Disk Erase failed with the error: Input/Output error
    I also tried security erase, and while it starts with the overwrite, it eventually kicks out of the process with another I/O error.
    Today, I downloaded iTunes 7.6 with the hope that it would fix this issue, as it has been surfacing in discussions pretty commonly. I thought this was reasonable, because of some difficulties with iTunes after the release of the iPhone were solved upon the next release of iTunes.
    Unfortunately, I am facing the exact same situation.
    There is one additional step I was able to take by trial and error, and one further step I am considering.
    When I originally searched this topic, I came upon a "diagnostic mode" fix that's supposed to be accessed only by the iPod nano.
    Using this mode, I was able to run several tests, and ram checks out, and one of the two disk tests come back fine.
    Since I don't know what the alphabet test results mean, this was about all I was able to gather.
    I attemmpted to use the diagnostic mode reset, but the problem continued.
    My final thought, aside from waiting for a further iTunes update, was to dig out a third-party disk utility I have here somewhere and see if that will erase the iPod.
    Any suggestions out there?

    I was able to solve this by (warning, this will void your warranty) taking the iPod apart, very carefully. Being careful not to separate the cables inside, place a folded business card on the hard disk, and place the metal half back on.
    Do a Google search if you don't believe me.
    Oh, and for the gent from Apple that removed the post containing URL with pictures of this fix, I do NOT receive any cash, complensation, self esteem or other recompense or good feeling from posting this fix, or directing people to search for it.

  • Error msg when I compact: The folder 'Inbox' could not be compacted because writing to folder failed. Verify you have enough disk space, and have write privileg

    I recently had my computer serviced. I re-downloaded Thunderbird (getting a newer version), and retrieved my saved email. Now, Thunderbird keeps asking me to compact, but when I do, I get this error message:
    The folder 'Inbox' could not be compacted because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.
    Obviously, since I'm getting mail all the time, I have write privileges, and disk space. The question is whether there's a setting I need to specify, or whether Thunderbird is writing to a special partition that may have gotten write-protected when my computer was in the hospital - or whether this is related to a known bug.
    All help appreciated.

    The only know bug I can see is probably your anti virus is trying to scan the file when the new inbox is created leaving Thunderbird to think the file was not created.
    As an experimental / diagnostic process. Restart the machine in safe mode with networking using Microsoft instructions for [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7] then try the compact. If it works I was most likely right. If it does not, another idea must surface.

  • The OracleXETNSListener service could not be started.

    I have just installed OracleXE but the listener wont start. This is the message I get when trying to start the server:
    C:\SVV\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
    The OracleXETNSListener service is starting.
    The OracleXETNSListener service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    C:\SVV\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    C:\SVV\oraclexe\app\oracle\product\10.2.0\server\BIN>
    Any good ideas??

    Hi Jer
    There is no listener.log in that folder, I assume it is because it is initialized the first time the listener starts. The only file in the directory is sqlnet.log, it contains this information:
    Fatal NI connect error 12641, connecting to:
    (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
    Time: 05-SEP-2006 16:32:13
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12641
    TNS-12641: Authentication service failed to initialize
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
    Also after reading a lot of posts on this forum, I have tried to write:
    C:\>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-SEP-2006 08:02
    :13
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Message 1053 not found; No message file for product=NETWORK, facility=TNSTNS-125
    57: Message 12557 not found; No message file for product=NETWORK, facility=TNS
    TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
    TNS-00527: Message 527 not found; No message file for product=NETWORK, facility=TNS
    Maybe this can cast some more light on the situation??

  • Sync problems with iOS5. "The iPhone "iPhone" could not be synced because the sync session failed to finish."

    Hi,
    I have updated my iPhone 3GS 32GB to iOS5 and iTunes to version 10.5.
    All music, videos and ringtones purchased were deleted on the device and now it is impossible at all to sync the iPhone with the computer, both by USB and Wi Fi.
    It always appears at step 5 of the syncronization the message:
        "The iPhone “iPhone” could not be synced because the sync session failed to finish."
    Has anyone experienced the same problem and has found the solution or we have to wait a bug fix from Apple?
    Thanks.

    Just made one very simple move without having to restore iPhone or reinstall iTunes..
    1st step:http://support.apple.com/kb/TS1538 *Read 'in my case' in here first before following this link*
    Follow that link to restart (or if necessary) reinstall your Apple mobile device support.
    In my case, Leave iPhone connected all the way. I first exit iTunes. Then i stopped the Apple Mobile device support (by following a part on that link above in step 1) which Effectively made my iPhone undetectable on itunes but discoverable by windows as a 'camera device'. Then while device is still connected, i started the Apple mobile dev support again. Now i open itunes and there my iPhone re-appears.
    2nd step: After your iphone re-appears on iTunes, press Sync and all is well...
    P.S, Mine is iPhone 4 running on iOS 5, iTunes 10.5, Windows 7..

  • My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5.  I keep getting this message:  The Adobe Updater could not be started.  Please reinstall the application and components.

    My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5.  I keep getting this message:  The Adobe Updater could not be started.  Please reinstall the application and components.
    I need to take care of this. I have reinstalled it 3 times and still get the same message.
    Any suggestions?

    Firefox is trying to update but it can't because Firefox is running
    Open the task manager with Ctrl + Alt + delete. Click on the Processes tab and find firefox.exe. Click End process

  • Setup could not be started because of unexpected error

    Have tried to load icloud several times.  I Keep getting error that "setup could not be started because of unexpected error.  Can anyone help?  Thanks.

