Ff comes on, I go to site w/ pics the screen goes black & then w/ with a bubble from the bottom saying recovery from igfx display failure..Chr & Op = OK

Firefox comes on, I go to a site rich w/ visual content & then the screen goes black & then white w/ with a bubble from the bottom bar saying recovery from igfx display failure..this used to happen on my Chrome browser (the Chr browser recovered spontaneously But I removed & reset it... still the problem went on & I quit using Chr for2-3 mos. There never was a problem on Opera. Hey! OPERA rule. As foe IE 8. That instrument is completely useless. Even all areon IE appears to be dead...Thanx!

Try disabling hardware acceleration in Firefox.
https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardware-acceleration#w_turning-off-hardware-acceleration

Similar Messages

  • My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    From Here
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • Trouble with mobile site. Displays for a second then screen goes black.

    Trouble with mobile site. Displays for a second then screen goes black. Using safari, 4s on Verizon. Example: m.mlb.com/lad/

    I hadn't checked the site since January or so, when it worked. It might be related to the Opening Weekend skin they have on the site, but for me, it shows the top part of the page for 3 seconds while it's loading (scrolling down is impossible) and then all of a sudden it turns black, showing nothing. It's that way for every MLB mobile site.
    At first:
    Two seconds later:
    I noticed this on 4/7/12. Does anyone NOT have this problem?
    Matt

  • My ipod touch is flashing white on and off, I hold the buttons down, and the screen goes black- but the apple logo does not come on. What do I do?

    So I have had this problem before, and know that you hold down the top Power button and the Home button, at the same time, for roughly 10 seconds, or until the apple logo comes on.
    The problem is, when I press the buttons and the screen goes black, like it's supposed to before the logo pops up, the apple logo isn't appearing.
    I was wondering if that's because my I pod touch was drained when I plugged it in to charge, and I tried to turn it on when it was still charging?
    What can I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Screen goes black, shut the lid for a few minutes, open the lid the turn on chime comes on and the screen comes back to life. The computer itself has continued to update just no screen. After a few minutes goes black again. Is logic board going bad?

    Screen goes black, shut the lid for a few minutes, open the lid the turn on chime comes on and the screen comes back to life. The computer itself has continued to update just no screen. After a few minutes goes black again. Is logic board going bad or graphic card issue? Trying to decide if computer is worth repairing as it was made in 2007.

    It does sound like you might have a faulty video connection. See if you can make a Genius Bar appointment at your local Apple Store.

  • When I try to open a PDF form from a site, my screen goes black.

    When I try to open a fillable PDF form from any web site my screen goes black and nothing further happens. I can use IE with success, but would prefer Firefox.

    You're welcome.
    Could you please click the "''Solved It''" button next to the post which solved the problem for you? This will help others searching for a solution to the same question.
    Thanks.

  • MB screen goes blk then comes back. A1181 model - inverter? LCD?

    hello
    I have got a late 2006 A1181 black MB. It works fine..until recently over these past few months the screen goes black...then it comes to life again.
    If I turn it on....it could sometimes be black...then I leave it and after a few mins it comes back to life.
    Yet other times, I can power on and its fine.....
    Then the other day it flickered so much on/of/on/off....
    I have done the resets as suggested online....to no avail.
    -you can still see the desktop if you shine a light on the screen when it goes black.
    -The screen doesnt flicker if I open and close the laptop lid up and back ....
    How do I know if its the inverter or the actual whole entire LCD screen thats failing?
    Im in no position to pay  £75 to have it looked at by someone at my local apple retailer.
    And yes its still a really good little machine. ...and Im not looking to change it. Just now confused...shall I buy a new LCD or inverter? Ive seen the tutorials online and I think I could do those fixes myself...
    Any help and advice would be great, thanks.
    Caroline

    So I did a clean install of 10.7.5 and for a day the machine had no issues. Then I used Migration Assistant to import the owner's user account. I logged into their account, deleted the temporary account I made, then rebooted. After that I tested it, and the screen DID go black on wake again.
    Based on all this, I'm thinking the problem has to be some random corrupt file. Something possibly sleep related, or possibly display related. I'm going to have to investiage that avenue next. Any ideas what software issues might cause this kind of problem? In other words, what preferences files may be causing it?

  • Why does my iphone 3gs screen goes black after reaching another party and won't come back on to press end the call

    why does my iphone 3gs screen goes black after reaching another party and won't come back on to end the call

    hi smalley3,
    Welcome to the Forums.
    The flickering issue maybe due to a bad LCD cable or in some cases, a faulty GPU (the GPU is integrated to the CPU, and the CPU is soldered to the motherboard).
    If there's still no image on the screen even after connecting an external display then you likely have a bad GPU.
    In this case, I recommend you contact support for service (and also to see if there's a consideration that can be done on the warranty repair).
    Support phone list
    Regards
     

  • Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse  thanks for your help Dave

    Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse  thanks for your help Dave

    It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

  • I have a "white screen " ,tried to hold the two buttons down and it still won't work.The screen goes dark, then comes back white.

    I have a "white screen",tried to hold the two buttons down and it still won't work.The screen goes dark, then comes back white.

    Morning Clementine Lin,
    For more information this, please see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
    Have a nice day,
    Mario

  • The screen goes black 2 or 3 secs after lifting the lid, but comes back on if I disconnect the magnetic power lead, after that it works fine with or without lead. Anyone had this problem, and is it symptomatic of a serious fault

    The screen goes black 2 or 3 secs after lifting the lid, but comes back on if I disconnect the magnetic power lead, after that it works fine with or without lead. Anyone had this problem, and is it symptomatic of a serious fault?

