The screen goes black instead of turnin off
I have my screen set up to switch off after X minutes, and it is working fine, except it does not really shut downs. It just goes black, but the backlight is still working, while what I want is the result I get when I run
sleep 2 && xset dpms force off
I am using XFCE, xscreensaver and nvidia drivers.
Have exactly the same problem with my wife's MacBook Air. After restaring in Restore mode and trying to repair the disk (Disk Utility showed errors in the verification), the system tells me to backup as much data as possible (how?), re-format the disk and restore backed-up files. Error comes up when "updating boot support partitions for the volume as required".
Original restart action was done due to software update requesting it, if I remember correctly, iTunes was updated.
I don't want to start a painful back-up procedure (although I do regular back-ups): how should I know, where iPhoto stores it's data or where my mails are (yes, still using local mail)? How can I access the data if I can't boot?
My iMac's disk crashed also a couple of months ago and I'm still recovering. I have four Apple devices, two of them have failed. Can Apple afford such a ratio?
Similar Messages
-
So I have had this problem before, and know that you hold down the top Power button and the Home button, at the same time, for roughly 10 seconds, or until the apple logo comes on.
The problem is, when I press the buttons and the screen goes black, like it's supposed to before the logo pops up, the apple logo isn't appearing.
I was wondering if that's because my I pod touch was drained when I plugged it in to charge, and I tried to turn it on when it was still charging?
What can I do?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Just recently my ipod nano 4th generation's battery seems to be messed up? I plug it into the charger and the ipod says it's charged, but when I take it off the charger, the screen goes black. What is going on and how can I fix it? I'm really sad because it happened so suddenly.
Yes. The battery appears to be shot and in need of a replacement. This can either be done by Apple or a third party repair company.
http://www.apple.com/support/ipod/service/prices/
You can Google "iPod battery replacement" for third party service centers.
B-rock -
While browsing the internet with my iPhone 4S the screen goes black and it looks like it's turning off, but it pops up to the unlock keypad screen. It has plenty battery and I was wondering if it is an issue of using too much of the iPhones RAM or not. I have no other apps open besides Messages. I am getting kind of worried as it started around two weeks ago and it has gotten increasingly frequent.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these steps in order until the issue is resolved.
-
On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
While restoring my iPod Touch second generation computer is turned off the screen goes black what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPhone 4S will not stay on it shuts off and on by its self and when its on the screen goes black
My 4s iPhone when on the screen goes black and it shuts it's off and on by its self
Hi macee2011,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Cheers,
- Judy -
The video on my iPad 2 is frozen on a tv show, although it will play the tv show until the end. At the end, when I click 'done' the screen goes black so I can't see the other movies that I've downloaded. I've shut down a few times but it reverts to the same thing. How can I re-set the video feature or do what is necessary to get it working again?
Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears. -
Firefox comes on, I go to a site rich w/ visual content & then the screen goes black & then white w/ with a bubble from the bottom bar saying recovery from igfx display failure..this used to happen on my Chrome browser (the Chr browser recovered spontaneously But I removed & reset it... still the problem went on & I quit using Chr for2-3 mos. There never was a problem on Opera. Hey! OPERA rule. As foe IE 8. That instrument is completely useless. Even all areon IE appears to be dead...Thanx!
Try disabling hardware acceleration in Firefox.
https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardware-acceleration#w_turning-off-hardware-acceleration -
I haven't been able to find any answers that solve my problem. My Ipad will not leave the Apple logo. I hold both buttons and the screen goes black and then the Apple logo immediately pops back up. I can't get the red slider screen at all. No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.
Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
You should now be able to restore -
every time i click an action the screen goes black until i unclick. making it impossible to see my work. photoshop cc/ windows 8, every time i click an action the screen goes black until i unclick. making it impossible to see my work. photoshop cc/ windows 8
I've had the same problem, and sorted it using this:
Run the Boot Camp Assistant in OS X as normal and create a partition when asked, then insert your Windows 7 disc to reboot and begin the process proper.