    You need to leave more information like what is the ios5 device. I following instructions accidently set up two iclouds and then I couldn't get the contacts in. My mobileme email isn't going to work anymore because I set up an icloud using my store apple ID. Apparently the term apple ID can refer to any apple product ID that you make up not the one you use in the store. So you need to leave more infor on what is your problem to figure out how to help.
    GR

  • ORA-20001: The printing engine could not be reached because either the URL

    Hi all,
    created a report and tried to have a pdf report
    using this link
    http://www.oracle.com/technology/obe/apex/apex31nf/apex31rpt.htm
    when i did a sample with apex.oracle.com
    it is working fine.
    but in my site
    when i click the print button i am getting an error
    <div id="report_4897903101326173_catch"></div><pre>report error:
    ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.</pre>
    Using : Oracle-Application-Server-10g/9.0.4.0.0 .
    Oracle-HTTP-Server.
    I am working on Remote server. How to find whether the printserver is configured or not?
    Is there any query to check it out?
    can any one please help? I really need to get this work.
    bye
    Srikavi

    hi guys . i have the same problem and i dont know how to fix it . I use APEX on my PC and i just install BI Publisher 10.1.3.2.1 and made the settings in APEX as follows:
    Print Server : Advanced (requires BI Publ...)
    Print Server Protocol: HTTP
    Print Server Host Address: http://192.168.1.2/ ---> IS THIS MY HOST ? when i start the BI Publisher Server the address is" http://192.168.1.2:9704/xmlpserver"
    Print Server Port :9704
    Print Server Script: /xmlpserver/convert
    Now when i click PRINT and choose to open or save it on my pc inside the document ( word/html ) it gives me error "ORA-20001: The printing engine could not be reached because either...".if its PDF i can open it becouse of some problem.Sorry for my english i hope you uderstand what im trying to say.thx in advance

  • The application "FreeHand" could not be launched because of a shared librar

    Suddenly I can not launch FreeHand 10
    I get:
    The application "FreeHand" could not be launched because of a shared library error: "5<FreeHand X><FreeHand X><PowerPlant Shared Library>"
    Only thing I can think of that is different now than last time I used FH is I activated iWork Pages
    The solution would be great, as would tips on how/where I can go discover the solution without having to ask someone to help me - can't figure out how to get mac's help to point me to solution
    I have repaired permissions
    thanks

    Hi, Robert.
    Here is some general advice on troubleshooting shared library errors. In your case, I suspect points 1 and 2 below apply as it looks like the shared library error in this case is citing only Freehand-related components (a check on the Adobe site indicates the PowerPlant Shared Library is part of Freehand).
    A shared library error, in general terms, implies a missing, corrupted, or incompatible application or operating system framework. Details on frameworks and shared libraries (heavy technical reading) can be found in the "Frameworks" section of the "Software Development Overview" chapter of the Apple Developer Connection document Mac OS X Technology Overview, and the Framework Programming Guide.
    Causes for shared library errors include:
    • The affected application has been corrupted and must be reinstalled.
    • The affected application is incompatible with the version of Mac OS X you are using, or depends upon another application or operating system component which is either corrupted or incompatible with the affected application.
    • Running incompatible versions of two applications with interdependent shared libraries.
    • Disk directory or permission corruption.
    • Corrupted operating system installation.
    To resolve shared library errors:
    1. As a start, perform a general checkup by running the Procedure in my Resolving Disk, Permission, and Cache Corruption FAQ. Directory corruption can result in a shared library being seen as "missing."
    2. If the problem persists, and only one application is affected, uninstall, then reinstall the affected application. See my "Uninstalling applications" FAQ for important advice on uninstalling software.
    3. Assure that the version of Mac OS X you are using is compatible with the system requirements of the affected application. The system requirements for an application can usually be determined by consulting either its documentation, the developer's Web site, or by contacting the developer.
    4. Assure you are running either the latest versions or compatible versions — as specified in the system requirements of the affected application — of other applications, if any, cited in error messages concerning the shared library error. Error messages concerning the shared library error may be displayed in alert dialogs or may appear in Console logs. In particular, check these of these Console logs for specific messages citiing the shared library error and the affected application. Applications cited in the error message, other than the affected application, indicate that the affected application depends upon a shared library provided by these other applications.• Assure you are running the correct, compatible versions of any applications, other than the affected applicaiton, cited in the error messages.
    • Reinstall any of the applications, other than the affected application, cited in the shared library error message.For example, the shared library error messageThe application "application_name" could not be launched because of a shared library error: "<<applicationname><Apple;Carbon;Multimedia><CFMPrivQuickTime>could imply that the installed version of QuickTime may either be corrupted or incompatible with the affected application due to the presence of CFMPriv_QuickTime in the message.
    5. If the problem persists, or the shared library in question is part of the operating system, reinstall Mac OS X using the Archive and Install process. See my "General advice on performing an Archive and Install" FAQ.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

    I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
    "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
                  Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
    If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
    I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be  wonderful.
                 I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                      ThanQ SO very much!
                                                                             [email protected] or [email protected] or [email protected] .
                                                                                               You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                                that's my Facebook "handle".    ThanQ 4 taking the time 2 read all of this!
                                                                                                hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                                as marking this page in my FAVORITES so I can find it fast! Take Care!!!

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found.  Would you like to locate it now?"  It happens on all my tunes and each one I select ends up with a "?"

    I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found.  Would you like to locate it now?"  It happens on each tune I select and a "?" appears beside the song.  Does this sound familiar to anyone?

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

Maybe you are looking for