    It could be a software issue. I would reinstall the OS. You don't have to lose or reinstall any apps from archive and install. This way, your user folder remains intact but you get a fresh copy of the OS.

  • New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord.  Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on.

    New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord.  Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on. Sometimes holding the power button for a second is enough for it to come back on.

    I took it to the Genius Bar, and they identified it as a hardware issue. Just got it back today. Parts replaced were:
    620-5629 Display Module — Symptom: Distored/blurred/focus video issue
    605-3284 Top Case with Keyboard — Symptom: specific key(s) do not work
    So far so good. I'd suggest taking it in and not trying to work around it — it's a rare hardware issue (given the number of threads about it) and should be replaced.

  • My Macbook pro 1,2 monitor and laptop screen goes black once in a while and then comes back on

    Hello all,
         Thank you very much for taking the time to view my issue. This issue just started about a month ago, I have a 22" LCD Monitor that I have been using, when this issue started the monitor would flicker and the screen would go black, but if I turned it off for a bit then turned it back on it would come back on. After a while it just started to go black and not come back on at all, so I decided to disconnect the monitor and use the notebook screen, I thought the monitor itself was broken. The notebook screen was working fine up until the last week, it is now doing the exact same thing, when my computer wakes up from being asleep it sometimes flickers then goes black, I can still faintly see the outline of the programs I have up but it is completely black. Sometimes it is a pain to get back on and I have to force shutdown and turn it back on to get it working. I am not sure what the problem is but I really want to get it fixed.
    My Macbook Pro 1,2 is the first model made, but it was the best model available at the time. It has a Intel Core Duo 2.16GHz chip with 2GB of ram and a 160GB hard drive, it also has an ATI Radeon X1600 video card with 256mb of Vram. If anyone has any suggestions or resources I can use, I would greatly appreciate you sharing them with me.
    Thank you very much in advance!
    Sincerely,
    Saggz.

    Hey Fleurdemimi,
    Thanks for the question. I understand you are experiencing issues with your iPhone 4s. Based on the information you have provided, restoring your iPhone in recovery mode may resolve your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • None responsive ipod apple logo comes on then screen goes black

    Ive not used ipod for a while .Now it wont charge apple logo comes on then screen goes black

    After connecting to a charging source for hours try:
    iOS: Not responding or does not turn on

  • Click on the icon and a white blank page comes on, the bottom says opening but nothing happens!

    when ever i open firefox, nothing happens, just a white blank page comes on, on the bottom left, the default page is trying to open" i.e waiting for xxxxxxx to open,
    I tried re starting my computer "MAC" also quit Firefox and opened it but the problem is still there.

    Last time I updated Firefox, all of my bookmarks and saved pages were gone.
    If you have unsaved open pages you may loose them on a Firefox upgrade but you should not normally loose your bookmarks, unless for instance you do a new install and take one of the options that deletes personal information.
    I suggest as a precaution you back up your Firefox profile. This is something that is easier to do whilst Firefox is able to run; and it is good practice to do this periodically anyway; but it can still be done even when Firefox is not able to be run.
    * for instructions have a look at [[Back up and restore information in Firefox profiles]]
    * put the backup files and folders somewhere safe, where they may be found easily, but outside the Firefox program or profile paths. (Your Windows 7 Desktop is a suitable location).
    Now when I click on the Firefox icon, nothing happens. No page opens...nothing.
    Firefox not starting after an upgrade is often caused by firewalls or security programs either not recognising the new Firefox as being safe, or else blocking or even reversing changes made to your system and browser.
    Have a look at your security software and the security settings.
    *What security related software and firewall do you use ?
    * see also
    ** [[Firefox won't start - find solutions#w_firefox-will-not-start-after-updating]]_firefox-will-not-start-after-updating
    ** [[Configure firewalls so that Firefox can access the Internet]]
    **[[Firefox does not work - Common fixes to get you back up and running]]

Maybe you are looking for

  • Want to change Pricing Procedure in the sales order

    Hello I have created a sales order. It has RVVVV9 as pricing procedure. Now I recognise that the pricing procedure in the order is wrong due to incorrect CUSTOMER PRICING PROCEDURE in Customer Master data. Now I changed the CUSTOMER PRICING PROCEDURE

  • I need to reclaim Project from FCP X Trial

    Hi Last year I downloaded the FCPX Trial. I now need to access the project I created in there. But when I try to open the application it tells me that its expired and I need to purchase so I cant even see if its in there. I am happy to purchase it bu

  • Custom Theme (jquery)

    I've created a custom jquery-ui theme using ThemeRoller( http://jqueryui.com/themeroller/ ). Normally, in a html file a download the full archive(with the js , css and the images) and reference the CSS file.(jquery-ui-1.8.7.custom.css). How could i d

  • PPC software to new computer?

    Hello everyone, My name is Justin. I was wondering about transferring old software from this iMac G5 iSight edition to a newer computer, maybe a Mac mini. To be specific, the software is Adobe Creative Suite CS2 - yeah, old stuff, but we need to keep

  • CIVS-IPC-3530&6030

    Hi I am having two cisco camera ,one is CIVS-IPC-3530 and CIVS-IPC-6030, I have given them ip static ip address and the page is accessed . The problem is i cannot view live video from internet explorer 11.Though it is working in mozilla using quick t