Windows 7 requires the NTFS file system, so once in the installer just select your new partition (labelled BOOTCAMP), click on Drive options (Advanced) and choose to format it. Then select the newly formatted partition and continue.
Windows 7 will begin installing, and once it gets almost to the bottom of its checklist, it’ll try to reboot. Now, if you leave it here, you’ll get so far and see the black screen. Any further attempts to reboot will bring you to the same dead end.
Instead, restart and press a key to boot from the Windows 7 disc when prompted.
Rather than running the installation again, choose the little option at the bottom to Repair your computer. Decline any suggestions that pop up until you see a list of options with Command Prompt at the bottom. Choose that option.
At the Command Prompt, type DEL C:\WINDOWS\SYSTEM32\DRIVERS\ATIKMDAG.SYS to delete the default ATI driver, then close the window and reboot.
This time, Windows should successfully initialise a more appropriate display driver, allowing you into the desktop. From here insert your OS X disc to install the relevant hardware drivers as you normally would, then run Windows update to clear up any leftovers.
Read more: How to install Windows 7 on the new 27in iMac | PC Pro blog http://www.pcpro.co.uk/blogs/2009/10/26/how-to-install-windows-7-onto-the-new-27 in-imac/#ixzz0tinWW9tn -
I have a iPad, 32g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading apps, or trying to watch a YouTube video. I try to open safari or youtube again and it will often crash several times before it may or may not decide to load for me. It is extremely annoying and getting to the point where I can not use it
Standard troubleshooting steps in order are as follows:
Power the iPad off and on.
An iPad reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPad with iTunes from your iPad's backup.
Restore your iPad with iTunes as a new iPad or not from your iPad's backup.
If no change after the last step, your iPad has a hardware problem. -
When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??
One problem though, the top button on my phone is jammed so i cant power off the phone, anyway of resetting the phone without using the top button ?
-
Hi,
I have an iphone 4 and all of a sudden none of the apps will work, except the ones that came with the phone. When I open them the screen goes black then it goes back to the homescreen.
Also when I plug the phone into itunes it only gives me the option to either restore or eject the phone. Up until today I never had any problems, I sync it regularly and all the software (inc itunes) is up to date. The last time I backed it up was about a month ago when I got the phone, (a replacement as my other iphone4 had loads of problems) so I don't want to have to restore it and lose everything off it!
Any ideas? Thanks in advance!Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement. -
I came out to a black computer screen. I can see the mouse arrow but otherwise nothing. I disconnected the computer and tried turning it back on. It starts up like usual but bar going across under the apple freezes and the screen goes black. I can hear the computer running. Help!
That's just the iPod's backlight timer going off, signaling the iPod's backlight to turn off to conserve battery power.
B-rock
Maybe you are looking for
-
i want to scroll text in three lines at the same speed using any swing component,also without flickering,can anyone give me some sample codings regarding this thanks yas
-
BAdi RSR_OLAP_BADI and RSDRI_INFOPROV_READ
Hi folks, I try to use the RSR_OLAP_BADI to compute virtual key figures. These key figures are based on a lookup in an Info Cube which I do in the COMPUTE method of the implementation class. In this method I call the function module RSDRI_INFOPROV_RE
-
Steps to configure Forefront Threat Management Gateway 2010 Standard Version
Can you please guide the steps to configure Forefront Threat Management Gateway 2010 Standard Version
-
Since updating itunes with 10.4 I get an error msg stating I can't burn CDs or put videos into itunes. I tried repair option twice, uninstalled and reinstalled itunes, same problem. I do not have any CD/DVD burning software installed.
-
Why can't I open iDisk from iPad?
When I try to open iDisk by touching its icon, this happens: brief contact is made with my iDisk, then it disappears the icons page with the iDisk icon reappears. GoodReader is able to access my iDisk without any problem.